Hi guys i need your help i have done the hard spl route but if i try and flash the rom image either from the mem card or off the computer it goes to the flashing screen but stops on 0% and stays there
Can you flash a shipped rom?
If you flash a customized rom you need to go into bootloader first.
Does your device startup?
Hi Laurentius yes i can get into bootloader then the screen clears and the percentage bar is there but it stays at 0% forever.
But when you softreset does your device startup?
vemar said:
Hi Laurentius yes i can get into bootloader then the screen clears and the percentage bar is there but it stays at 0% forever.
Click to expand...
Click to collapse
Yes i can start the phone normally and everything works ok but still the stock rom.
Just a bit more info boot screen says BLAC100 32M
SPL-1.14.000
MICROP-BLACKSTONE (LED) V6
You didn't do HARDSPL right.
Flash HARDSPL one more time and follow the steps described there in thread carefully!
Bootloader should tell you:
BLAC100 32M
SPL-1.14.Olinex
MicroP-Blackstone (LED) v6
vemar said:
Just a bit more info boot screen says BLAC100 32M
SPL-1.14.000
MICROP-BLACKSTONE (LED) V6
Click to expand...
Click to collapse
Thanks for the help will try to re-flash the bootloader again will let you know the out come.
Hi Laurentius26
Many thanks for your help the info was spot on i re-flashed the hard spl and the rom and it all went very smooth i now have an updated rom and all is ok many thanks again speak to you soon cheers BigT.
all sorted
this thread is closed
I hope someone can help
Way back when, I debranded my O2 HD7 using this method : http://forum.xda-developers.com/showthread.php?t=988672&highlight=gold+card
Everything has been fine through the NoDo update until this weekend.
The first problems started when I turned the phone on. 50% of the time it would lock at the HD7 boot screen, and vibrate 4 times.
Then it started crashing a lot so I did a hard reset.
Then it failed to boot at all, crashing after the HTC screen.
Then I tried to reflash it, and got a 266 (flash write) error at around 11%.
Now the phone will ONLY boot into the Bootloader. I can't get it to the format SD card screen and I can't flash it with any image.
Thoughts / advice / sympathy welcome
I have the exact same problem...any help would be greatly appreciated...tried search and followed instructions but still stopping at 11% when trying to flash and only boots into bootloader.
Bootloader shows:
PD29110 SS-BC (4k)
SPL-3.1.2250.0(119314)
MicroP(LED) 0x07
Touch S1(v1.8,#1624
SD SANDISK 15193MB
Partition Info-v211v413
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
Click to expand...
Click to collapse
Kh3ldar said:
Thoughts / advice / sympathy welcome
Click to expand...
Click to collapse
edit. just saw you wrote Error 266, not 262. not sure which Error that is...
what does you Bootloader say?
sporty2k said:
I have the exact same problem...any help would be greatly appreciated...tried search and followed instructions but still stopping at 11% when trying to flash and only boots into bootloader.
Click to expand...
Click to collapse
what are you trying to do?
sh4d0w86.
Hello
I got a HTC HD 7 that when I was updating it to mango freezed in the last step and than I got this HTC boot screen (white splash screen with HTC logo) freezes everytime I turn on the phone ( the phone vibrates 5 times everytime when I turn the phone on)
Help plzzzzzzzzzzzzz
Narseal said:
Hello
I got a HTC HD 7 that when I was updating it to mango freezed in the last step and than I got this HTC boot screen (white splash screen with HTC logo) freezes everytime I turn on the phone ( the phone vibrates 5 times everytime when I turn the phone on)
Help plzzzzzzzzzzzzz
Click to expand...
Click to collapse
so...
you can't get past the HTC Splash Screen?
looks like you'll have to flash a new ROM onto your HD7 to recover.
which HD7 do you have exactly?
with power off, hold volume down, power on.
the PD2xxxx number on the Multi-Color screen? which is it exactly?
pull battery to get out of that screen.
sh4d0w86.
HTC
Its
PD29110 SS-BC (4K)
SPL-4.5.2250.0(129966) MNG
MicroP(LED) 0x07
TOUCH S1(v1.7,#1624)
Narseal said:
Its
PD29110 SS-BC (4K)
SPL-4.5.2250.0(129966) MNG
MicroP(LED) 0x07
TOUCH S1(v1.7,#1624)
Click to expand...
Click to collapse
flash a TMOUS Shipped ROM, link in my signature.
will lose all your data, but should have a working phone afterwards.
make sure battery is at least 50% charged before flashing.
sh4d0w86.
When I tried to install that ROM, the process reached 1% maybe and than an error messege appears number 226, and now I cant turn the phone on, its only back screen, its off, also it doesnt show the red light when I try to charge it...
wow unlucky day for me....
plz help...
Narseal said:
When I tried to install that ROM, the process reached 1% maybe and than an error messege appears number 226, and now I cant turn the phone on, its only back screen, its off, also it doesnt show the red light when I try to charge it...
wow unlucky day for me....
plz help...
Click to expand...
Click to collapse
what did you try to flash?
not my intrinsicROM, i hope...
said to flash a TMOUS Shipped ROM, here.
sh4d0w86.
yes I did that, I flashed the right one
Narseal said:
yes I did that, I flashed the right one
Click to expand...
Click to collapse
which exactly?
can you still get into bootloader?
i suggest TMOUS 3.01.531.02.
sh4d0w86.
I cant get to bootloader, the phone doesnt turn on, its not working
I tried to flash 4.05.531.03
Narseal said:
I cant get to bootloader, the phone doesnt turn on, its not working
I tried to flash 4.05.531.03
Click to expand...
Click to collapse
dang. well, you could try an external charger.
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
Click to expand...
Click to collapse
so, your Bootloader should be fine.
sh4d0w86.
HTC 7 Boot problem
i updated my HTC 2 weeks ago , last night some one call me and my calling screen does not apear, so i wait afew seconds and pulled out the battery after that my phone does not bood and i just see the HTC Logo screen.
Please help me to fix my phone , tnx
also this my Phone info:
PD29100 SS-BC (4K)
SPL-5.0.2250.1(131000) MNG
MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)
wegkommst said:
i updated my HTC 2 weeks ago , last night some one call me and my calling screen does not apear, so i wait afew seconds and pulled out the battery after that my phone does not bood and i just see the HTC Logo screen.
Click to expand...
Click to collapse
you have SPL 5.0, only thing, at the moment, you can try is flashing the Shipped ROM.
link in my signature. Europe 5.00 under Mango w/ ISharing.
Don't you try a hard reset? Or try ruu
Sent from my HD7 T9292 using XDA Windows Phone 7 App
HTC HD7 Windows, HTC screen freeze
Good Afternoon,
I'm new to this forum but not totally new to ROM flashing (very basic previous experience of flashing custom ROM on HTCDesire).
My brother in law broke his phone (smashed screen/digitiser). He has replaced the samaged hardware himself but when he boots the phone it freezes at HTC screen. Have tried to reset but nothing happens. When booting and holding volume down I get the following info:
PD 29100 SS-BC (4k)
SPL-5.11.2250.0(134400) MNG
MicroP(LED) 0x07
TOUCH S1(v1.8, #1624)
SD Sandisk 61MB
Partition Info-v211v413
After reading through a few different searches I have tried to install various releases of the o2 shipped ROM (as it was originally an o2 release) but I get an error message ERROR 226 after 1%. (Noticed that someone already advised they've had error 226 but the response to it relates to Error 262). When running the Schubert ROM/Utility, on the screen where it says which image it is updating to it says "current image" but then nothing, it is blank, no current image mentioned.
It wont matter if Data is lost from the phone as he would rather it working with no data than not working at all. All help is appreciated as is explaining to me in the simplest terms possible.
Thanks in advance to any replies! :good:
I want help I have a HTC diamond2 The picture above shows the problem clearly ,is the solution for this device?., thank you
- trying to hard reset your device, manual hard reset ~ http://www.hardreset.eu/htc_touch_diamond_2_hard_reset_soft_reset_en.html
- if it does not help, the next step flash rom your device ! for guide a look at http://forum.xda-developers.com/showthread.php?t=416211
it doesn't work with me all this solution it stop at 0% or 1%
So first of all I tried to install some rom on my HTC Topaz (it wasn't the first time I change roms) and something gone bad, the installing was stuck on 0% , after the reboot the phone was stuck at launching.
I tried many suggestions that I found here on the forum, but nothing helped, I did the format+reset with MTTY.
Tried to install different roms from the bootloader but it always stuck on the 0% even tried to install them from SD card...
So now I'm in bootloader and it written -
_________________________________________
TOPA100 32M
SPL -1.33.0000
Microp-Topaz (LED) v10
TURBO HW/TURBO SW
--------------------------------------------
NO TP MFG DATA
Serial
Hi All,
Please can you help. My phone decided to reboot today for no reason and now is just sticking on the white screen with the HTC logo.
I've not tried any updates etc I was driving at the time and the phone was in a holder doing nothing :S
I've tried leaving the battery out for a couple of hours and also leaving plugged in but still not booting.
I've pushed the down volume when turned on and can get to the multi colour screen and get the following information:
PD29100 SS-BC (4K)
SPL-5.11.2250.0(134400) MNG
MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)
SD SANDISK 15193MB
Partition Info-v211v413
Does anyone have any ideas, there is nothing on the phone I don't mind losing so if I need to re-flash if someone could tell me which rom and some brief instructions that'll be great.
Thanks
venno
you will probably want to flash your device.
you can try flashing the latest Europe Shipped ROM, but if that doesn't work...
you may want to try and use the Y-Cable method, basically Goldcard method without the Goldcard.
see link(s) in my signature.