Hello guys, my G1 has flashed danger SPL and radio 3.22...for a long time, but today I want flash back radio back to 2.22..., but, after that, my G1 get a stuck on the first screen, it seems to bricked, I have tried every composition of keys, such as back+power and photo+power and home+power, but none of them can lead me to the 3-color screen, can anyone help me? Thanks a lot!!
Can you boot into recovery (home+power)?
....and you should not see a tri color screen. instead, you will see 3 android on skate boards (for engg. and danger spl).
I hope someone can help
Way back when, I debranded my O2 HD7 using this method : http://forum.xda-developers.com/showthread.php?t=988672&highlight=gold+card
Everything has been fine through the NoDo update until this weekend.
The first problems started when I turned the phone on. 50% of the time it would lock at the HD7 boot screen, and vibrate 4 times.
Then it started crashing a lot so I did a hard reset.
Then it failed to boot at all, crashing after the HTC screen.
Then I tried to reflash it, and got a 266 (flash write) error at around 11%.
Now the phone will ONLY boot into the Bootloader. I can't get it to the format SD card screen and I can't flash it with any image.
Thoughts / advice / sympathy welcome
I have the exact same problem...any help would be greatly appreciated...tried search and followed instructions but still stopping at 11% when trying to flash and only boots into bootloader.
Bootloader shows:
PD29110 SS-BC (4k)
SPL-3.1.2250.0(119314)
MicroP(LED) 0x07
Touch S1(v1.8,#1624
SD SANDISK 15193MB
Partition Info-v211v413
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
Click to expand...
Click to collapse
Kh3ldar said:
Thoughts / advice / sympathy welcome
Click to expand...
Click to collapse
edit. just saw you wrote Error 266, not 262. not sure which Error that is...
what does you Bootloader say?
sporty2k said:
I have the exact same problem...any help would be greatly appreciated...tried search and followed instructions but still stopping at 11% when trying to flash and only boots into bootloader.
Click to expand...
Click to collapse
what are you trying to do?
sh4d0w86.
I have HD7 (T Mobile)
Boot Loader information...
PD29*** SS-BC (4K)
SPL- 4.5 2250.0 (129966) MNG
MicroP (LED) 0x07
------------------------------------
SD SANDISK 15193MB
Partition Info-v211v413
I am stuck on bootloader now, What can i do
pull the battery. reinsert battery. power on device.
or does it still boot into SPL after doing the above?
sh4d0w86.
I did but it's coming back to the same multicoloured screen again.
Is there any way to go to Nodo update now so i can wait for the official update of Mango or if i can make my SPL4.5 to HSPL then i will be able to install custom rom.,
I dont know what are the options for me now.
I tired to install the orignal ROM, it stuck at 11% and then turn off, Now its not showing any signs of life by any chance. Looks like its bricked
tariqsdk said:
I tired to install the orignal ROM, it stuck at 11% and then turn off, Now its not showing any signs of life by any chance. Looks like its bricked
Click to expand...
Click to collapse
you need to JTAG your device then
thanks, that would be second time...
Hello
I got a HTC HD 7 that when I was updating it to mango freezed in the last step and than I got this HTC boot screen (white splash screen with HTC logo) freezes everytime I turn on the phone ( the phone vibrates 5 times everytime when I turn the phone on)
Help plzzzzzzzzzzzzz
Narseal said:
Hello
I got a HTC HD 7 that when I was updating it to mango freezed in the last step and than I got this HTC boot screen (white splash screen with HTC logo) freezes everytime I turn on the phone ( the phone vibrates 5 times everytime when I turn the phone on)
Help plzzzzzzzzzzzzz
Click to expand...
Click to collapse
so...
you can't get past the HTC Splash Screen?
looks like you'll have to flash a new ROM onto your HD7 to recover.
which HD7 do you have exactly?
with power off, hold volume down, power on.
the PD2xxxx number on the Multi-Color screen? which is it exactly?
pull battery to get out of that screen.
sh4d0w86.
HTC
Its
PD29110 SS-BC (4K)
SPL-4.5.2250.0(129966) MNG
MicroP(LED) 0x07
TOUCH S1(v1.7,#1624)
Narseal said:
Its
PD29110 SS-BC (4K)
SPL-4.5.2250.0(129966) MNG
MicroP(LED) 0x07
TOUCH S1(v1.7,#1624)
Click to expand...
Click to collapse
flash a TMOUS Shipped ROM, link in my signature.
will lose all your data, but should have a working phone afterwards.
make sure battery is at least 50% charged before flashing.
sh4d0w86.
When I tried to install that ROM, the process reached 1% maybe and than an error messege appears number 226, and now I cant turn the phone on, its only back screen, its off, also it doesnt show the red light when I try to charge it...
wow unlucky day for me....
plz help...
Narseal said:
When I tried to install that ROM, the process reached 1% maybe and than an error messege appears number 226, and now I cant turn the phone on, its only back screen, its off, also it doesnt show the red light when I try to charge it...
wow unlucky day for me....
plz help...
Click to expand...
Click to collapse
what did you try to flash?
not my intrinsicROM, i hope...
said to flash a TMOUS Shipped ROM, here.
sh4d0w86.
yes I did that, I flashed the right one
Narseal said:
yes I did that, I flashed the right one
Click to expand...
Click to collapse
which exactly?
can you still get into bootloader?
i suggest TMOUS 3.01.531.02.
sh4d0w86.
I cant get to bootloader, the phone doesnt turn on, its not working
I tried to flash 4.05.531.03
Narseal said:
I cant get to bootloader, the phone doesnt turn on, its not working
I tried to flash 4.05.531.03
Click to expand...
Click to collapse
dang. well, you could try an external charger.
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
Click to expand...
Click to collapse
so, your Bootloader should be fine.
sh4d0w86.
HTC 7 Boot problem
i updated my HTC 2 weeks ago , last night some one call me and my calling screen does not apear, so i wait afew seconds and pulled out the battery after that my phone does not bood and i just see the HTC Logo screen.
Please help me to fix my phone , tnx
also this my Phone info:
PD29100 SS-BC (4K)
SPL-5.0.2250.1(131000) MNG
MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)
wegkommst said:
i updated my HTC 2 weeks ago , last night some one call me and my calling screen does not apear, so i wait afew seconds and pulled out the battery after that my phone does not bood and i just see the HTC Logo screen.
Click to expand...
Click to collapse
you have SPL 5.0, only thing, at the moment, you can try is flashing the Shipped ROM.
link in my signature. Europe 5.00 under Mango w/ ISharing.
Don't you try a hard reset? Or try ruu
Sent from my HD7 T9292 using XDA Windows Phone 7 App
HTC HD7 Windows, HTC screen freeze
Good Afternoon,
I'm new to this forum but not totally new to ROM flashing (very basic previous experience of flashing custom ROM on HTCDesire).
My brother in law broke his phone (smashed screen/digitiser). He has replaced the samaged hardware himself but when he boots the phone it freezes at HTC screen. Have tried to reset but nothing happens. When booting and holding volume down I get the following info:
PD 29100 SS-BC (4k)
SPL-5.11.2250.0(134400) MNG
MicroP(LED) 0x07
TOUCH S1(v1.8, #1624)
SD Sandisk 61MB
Partition Info-v211v413
After reading through a few different searches I have tried to install various releases of the o2 shipped ROM (as it was originally an o2 release) but I get an error message ERROR 226 after 1%. (Noticed that someone already advised they've had error 226 but the response to it relates to Error 262). When running the Schubert ROM/Utility, on the screen where it says which image it is updating to it says "current image" but then nothing, it is blank, no current image mentioned.
It wont matter if Data is lost from the phone as he would rather it working with no data than not working at all. All help is appreciated as is explaining to me in the simplest terms possible.
Thanks in advance to any replies! :good:
I want help I have a HTC diamond2 The picture above shows the problem clearly ,is the solution for this device?., thank you
- trying to hard reset your device, manual hard reset ~ http://www.hardreset.eu/htc_touch_diamond_2_hard_reset_soft_reset_en.html
- if it does not help, the next step flash rom your device ! for guide a look at http://forum.xda-developers.com/showthread.php?t=416211
it doesn't work with me all this solution it stop at 0% or 1%
So first of all I tried to install some rom on my HTC Topaz (it wasn't the first time I change roms) and something gone bad, the installing was stuck on 0% , after the reboot the phone was stuck at launching.
I tried many suggestions that I found here on the forum, but nothing helped, I did the format+reset with MTTY.
Tried to install different roms from the bootloader but it always stuck on the 0% even tried to install them from SD card...
So now I'm in bootloader and it written -
_________________________________________
TOPA100 32M
SPL -1.33.0000
Microp-Topaz (LED) v10
TURBO HW/TURBO SW
--------------------------------------------
NO TP MFG DATA
Serial