Database Develop

x8 doesnt reboot if given reboot with nAa v11 kernel

when i give reboot, x8 shuts down and doesnt boot until i remove and replace battery. please help me to fix this problem. iam using nAa v11 kernel.

bondgold_x said:
when i give reboot, x8 shuts down and doesnt boot until i remove and replace battery. please help me to fix this problem. iam using nAa v11 kernel.
Click to expand...
Click to collapse
yes it happend with me too,,, bt i was using iRom 5 with nAa11. but now im using gingerxperia and my problem solved. so tell me which rom r u using ?
press thanx if i helped.

I'm using iRom v005 with nAa kernel 11 and everythings works great. Reboot, reboot into recovery - both works with no problem
Maybe there was something wrong during the instalation
1). Copy ROM zip file to SD,
2). Flash kernel,
3). Using CWM (which is built-in nAa kernel) do full wipe and install zip from SD.

This reboot thing is a know bug of kernel.
With nAa 11 it occurs to hang 1 each 10-15 reboots.

What was wrong ? Mini CM9 on Xperia X8

Hi everybody,
I tried yesterday to flash my phone with the new mini CM9 + nAa 04 kernel... It did not work resulting in a soft brick.
I solved this problem by flashing back to the stock rom + kernel using flashtool. My device is now working as before.
After many unfruitful research on the forum, i'm forced to ask you what wrong did I do...
My phone was (and is) configured as follow :
Kernel : stock 2.6.2.9
Rom : Android 2.1
Base Band Version : M76XX-TSNCJOLYM-53404015
Built : 2.1.1.C.0.0
Rooted
Bootloader : unlocked
Today I installed xRecovery (which is not needed if I use the Kernel E15_nAa-ics-04_2.6.29.6-nAa-ics-04).
Is it problematic if I want to use the mini CM9 rom ?
How did I do :
I started by flashing the kernel using flashtool and with the latest version kernel E15_nAa-ics-04_2.6.29.6-nAa-ics-04.
The manipulation was successful and kernel was working well.
Then, after having backed up all my settings, apps, contacts, rom and wiped off the data factory settings, I started to flash the rom with CWM (the rom had been stored before on my SD card).
Once the installation finished, the phone reboot... and reboot .... and reboot, etc...
It was only able to display the nAa kernel screen (boot loop), but nothing more.
Finally, I flashed it back to stock version to use it again... OUff
I was a bit scared by the idea of having a hard brick but finally it was just a soft brick.
What do you think about my experience ? I know many of you think that people who do not have necessary skills to do it should not do it ^^ but I want to learn and to make my phone a bit more flexible and fast.
Thank you in advance !
Nico

P'titbateau said:
Hi everybody,
I tried yesterday to flash my phone with the new mini CM9 + nAa 04 kernel... It did not work resulting in a soft brick.
I solved this problem by flashing back to the stock rom + kernel using flashtool. My device is now working as before.
After many unfruitful research on the forum, i'm forced to ask you what wrong did I do...
My phone was (and is) configured as follow :
Kernel : stock 2.6.2.9
Rom : Android 2.1
Base Band Version : M76XX-TSNCJOLYM-53404015
Built : 2.1.1.C.0.0
Rooted
Bootloader : unlocked
Today I installed xRecovery (which is not needed if I use the Kernel E15_nAa-ics-04_2.6.29.6-nAa-ics-04).
Is it problematic if I want to use the mini CM9 rom ?
How did I do :
I started by flashing the kernel using flashtool and with the latest version kernel E15_nAa-ics-04_2.6.29.6-nAa-ics-04.
The manipulation was successful and kernel was working well.
Then, after having backed up all my settings, apps, contacts, rom and wiped off the data factory settings, I started to flash the rom with CWM (the rom had been stored before on my SD card).
Once the installation finished, the phone reboot... and reboot .... and reboot, etc...
It was only able to display the nAa kernel screen (boot loop), but nothing more.
Finally, I flashed it back to stock version to use it again... OUff
I was a bit scared by the idea of having a hard brick but finally it was just a soft brick.
What do you think about my experience ? I know many of you think that people who do not have necessary skills to do it should not do it ^^ but I want to learn and to make my phone a bit more flexible and fast.
Thank you in advance !
Nico
Click to expand...
Click to collapse
Your hardware and software seems alright to me.
Steps: Don't bother about xRecovery. From stock 2.1...
Root again
Flash nAa-ics kernel
Install MiniCM9 and Gapps from first post of MiniCM9 thread
FULL WIPE -- YOU MUST DO THIS
WIPE DALVIK-CACHE TOO
Reboot and have fun
Sent from my X8 using Tapatalk 2

Flash the latest baseband ans try again
Sent from my E15 using Tapatalk 2

Full Wipe will solve the problem.
Sent from my E15i using xda app-developers app

Hi,
Thanks for your replies.
So I don't understand what was wrong as I completely wiped the system prior to flash the Rom.
I proceeded exactly like that :
1.Wipe data factory
2.Wipe cache
3.Wipe dalvik-cache
4.Format system
5.Format cache
6.Format data
7.Rom installation
8.Flash Gapps
I think I have done all the necessary steps to make it working ...
I was maybe not enough patient after installation ?
I'm going to try again today (now I know how to recover from a soft brick ).
Thank you all again.

P'titbateau said:
Hi,
Thanks for your replies.
So I don't understand what was wrong as I completely wiped the system prior to flash the Rom.
I proceeded exactly like that :
1.Wipe data factory
2.Wipe cache
3.Wipe dalvik-cache
4.Format system
5.Format cache
6.Format data
7.Rom installation
8.Flash Gapps
I think I have done all the necessary steps to make it working ...
I was maybe not enough patient after installation ?
I'm going to try again today (now I know how to recover from a soft brick ).
Thank you all again.
Click to expand...
Click to collapse
Good job dude!
just try and try lolZ
maybe you miss something like flash or root..

libera powaemm
It works ! My phone is now booting and I see the CM9 blue droid :highfive:
Special thanks to developers who allow us to have better software !
And thank you for the support you brought me.

congratulation!

P'titbateau said:
It works ! My phone is now booting and I see the CM9 blue droid :highfive:
Special thanks to developers who allow us to have better software !
And thank you for the support you brought me.
Click to expand...
Click to collapse
well well!
enjoy it! :laugh::laugh:

having the same problem
P'titbateau said:
It works ! My phone is now booting and I see the CM9 blue droid :highfive:
Special thanks to developers who allow us to have better software !
And thank you for the support you brought me.
Click to expand...
Click to collapse
So, what step u miss? I also having the same problem. Can tell me your steps? dying for CM9 in my X8 too T-T

slyzerx said:
So, what step u miss? I also having the same problem. Can tell me your steps? dying for CM9 in my X8 too T-T
Click to expand...
Click to collapse
just do what spyder-x said dude!
:laugh::laugh:

Same problem... when i try to install it again I get an error and it says my device is 16i insted of 15i ...
Then I had to flash different rom 3 times to get it working...
Didn't wipe cashe and it worked : )

first instal minicm 3.0.4
after that install minicm 3.0.5(or any nightlie) without any wiping!.

[HELP] Weird touchscreen bug

I was on GDX v28b.The touch was working fine then.
Then i installed Xperience Walkman Mod but i was getting status bar fc's.
So i again installed gdx and i started getting touch bugs.
Then i deleted ax8mt.ko and touch started working fine but occasionally work weird.
So i restored from SEUS and still got same problem.
Yes,I wiped all caches.
Can someone help me??
Is anyone getting same issues??

get flashtool and flash stock and the latest baseband..it might solve ur pro bro

I think SEUS flashes everything - kernel,rom and baseband.

...It's not a darn touchscreen bug.! Use proper Roms!
1.GingerDX
2.MiniCM series <- The one im Using. 0 Problems.
3.Froyobread
4. SO ON!
Do not use moded roms.(Moders do tend to screw something in it.)

Spevky said:
...It's not a darn touchscreen bug.! Use proper Roms!
1.GingerDX
2.MiniCM series <- The one im Using. 0 Problems.
3.Froyobread
4. SO ON!
Do not use moded roms.(Moders do tend to screw something in it.)
Click to expand...
Click to collapse
@Spevky If his phone is exhibiting signs of screen wierdness then it is a bug whether you like it or not..
Get over yourself!
@OP What kernel were you using when this first happenned? Alfs-9a by any chance? This is not a good kernel for our phones, it's a beta version at best!

Spevky said:
...It's not a darn touchscreen bug.! Use proper Roms!
1.GingerDX
2.MiniCM series <- The one im Using. 0 Problems.
3.Froyobread
4. SO ON!
Do not use moded roms.(Moders do tend to screw something in it.)
Click to expand...
Click to collapse
Hey,the bug is even on stock and GDX.
I am on stock kernel so no minicm7
Sent from my E15i using Tapatalk 2

athulele said:
Hey,the bug is even on stock and GDX.
I am on stock kernel so no minicm7
Sent from my E15i using Tapatalk 2
Click to expand...
Click to collapse
OK.. You'll have to format your sd-card in CWM.. (Backup any files you need)
In CWM - format /system, wipe data (factory reset), wipe cache and dalvik cache, then wipe battery stats.
Do the SEUS update to reset your phone.. Don't root it afterwards..
Now check your phone with stock and report back.. If you don't start with a freshly formatted sd card, chances are your problem will persist..
Once you see the problem has gone, only then should you root your phone and install another rom..

could you describe more your touchscreen bugs?

athulele said:
I was on GDX v28b.The touch was working fine then.
Then i installed Xperience Walkman Mod but i was getting status bar fc's.
So i again installed gdx and i started getting touch bugs.
Then i deleted ax8mt.ko and touch started working fine but occasionally work weird.
So i restored from SEUS and still got same problem.
Yes,I wiped all caches.
Can someone help me??
Is anyone getting same issues??
Click to expand...
Click to collapse
i want to know more about "occasionally work weird" part..

the middle and lower right part of the screen doesn't recognize touch for a while but its ok after few seconds.
Sent from my E15i using Tapatalk 2

CtrlAltDelIrl said:
OK.. You'll have to format your sd-card in CWM.. (Backup any files you need)
In CWM - format /system, wipe data (factory reset), wipe cache and dalvik cache, then wipe battery stats.
Do the SEUS update to reset your phone.. Don't root it afterwards..
Now check your phone with stock and report back.. If you don't start with a freshly formatted sd card, chances are your problem will persist..
Once you see the problem has gone, only then should you root your phone and install another rom..
Click to expand...
Click to collapse
Will try tonight
Sent from my E15i using Tapatalk 2

GingerDX v030 stuck at splash screen

I searched a lot in all threads to find a similar question or just an answer to my problem.
To start I have to tell you that I already had the v029 installed with the stock kernel and everything was fine.
Then I wanted to check some other roms and if they fit me better. So i got it from the begining. Wiped everything and installed the stock eclair with PCC. Unlocked the bootloader through a very usefull guide found here and flashed the latest nAa kernel. Then I downloaded the MiniCM9 3.0.5 Rom and installed it succesfully.
Everything is working fine but I wanted to go back to GingerDX. So I did a factory reset/wiped everything downloaded the rom for the nAa kernel and installed it. It said that it was successfuly installed. But when I try to boot my phone It stucks on the GingerDX splash screen with the animation and doing nothing. No keys working. I removed the battery to shut down, install the CM9 rom again and everything's fine.
Can you please tell what am I doing wrong? Thanks in advance.

Toumpeki said:
I searched a lot in all threads to find a similar question or just an answer to my problem.
To start I have to tell you that I already had the v029 installed with the stock kernel and everything was fine.
Then I wanted to check some other roms and if they fit me better. So i got it from the begining. Wiped everything and installed the stock eclair with PCC. Unlocked the bootloader through a very usefull guide found here and flashed the latest nAa kernel. Then I downloaded the MiniCM9 3.0.5 Rom and installed it succesfully.
Everything is working fine but I wanted to go back to GingerDX. So I did a factory reset/wiped everything downloaded the rom for the nAa kernel and installed it. It said that it was successfuly installed. But when I try to boot my phone It stucks on the GingerDX splash screen with the animation and doing nothing. No keys working. I removed the battery to shut down, install the CM9 rom again and everything's fine.
Can you please tell what am I doing wrong? Thanks in advance.
Click to expand...
Click to collapse
Wipe cache & dalvik cache while before installing
Sent from my X8 using xda app-developers app

I did and it's stuck again. I waited for 10 minutes before I closed it.

Does the kernel for CM9 supports gb?
Sent from my X8 using xda app-developers app

Wipe cache
dalvik cache
and fix permision

I have the 2.6.29.6-nAa-ics-04 kernel
I guess its not for gb. I'll download this one and check again http://forum.xda-developers.com/showthread.php?t=1350484
Thanks a lot for your time.

Toumpeki said:
I have the 2.6.29.6-nAa-ics-04 kernel
I guess its not for gb. I'll download this one and check again http://forum.xda-developers.com/showthread.php?t=1350484
Thanks a lot for your time.
Click to expand...
Click to collapse
There is a thanks button...
Press it
Sent from my X8 using xda app-developers app

Toumpeki said:
I have the 2.6.29.6-nAa-ics-04 kernel
I guess its not for gb. I'll download this one and check again http://forum.xda-developers.com/showthread.php?t=1350484
Thanks a lot for your time.
Click to expand...
Click to collapse
Any luck? I just installed the kernel on the link you posted and have the exact same problem. The boot screen stays on the splash animation. It's been there for more than 15 minutes and the animation itself is slow as hell.

Hi there..
When we switch between GB and JB kernels we must format /system /data and /cache when we flash the new kernel.

Yes, I flashed the kernel in the link and then the gingerdx rom. I did the wipe in data/cache/dalvik cache and everything else that is needed.
The only thing that occured was a problem in the format during the installation. I formated it manually before the install and it was ok.
Sent from my X8 using xda app-developers app GingerDX

sacoplastico said:
Any luck? I just installed the kernel on the link you posted and have the exact same problem. The boot screen stays on the splash animation. It's been there for more than 15 minutes and the animation itself is slow as hell.
Click to expand...
Click to collapse
Full wipe before installing.

Yes..
there must be a problem with wiping...
You might have forgot to full wipe..

Thank you everybody, I finally managed to get GingerDX running. Wiping everything actually worked.
Still took ages to boot but it is finally on!

Maybe u need naa ics kernel.
Sent from my iXperiA 8s using xda app-developers app

erulsza said:
Maybe u need naa ics kernel.
Sent from my iXperiA 8s using xda app-developers app
Click to expand...
Click to collapse
No, you cant flash gb roms with ics kernels.

[Q] [PrimeHD 10] Home button is refreshing screen

Hello. I don't know if I'm in good place to write it but I will try. I have Alfs CM7 kernel and PrimeHD 10. After some time of using it, home button stops working. It's not comming back to home screen but it's refreshing actually screen. Only factory reset is solving the problem but I'm loosing every settings, I must install apps etc. Any solutions?

kernel problem
Lotherad said:
Hello. I don't know if I'm in good place to write it but I will try. I have Alfs CM7 kernel and PrimeHD 10. After some time of using it, home button stops working. It's not comming back to home screen but it's refreshing actually screen. Only factory reset is solving the problem but I'm loosing every settings, I must install apps etc. Any solutions?
Click to expand...
Click to collapse
I think you should change the kernel or flash the latest alfs v09 kernel or use nAa kernel.....i used nAa kernel for me no bugs.....

vineeth15 said:
I think you should change the kernel or flash the latest alfs v09 kernel or use nAa kernel.....i used nAa kernel for me no bugs.....
Click to expand...
Click to collapse
WiFi is not working on nAa.

follow this
Lotherad said:
WiFi is not working on nAa.
Click to expand...
Click to collapse
First flash the nAa kernel and then go into recovery and then full wipe including format /system and then again select install zip from sd card then flash the rom and then reboot....this should work...
For me prime hd + nAa kernel everything works perfectly :good::good: