Related
Dear Guru's...
I've flashed the SGS, with JS3 from samfirmware & odin...
Everything looks fine until reboot...
The phone keeps vibrating and do have the following error in recovery mode : 'Update media Can't mount dbdata..."
Conclusion it doesn't boot at all...
Any clues on how to solve that ?
ManyMany Thanks!
can u get recovery mode working ? if so try wipe cache and factory reset.
azzledazzle said:
can u get recovery mode working ? if so try wipe cache and factory reset.
Click to expand...
Click to collapse
Recovery is working, But i do have the error here : " Your storage is not prepared yet etc etc etc.."
And download mode also working...
Is there any rom that I can put ?
if you can get download mode working you can flash another ROM thru Odin, start of on a stock ROM then work your way back to a custom ROM if thats what u want.
http://forum.xda-developers.com/showthread.php?t=846913
I've got the same problem. Phone boots in both download and Recovery mode, but it cannot access internal SD since it was formatted in Ext4 by the lagfix (yes, I forgot to bring it back before using Odin).
Is there any way to solve this without sending the phone to Samsung?
azzledazzle said:
if you can get download mode working you can flash another ROM thru Odin, start of on a stock ROM then work your way back to a custom ROM if thats what u want.
http://forum.xda-developers.com/showthread.php?t=846913
Click to expand...
Click to collapse
The thing is " I use a stock rom from samfirmware...."...
flashing back to stock rom should remove the ext4 lagfix. did for me anyway.
link for stock firmware is in post above ^^^^
flash it again, and do re partition
azzledazzle said:
flash it again, and do re partition
Click to expand...
Click to collapse
Did that !
I'll try to do it with csc and modem file...
what is reset EFS Phone ?
I probably solved. I'm going to make a FULL flash to JPU with three files and PIT, then I'll upgrade to JS3, then will swith to a custom ROM.
This should work
sorry my mistake i assumed you already had 3 files and pit ... yeah that should work
dont tick EFS just the re partition and auto reboot f. reset time
matticala said:
I probably solved. I'm going to make a FULL flash to JPU with three files and PIT, then I'll upgrade to JS3, then will swith to a custom ROM.
This should work
Click to expand...
Click to collapse
I'll also try the 3 files method...
keep posted... download takes time !
Indeed solved
HOORAY !!!! i bet your heart was pumping out your chest lol
azzledazzle said:
HOORAY !!!! i bet your heart was pumping out your chest lol
Click to expand...
Click to collapse
Do you have any idea the CSC to you for last JS3 ?
should be included with the firmware u downloaded ??
azzledazzle said:
should be included with the firmware u downloaded ??
Click to expand...
Click to collapse
tHERE IS JUST ONE TAR FILE???
you can flash with just one file. jus put the .tar file into the PDA part of odin. and thats all u need to do. no pit no csc no nothing just PDA
Reboot problems also
Hi! I was just wondering is this method going to work even I have custom rom (Darkys extreme edition 9.0.2) installed ?
Only asking because something went terribly wrong, and phone just keeps rebooting all the time. So with odin + I9000XXJPY (stock firmware) everything goes back to normal? and after that I can start all over to see what went wrong
isokissa said:
Hi! I was just wondering is this method going to work even I have custom rom (Darkys extreme edition 9.0.2) installed ?
Only asking because something went terribly wrong, and phone just keeps rebooting all the time. So with odin + I9000XXJPY (stock firmware) everything goes back to normal? and after that I can start all over to see what went wrong
Click to expand...
Click to collapse
Edit: all worked no worries anymore
My Galaxy Ace is stuck in a reboot loop after trying to flash 2.3.6 onto it, when it had 2.3.5 on it previously.
I've used ODIN and no matter what firmware I try to flash onto it, it just goes into a reboot loop.
Any idea how to fix it?
Did you try to do a wipe?
vkanamekuran said:
Did you try to do a wipe?
Click to expand...
Click to collapse
A wipe worked! Thanks!
how to do a wipe please tell
mor1228 said:
how to do a wipe please tell
Click to expand...
Click to collapse
press down home button and then power on phone ...--> you will enter into recovery mode .
select wipe with help of volume keys and there you go out of bootloop
My Galaxy Ace is also in some sorta reboot loop.
Everything was working fine with it (phone is rooted and CWM installed) until I did a phone reset because I was giving the phone to my gf. After doing this the phone reboots, the blue samsung logo plays (without sound) and then repeats ad-infinitum. I can get into recovery mode and download mode ok and I've tried wipe and even restored a CWM backup (it says it was successful) but the phone just keeps rebooting. I can see the phone in odin but I've never tried to flash anything onto it and quite frankly I'm unsure whether it would just make things worse (if it needs to go back to Samsung for repair). Any help would be appreciated...
If you have cwm ..why dont you download some custom rom like cm7and flash it ..that would bring your phone back to life ...then you can downgrade to stock rom if you want ...and btw in cwm try cache partition , clear data /factory reset and clear dalvik cache ..see if it boots after you do this ..
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
when i always flash by odin or by cwm i always do wipe , wipe cache and wipe dalvik, this helps me everytime
I managed to flash a firmware from samfirmware and it fixed the reboot.
Now my issue is when I connect to Kies, it says there's an updated firmware for the phone but it fails every attempt to install it. I went back to samfirmware and found this firmware: S5830ZSKPD ## but when I download and extract it there's only 1 x MD5 file and 1 x DLL file?! The other firmware had the 4 or 5 files needed to include in Odin... any ideas guys?
I think its a "one package file " ..I forgot the correct name but there is some option like that in odin ..dont worry it contains all the required files ..and if you are scared to do it then go to you tube ..there are many tutorials showing it then...
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
rogers4759 said:
I think its a "one package file " ..I forgot the correct name but there is some option like that in odin ..dont worry it contains all the required files ..and if you are scared to do it then go to you tube ..there are many tutorials showing it then...
Click to expand...
Click to collapse
Yep, that's exactly what it was, thanks again.
Unfortunately with this firmware, Kies doesn't recognise it and provides no info.
I flashed back to the older firmware... I'll just have to keep experimenting I guess.
for flashing with odin --> http://forum.xda-developers.com/showthread.php?t=1225493
many people says, don't upgrade the firmware with KIES.
dianpadi said:
for flashing with odin --> http://forum.xda-developers.com/showthread.php?t=1225493
many people says, don't upgrade the firmware with KIES.
Click to expand...
Click to collapse
Well I could flash it with Odin if I had the firmware but I don't.
It appears it's not available on SamFirmware.com
Do you know where I can download the following firmware?
PDA:KPD / PHONE:KPD / CSC:KPC (THL)
Thanks
Lol I cant understand those firmwares ..can you tell me which version of android you want like 2.3.4/2.3.5/2.3.6 ...then ill be able to help you wanr
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
Thanks anyway but I managed to find the firmware online and flashed it using Odin.
Now Kies says I'm using the latest which is a good start : )
Now I just need to find a way to root my SGS2 GT-I9100T
U can try a custom ROM from the Developer's forums here.
I also once stucked in the Reboot Loop..............
But then I installed a custom or if you want features from a official Rom, you can install Stock Based custom ROm from the Developer forums of Galaxy Ace. Really good Rom have been made by the developers
In the chance that someone else is looking for this latest OEM firmware update:
PDA:KPD / PHONE:KPD / CSC:KPC (THL)
It can be downloaded from: http://translate.googleusercontent....flgljh&usg=ALkJrhiMpHV83dugh4RGwhKpyjIrYIgn2Q
It is in "one part file" format and can be flashed using Odin.
whatever may be the problem ......just rem to keep a backup of ur previously used rom and just flash it with cwm...
Progress?
Sent from my GT-S5830 using xda premium
Read all the previous no way out loop boot
Hi every body
i have installed cwm, custum firmware, every thing goes ok
tryed to use simlock remover, no message, turned off the Galaxy Ace but after rebooting, a continuous loop boot, no acces to recovery, flashing on wath ever firmware version with odin success but on rebooting the loop is back, help please.
PS : while flasing with odin : "big partition size!!"
Hi,
I came from an LG 2x, so I thought rooting my device in order to have some extra authorizations was no big deal. I first tried with pc software Unlockroot, but it failed in the process.
Being my GB 236 Note quite dirty I wanted to do some extra backup and cleanup. So I googled and stopped at rootyourgalaxynote.com, I tried the first ROOT method, not working, I tried the second method with pc ODIN 3.04 and abyss kernel 42, ODIN says it worked, note reboots but it stops at Samsung galaxy Note Gt-N7000 with yellow triangle. shocked, I didnt really expect that! After reading a little bit else, I went to sammobile downloaded italian gb 236 stock (the version I had befor kernel flashing) and tried to flash with PC Odin. It Failed. Device still gets in download mode. But now I'm seriously worried. What can I do?
[UPDATE]: I tried using Odin 1.85 and the same gb 236 stock rom but it stops half the factoryfs.img flashing...please explain me what's happening. I don't really want to bring it in assistance and lose my warranty
strangermyself said:
Hi,
I came from an LG 2x, so I thought rooting my device in order to have some extra authorizations was no big deal. I first tried with pc software Unlockroot, but it failed in the process.
Being my GB 236 Note quite dirty I wanted to do some extra backup and cleanup. So I googled and stopped at rootyourgalaxynote.com, I tried the first ROOT method, not working, I tried the second method with pc ODIN 3.04 and abyss kernel 42, ODIN says it worked, note reboots but it stops at Samsung galaxy Note Gt-N7000 with yellow triangle. shocked, I didnt really expect that! After reading a little bit else, I went to sammobile downloaded italian gb 236 stock (the version I had befor kernel flashing) and tried to flash with PC Odin. It Failed. Device still gets in download mode. But now I'm seriously worried. What can I do?
[UPDATE]: I tried using Odin 1.85 and the same gb 236 stock rom but it stops half the factoryfs.img flashing...please explain me what's happening. I don't really want to bring it in assistance and lose my warranty
Click to expand...
Click to collapse
First you should t have flash abyss through odin since now you are not rooted and do t have the warranty too, the counter of flashes increased to 1 (look at the download mode small text), for rooting you can use chainfire's tool (in the cf-root kernel thread look for it in devolepment section) next get a stock rooted kernel and flash using the tool (read instructions).
For now use pc odin 1.87 and get a firmware 2.3.6 use the pc odin select the file on PDA and flash it, make sure phone is charged 100% and press start, if it doesn't work then uninstall drivers, reboot machine, reinstall them and kill kies process if present in task manager and then goto download mode connect USB and open pc odin wait for the port to be ready aka green and select file then start.... you should be fine its a soft brick afterall.
Sent from my GT-N7000 using Tapatalk 2
Yeah I know atm I don't have system nor root nor warranty.
I tried odin 1.87 with the stock rom from sammobile but at one point or another is it cache.img or factoryfs.img, it fails (I also uninstalled kies and drivers and reinstalled them, i also tried installing only drivers, for at&at note, but it doesn't let me). I'm gonna download another stock rom, I just hope in some way I soon solve the thing, given that I also don't know how much charge is left and if the phone still gets charged. it just displays an idle circle near an empty battery when connected to pc or A\C cable.
strangermyself said:
Yeah I know atm I don't have system nor root nor warranty.
I tried odin 1.87 with the stock rom from sammobile but at one point or another is it cache.img or factoryfs.img, it fails (I also uninstalled kies and drivers and reinstalled them, i also tried installing only drivers, for at&at note, but it doesn't let me). I'm gonna download another stock rom, I just hope in some way I soon solve the thing, given that I also don't know how much charge is left and if the phone still gets charged. it just displays an idle circle near an empty battery when connected to pc or A\C cable.
Click to expand...
Click to collapse
When connected to charger make sure phone is off the battery meter will show as soon as you connect, case it doesnt leave it for like 3 hours is fine... next about that ROM redownload. The package cleanup you temp directories in PC and try again if still goto recovery abyss I guess? Wipe everything and use the mount option and format partitions I would recommed you to have repartition but I dont have the file you can look for ot in forum its. PIT file download fireup odin select it in PIT section and see if repartitioning is shocked, of so select firmware as PDA and flash again.
Sent from my GT-N7000 using Tapatalk 2
REVERSiN said:
... if still goto recovery abyss I guess? Wipe everything and use the mount option and format partitions I would recommed you to have repartition but I dont have the file you can look for ot in forum its. PIT file download fireup odin select it in PIT section and see if repartitioning is shocked, of so select firmware as PDA and flash again.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thx for your prompt answer, but I really didn't catch this part, if it still fails I must go in recovery and wipe cache and dalvik cache?I don't have CWM installed as rooting was the first flashing I tried on NOTE, so I don't have recovery installed. Since it stopped in the middle of flashing factoryfs.img, my Note is now displaying sth like 'updrading went wrong, try recovery mode in Kies': can it help in anyway? The PIT file and procedure are the same that are used for the EMMC bug?
strangermyself said:
[UPDATE]: I tried using Odin 1.85 and the same gb 236 stock rom but it stops half the factoryfs.img flashing...please explain me what's happening. I don't really want to bring it in assistance and lose my warranty
Click to expand...
Click to collapse
If you are stcuk at factoyfs.img I think you have got a super Brick
use this link and follow the instructions given.. Worked for me
http://forum.xda-developers.com/showthread.php?t=1682444
Whiskeyjack4855 said:
If you are stcuk at factoyfs.img I think you have got a super Brick
use this link and follow the instructions given.. Worked for me
http://forum.xda-developers.com/showthread.php?t=1682444
Click to expand...
Click to collapse
Dude its a GB rom not superbrick bug in it and he didn't mention LPY yet.
Sent from my GT-N7000 using Tapatalk 2
strangermyself said:
Thx for your prompt answer, but I really didn't catch this part, if it still fails I must go in recovery and wipe cache and dalvik cache?I don't have CWM installed as rooting was the first flashing I tried on NOTE, so I don't have recovery installed. Since it stopped in the middle of flashing factoryfs.img, my Note is now displaying sth like 'updrading went wrong, try recovery mode in Kies': can it help in anyway? The PIT file and procedure are the same that are used for the EMMC bug?
Click to expand...
Click to collapse
Sorry for tea doubled post its a dumb app X's
You wipe using the CWM file in the Iss root section, and a normal recovery wipe would do too (aka restore defaults)
Sent from my GT-N7000 using Tapatalk 2
Hi REVERSIN,
Thx. I was starting to fear it could be sth more than a soft brick. Can the initial use of unlockroot have caused anything (at least a week ago, Note still working after that)?
Sorry but I really can't understand what procedure should I follow since these initial attempts at flashing stocks failed. Should I try to flash CWM? What is the ISS root section (is it in the forum)? Where can i do a normal recovery wipe from? CWM I guess..
THX for your help
strangermyself said:
Hi REVERSIN,
Thx. I was starting to fear it could be sth more than a soft brick. Can the initial use of unlockroot have caused anything (at least a week ago, Note still working after that)?
Sorry but I really can't understand what procedure should I follow since these initial attempts at flashing stocks failed. Should I try to flash CWM? What is the ISS root section (is it in the forum)? Where can i do a normal recovery wipe from? CWM I guess..
THX for your help
Click to expand...
Click to collapse
If you have the stock recovery, restore default wipes everything.
If you have stock re every and want CWM temporary just to wipe goto n7000 devolepment and check how to root by dr.ketan and get files there
If you have CWM then wipe data, wipe cache, wipe dalvik.... and try. Old download another firmware like kk5.... something else not the new LC1 LX1 releases.... (Latest GB) get an old one to get root easly
Sent from my GT-N7000 using Tapatalk 2
Hi and sry if my post is like many others, but i need strait answers for my particular software version.
So i am running Galaxy Note N7000 is rooted and unlocked with Galaxy_S Unlock apk i think (was locked on SRF France)
Android Version :2.3.6
Baseband version :N7000BUKK1
Kernel version : 2.6.35.7-N7000XXKKA-CL726566
[email protected] #2
Build number :GINGERBREAD.XXKKA
My question is:
Can i upgrade the software from the phone menu Software Upgrade? it is always asking me if i want to install or not.
Can i brick my phone using this method?
If i manage to get ICS on the device will i still be able to use unlock .apk on 4.0.x ?
I use vodafone romania sim
Should i use Odin or Kies or phone upgrade from menu?
Ihave downloaded all the stock roms for my country and carrier (Vodafone)
BTW mobile odin said there is something wrong with my partition, and emmc check will leave black screen and crash after a few seconds (is this something to be worried?)
What method do you guys recommend ?
Thanx in advance !
bustard83 said:
Should i use Odin or Kies or phone upgrade from menu?
Ihave downloaded all the stock roms for my country and carrier (Vodafone)
Click to expand...
Click to collapse
from the phone it becomes OTA and lot of chances that the phone gets screwed up
BTW mobile odin said there is something wrong with my partition, and emmc check will leave black screen and crash after a few seconds (is this something to be worried?)
Click to expand...
Click to collapse
if emmc check crashes or hangs that means there are corrupted blocks.
What method do you guys recommend ?
Click to expand...
Click to collapse
it is best to upgrade via odin .. then comes kies but i am not sure if installing it will lock ur device again.
nokiamodeln91 said:
from the phone it becomes OTA and lot of chances that the phone gets screwed up
if emmc check crashes or hangs that means there are corrupted blocks.
it is best to upgrade via odin .. then comes kies but i am not sure if installing it will lock ur device again.
Click to expand...
Click to collapse
So i should go ahead and put the stoc ics firmware for my country and update with odin over my rooted gb 2.3.6, no harm will occur?
Should i put the .pit for 16GB when using odin or just put the fw in PDA and hit Start?
I asked if the unlock apk is compatible with ICS also...but i will find out soon )
Thanx
Just read first line on my signature and flash ICS using Odin
I recommend go clean(first wipe cache and data before flashing ICS) and don't wipe once you are on ICS stock kernel
After this find second link on my sign and use method 1A/1B to root.
No need to use pit, though detail instruction is there on my thread
I asked if the unlock apk is compatible with ICS also...but i will find out soon )
Click to expand...
Click to collapse
go thru this thread.. althou no personal exp
http://forum.xda-developers.com/showthread.php?t=1806486
dr.ketan said:
Just read first line on my signature and flash ICS using Odin
I recommend go clean(first wipe cache and data before flashing ICS) and don't wipe once you are on ICS stock kernel
After this find second link on my sign and use method 1A/1B to root.
No need to use pit, though detail instruction is there on my thread
Click to expand...
Click to collapse
Let me get this right:
1 go to CMWR and clear data and cash, then exit, reboot
2.go into download mode vol - + home+ power
3 connect odin and select the rom into pda
4 hit start and let it do its job, it will reboot into the new ics after that.
then my phone will probably have ICS running but no root and so i cannot use unlock apk, only if i IMEI unlock it so i can stay on stock all the way.
So after i flash stock ics using odin i shall never do a hard reset on my phone even if i do not root it?
thanx for patience and help
correct me if i am wrong at any steps.
thanx again
bustard83 said:
Let me get this right:
1 go to CMWR and clear data and cash, then exit, reboot
2.go into download mode vol - + home+ power
3 connect odin and select the rom into pda
4 hit start and let it do its job, it will reboot into the new ics after that.
then my phone will probably have ICS running but no root and so i cannot use unlock apk, only if i IMEI unlock it so i can stay on stock all the way.
So after i flash stock ics using odin i shall never do a hard reset on my phone even if i do not root it?
thanx for patience and help
correct me if i am wrong at any steps.
thanx again
Click to expand...
Click to collapse
1. yes You are on GB ROM, so safe
2.OK
3.OK
4.Not probably but it will boot to ROM which you have flash.
If you have network lock, then you have to Root your device to unlock it.
For that use 2nd link on my signature to root it.
Again here one more thin i have to clear
If you select ICS 4.0.4 to flash, then direct network unlock won't work.
For this refer to 'Toolbox' in my signature and follow tool No 18 and then 17
In case of 4.0.3, Tool No 17 only will be fine.
dr.ketan said:
1. yes You are on GB ROM, so safe
2.OK
3.OK
4.Not probably but it will boot to ROM which you have flash.
If you have network lock, then you have to Root your device to unlock it.
For that use 2nd link on my signature to root it.
Again here one more thin i have to clear
If you select ICS 4.0.4 to flash, then direct network unlock won't work.
For this refer to 'Toolbox' in my signature and follow tool No 18 and then 17
In case of 4.0.3, Tool No 17 only will be fine.
Click to expand...
Click to collapse
hmm mine is not CMWR is Android System recovery 3e... would that make any difference? in the process mentioned by you?
You mean after flashing ics?
Sent from my GT-N7000 using xda premium
dr.ketan said:
You mean after flashing ics?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
No, now on GB 2.3.6 ! I pushed vol up home and power
and it rebooted in Android System Recovery (3e)
GB is safe for wipe, even you are on stock 3e recovery, wipe cache and data/factory reset
Sent from my GT-N7000 using xda premium
dr.ketan said:
GB is safe for wipe, even you are on stock 3e recovery, wipe cache and data/factory reset
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Should i flash Hydracore v5 kernel with odin after my odin upgrade to stock ics just to be sure that no brick bug will happen to my note if i ever do a HW reset?
Yes safe kernel always safe.
Flashing kernel with Odin raise flash counter.
You can flash phillz kernel (which is also safe) from stock recovery. If you want to flash hydracore or any other later you can flash with phillz recovery without raising counter.
Sent from my GT-N7000 using xda premium
hello my samsung galaxy s advance (i9070) won boot after i installed this recovery tool an then i tried different firmware and kernels but its not working plz help
expansion11 said:
hello my samsung galaxy s advance (i9070) won boot after i installed this recovery tool an then i tried different firmware and kernels but its not working plz help
Click to expand...
Click to collapse
how did you flash? odin or dd method? and is phone name and logo coming?
Brainiac.shri said:
how did you flash? odin or dd method? and is phone name and logo coming?
Click to expand...
Click to collapse
im using odin and i see the logo noting more
can you enter recovery (vol up+menu+power) or download mode (vol down+menu+power)?
if you can get into recovery, do wipe dalvik->reboot and tell us what happens
if download - flash your country's whole rom with odin and start again
adamuadamu said:
can you enter recovery (vol up+menu+power) or download mode (vol down+menu+power)?
if you can get into recovery, do wipe dalvik->reboot and tell us what happens
if download - flash your country's whole rom with odin and start again
Click to expand...
Click to collapse
i can go in download mode and i did try stock roms and kernels bit it wont work and cant access the recovery tool
expansion11 said:
i can go in download mode and i did try stock roms and kernels bit it wont work and cant access the recovery tool
Click to expand...
Click to collapse
were you using JB or GB, accordingly flash the samsung stock ROM and after "PASS" in ODIN remove battery and factoy reset,it should work.
Brainiac.shri said:
were you using JB or GB, accordingly flash the samsung stock ROM and after "PASS" in ODIN remove battery and factoy reset,it should work.
Click to expand...
Click to collapse
i think i was using GB, and i flashed the stock rom and i how do i factory reset it when i can't get in the recovery mode?
Одг: [Q] phone won't boot
expansion11 said:
i think i was using GB, and i flashed the stock rom and i how do i factory reset it when i can't get in the recovery mode?
Click to expand...
Click to collapse
That sounds like you had jb, that happend to me when I flashed GB over JB.
Sent from Galaxy S Advance
shut_down said:
That sounds like you had jb, that happend to me when I flashed GB over JB.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
yes i had JB but that ron was not for my country so i could not connect to the mobile network so i wanted to get the right version but the download was slow so i wanted to get a diffrent kernal but then it went wrong
Одг: [Q] phone won't boot
expansion11 said:
yes i had JB but that ron was not for my country so i could not connect to the mobile network so i wanted to get the right version but the download was slow so i wanted to get a diffrent kernal but then it went wrong
Click to expand...
Click to collapse
Flash JB again. Then folow turorial how to get GB back. You have that on General I think, or on Developer part of forum. Look.
Its not gonna work if you just flashed GB, I know from my expirience.
Sent from Galaxy S Advance
shut_down said:
Flash JB again. Then folow turorial how to get GB back. You have that on General I think, or on Developer part of forum. Look.
Its not gonna work if you just flashed GB, I know from my expirience.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
Thanks that worked!
Одг: [Q] phone won't boot
expansion11 said:
Thanks that worked!
Click to expand...
Click to collapse
Sent from Galaxy S Advance
so what are you using now? GB or JB? i had that problem too...it booted well jbean and im stuck at seup wizard error pop out... i cant acceess also recovery mode but download mode is ok... im now back at Gbread but i still wanted my cp to be on JBean is there a force mothod? to pass error "unfortunately, samsung setup wizard has stoped?" i had this problem same exact one...
Still problem with booting
I have tried to flash many different firmwares. ODIN says green but the phone does not boot. Just the first logo or Samsung with some animation.. than it gets stuck there. ADB does not work then either.
I have tried to root and wipe data with different ODIN, but nothing helped. TWRP is not present on "download mode" either..
On ODIN3 v3.07 I see there there is a tickbox for "NAND ERASE ALL" but when I have it checked it fails or hands on erase state.
Could you please help me what I can do next?
I would like to have complete firmware and root and install TWRP etc. but I need to get booting up ok. I have already 15 on "custome binory download"
x-samsung said:
I have tried to flash many different firmwares. ODIN says green but the phone does not boot. Just the first logo or Samsung with some animation.. than it gets stuck there. ADB does not work then either.
I have tried to root and wipe data with different ODIN, but nothing helped. TWRP is not present on "download mode" either..
On ODIN3 v3.07 I see there there is a tickbox for "NAND ERASE ALL" but when I have it checked it fails or hands on erase state.
Could you please help me what I can do next?
I would like to have complete firmware and root and install TWRP etc. but I need to get booting up ok. I have already 15 on "custome binory download"
Click to expand...
Click to collapse
after flashing.. remove / replace your battery..
try booting in recovery by pressing vol up+home+power at the same time..
then scroll down to factory reset via vol keys..
wipe and restore factory settings..