Stuck at 0%

Stuck at 0% - Touch HD Windows Mobile ROM Development

Hi guys i need your help i have done the hard spl route but if i try and flash the rom image either from the mem card or off the computer it goes to the flashing screen but stops on 0% and stays there

Can you flash a shipped rom?
If you flash a customized rom you need to go into bootloader first.
Does your device startup?

Hi Laurentius yes i can get into bootloader then the screen clears and the percentage bar is there but it stays at 0% forever.

But when you softreset does your device startup?
vemar said:
Hi Laurentius yes i can get into bootloader then the screen clears and the percentage bar is there but it stays at 0% forever.
Click to expand...
Click to collapse

Yes i can start the phone normally and everything works ok but still the stock rom.

Just a bit more info boot screen says BLAC100 32M
SPL-1.14.000
MICROP-BLACKSTONE (LED) V6

You didn't do HARDSPL right.
Flash HARDSPL one more time and follow the steps described there in thread carefully!
Bootloader should tell you:
BLAC100 32M
SPL-1.14.Olinex
MicroP-Blackstone (LED) v6
vemar said:
Just a bit more info boot screen says BLAC100 32M
SPL-1.14.000
MICROP-BLACKSTONE (LED) V6
Click to expand...
Click to collapse

Thanks for the help will try to re-flash the bootloader again will let you know the out come.

Hi Laurentius26
Many thanks for your help the info was spot on i re-flashed the hard spl and the rom and it all went very smooth i now have an updated rom and all is ok many thanks again speak to you soon cheers BigT.

all sorted
this thread is closed

Related

when i want flash my jade 3g.its stuck at 0%
i have
jade100 64m
spl-2.32.0000
microP-Jde (LED) v5

You need Hard SPL first : http://forum.xda-developers.com/showthread.php?t=514406
Dave

[Q] STUCK on Boot Loader..Need Urgent Help.

I have HD7 (T Mobile)
Boot Loader information...
PD29*** SS-BC (4K)
SPL- 4.5 2250.0 (129966) MNG
MicroP (LED) 0x07
------------------------------------
SD SANDISK 15193MB
Partition Info-v211v413
I am stuck on bootloader now, What can i do

pull the battery. reinsert battery. power on device.
or does it still boot into SPL after doing the above?
sh4d0w86.

I did but it's coming back to the same multicoloured screen again.

Is there any way to go to Nodo update now so i can wait for the official update of Mango or if i can make my SPL4.5 to HSPL then i will be able to install custom rom.,
I dont know what are the options for me now.

I tired to install the orignal ROM, it stuck at 11% and then turn off, Now its not showing any signs of life by any chance. Looks like its bricked

tariqsdk said:
I tired to install the orignal ROM, it stuck at 11% and then turn off, Now its not showing any signs of life by any chance. Looks like its bricked
Click to expand...
Click to collapse
you need to JTAG your device then

thanks, that would be second time...

[q] please help! Is my phone bricked ?

So...I tried installing the Unsigned Hard SPL. Everything worked.when I tried to flash a mtty flash it got stuck at the loading screen...nothing worked so i tried reinstalling the stock ROM. It was stuck at 0%. after a lot of tries I reinstalled the 1.23 SPL on. Now, when I try to flash the official ROM it gives me the invalid vendor ID error...hard-spl flash get's stuck a t0%...and any kind of flash gets stuck at 0%. What can I do? I am really scared...i hope i can repair it somehow. Please help me! I only have access to bootloader.... There on the red part it sais : DIAM100 64M SPL-1.23.0000 MicroP-Diam (LED) v11. On the green one : PS0C-Diam STAGE_PVT v0x32
Thank You

Happen to me too, but i manage to save my phone.
Try to download this ROM from internet and instal it to your phone RUU_Diamond_O2_UK_2.10.206.1_Radio_Signed_Diamond_52.62.25.34_1.13.25.24_Ship.exe
It is original ROM, and it is exe file, just instal that rom and maybe you will have your phone back...

HTC HD 7 boot screen freezes

Hello
I got a HTC HD 7 that when I was updating it to mango freezed in the last step and than I got this HTC boot screen (white splash screen with HTC logo) freezes everytime I turn on the phone ( the phone vibrates 5 times everytime when I turn the phone on)
Help plzzzzzzzzzzzzz

Narseal said:
Hello
I got a HTC HD 7 that when I was updating it to mango freezed in the last step and than I got this HTC boot screen (white splash screen with HTC logo) freezes everytime I turn on the phone ( the phone vibrates 5 times everytime when I turn the phone on)
Help plzzzzzzzzzzzzz
Click to expand...
Click to collapse
so...
you can't get past the HTC Splash Screen?
looks like you'll have to flash a new ROM onto your HD7 to recover.
which HD7 do you have exactly?
with power off, hold volume down, power on.
the PD2xxxx number on the Multi-Color screen? which is it exactly?
pull battery to get out of that screen.
sh4d0w86.

HTC
Its
PD29110 SS-BC (4K)
SPL-4.5.2250.0(129966) MNG
MicroP(LED) 0x07
TOUCH S1(v1.7,#1624)

Narseal said:
Its
PD29110 SS-BC (4K)
SPL-4.5.2250.0(129966) MNG
MicroP(LED) 0x07
TOUCH S1(v1.7,#1624)
Click to expand...
Click to collapse
flash a TMOUS Shipped ROM, link in my signature.
will lose all your data, but should have a working phone afterwards.
make sure battery is at least 50% charged before flashing.
sh4d0w86.

When I tried to install that ROM, the process reached 1% maybe and than an error messege appears number 226, and now I cant turn the phone on, its only back screen, its off, also it doesnt show the red light when I try to charge it...
wow unlucky day for me....
plz help...

Narseal said:
When I tried to install that ROM, the process reached 1% maybe and than an error messege appears number 226, and now I cant turn the phone on, its only back screen, its off, also it doesnt show the red light when I try to charge it...
wow unlucky day for me....
plz help...
Click to expand...
Click to collapse
what did you try to flash?
not my intrinsicROM, i hope...
said to flash a TMOUS Shipped ROM, here.
sh4d0w86.

yes I did that, I flashed the right one

Narseal said:
yes I did that, I flashed the right one
Click to expand...
Click to collapse
which exactly?
can you still get into bootloader?
i suggest TMOUS 3.01.531.02.
sh4d0w86.

I cant get to bootloader, the phone doesnt turn on, its not working
I tried to flash 4.05.531.03

Narseal said:
I cant get to bootloader, the phone doesnt turn on, its not working
I tried to flash 4.05.531.03
Click to expand...
Click to collapse
dang. well, you could try an external charger.
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
Click to expand...
Click to collapse
so, your Bootloader should be fine.
sh4d0w86.

HTC 7 Boot problem
i updated my HTC 2 weeks ago , last night some one call me and my calling screen does not apear, so i wait afew seconds and pulled out the battery after that my phone does not bood and i just see the HTC Logo screen.
Please help me to fix my phone , tnx
also this my Phone info:
PD29100 SS-BC (4K)
SPL-5.0.2250.1(131000) MNG
MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)

wegkommst said:
i updated my HTC 2 weeks ago , last night some one call me and my calling screen does not apear, so i wait afew seconds and pulled out the battery after that my phone does not bood and i just see the HTC Logo screen.
Click to expand...
Click to collapse
you have SPL 5.0, only thing, at the moment, you can try is flashing the Shipped ROM.
link in my signature. Europe 5.00 under Mango w/ ISharing.

Don't you try a hard reset? Or try ruu
Sent from my HD7 T9292 using XDA Windows Phone 7 App

HTC HD7 Windows, HTC screen freeze
Good Afternoon,
I'm new to this forum but not totally new to ROM flashing (very basic previous experience of flashing custom ROM on HTCDesire).
My brother in law broke his phone (smashed screen/digitiser). He has replaced the samaged hardware himself but when he boots the phone it freezes at HTC screen. Have tried to reset but nothing happens. When booting and holding volume down I get the following info:
PD 29100 SS-BC (4k)
SPL-5.11.2250.0(134400) MNG
MicroP(LED) 0x07
TOUCH S1(v1.8, #1624)
SD Sandisk 61MB
Partition Info-v211v413
After reading through a few different searches I have tried to install various releases of the o2 shipped ROM (as it was originally an o2 release) but I get an error message ERROR 226 after 1%. (Noticed that someone already advised they've had error 226 but the response to it relates to Error 262). When running the Schubert ROM/Utility, on the screen where it says which image it is updating to it says "current image" but then nothing, it is blank, no current image mentioned.
It wont matter if Data is lost from the phone as he would rather it working with no data than not working at all. All help is appreciated as is explaining to me in the simplest terms possible.
Thanks in advance to any replies! :good:

[Q] help with htc touch diamond2

I want help I have a HTC diamond2 The picture above shows the problem clearly ,is the solution for this device?., thank you

- trying to hard reset your device, manual hard reset ~ http://www.hardreset.eu/htc_touch_diamond_2_hard_reset_soft_reset_en.html
- if it does not help, the next step flash rom your device ! for guide a look at http://forum.xda-developers.com/showthread.php?t=416211

it doesn't work with me all this solution it stop at 0% or 1%

So first of all I tried to install some rom on my HTC Topaz (it wasn't the first time I change roms) and something gone bad, the installing was stuck on 0% , after the reboot the phone was stuck at launching.
I tried many suggestions that I found here on the forum, but nothing helped, I did the format+reset with MTTY.
Tried to install different roms from the bootloader but it always stuck on the 0% even tried to install them from SD card...
So now I'm in bootloader and it written -
_________________________________________
TOPA100 32M
SPL -1.33.0000
Microp-Topaz (LED) v10
TURBO HW/TURBO SW
--------------------------------------------
NO TP MFG DATA
Serial

Database Develop

welcome

Stuck at 0% - Touch HD Windows Mobile ROM Development

Hi guys i need your help i have done the hard spl route but if i try and flash the rom image either from the mem card or off the computer it goes to the flashing screen but stops on 0% and stays there

Can you flash a shipped rom? If you flash a customized rom you need to go into bootloader first. Does your device startup?

Hi Laurentius yes i can get into bootloader then the screen clears and the percentage bar is there but it stays at 0% forever.

But when you softreset does your device startup? vemar said: Hi Laurentius yes i can get into bootloader then the screen clears and the percentage bar is there but it stays at 0% forever. Click to expand... Click to collapse

Yes i can start the phone normally and everything works ok but still the stock rom.

Just a bit more info boot screen says BLAC100 32M SPL-1.14.000 MICROP-BLACKSTONE (LED) V6

Thanks for the help will try to re-flash the bootloader again will let you know the out come.

Hi Laurentius26 Many thanks for your help the info was spot on i re-flashed the hard spl and the rom and it all went very smooth i now have an updated rom and all is ok many thanks again speak to you soon cheers BigT.

all sorted this thread is closed

Related

stuck at 0%

[Q] STUCK on Boot Loader..Need Urgent Help.

[q] please help! Is my phone bricked ?

HTC HD 7 boot screen freezes

[Q] help with htc touch diamond2

Categories

Resources