Replaced LCD screen, now stuck in boot loop. - X 2014 Q&A, Help & Troubleshooting

Hello everyone.
Last night I took to the journey of replacing my screen on my moto x. After carefully piecing all of the parts back together, something weird happened.
The phone seemed to start up normally, with the traditional M logo, and then goes into the boot animation. It'll sit there booting for a good minute, and then will make a small buzz, the boot animation will freeze in the middle of a frame, and then it'll shut off and redo the same process.
I was wondering if anyone has had this issue, and has found a fix yet. Thank you in advance

Did you try to make a hard reset at your phone? Make a hard reset and see if the issue remains.
To do this,
With the phone powered off, press and hold the Volume Down button and the Power button at the same time for about 3 seconds.
From the Boot Mode Selection Menu screen, use the Volume Down button to scroll to Recovery, and press Volume Up to select.
When the screen with the Android logo appears, press and hold the Power button, then press and release Volume Up to display the menu options.
Use the volume keys to scroll to "wipe data/factory reset" and press the Power key to select it.
Scroll down to "Yes - erase all user data" and press the Power key to select it.

Related

[Q] Streak 7: No configuration screen :/

Hello Streaks users!
I have bought a Streak 7, two weeks ago. Last friday when I turned on appears the Dell's logo but it never starts. Continues in a loop over and over again. But the main problen is that when I tried to go the configuration screen, it doesn't appears.
Simultaneously press and hold the volume up button and volume down button and without releasing the volume buttons, press and hold the power button, and nothing happens... Only the home, menu and back buttons, gets illuminated.
After several times pressing the power button, I don't know how I managed to start the system in the "safe mode" but almost all the aplications and widgets don't function.
How can I reinstall Official Android 3.2 in my Dell Streak 7 if I can't go to the configuration screen?
Thanks a lot!
Alejandro
I think what you wanting to do is a factory reset option which is to hold the Vol Up button only and press the power button. You should get a menu with the factory reset option.

Can't get the recovery menu to work after update

For the most part, I haven't had any issues with my phone after lollipop. I'm liking the new features and the new pull down quick access buttons. For some reason though, when I boot into recovery mode, I can't seem to get the menu to pop up. I've tried every combination I can think off with the power button and volume buttons but nothing seems to work. Any ideas?
I've recently had to wipe the cache on my Turbo and the recovery mode does seem to have changed. With the phone powered off, hold the power button and volume down button until you get to the bootloader. Use the volume keys to navigate the menu and press the power button to select. Select recovery and you should see the Android icon laying down. Hold the power button FIRST for about two seconds and then tap the volume up button.
Yes, if you're wiping the cache it will take a long time. Do not freak out! :good: The ETA should be about 20+ minutes.
I've done it before on kitkat and know that it takes forever. The first time I did it though I was flipping out cause I thought it was deleting everything haha.
I did finally get it to come up using that method, and your right it has changed. You have to be really accurate when holding the power button and using the vol up arrow because I was trying that before and never could get it to come up.
Anyway thanks for the help.
After lolipop update it is reversed. Hold power button and tap on up volume... For sure
Sent from my XT1254 using Tapatalk

[HELP] Phone rebooting endlessly

Hello. I have a Huawei W1 running 8.1 GDR1 and yesterday, it just started rebooting endlessly every 5 minutes, and it always took the date back to 8:08 AM 8/27. I tried to hard reset on the about section but it just restarted normally without wiping anything. Tried to do the - and + volume buttons combination but the screen with the exclamation mark disappears as soon as I press the first button. There's no way to hard reset this phone and I don't have any other idea to fix it. What can I do?
How to Factory Reset:
Go to Start > Application list > Settings.
Then scroll to the bottom and choose About.
Tap on Reset your phone.
To confirm the reset tap Yes.
It will take a few minutes to restore the default settings, then your phone will restart.
--- Hard Reset ---
Option 1:
Press and hold the Camera + Volume Down + Power buttons at the same time.
Then release the Power button when the phone vibrates.
After that, release the Camera button and Volume Down when you are prompted on the Format screen option.
Then press Windows button twice to confirm.
Option 2:
Turn your phone off.
Then press and hold the power key and release it when it vibrates.
Press and hold the Volume Down button until the exclamation mark is displayed.
Then input the follow sequence of keys: Volume Up > Volume Down > Power > Volume Down.
dxdy said:
How to Factory Reset:
Go to Start > Application list > Settings.
Then scroll to the bottom and choose About.
Tap on Reset your phone.
To confirm the reset tap Yes.
It will take a few minutes to restore the default settings, then your phone will restart.
--- Hard Reset ---
Option 1:
Press and hold the Camera + Volume Down + Power buttons at the same time.
Then release the Power button when the phone vibrates.
After that, release the Camera button and Volume Down when you are prompted on the Format screen option.
Then press Windows button twice to confirm.
Option 2:
Turn your phone off.
Then press and hold the power key and release it when it vibrates.
Press and hold the Volume Down button until the exclamation mark is displayed.
Then input the follow sequence of keys: Volume Up > Volume Down > Power > Volume Down.
Click to expand...
Click to collapse
I tried all of that, to no avail. In the about section, the phone just reboots and doesn't wipe anything, and the other methods just don't work.

[Q] WTF!

Just got my new N6, was setting it up, got the system update to 5.1 which I downloaded. Until here, everything seemed fine, however, after installing, I got an error message and since then, all it's doing is "Android is starting..."
Where did I go wrong? Called Moto CS which was a joke! I'll call Expansys from where I got the phone. But there has to be an easier solution.
Anyone? Thanks in advance.
If its the first boot after updating, it might take some time. Else try to factory reset from the recovery.
Turn OFF Nexus > Press and hold Vol Up button + Power button. Use Vol Down button to select Recovery and Power button to choose it. When the Android with Red triangle appears, press and hold Power button and tap on Vol Up. Now choose Factory reset option.
Thank you, but could not turn it off. Trying to power + vol up didn't do anything, however, power + vol down gave the fastboot mode from where I chose recovery, but it said no command was found
I think that means you have no custom recovery. Taken from another site:
"Press and hold the Power key and the Volume up key for around three seconds and then let go of the Volume up key, but keep pressing Power.
You should see the Android system recovery options pop up at the top of the screen. Use the Volume keys to highlight the options and the Power key to select the one you want."
Try this from the recovery screen. I think there is a power off option or maybe a factory reset option.
I'll give it a try and post am update, thank you.
Yeah simply pressing and holding power down then Pressing volume up once while holding power will give you the option to factory data reset. During startup it'll take some time for the first boot, some report 10 mins, be patient.
Sent from my Nexus 6 using Tapatalk
Holding power and vol up doesn't do anything for me! Why is it doing that?!
It's power and vol down. it boots you into the bootloader and there you can choose functions with vol up and down, and select it with power.
I did the factory reset, but it's still stuck in that same cycle. Called Motorola who advised to ask the merchant for a replacement. I called Expansys (from where I bought it), and was informed that I have to send it in first, then they will determine what the fault is and then I'll get the replacement, seriously?!
I called my AMEX and asked them to handle it.

Note 5 volume button broke stuck in safemode.

Hi my volume button down is broken and everytime it boots it's in safemode.
Whenever trying to access recovery it normally boots up when buttons are pressed.
Booting into download mode freezes it, I have to do a hard reboot by pressing all the buttons.
Volume/power button work fine when in use.
I've opened up my phone to disconnect my volume button it stills boots up in safemode.
I've tried 2 new roms still in safemode.
Hello brother,
Even you flash 2 new roms still booting up safe mode, bad seen
i feel your volume down button was keep pressed maybe,,,,,maybe (it should be b coz of dust or something else).
to be confirm is that your volume button broken or pressed follow the steps below
1. switch on your mobile release the power key and Press again the power key and wait till finish the boot, (if the device get restarted it means we can confirm your volume down button was pressed & hold)
2. press home button & power button check if the device is going to download mode ( if you stuck press power button u will get exit)
how ever try to clean the volume down button inside and pull slightly. after turn on your mobile.
if your damn sure volume button was broken not working at all, then lets think about it

Categories

Resources