Database Develop

[Q] Indian Tab Flashing Information ?

Could some one for benefit of Indian Tab Owners, write a step-by-step instructions or guide. Lot of information to digest for a new user including details of 1) rooting 2) installing recovery 3) flashing ... this information would be great useful for everyone.
My Tab details :
(Model: GT-P1000 | Code: INU | Version: P1000DDJK3/P1000ODDJJ1/P1000DDJJ1)

hey..even i have a galaxy tab indian version...just follow the guides that are avaliable here for rooting flashing etc...etc...and i had the same modem when i bought it but its since been upgraded to a newer version of the modem so i just updated the modem to the ...DXJM2 version..thought the asian modem would be better for me..if u want i'll post the modem.bin

Dare{D}evil said:
hey..even i have a galaxy tab indian version...just follow the guides that are avaliable here for rooting flashing etc...etc...and i had the same modem when i bought it but its since been upgraded to a newer version of the modem so i just updated the modem to the ...DXJM2 version..thought the asian modem would be better for me..if u want i'll post the modem.bin
Click to expand...
Click to collapse
Thank you for quick reply. I started compiling the files need to flashing. So far, I could do following. Please advice me whether I am on the right path or not.
1. Rooted my tab with Z4root. Now I got root permission.
2. Downloaded Odin3 v1.7.exe and s1_odin_20100803.pit for flashing
3. Downloaded Roto-JMI-Full-v2.zip and Roto-JMI-Upgrade-v2.zip
Now, using Odin PDA button, I want to flash Roto-JMI-Full-v2.zip ?
Few questions:
a) Is this correct way of flashing or I am missing something?
b) Does above flash install Recovery also ?
c) which files need for PHONE and CSC files ?
d) Which firmware best suitable for Indian Tab ?
Thank you in advance for clarifying above.

I really appreciated reply for my questions as it would allow me to move forward. I will ensure a good documentation at the end of the process for benefit of other users.

nchary05 said:
Thank you for quick reply. I started compiling the files need to flashing. So far, I could do following. Please advice me whether I am on the right path or not.
1. Rooted my tab with Z4root. Now I got root permission.
2. Downloaded Odin3 v1.7.exe and s1_odin_20100803.pit for flashing
3. Downloaded Roto-JMI-Full-v2.zip and Roto-JMI-Upgrade-v2.zip
Now, using Odin PDA button, I want to flash Roto-JMI-Full-v2.zip ?
Few questions:
a) Is this correct way of flashing or I am missing something?
b) Does above flash install Recovery also ?
c) which files need for PHONE and CSC files ?
MId) Which firmware best suitable for Indian Tab ?
Thank you in advance for clarifying above.
Click to expand...
Click to collapse
Install Adfree or something which requires root acess for installation. Once rooted download something like root explorer from market which allows you to backup the modem.bin file. Or me or somebody else can just upload the file here.
Read the post/link in the thread where you downloaded Roto's JMI rom.
Use the .pit file from Roto's link not the thing which you posted...same place where you got the same ROM file. If you are flashing first time/from another rom then use the Full v2 zip file. Else use Update v2 when flashing from one of Roto's rom.
Connect the tab to your pc, reboot and go into download mode...press power+vol down button while rebooting...a yellow triangle icon with an android digging will come up...to get out of download mode,just keep the power button pressed till it rebooted normally.
Once in download mode, open up Odin and check that the yellow com box option is on. Check repartition option to ensure everything is wiped and you have a fresh install from scratch.
For PIT select the pit file downloaded from roto's link
For PDA select the Full.tar file
For PHONE select the modem.bin file
For CSC leave it blank...
Once done, recheck and hit start.
PLEASE CHECK ROTO'S JMI V2 THREAD IN THE DEVELOPEMENT SECTION...it has a link to howto which is old but gives some idea of how to proceed...for pit, pda, phone follow as I suggested and things will go fine...
Sent from my GT-P1000 using XDA App

Thank you.. I will do the same let you know the status....

blackheart2925 said:
Install Adfree or something which requires root acess for installation. Once rooted download something like root explorer from market which allows you to backup the modem.bin file. Or me or somebody else can just upload the file here.
Read the post/link in the thread where you downloaded Roto's JMI rom.
Use the .pit file from Roto's link not the thing which you posted...same place where you got the same ROM file. If you are flashing first time/from another rom then use the Full v2 zip file. Else use Update v2 when flashing from one of Roto's rom.
Connect the tab to your pc, reboot and go into download mode...press power+vol down button while rebooting...a yellow triangle icon with an android digging will come up...to get out of download mode,just keep the power button pressed till it rebooted normally.
Once in download mode, open up Odin and check that the yellow com box option is on. Check repartition option to ensure everything is wiped and you have a fresh install from scratch.
For PIT select the pit file downloaded from roto's link
For PDA select the Full.tar file
For PHONE select the modem.bin file
For CSC leave it blank...
Once done, recheck and hit start.
PLEASE CHECK ROTO'S JMI V2 THREAD IN THE DEVELOPEMENT SECTION...it has a link to howto which is old but gives some idea of how to proceed...for pit, pda, phone follow as I suggested and things will go fine...
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
I followed the steps after flashing 'full' tar, it rebooted tab, started the normally. After that, I verified that, all applications , phone (GSM) and wifi working fine.
Now my question is do I really need to flash *second* tar file ? what is it for ?

^^No. It is only for people upgrading from previous versions! You are good to go!

Now, I want to install CWM recovery. Please some one can confirm below steps:
1. Make sure to have Samsung Kies installed, and your tab at least connected once, to be sure the drivers are correct.
2. Your Tab must be Rooted.
3. If you wish to do a backup, now is the time.
4. You will need an SD Card with enough free space for the filesystem conversion, and to put the Overcome ROM on before we start. (An empty 4gb should be plenty, as long as it is empty, or close too)
5. Download and Extract the following file to your computer: http://www.apksmash.com/corodius/galaxytab.zip (Contains "Odin3 v.1.7.exe" "Overcome_Kernel_v1.0")
Now, we will Install the Kernel and perform the EXT4 filesystem conversion.
1. Turn off your Galaxy Tab.
2. Turn your Galaxy Tab on into DOWNLOAD mode (Press Volume DOWN and Power On at the same time).
3. Open Odin3 v1.7.exe on your PC.
4. Connect your Galaxy Tab to your PC via the USB cable.
5. Make Sure the ID:COM box is highlighted yellow (meaning it sees your tab).
6. Click on the PDA button and select the Overcome_Kernel_v1.0.tar file you downloaded earlier (make sure PDA is ticked after selecting the file).
7. The only boxes ticked should be:
A. Auto Reboot
B. F. Reset Time
C. The PDA tickbox
8. Click start and wait for PASS! to show highlighted green on Odin.
9. Your Galaxy Tab will Reboot, and get stuck on the Samsung Boot Screen. This is fine.
10. Turn your Galaxy Tab off by holding the power button for about 5 seconds.
11. Turn your Galaxy Tab on into RECOVERY mode (Press Volume UP and Power On at the same time).
12. The Galaxy Tab will now perform the EXT4 conversion.
13. Sit tight, depending on how much data you have, this can take quite a long time.
14. Once finished, click reboot system now (by pressing the power button).
At this point, You have installed the Overcome Kernel with CWM included and converted the Filesystem to EXT4. It has been reported that many stock ROMs will boot and run fine now, however some may not, but it just depends on your ROM etc.
http://forum.xda-developers.com/showthread.php?p=11713685.
Would be there any problem ? or is there any easy way to install CWM Recovery.

I had bricked my tab while modding battery icon and it was not booting now. Now i want to flash with the custom rom available here. I am noob to flashing so just want to confirm the steps mentioned above applicable to the bricked tab. Can somebody guide me for bircked tab.
Please mentioned the good custom rom with Ext4 conversion at the time of install. I am using indian tab.
@OP:- Sorry for hijacking this thread but find some info here for my queries

Can you get into download mode? If yes then you should be able to flash...but I would suggest checking"I bricked my tab" threads in general or developement section...
Sent from my GT-P1000 using XDA App

nchary05 said:
Now, I want to install CWM recovery. Please some one can confirm below steps:
1. Make sure to have Samsung Kies installed, and your tab at least connected once, to be sure the drivers are correct.
2. Your Tab must be Rooted.
3. If you wish to do a backup, now is the time.
4. You will need an SD Card with enough free space for the filesystem conversion, and to put the Overcome ROM on before we start. (An empty 4gb should be plenty, as long as it is empty, or close too)
5. Download and Extract the following file to your computer: http://www.apksmash.com/corodius/galaxytab.zip (Contains "Odin3 v.1.7.exe" "Overcome_Kernel_v1.0")
Now, we will Install the Kernel and perform the EXT4 filesystem conversion.
1. Turn off your Galaxy Tab.
2. Turn your Galaxy Tab on into DOWNLOAD mode (Press Volume DOWN and Power On at the same time).
3. Open Odin3 v1.7.exe on your PC.
4. Connect your Galaxy Tab to your PC via the USB cable.
5. Make Sure the ID:COM box is highlighted yellow (meaning it sees your tab).
6. Click on the PDA button and select the Overcome_Kernel_v1.0.tar file you downloaded earlier (make sure PDA is ticked after selecting the file).
7. The only boxes ticked should be:
A. Auto Reboot
B. F. Reset Time
C. The PDA tickbox
8. Click start and wait for PASS! to show highlighted green on Odin.
9. Your Galaxy Tab will Reboot, and get stuck on the Samsung Boot Screen. This is fine.
10. Turn your Galaxy Tab off by holding the power button for about 5 seconds.
11. Turn your Galaxy Tab on into RECOVERY mode (Press Volume UP and Power On at the same time).
12. The Galaxy Tab will now perform the EXT4 conversion.
13. Sit tight, depending on how much data you have, this can take quite a long time.
14. Once finished, click reboot system now (by pressing the power button).
At this point, You have installed the Overcome Kernel with CWM included and converted the Filesystem to EXT4. It has been reported that many stock ROMs will boot and run fine now, however some may not, but it just depends on your ROM etc.
http://forum.xda-developers.com/showthread.php?p=11713685.
Would be there any problem ? or is there any easy way to install CWM Recovery.
Click to expand...
Click to collapse
I followed above steps and could able to install CWM RECOVER.

congrats dude

maddy_in65 said:
I had bricked my tab while modding battery icon and it was not booting now. Now i want to flash with the custom rom available here. I am noob to flashing so just want to confirm the steps mentioned above applicable to the bricked tab. Can somebody guide me for bircked tab.
Please mentioned the good custom rom with Ext4 conversion at the time of install. I am using indian tab.
@OP:- Sorry for hijacking this thread but find some info here for my queries
Click to expand...
Click to collapse
can you just tel me which modem.bin are u using coz i was planning to flash but stuck on decision bcoz of modem... is it jpz or jk3? or any other

A new GB version is available DDJPA
http://forum.xda-developers.com/showthread.php?t=1226674

need PDA PIT PHONE CSC files
Kindly send me the links for downloading the PDA PIT PHONE CSC files as I could find only broken links.
My samsung tab (Version: P1000DDJK3/P1000ODDJJ1/P1000DDJJ1)) is bricked and won't boot.
Than You
nchary05 said:
Could some one for benefit of Indian Tab Owners, write a step-by-step instructions or guide. Lot of information to digest for a new user including details of 1) rooting 2) installing recovery 3) flashing ... this information would be great useful for everyone.
My Tab details :
(Model: GT-P1000 | Code: INU | Version: P1000DDJK3/P1000ODDJJ1/P1000DDJJ1)
Click to expand...
Click to collapse

can't boot into recovery

After installing the lastest "S.U.R.F.A.C.E" ROM on my GT-I9000 I'm presented with the Galaxy S logo and nothing else,
Tried and tried vol up + home + power number of times now with no avail.
Everything was working fine before was able to boot into clockwork recovery ect, unfortunately I do not have a usb cable so can't try odin any help would be great.

Grab yourself a jig from ebay or the likes, or make one
http://forum.xda-developers.com/showthread.php?t=819551

It will boot into download fine the problem I have is it won't boot into recovery is there any way I can wipe it or does it look like I am in need of a cable?

Then reflash back to stock using Odin

What were you flashing from as surface is an oxeded rom, not dexeded.

buttwad said:
What were you flashing from as surface is an oxeded rom, not dexeded.
Click to expand...
Click to collapse
clockwork recovery, i take it I messed up here so

No, meant what rom were you on before your flash? Stock?

oh sorry got the phone of a friend looked like a custom samsung rom, build version was easyprojectv2 if that rings any bells?

Looks like the problem was caused by trying to flash a odexed rom over a deodexed rom, or not having the correct bootloaders for the new rom. Normally before a flash I would return to stock (firmware from sammobiles.com) first via ODIN, do all the wipes, flash a kernel so you have a nice clean install to 'abuse'. Then I would add any custom rom from there be it by ODIN or by cwm.
Grab yourself a usb lead, nice clean flash and start again.

Ok so I've 3 file here:
APBOOT_I9000XWJW1_CL788890_REV03_user_low_ship.tar.md5
CODE_I9000XWJW1_CL788890_REV03_user_low_ship.tar.md5
KERNEL_I9000XWJW1_CL788890_REV03_user_low_ship.tar.md5
s1_odin_20100803.pit (not sure if i need this as was in the root of the odin folder not the firmware?)
Where do the other 3 file go PDA PHONE CSC???

I am also stuck on the same front, i donwloaded rom from samfirmware but it only had PDA part and nothing else, please suggest which official rom should i download??

stevek93 said:
Ok so I've 3 file here:
APBOOT_I9000XWJW1_CL788890_REV03_user_low_ship.tar.md5
CODE_I9000XWJW1_CL788890_REV03_user_low_ship.tar.md5
KERNEL_I9000XWJW1_CL788890_REV03_user_low_ship.tar.md5
s1_odin_20100803.pit (not sure if i need this as was in the root of the odin folder not the firmware?)
Where do the other 3 file go PDA PHONE CSC???
Click to expand...
Click to collapse
I would go this way mate, first grab JVT from sammobiles.com ( register first)
Flash that using ODIN
Comes with 3 files, CSC, PHONE and PDA
PDA file goes to PDA in ODIN
PHONE goes into MODEM in ODIN
CSC goes in CSC in ODIN.
Also select PIT file, should be 512 on the PIT section on ODIN, hit start and it will flash then reboot.
Then open ODIN again, connect phone and flash your KERNEL to the PDA section of ODIN.
Then grab this http://forum.xda-developers.com/showthread.php?t=1117579
and flash using cwm.
Your then on JW1 all rooted and ready to play.

put the "APBOOT_I9000XWJW1_CL788890_REV03_user_low_ship.tar" file into the PDA and flashed it. Everything seems to be working fine might stick with the stock for a while never really needed to be rooted.

ok i just popped the SIM and have no network access when i tap on Mobile Networks in the setting it tells me to insert a SIM????

the firmware i had was wrong didnt have a modem. Downloaded a jvt as buttwad said flashed an now everything working perfect now. cheers mate!

Downgrade from ics

I want to go back to gingerbread am rinning Dark Knight rom any help plz

Why God .. why ...
Flash stock through ODIN or Heimdall and thats it

If you had to ask this, it's probably a good thing you're going back to stock.
Sent from my Telus Fascinate running OneCosmics ICS!

why would you say that

Get stock ROM here.
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9000&r=-1#modelsa
You need stock ROM (3 file stock ROM), Odin & Pit512.
1. Start ODIN.
2. Select the files into the relevant places in ODIN.
3. Click repartition.
4. Put phone into download mode.
5. Connect phone to pc.
6. wait for Odin to connect to phone.
7. click start.
8. wait for ODIN to finish & for phone to reboot.
You must have pit512 and click repartition as ICS uses a different file system to Gingerbread.
You may have a boot loop after doing this. I have had this occasionally. To solve this reflash with ODIN. This time make sure repartition is unchecked and don't flash pit file.
Sorry Screen shot says scs. I meant CSC.

Humeros 4.0.3 to Gingerbread 2.3.3 possible ?

HI dudes,
I'm actually in humeros 4.0.3 ICS on my Galaxy Tab P1000 but I'd like to go back to gingerbread 2.3.3, is this possible through Odin, do I need to re-partition ?
Thanks

alucard_xs said:
HI dudes,
I'm actually in humeros 4.0.3 ICS on my Galaxy Tab P1000 but I'd like to go back to gingerbread 2.3.3, is this possible through Odin, do I need to re-partition ?
Thanks
Click to expand...
Click to collapse
Yes it is possible.
You do need to insert PIT file i.e. need to re-partition. Not only that, you need to flash dbdata.rfs as well. I did this twice before.
Follow these steps carefully you should be fine:
1a. Get your 2.3.3 flashable file ready (.rar or .md5) -- you can find it in samfirmware.com if you don't have one yet.
1b. Download this pitfile from following link:
http://forum.xda-developers.com/attachment.php?attachmentid=631856&d=1308653969
1c. Download this dbdata from the following link:
http://forum.xda-developers.com/attachment.php?attachmentid=935230&d=1331091172
2. Start Odin - put the .md5 to PDA
Put the pitfile from step 1b to the PIT
Check re-partition. Leave everything else as is.
3. Go to download mode on the G-tab, connect to ur computer
and click start on Odin. It takes about 6 to 7 minutes to do the flashing.Once done flashing it will reboot but mostlikely you still have problems with your tab.
4. Reboot to download mode again. Reset Odin (make sure re-partition unchecked), put dbdata from step 1c to PDA, leave everything else as is. Reconnect your G-Tab to computer, click start on Odin.
5. When Dbdata is successfully put into your G-tab, reboot to recovery mode, do a factory reset wipe, and data cache wipe.
Reboot system, wait for about 5 minutes for the tab to boot up, you should be all set.

go back CM9,CM10,ICS from gingerbread
Hollo Guys,
i did the upgrade GT-P1000(gingerbread) to ics by cm9mod its come and run smoothly, but i lost my wifi,pakagedata connection,myfile option and most useful options are gone, so atlast i deside to to back original version, follow are the very useful and really work for me, if anybody bowing on cm9mod and go back original version, just click as follow.
yappoe said:
Yes it is possible.
You do need to insert PIT file i.e. need to re-partition. Not only that, you need to flash dbdata.rfs as well. I did this twice before.
Follow these steps carefully you should be fine:
1a. Get your 2.3.3 flashable file ready (.rar or .md5) -- you can find it in samfirmware.com if you don't have one yet.
1b. Download this pitfile from following link:
http://forum.xda-developers.com/attachment.php?attachmentid=631856&d=1308653969
1c. Download this dbdata from the following link:
http://forum.xda-developers.com/attachment.php?attachmentid=935230&d=1331091172
2. Start Odin - put the .md5 to PDA
Put the pitfile from step 1b to the PIT
Check re-partition. Leave everything else as is.
3. Go to download mode on the G-tab, connect to ur computer
and click start on Odin. It takes about 6 to 7 minutes to do the flashing.Once done flashing it will reboot but mostlikely you still have problems with your tab.
4. Reboot to download mode again. Reset Odin (make sure re-partition unchecked), put dbdata from step 1c to PDA, leave everything else as is. Reconnect your G-Tab to computer, click start on Odin.
5. When Dbdata is successfully put into your G-tab, reboot to recovery mode, do a factory reset wipe, and data cache wipe.
Reboot system, wait for about 5 minutes for the tab to boot up, you should be all set.
Click to expand...
Click to collapse

[Q] Updated ROM Philz JB 4.1.2 XXLT6 via Odin but won't go past samsung gt-n7000

Hope you guys can help me.
Was updating my ICS (Criskelorom) to JB 4.1.2 XXLT6 ROM of Philz (PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5) via Odin 3.07. Initially had some issues but, managed to get to where Odin resulted in a PASS. On REBOOT I only get up to the Samsung Galaxy GT-N7000 screen with a yellow ! triangle at the bottom. I was able to get to both Recovery and Download modes but would never get passed to homescreen and just stay on black screen.
Did it several times and got worried I'd brick my phone so I ran the ICS zip I had stored on my SD via Recovery mode and was able to get my phone running. Still want to pursue my JB upgrade though but, not sure if I was doing it right. Any help would be much appreciated guys.
Here is what I did...
MADE SURE OF THE FF.:
1) Install USB driver for Samsung Galaxy Note to transfer files between the phone and the computer using download of KIES from Samsung site
2) Enable USB Debugging Mode on the phone to connect the Android device with the computer
3) created a back-up of my contacts only
4) charged to above 80% battery charge
5) The phone should be factory unlocked and not locked to any particular carrier - I had unlocked it during my ICS upgrade from the GB original OS
THEN FOLLOWED THE STEPS:
Step-1: Download PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 for Samsung Galaxy Note to the computer
Step-2: Download Odin 3.07 which will help to install the root package on the phone. Extract the Odin zip to get Odin3 v3.07.exe file with some other files
Step-3: Place the Galaxy Note into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot appears on the phone's screen. Now press the Volume Up button to continue to enter into Download Mode
Step-4: Run Odin3 v3.07.exe as an Administrator
Step-5: Connect the Note to the computer using USB cable while it is in the Download Mode. Wait for some time until Odin detects the phone. When the device is connected successfully, the ID: COM box in Odin will turn yellow with the COM port number. Also, the successful connection will be indicated by a message saying Added in Odin.
Note: If the Added message does not come then try another US port, try the one located at the back side of the computer. If Odin still fails to detect the device then re-install USB driver
Step-6: In Odin, click the PDA button and select the PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 file
Step-7: Now configure the Odin settings. Ensure that the Auto Reboot and F.Reset Time checkboxes are selected in Odin. As for the Re-Partition, uncheck the option
Step-8: Once everything is set, click the Start button in Odin. The installation should begin now and would take about few minutes to complete
Step-9: When the installation process is completed the phone will restart automatically. And soon a PASS message with green background will appear in the Odin indicating successful installation. After the home screen appears on the phone, unplug the USB cable from the device to disconnect it from the computer
Was able to reach Step-9 but my phone would not get to home screen.
Please help me with any advise anyone can give me?
thanks.

By the way, saw another option for Steps 5-6:
Step-5: Connect your Note N7000 with your PC using a data cable. Once the device is successfully connected, you will see a notification in Odin in the bottom left saying Added!! - if for some reason, you do not see the said notification, try another USB port. Also, check for ID:COM port being depicted by a number in yellow to make sure that you have successfully added your device.
Select the following files in Odin at their respective tabs from extracted XXLT6 firmware folder:
Step-6:
Click the PDA button to select the .tar file extracted earlier.
Click the Phone button, and select file with *modem* in its name (ignore, if this file does not file exist).
Next, click the CSC button, and select file with *csc* in its name (ignore, if this file does not file exist).
Click the PIT button to select the .pit file. (ignore, if this file does not file exist).
Ensure that Auto Reboot and F. Reset Time are the only options selected in Odin window. Also ensure to select Re-Partition checkbox only if you are using a .pit file.
Except since I only had the TAR file I ignored the rest so I assumed I was doing it right up to that point. Also, the YELLOW highlight in Odin 3.07, wasn't yellow but kind of light blue.
That was it. All I did. Still, not succesful.
Please help.
Thanks.

Phew! That's a lot to read.. The file you are trying to flash is just a kernel not a whole rom. That's why your phone after the flash has a JB kernel and ICS rom. That's why the phone does not boot. To upgrade to JB, download a stock rom from sammobile.com and flash it using Odin the same way just in PDA of Odin.

nokiamodeln91 said:
Phew! That's a lot to read.. The file you are trying to flash is just a kernel not a whole rom. That's why your phone after the flash has a JB kernel and ICS rom. That's why the phone does not boot. To upgrade to JB, download a stock rom from sammobile.com and flash it using Odin the same way just in PDA of Odin.
Click to expand...
Click to collapse
Sorry about the read. =)
Was thinking I'd rather be complete than have anyone helping need to ask more clarifications to help me. =D
Oh that's why. Thanks for the reply. I will do that.
So I need to get the WHOLE ROM from the site you mentioned. A ROM that is complete, Kernel and all. Actually I thought I did get a complete ROM. Did not realize it was just a Kernel. What would be the best way to determine if a ROM is complete? What is usually the size of the file itself? The one I downloaded was like 8MB so I thought that was pretty big. Kinda looked for awhile for that XXLT6 original JB ROM so didn't stop to think if it was just a Kernel. My bad.
By the way, are the ROMs on Sammobile rooted? Or do I need to root them?
thanks again!

izmoothski said:
Sorry about the read. =)
Was thinking I'd rather be complete than have anyone helping need to ask more clarifications to help me. =D
Oh that's why. Thanks for the reply. I will do that.
So I need to get the WHOLE ROM from the site you mentioned. A ROM that is complete, Kernel and all. Actually I thought I did get a complete ROM. Did not realize it was just a Kernel. What would be the best way to determine if a ROM is complete? What is usually the size of the file itself? The one I downloaded was like 8MB so I thought that was pretty big. Kinda looked for awhile for that XXLT6 original JB ROM so didn't stop to think if it was just a Kernel. My bad.
By the way, are the ROMs on Sammobile rooted? Or do I need to root them?
thanks again!
Click to expand...
Click to collapse
They are just stock roms, to root again use the philz kernel but for jb this time. Also use the .zip this time instead of tar file, you can flash the zip file from stock recovery itself. You can raed more in philz kernel thread
Sent from my GT-N7000 using Tapatalk

treacherous_hawk said:
They are just stock roms, to root again use the philz kernel but for jb this time. Also use the .zip this time instead of tar file, you can flash the zip file from stock recovery itself. You can raed more in philz kernel thread
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
Got it, thank you Sirs you've all been a very big help. I ran into some issues with TW right after completing the install of 4.1.2. Every darn thing was stopping even acore and TW. Was about to chicken out and go back to my safety ICS ROM when I got to read some stuff about needing to Clear/Reset on Recovery mode after any firmware flashing as well as Clearing the Cache so I did. And voila, it worked. I think I'll rest my worrying brain for now on the root. =P
I'll root it next week. I'll just have fun with it for now. Been up playing around with this for over 24hours now. Having too much fun but already drained.
Thank you again for you help!

same situation here...!!!
hello XDA ppl...
I had ICS 4.0.4 and attempted to use PhilZ-cwm6-XXLTA-ATL-5.15.0.tar.md5.
That took me to the same situation I think... kernel for JB and ICS ROM...
I power on my phone and it gets to a GT-N7000 Note + Yellow Triangle screen and NO MORE!
I can get to PhilZ Recovery Mode or ODIN Download Mode.
That´s all...
I will attempt right now what you told the creator of this thread and update if it helped.
any help is welcome...

FIXED!!!
AWESOME!!!
My bot is back again!!!
Thanks a lot guys...
This thread worked as a charm. :victory:
1. Odin 3.0.X
2. Factory Firmware
3. Flash it as PDA.
4. No yellow triangle.
5. Removed battery and waited 5 seconds.
6. recovery mode.
7. clear data/factory reset.
Done!
---------- Post added at 03:33 AM ---------- Previous post was at 03:28 AM ----------
juliowong said:
AWESOME!!!
My bot is back again!!!
Thanks a lot guys...
This thread worked as a charm. :victory:
1. Odin 3.0.X
2. Factory Firmware
3. Flash it as PDA.
4. No yellow triangle.
5. Removed battery and waited 5 seconds.
6. recovery mode.
7. clear data/factory reset.
Done!
Click to expand...
Click to collapse
Well... finally I am back to ICS.
Now gotta find a safe way to get it to JB.

juliowong said:
Now gotta find a safe way to get it to JB.
Click to expand...
Click to collapse
Safest way to get to JB with wipe (that is formatting) is to get philz kernel for ICS and then reboot to recovery do factory reset and wipe /system /data /internal storage /cache and then reboot to download mode and flash JB from odin. Else if you dont want to loose data, just boot into download mode and flash JB using odin.

juliowong said:
6. recovery mode.
7. clear data/factory reset.
Well... finally I am back to ICS.
Now gotta find a safe way to get it to JB.
Click to expand...
Click to collapse
Yeah!! May be you want to start by not wiping on a stock ICS kernel.