[Q] Streak 7: No configuration screen :/ - Dell Streak 7

Hello Streaks users!
I have bought a Streak 7, two weeks ago. Last friday when I turned on appears the Dell's logo but it never starts. Continues in a loop over and over again. But the main problen is that when I tried to go the configuration screen, it doesn't appears.
Simultaneously press and hold the volume up button and volume down button and without releasing the volume buttons, press and hold the power button, and nothing happens... Only the home, menu and back buttons, gets illuminated.
After several times pressing the power button, I don't know how I managed to start the system in the "safe mode" but almost all the aplications and widgets don't function.
How can I reinstall Official Android 3.2 in my Dell Streak 7 if I can't go to the configuration screen?
Thanks a lot!
Alejandro

I think what you wanting to do is a factory reset option which is to hold the Vol Up button only and press the power button. You should get a menu with the factory reset option.

Related

Ativ S Blue Screen After Boot

I have bought a Second hand Ativ S and it turned out to be dev unit, it worked for the most part(occasional crashes), but recently it broke.
After it boots it gets me to a blue screen and then powers off. I can still access the download mode and the system files via USB. But I want to do a factory reset of some sort or at least be able to use it.
Can someone help me out with this? Is there a possibility to re flash it? or is there a combination of buttons i don't know about?
nexaddo said:
I have bought a Second hand Ativ S and it turned out to be dev unit, it worked for the most part(occasional crashes), but recently it broke.
After it boots it gets me to a blue screen and then powers off. I can still access the download mode and the system files via USB. But I want to do a factory reset of some sort or at least be able to use it.
Can someone help me out with this? Is there a possibility to re flash it? or is there a combination of buttons i don't know about?
Click to expand...
Click to collapse
http://support.microsoft.com/kb/2749480 = Steps how to hard reset a WP8 Device
thanks for the help, probably that is a very useful information, but i tried those and it didn't work Is there any way I could flash the device?!
nexaddo said:
thanks for the help, probably that is a very useful information, but i tried those and it didn't work Is there any way I could flash the device?!
Click to expand...
Click to collapse
have tried to hard reset the phone by this steps?
If you can't access your phone's Settings page:
1.Turn off your phone.
2.Turn on your phone again by pressing the volume down button until you see the exclamation mark
3.Then, reset the phone by pressing the following four buttons in this order: Volume up, Volume down, Power, Volume down.
4.Your phone should now reset and restart itself. (It might take a while for the process to complete.)
And it didn't work for you? If not you have go to a Samsung store, probably they will flash you a normal OS to your phone...
Jackson5 said:
have tried to hard reset the phone by this steps?
If you can't access your phone's Settings page:
1.Turn off your phone.
2.Turn on your phone again by pressing the volume down button until you see the exclamation mark
3.Then, reset the phone by pressing the following four buttons in this order: Volume up, Volume down, Power, Volume down.
4.Your phone should now reset and restart itself. (It might take a while for the process to complete.)
And it didn't work for you? If not you have go to a Samsung store, probably they will flash you a normal OS to your phone...
Click to expand...
Click to collapse
I've tried that...it didn't work. I've also went to Samsung and apparently it made it worse. Initially my problem had a blue screen after booting but after I took it back from service the blue screen has disappeared and now the phone just powers down after the boot. THe guys at Samsung told me that the don't have the device number in their database and that the cannot do anything to it....so i'm hopping that some tool will pop-up and I'll be able to flash the device from home.
Also being an Engineering unit when I power the device based on your description it doesn't show me an exclamation mark it just goes dark and if i hook it up to the pc it shows as mass USB storage, and I can access the files on it. So there is something i'm missing for this device in particular.
Thanks anyway for your support.
Thank you again Jackson5...Really...Thank you, i've almost lost hope...after seeing your post and replying to it I said ....what the heck...lets try that again, and it worked...not with your steps exactly...I put the phone into a charger and it started to power up...Windows logo power down..and again power up and shutting down....Meanwhile I pressed Up on the volume and the exclamation mark appeared. and from there, suffice to say that I have a phone, again. So Thanks again
AW: Ativ S Blue Screen After Boot
I'm glad to hear that your phone is running again...
Sent from my GT-I8750 using Board Express
Same problem, help...
It seems Ive got the same problem with my Ativ S, I've tried everything and nothing is working...
Sorry, but can you tell me what buttons exactly and in what order did you press to get to the exclamation mark screen, please? I am sorry but I really cannot understand your explanation (your post) very well, you said:
"Windows logo power down..and again power up and shutting down....Meanwhile I pressed Up on the volume..."
Do you mean logo + power or logo + power + volume down or something else? I cannot understand the part "again power up and shutting down" either...
Thanks
aginor said:
It seems Ive got the same problem with my Ativ S, I've tried everything and nothing is working...
Sorry, but can you tell me what buttons exactly and in what order did you press to get to the exclamation mark screen, please? I am sorry but I really cannot understand your explanation (your post) very well, you said:
"Windows logo power down..and again power up and shutting down....Meanwhile I pressed Up on the volume..."
Do you mean logo + power or logo + power + volume down or something else? I cannot understand the part "again power up and shutting down" either...
Thanks
Click to expand...
Click to collapse
If the phone powers down due to blue screen or any other problem you might encounter, connecting it to a power source will make your phone restart...so basically what happens is the Phone powers up reaches the error and shuts down, but because is plugged to a power source it will power back up. So while you are plugged with the device keep pressing those buttons... Having a Dev unit apparently it worked with the Vloume Up ...
-Press the Volume Down Key + Power Key to turn on the unit
- Still hold the volume down key, the release Power Key.
- Wait for the startup screen booting with an exclamation mark " ! " then release the volume down key.
- Press the following buttons in the following order: press the volume up (high volume key) ==> press volume key down (low volume key) ==> press the power key ==> press volume down key.
- Wait a moment and look at the screen, a message such as loading new software will start the hard reset process
nexaddo said:
If the phone powers down due to blue screen or any other problem you might encounter, connecting it to a power source will make your phone restart...so basically what happens is the Phone powers up reaches the error and shuts down, but because is plugged to a power source it will power back up. So while you are plugged with the device keep pressing those buttons... Having a Dev unit apparently it worked with the Vloume Up ...
-Press the Volume Down Key + Power Key to turn on the unit
- Still hold the volume down key, the release Power Key.
- Wait for the startup screen booting with an exclamation mark " ! " then release the volume down key.
- Press the following buttons in the following order: press the volume up (high volume key) ==> press volume key down (low volume key) ==> press the power key ==> press volume down key.
- Wait a moment and look at the screen, a message such as loading new software will start the hard reset process
Click to expand...
Click to collapse
Cheers, I'm stuck in here and i can't get further.
My machine is an T899 Engineering version

Can't get the recovery menu to work after update

For the most part, I haven't had any issues with my phone after lollipop. I'm liking the new features and the new pull down quick access buttons. For some reason though, when I boot into recovery mode, I can't seem to get the menu to pop up. I've tried every combination I can think off with the power button and volume buttons but nothing seems to work. Any ideas?
I've recently had to wipe the cache on my Turbo and the recovery mode does seem to have changed. With the phone powered off, hold the power button and volume down button until you get to the bootloader. Use the volume keys to navigate the menu and press the power button to select. Select recovery and you should see the Android icon laying down. Hold the power button FIRST for about two seconds and then tap the volume up button.
Yes, if you're wiping the cache it will take a long time. Do not freak out! :good: The ETA should be about 20+ minutes.
I've done it before on kitkat and know that it takes forever. The first time I did it though I was flipping out cause I thought it was deleting everything haha.
I did finally get it to come up using that method, and your right it has changed. You have to be really accurate when holding the power button and using the vol up arrow because I was trying that before and never could get it to come up.
Anyway thanks for the help.
After lolipop update it is reversed. Hold power button and tap on up volume... For sure
Sent from my XT1254 using Tapatalk

[HELP] Phone rebooting endlessly

Hello. I have a Huawei W1 running 8.1 GDR1 and yesterday, it just started rebooting endlessly every 5 minutes, and it always took the date back to 8:08 AM 8/27. I tried to hard reset on the about section but it just restarted normally without wiping anything. Tried to do the - and + volume buttons combination but the screen with the exclamation mark disappears as soon as I press the first button. There's no way to hard reset this phone and I don't have any other idea to fix it. What can I do?
How to Factory Reset:
Go to Start > Application list > Settings.
Then scroll to the bottom and choose About.
Tap on Reset your phone.
To confirm the reset tap Yes.
It will take a few minutes to restore the default settings, then your phone will restart.
--- Hard Reset ---
Option 1:
Press and hold the Camera + Volume Down + Power buttons at the same time.
Then release the Power button when the phone vibrates.
After that, release the Camera button and Volume Down when you are prompted on the Format screen option.
Then press Windows button twice to confirm.
Option 2:
Turn your phone off.
Then press and hold the power key and release it when it vibrates.
Press and hold the Volume Down button until the exclamation mark is displayed.
Then input the follow sequence of keys: Volume Up > Volume Down > Power > Volume Down.
dxdy said:
How to Factory Reset:
Go to Start > Application list > Settings.
Then scroll to the bottom and choose About.
Tap on Reset your phone.
To confirm the reset tap Yes.
It will take a few minutes to restore the default settings, then your phone will restart.
--- Hard Reset ---
Option 1:
Press and hold the Camera + Volume Down + Power buttons at the same time.
Then release the Power button when the phone vibrates.
After that, release the Camera button and Volume Down when you are prompted on the Format screen option.
Then press Windows button twice to confirm.
Option 2:
Turn your phone off.
Then press and hold the power key and release it when it vibrates.
Press and hold the Volume Down button until the exclamation mark is displayed.
Then input the follow sequence of keys: Volume Up > Volume Down > Power > Volume Down.
Click to expand...
Click to collapse
I tried all of that, to no avail. In the about section, the phone just reboots and doesn't wipe anything, and the other methods just don't work.

[Q] WTF!

Just got my new N6, was setting it up, got the system update to 5.1 which I downloaded. Until here, everything seemed fine, however, after installing, I got an error message and since then, all it's doing is "Android is starting..."
Where did I go wrong? Called Moto CS which was a joke! I'll call Expansys from where I got the phone. But there has to be an easier solution.
Anyone? Thanks in advance.
If its the first boot after updating, it might take some time. Else try to factory reset from the recovery.
Turn OFF Nexus > Press and hold Vol Up button + Power button. Use Vol Down button to select Recovery and Power button to choose it. When the Android with Red triangle appears, press and hold Power button and tap on Vol Up. Now choose Factory reset option.
Thank you, but could not turn it off. Trying to power + vol up didn't do anything, however, power + vol down gave the fastboot mode from where I chose recovery, but it said no command was found
I think that means you have no custom recovery. Taken from another site:
"Press and hold the Power key and the Volume up key for around three seconds and then let go of the Volume up key, but keep pressing Power.
You should see the Android system recovery options pop up at the top of the screen. Use the Volume keys to highlight the options and the Power key to select the one you want."
Try this from the recovery screen. I think there is a power off option or maybe a factory reset option.
I'll give it a try and post am update, thank you.
Yeah simply pressing and holding power down then Pressing volume up once while holding power will give you the option to factory data reset. During startup it'll take some time for the first boot, some report 10 mins, be patient.
Sent from my Nexus 6 using Tapatalk
Holding power and vol up doesn't do anything for me! Why is it doing that?!
It's power and vol down. it boots you into the bootloader and there you can choose functions with vol up and down, and select it with power.
I did the factory reset, but it's still stuck in that same cycle. Called Motorola who advised to ask the merchant for a replacement. I called Expansys (from where I bought it), and was informed that I have to send it in first, then they will determine what the fault is and then I'll get the replacement, seriously?!
I called my AMEX and asked them to handle it.

Replaced LCD screen, now stuck in boot loop.

Hello everyone.
Last night I took to the journey of replacing my screen on my moto x. After carefully piecing all of the parts back together, something weird happened.
The phone seemed to start up normally, with the traditional M logo, and then goes into the boot animation. It'll sit there booting for a good minute, and then will make a small buzz, the boot animation will freeze in the middle of a frame, and then it'll shut off and redo the same process.
I was wondering if anyone has had this issue, and has found a fix yet. Thank you in advance
Did you try to make a hard reset at your phone? Make a hard reset and see if the issue remains.
To do this,
With the phone powered off, press and hold the Volume Down button and the Power button at the same time for about 3 seconds.
From the Boot Mode Selection Menu screen, use the Volume Down button to scroll to Recovery, and press Volume Up to select.
When the screen with the Android logo appears, press and hold the Power button, then press and release Volume Up to display the menu options.
Use the volume keys to scroll to "wipe data/factory reset" and press the Power key to select it.
Scroll down to "Yes - erase all user data" and press the Power key to select it.

Categories

Resources