is ics rom compatible to salsa if made?
that depends on what its built on...sure there are many around, like my xperia x8 for instance, they not long brought out ics to run on it....very buggy though no wifi etc.
takes a lot of building to make an ics rom, so it will take awile to geet one fully made up bug free
On that note. why aren't there ant CM7 ports?also the sense builds churning out now are all on 2.3.3 while the latest version is2.3.7
Anyway there is a wildfire S/salsa rom in the development forum. the creator just puts some salsa bits into it to get it working on the salsa.cant the same be done for CM7 since the wildfire S already has it?
Blueangel180 said:
On that note. why aren't there ant CM7 ports?also the sense builds churning out now are all on 2.3.3 while the latest version is2.3.7
Anyway there is a wildfire S/salsa rom in the development forum. the creator just puts some salsa bits into it to get it working on the salsa.cant the same be done for CM7 since the wildfire S already has it?
Click to expand...
Click to collapse
er...NO lol, im helping with dev of that sense rom...and its not easy....latest gingerbread is 2.3.5 is the furthest available at minute on the salsa+
., and as for cm7.....it would be nice.....but we lack in other areas before cm7 can be ported.
like im testing kernels out.....each time failed...again from wildfire s
wildfire s roms made for salsa....failed
we are where we are at the minute.....please dont ask for something we haven't even got a dev for!
Q:latest stable ROM
I have rooted using [TUTORIAL] Unlock Bootloader (India)+Root+Increase Internal Storage.
What is the ROM installed during the above process?
Is the latest? If not which is the latest stable ROM?
currently working roms are Iconic and Iconic S
BigBearEvo said:
currently working roms are Iconic and Iconic S
Click to expand...
Click to collapse
Isn't .sense working anymore
Sent from my HTC Wildfire S using xda premium
Q:latest stable ROM
Thank u bigbear and Benjamin
What is the Rom during my initial rooting.
And is there any advantages using the said Roms
(Based on ur Exp and usage)
---------- Post added at 10:38 PM ---------- Previous post was at 09:58 PM ----------
Thank u bigbear and Benjamin.
What is the Rom during my initial rooting.
Is there any advantage using the said Rom based on your experiance and usage
meswar said:
Thank u bigbear and Benjamin
What is the Rom during my initial rooting.
And is there any advantages using the said Roms
(Based on ur Exp and usage)
---------- Post added at 10:38 PM ---------- Previous post was at 09:58 PM ----------
Thank u bigbear and Benjamin.
What is the Rom during my initial rooting.
Is there any advantage using the said Rom based on your experiance and usage
Click to expand...
Click to collapse
Well, with my ROM you get loads of nice options in the installer for a start
Related
This rom was posted on 4pda.ru
Original Post is here : http://4pda.ru/forum/index.php?showtopic=289763&st=1560#entry11868427
Based on Sensation XL 2.12.0.0 CL282666 release-keys
Screenshots in the original post
What works in this release :
Touch Screen
Calls
Bluetooth
Powersaver
Mobile Internet & some functions
Not working :
Camera
USB
Wifi
Beats audio
Better sound
And many more things
Additions :
Buttons fix : http://narod.ru/disk/43161893001.723a875923e97a2d2e7b10cc864a8c64/updater_script.zip.html
Super Rosie : http://narod.ru/disk/43178690001.c6...7ab7de/SuperSmoothRosie_SXL_2.12.0.0.zip.html
Ultra Rosie :http://narod.ru/disk/43179091001.96...31/UltraSmoothRosie_SXL_2.12.0.0 (1).zip.html
This is the release purely made by Ruslik0579 ..i just shared it with all .. Im working on my own release
Thanks Nik. Will give it a try.
Thank you Ruslik ROM from 4pda
If I'm not mistaken, Jeedi and ruslik didn't allow you to replay their ROM.
thanks man
where i can find the download from the link
sorry if my english's bad
awesome Nik
NikkyNine said:
If I'm not mistaken, Jeedi and ruslik didn't allow you to replay their ROM.
Click to expand...
Click to collapse
bad things never happen to bad people
**** HAPPENS
For the download link. Go to the top go to the first page as it send you to page 70 something, then click on where it says android sdk. Then it sends you to an external website to download.
This this any different to ice cold? My phone hasn't translated the site so I can only go off images.
Sent from my Incredible S using xda premium
Tested, it is fast and smooth. However cannot signed in to Google. Data connection is enabled, but still can't access internet. Weather location is not detected as well.
Cheers
---------- Post added at 12:31 PM ---------- Previous post was at 12:23 PM ----------
Any ported Rossie from this ROM? I meant the flat taskbar with five application?
NikkyNine said:
If I'm not mistaken, Jeedi and ruslik didn't allow you to replay their ROM.
Click to expand...
Click to collapse
Im waiting for a pm from ruslik.. i guess he already removed the rom thread from 4pda.ru .. if he says i will remove the post .. i had sent him a pm about helping me in fixing the mobile internet and he sent me that link.. i thought it was released for the russian users so i released it here for all the users with proper credits .. Anyways i thought there are no such problems of differentiation in the incredible s section atleast .. and if its said my rom will be a copy of his rom and stuff the video of my rom was released time back and i even mentioned what was fixed and what wasn't !!
No one has removed ROM from 4pda. Yesterday ruslik was even banned there for a couple of days because of swearing. I don't know why he thougt you'd "stolen" his ROM when there were all the proper credits... But he behaved like some sick or drunk man.
Just don't care and keep going making awesome ROM's
@temper89 ohh thats the case he's not replying to my msgs or anything .. i never have copied his rom whatever my rom progress is i always post it in this thread : http://forum.xda-developers.com/showthread.php?t=1496644
this was posted on 7th march : http://forum.xda-developers.com/showpost.php?p=23357200&postcount=64
i hope this clears misconceptions !
In my opinion nik is trying to release to many roms, without most em being final yet. And I have noticed his roms are losing there performance and stability
Sent from my HTC Incredible S using xda premium
@souljasteve84 i didnt release any roms bro ..The one rom i released is TriNity Sensation Xl based on sense 3.5 & gingerbread .. in terms of performance and stability this one's got good reviews
and second was Dream Edition which was just a preview .. so that people could know how ics + sense 3.5 is thats all .. Whereas " Alpha " term states for something ..
No other roms released
Fair call lol don't get me wrong tho nik I do love ur roms and I can't wait for HTC to release drivers n etc so u can cook up a fully functional ics rom ur trinity rom is amazing dude
Sent from my HTC Incredible S using xda premium
@souljasteve84 No issues bro i was just trying to reply to ur comment .. im happy u like my roms
Why cant Devs port HTC ONE V Vanilla Rom? Same specs...
hey guys i would like to know why there has been no talk of porting a one v rom as there are so many similarities eg.
Screen Size, Ram, Camera, GPU, CPU, etc
i was thinking it would be best to port a vanilla ROM as sense would have increasing problems but also a stripped down version would allow the Rom to adapt to our small internal.
here are some roms which could be ported:
http://forum.xda-developers.com/showthread.php?t=1640652
http://forum.xda-developers.com/forumdisplay.php?f=1554
any feedback is appreciated
thanks
Maybe because it's sense 4.0 LITE so they don't want to port it.
---------- Post added at 12:49 PM ---------- Previous post was at 12:45 PM ----------
reider123 said:
Maybe because it's sense 4.0 LITE so they don't want to port it.
Click to expand...
Click to collapse
Oops. I'm sorry
there's already One V ROM to nexus one.
reider123 said:
Maybe because it's sense 4.0 LITE so they don't want to port it.
---------- Post added at 12:49 PM ---------- Previous post was at 12:45 PM ----------
Oops. I'm sorry
there's already One V ROM to nexus one.
Click to expand...
Click to collapse
oh which one?
kuljit55 said:
oh which one?
Click to expand...
Click to collapse
go to nexus one developing section.
there's sense 4.0 ROM.
It's much faster than sense 3.5
Nothing similar.
The CPU is the same as Desire HD/S/MyTouch 4G, being 1GHz it's still a different architecture and considerably faster than N1's.
The GPU blows the N1's away by a factor of 4. Nowhere near similar.
The storage is eMMC and not NAND, which means - different boot.
The camera is way different.
And even with One V's almost complete similarity to the older family above, without a proper HTC kernel the above mentioned devices don't have completely functional port, just like N1 doesn't have.
The kernel its okay ... but notb and ROM .. Searching a guy who understand about Porting ROMS !
For more info : Here
Searching and Tester's ..
Can wait!
Please if there's somebody who know how to port roms,please port it for our x8! Kernel is DONE,so not bootloops!
what about finishing old racht's HTC salsa sense? I don't know about porting roms :/
when you upload the kernel, attempt to port the rom
Tato227 said:
when you upload the kernel, attempt to port the rom
Click to expand...
Click to collapse
Thank you very much man!!!
Kernel will be release,uploaded: at 21:00 PM today !
Thank youuuu!
---------- Post added at 05:03 PM ---------- Previous post was at 05:02 PM ----------
darkfrmr said:
what about finishing old racht's HTC salsa sense? I don't know about porting roms :/
Click to expand...
Click to collapse
It's old version of sense Q!
2010matej said:
It's old version of sense Q!
Click to expand...
Click to collapse
At least it fits on x8's tiny memory. I remember racht having problems with even older sense ports because of that.
However, I don't know much about sense roms, I might be wrong
darkfrmr said:
At least it fits on x8's tiny memory. I remember racht having problems with even older sense ports because of that.
However, I don't know much about sense roms, I might be wrong
Click to expand...
Click to collapse
That can be good .. but i cant restore it - MD5 Mistake
are you trying to restore it in CWM? that's not possible cause those were designed for xRecovery AFAIK. and if you base it on racht's ROM i think i'll need to compile new modules.
darkfrmr said:
At least it fits on x8's tiny memory. I remember racht having problems with even older sense ports because of that.
However, I don't know much about sense roms, I might be wrong
Click to expand...
Click to collapse
He works on stock kernel!
The Tester searching Continue ! !
I found my Issue - Working allone from now on .. but need tester
Problem sloved -
Today - HTKernel * 21:00 PM
Tomorrow - HTSense (the Sense ROM) * Unkown hour or minute !
danibosev said:
The Tester searching Continue ! !
I found my Issue - Working allone from now on .. but need tester
Problem sloved -
Today - HTKernel * 21:00 PM
Tomorrow - HTSense (the Sense ROM) * Unkown hour or minute !
Click to expand...
Click to collapse
I can be tester!
Me too.
I would be happy to help
me too dani
i can test toooo!!!!!
fotak-x said:
i can test toooo!!!!!
Click to expand...
Click to collapse
Ok!
Kernel release at : 21:00 PM today
ROM release - Unkown
I wanna test too.
Sent from my X8 using xda premium
DeFcOn said:
I wanna test too.
Sent from my X8 using xda premium
Click to expand...
Click to collapse
OK! But please be patient! We don't know when rom will be released. Maybe tommorow,in 3 days or week,bugs must be fixed! I think beta versions will not be released!
and please lemme know if WiFi, bluetooth, touchscreen etc. work using the kernel via PM. 'cause if i don't know what the problems are, i won't be able to fix any bugs (if i ever release updates, which is almost unlikely)?
Remics-jb v5 vs vc-rom mix v22
yossi3698741 said:
Remics-jb v5 vs vc-rom mix v22
Click to expand...
Click to collapse
sorry to say, but ur question seems to sounds like ur doubting our DEVs ability here.
As far as i know, every devs here struggle their best to make something awesome for U guys eventhou they sacrifies their own RL time to create something better for u. So why comparing thems?
As for me, every single custom ROM out there are magnificient, incredible and all DEV are should get their credits for their works and i never n ever will comparing their works as i think if i even try to compare, it will be rude for me n for them
Comparing doesnt even makes sense for me as all human are equal.
sorry if my reply sounds rude to u and hav a nice day.
Sent from my GT-I9000 using xda premium
yossi3698741 said:
Remics-jb v5 vs vc-rom mix v22
Click to expand...
Click to collapse
when i started to flash i used to ask that too.
but now, with a running titanium backup, it really isn't that complicated to switch between many different roms.
my favourites have been remics, helly and mackay
mmmmmmmm....which rom is perfect....???? the answer of these question is ,,It depends in every one Opinion ,,...
and my opinion is..... i tried a lot of roms but i love cm 10.1 which based in RC4 its so smooth .. and stable and i have no problem with it till now....
i really love it ....:good::good::good::good:
---------- Post added at 02:04 PM ---------- Previous post was at 01:53 PM ----------
sorry ..... I thought its a general question ????
Hey Guys,
I have P990 and I'm using CM10 nightly, and I really want to change ROM as this works really bad on my device.
I downloaded DjangoManouche X 1.6.1 and whenever I go to install, it goes through the first steps, then screen gets black and goes back to Clockwork Recovery. I tried with other ROMs and similar things happen.
What could it be?
Thanks|
Did you make ful wipe?
Factory reset,wipe cache partiton,wipe data,wipe cache,wipe system and wipe dlvik.
Sent from my LG-P880 using xda app-developers app
xperia u20i said:
Did you make ful wipe?
Factory reset,wipe cache partiton,wipe data,wipe cache,wipe system and wipe dlvik.
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your response.
Yes, I've wiped everything, I tried formatting everything, I did a factory reset, all of that
I don't know...maybe you could try reflash recovery...
And do you pay attention on wich bootloader version of rom you installing...
Sorry for bad english
Sent from my LG-P880 using xda app-developers app
---------- Post added at 07:40 PM ---------- Previous post was at 07:38 PM ----------
And if you installing from external sd card,maybe that could be problem...try from internal...maybe is sd card broken
Sent from my LG-P880 using xda app-developers app
xperia u20i said:
I don't know...maybe you could try reflash recovery...
And do you pay attention on wich bootloader version of rom you installing...
Sorry for bad english
Sent from my LG-P880 using xda app-developers app
---------- Post added at 07:40 PM ---------- Previous post was at 07:38 PM ----------
And if you installing from external sd card,maybe that could be problem...try from internal...maybe is sd card broken
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Sorry for my ignorance,
how can I do that?
Oh also, I can install other CM ROMs, those are the only ROMs I can install...not other one!
With all in one tool i think there must be option,...i'm not expert so you better check this before try'n...but first try install rom from internal card if you didn't...
Sent from my LG-P880 using xda app-developers app
xperia u20i said:
With all in one tool i think there must be option,...i'm not expert so you better check this before try'n...but first try install rom from internal card if you didn't...
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Ok, so a few things I haven't mentioned before, whenever I connect my phone VIA usb to my computer, nothing happens. I don't have the possibility to flash anything VIA USB, so what can I do?
Do you install all drivers?look in all in one tool section...there is everything...
Sent from my LG-P880 using xda app-developers app
if you're on an official cm nightly then you're on a old bootloader... django is on the new bootloader...
search dev thread for aio tools and how to switch to a new bootloader
edit:
or install one of cm based old bl roms outthere (there is also an old/new bootloader converter tool somewhere in dev thread as well but i don't know if it works for converting all roms - it worked for me on tonyp "the rom" roms up to build 26)
60nine said:
if you're on an official cm nightly then you're on a old bootloader... django is on the new bootloader...
search dev thread for aio tools and how to switch to a new bootloader
edit:
or install one of cm based old bl roms outthere (there is also an old/new bootloader converter tool somewhere in dev thread as well but i don't know if it works for converting all roms - it worked for me on tonyp "the rom" roms up to build 26)
Click to expand...
Click to collapse
I just installed CM7 stable, so what should I do now?
And how you did this?where was the problem?
Sent from my LG-P880 using xda app-developers app
why cm7?
---------- Post added at 09:02 PM ---------- Previous post was at 09:00 PM ----------
xperia u20i said:
And how you did this?where was the problem?
Click to expand...
Click to collapse
i explained his problem, but i still don't know why he installed a prehistoric cm7 instead one of the newer cm10.2 based roms
I wonder to...maybe is gb lower... who know's
Sent from my LG-P880 using xda app-developers app
xperia u20i said:
I wonder to...maybe is gb lower... who know's
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Well, just because it's the only ROM I can install. Still want to upgrade, but I can't do anything. USB isn't working, ROM from external SD don't install...
don't get me wrong, cm7 is a good rom (especially if you installed Temasek one + vadonka kernel) - battery is great with this combo (i was using that combo for almost a year until cm10/10.1/10.2 versions of tonyp roms + pengus kernels came out in the beginning of 2013)...
but cm10.2 has some usefull stuff and many improvements over cm7...
i can only suggest you to read some more threads in the developer section... moving to a new bootloader can give you some more benefits if you're into the newest roms (since the rom developers usually support only the new bootloader first, and then they make an old bootloader versions of their roms/kernels as well - or they don't - it's up to them and their free time)
i'm also considering to finally switch to a new bootloader - but i'm still waiting for the new cm11 (kitkat) roms and 3.1+ kernel to become stable enough for a daily use...
it's up to you to see what you need most out of the rom... but some reading before flashing is mandatory... if you've read some more - you'd already know your problem before i wrote my post and explaining the old/new bl issue...
once a week someone comes up with the same problem because he doesn't read about bootloaders or is just lazy to read the 1st posts in the rom threads...
i hope i helped... cheers
occured kenblis
60nine said:
don't get me wrong, cm7 is a good rom (especially if you installed Temasek one + vadonka kernel) - battery is great with this combo (i was using that combo for almost a year until cm10/10.1/10.2 versions of tonyp roms + pengus kernels came out in the beginning of 2013)...
but cm10.2 has some usefull stuff and many improvements over cm7...
i can only suggest you to read some more threads in the developer section... moving to a new bootloader can give you some more benefits if you're into the newest roms (since the rom developers usually support only the new bootloader first, and then they make an old bootloader versions of their roms/kernels as well - or they don't - it's up to them and their free time)
i'm also considering to finally switch to a new bootloader - but i'm still waiting for the new cm11 (kitkat) roms and 3.1+ kernel to become stable enough for a daily use...
it's up to you to see what you need most out of the rom... but some reading before flashing is mandatory... if you've read some more - you'd already know your problem before i wrote my post and explaining the old/new bl issue...
once a week someone comes up with the same problem because he doesn't read about bootloaders or is just lazy to read the 1st posts in the rom threads...
i hope i helped... cheers
Click to expand...
Click to collapse
How is Cm10.2 working for you? Battery life/speed/etc
I had 10.1 I believe and it was horrible.
I can' install new bootloaders, etc...as I can't enter debug mode, nor do anything
just to make sure...
your usb doesn't work when the phone is fully booted into the rom or it doesn't work for SW upgrade?
did you try other usb ports? (don't use usb hubs for this, especially for SW upgrade stuff)
did you install the correct windows drivers for the phone?
---------- Post added at 09:27 PM ---------- Previous post was at 09:23 PM ----------
tom9191 said:
I had 10.1 I believe and it was horrible.
Click to expand...
Click to collapse
it was horrible if you used the official CM10.1 nightlies... not if you've been using tonyp cm10.1 based roms and pengus kernels... believe me...
currently i'm on the tonyp "The rom" build 26 + pengus kk126 kernel (no ram hack version)
battery lasts for almost 2 days with moderate use (around 3 hrs screen on + wi-fi on, some calls, some messages)
phone is snappy, i don't have syncs turned on in any app...
phone is oc-ed to 1500mhz (min 216, max 1500mhz), and if you care about the benchmarks - it gives a solid 9000+ in antutu...
for a 3 year old phone - i'm satisfied enough...
btw what version of cwm do you have?
your starting point can be here
http://forum.xda-developers.com/showthread.php?t=2020737
and please at least read the 1st page of the thread if not all of it (for user comments)
there is also an option to install the correct windows drivers and a tutorial for windows 8 (i'm on win7 x64)
I've tried different ports, different cables, different copmuters...I've read that a lot of people have this issue though, especially after upgrading to CM7...which was my case. Ever since I haven't been able to do it
60nine said:
just to make sure...
your usb doesn't work when the phone is fully booted into the rom or it doesn't work for SW upgrade?
did you try other usb ports? (don't use usb hubs for this, especially for SW upgrade stuff)
did you install the correct windows drivers for the phone?
---------- Post added at 09:27 PM ---------- Previous post was at 09:23 PM ----------
it was horrible if you used the official CM10.1 nightlies... not if you've been using tonyp cm10.1 based roms and pengus kernels... believe me...
currently i'm on the tonyp "The rom" build 26 + pengus kk126 kernel (no ram hack version)
battery lasts for almost 2 days with moderate use (around 3 hrs screen on + wi-fi on, some calls, some messages)
phone is snappy, i don't have syncs turned on in any app...
phone is oc-ed to 1500mhz (min 216, max 1500mhz), and if you care about the benchmarks - it gives a solid 9000+ in antutu...
for a 3 year old phone - i'm satisfied enough...
btw what version of cwm do you have?
your starting point can be here
http://forum.xda-developers.com/showthread.php?t=2020737
and please at least read the 1st page of the thread if not all of it (for user comments)
there is also an option to install the correct windows drivers and a tutorial for windows 8 (i'm on win7 x64)
Click to expand...
Click to collapse
tom9191 said:
I've tried different ports, different cables, different copmuters...I've read that a lot of people have this issue though, especially after upgrading to CM7...which was my case. Ever since I haven't been able to do it
Click to expand...
Click to collapse
omg...this is a puzzle (at least for me ,maybe some on can solve this in a snap,but it really seems complicated)
first, we need to resolved why smart flash won't recognize your device...than everything should go with no problems
---------- Post added at 11:19 PM ---------- Previous post was at 11:06 PM ----------
what color is INSTALL APX in aio toolkit...is it gray or is white like every thing else, when you connect phone?
if you have installed all drivers(lg united,nvflash drivers,apx,adb usb drivers...that is in tonyp basketbuild downloads in p990 staff-->various ) and if you are not did this: SU660 Users: Download Both P990 & SU660-AddOn packages. Run & extract the P990 first and then extract in the same folder the SU660-AddOn. AIO-Toolkit will be converted to support SU660 device
by mistake i really dont know where is problem...