Database Develop

Kindly Help

Dear all, i have a serious problem i applied a theme by inserting apk files into the system/firmware and then my phone boots and when trying to enter the home screen it doesn't and keep vibrating, i tried to recover but i enter into the recovery mode of rom manager and don't make a factory reset, so please what can i do

First read this thread
(You have 30 odd posts so you should know better)
You can try to flash a new theme through recovery. That should fix it.

samouri said:
Dear all, i have a serious problem i applied a theme by inserting apk files into the system/firmware and then my phone boots and when trying to enter the home screen it doesn't and keep vibrating, i tried to recover but i enter into the recovery mode of rom manager and don't make a factory reset, so please what can i do
Click to expand...
Click to collapse
You will have to flash older firmware via Odin. Check out these links and you should be able to get all the information you need.
http://forum.xda-developers.com/showthread.php?t=723596
http://www.youtube.com/watch?v=PpWcM44On88
Firmware:
http://forum.xda-developers.com/showthread.php?t=865701

This thread should not be here in the first place
To bring your phone back...download a stock rom from samfirmware.com and flash in Odin..
Download and flash (Odin) CFRoot Kernel with Busy box...and from there you can flash any custom rom and theme you want via ClockMod...

[Q] Galaxy Ace stuck in reboot loop

My Galaxy Ace is stuck in a reboot loop after trying to flash 2.3.6 onto it, when it had 2.3.5 on it previously.
I've used ODIN and no matter what firmware I try to flash onto it, it just goes into a reboot loop.
Any idea how to fix it?

Did you try to do a wipe?

vkanamekuran said:
Did you try to do a wipe?
Click to expand...
Click to collapse
A wipe worked! Thanks!

how to do a wipe please tell

mor1228 said:
how to do a wipe please tell
Click to expand...
Click to collapse
press down home button and then power on phone ...--> you will enter into recovery mode .
select wipe with help of volume keys and there you go out of bootloop

My Galaxy Ace is also in some sorta reboot loop.
Everything was working fine with it (phone is rooted and CWM installed) until I did a phone reset because I was giving the phone to my gf. After doing this the phone reboots, the blue samsung logo plays (without sound) and then repeats ad-infinitum. I can get into recovery mode and download mode ok and I've tried wipe and even restored a CWM backup (it says it was successful) but the phone just keeps rebooting. I can see the phone in odin but I've never tried to flash anything onto it and quite frankly I'm unsure whether it would just make things worse (if it needs to go back to Samsung for repair). Any help would be appreciated...

If you have cwm ..why dont you download some custom rom like cm7and flash it ..that would bring your phone back to life ...then you can downgrade to stock rom if you want ...and btw in cwm try cache partition , clear data /factory reset and clear dalvik cache ..see if it boots after you do this ..
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script

when i always flash by odin or by cwm i always do wipe , wipe cache and wipe dalvik, this helps me everytime

I managed to flash a firmware from samfirmware and it fixed the reboot.
Now my issue is when I connect to Kies, it says there's an updated firmware for the phone but it fails every attempt to install it. I went back to samfirmware and found this firmware: S5830ZSKPD ## but when I download and extract it there's only 1 x MD5 file and 1 x DLL file?! The other firmware had the 4 or 5 files needed to include in Odin... any ideas guys?

I think its a "one package file " ..I forgot the correct name but there is some option like that in odin ..dont worry it contains all the required files ..and if you are scared to do it then go to you tube ..there are many tutorials showing it then...
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script

rogers4759 said:
I think its a "one package file " ..I forgot the correct name but there is some option like that in odin ..dont worry it contains all the required files ..and if you are scared to do it then go to you tube ..there are many tutorials showing it then...
Click to expand...
Click to collapse
Yep, that's exactly what it was, thanks again.
Unfortunately with this firmware, Kies doesn't recognise it and provides no info.
I flashed back to the older firmware... I'll just have to keep experimenting I guess.

for flashing with odin --> http://forum.xda-developers.com/showthread.php?t=1225493
many people says, don't upgrade the firmware with KIES.

dianpadi said:
for flashing with odin --> http://forum.xda-developers.com/showthread.php?t=1225493
many people says, don't upgrade the firmware with KIES.
Click to expand...
Click to collapse
Well I could flash it with Odin if I had the firmware but I don't.
It appears it's not available on SamFirmware.com
Do you know where I can download the following firmware?
PDA:KPD / PHONE:KPD / CSC:KPC (THL)
Thanks

Lol I cant understand those firmwares ..can you tell me which version of android you want like 2.3.4/2.3.5/2.3.6 ...then ill be able to help you wanr
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script

Thanks anyway but I managed to find the firmware online and flashed it using Odin.
Now Kies says I'm using the latest which is a good start : )
Now I just need to find a way to root my SGS2 GT-I9100T

U can try a custom ROM from the Developer's forums here.
I also once stucked in the Reboot Loop..............
But then I installed a custom or if you want features from a official Rom, you can install Stock Based custom ROm from the Developer forums of Galaxy Ace. Really good Rom have been made by the developers

In the chance that someone else is looking for this latest OEM firmware update:
PDA:KPD / PHONE:KPD / CSC:KPC (THL)
It can be downloaded from: http://translate.googleusercontent....flgljh&usg=ALkJrhiMpHV83dugh4RGwhKpyjIrYIgn2Q
It is in "one part file" format and can be flashed using Odin.

whatever may be the problem ......just rem to keep a backup of ur previously used rom and just flash it with cwm...

Progress?
Sent from my GT-S5830 using xda premium

Read all the previous no way out loop boot
Hi every body
i have installed cwm, custum firmware, every thing goes ok
tryed to use simlock remover, no message, turned off the Galaxy Ace but after rebooting, a continuous loop boot, no acces to recovery, flashing on wath ever firmware version with odin success but on rebooting the loop is back, help please.
PS : while flasing with odin : "big partition size!!"

[Q] How To Full Flash Back To Factory Stock Firmware

What Can Something to Help Me? Firmware S3 Mini Me I8190DXALL3 / I8190OLBALL4.Saya Got Problems With Mini S3 / GT-I8150. A Time I Make Mistakes Flash Rom. So the problem appears
1. Baseband Version
AP: I8190DXALL3
CP: XXXX << ==== How Do I Get It Back???
CSC: I8190OLBALL4
2. EFS Formatted
3. Can not Lock Screen (Pattern, PIN, etc.).
4. Wizard Mode Not Appear (The First Time Wizard Appears To Perform Settinga Language, Date and Time, Sing In Account, Etc.)
5. Information Factory Test Appears On Screen (Like That I Attach Images)
How To Solve Such Problems??? Or How to Full Flash Back To Factory Stock Firmware???
I Have Tried Doing Flash Stock Firmware (I8190DXALL3_I8190OLBALL4_HOME.TAR.md5) Via Odin On PDA Or File Using Goldenxx.PIT and Doing Tick Repartition But It's Not Succeed.
Sorry If I'm Not Good English. :angel:

faisalxp said:
What Can Something to Help Me? Firmware S3 Mini Me I8190DXALL3 / I8190OLBALL4.Saya Got Problems With Mini S3 / GT-I8150. A Time I Make Mistakes Flash Rom. So the problem appears
1. Baseband Version
AP: I8190DXALL3
CP: XXXX << ==== How Do I Get It Back???
CSC: I8190OLBALL4
2. EFS Formatted
3. Can not Lock Screen (Pattern, PIN, etc.).
4. Wizard Mode Not Appear (The First Time Wizard Appears To Perform Settinga Language, Date and Time, Sing In Account, Etc.)
5. Information Factory Test Appears On Screen (Like That I Attach Images)
How To Solve Such Problems??? Or How to Full Flash Back To Factory Stock Firmware???
I Have Tried Doing Flash Stock Firmware (I8190DXALL3_I8190OLBALL4_HOME.TAR.md5) Via Odin On PDA Or File Using Goldenxx.PIT and Doing Tick Repartition But It's Not Succeed.
Sorry If I'm Not Good English. :angel:
Click to expand...
Click to collapse
You flash wrong firmware?
Is your phone I8190 or what?
How you tried repartition? What file it was? Errors?
After stock firmware you have to make hard reset(factory reset) that wipe all older files from phone. So back up is needeed if wanna save.
I can give you that WIPE files if wanna. Use with ODIN(pda)

I've had this problem, I solved it by formatting /modem via CWM and flashing modem.bin via Odin in PDA.
But I still have this CP: XXXX issue.

Benzonat0r said:
I've had this problem, I solved it by formatting /modem via CWM and flashing modem.bin via Odin in PDA.
But I still have this CP: XXXX issue.
Click to expand...
Click to collapse
Why you flash just modem.bin? Was it for you country??! It is region -code dependies(country and what telephone network phone can use....) So your problem XXXX means, there is not any....
Did you hard reset after flashing?

Because I flashed a bootloader in there accidentally it was a typo really. So no matter what I did modem didn't work, so I had no choice but to format /modem and flash everything all over again. I think I deleted a file needed to recognize my Baseband version, the phone works normally it just doesn't show any Baseband version.

How To Full Flash Back To Factory Stock Firmware
S3miniFin said:
You flash wrong firmware?
Is your phone I8190 or what?
How you tried repartition? What file it was? Errors?
After stock firmware you have to make hard reset(factory reset) that wipe all older files from phone. So back up is needeed if wanna save.
I can give you that WIPE files if wanna. Use with ODIN(pda)
Click to expand...
Click to collapse
Yes My Phon Is GT-I8190......
Yes I'm Try Repartition But Not Fix The Problem, No Error In Flasing Firmware
I'm Trying Firmware I8190DXALL3_I8190OLBALL4_HOME.TAR.md5 From Indonesia, Because I'm Live In Indonesia
I'm Try All, WIPE.tar.md5 or PARM.tar.md5 (From http://forum.xda-developers.com/showthread.php?t=2030282) Using To Odin and I Try Reset To factory Reset But ALL Not Working.
Note :
Initially I Tried Doing Root And Succeed, Then I Tried Installing CWM Bootloop But, I Already Tried Reset To Factory (Wipe from CWM) But Not Succeed .. After I Serch at XDA Forums I Get File Recovery.tar.md5 (But Different Region) From A Forum GT-I8190. I Tried Odin Flash Via The result Bootloop PDA And Missing, But CP: XXXX Already Being So .... truz I Try Search And Finding Ways To Fix EFP Tools Professional (I Read forum Fixing Problems That Make CP: XXXX Ways restor ) But When I Try Not Succeed And Me One Click on the Format button EFS EFS Before Doing restor .... eventually all Issues My Name Appears In First Post. Furthermore, I Try Download Stock Firmware For Indonesia Namely I8190DXALL3_I8190OLBALL4_HOME.TAR.md5 and I try to Find File goldenxx.PIT, I Try Flash Using ODIN Repartition Checking Using Goldenxx.PIT And using file .. After the Finish Installing Flash Appear Loading Firmware, TPI Tiba2 stop on the way and Tiba2 Sign in to CWM, Emergent statements Missing More Like This "Installing File MD5 Not Suitable, if you'll Continue Installation? Me Try Select" Yes "But After That Go To CWM" I truz My Try Choose Reboot But Can not, Even Log Into CWM Continues (Though I'm not Pressing Power + Menu + UP voume. Boot). Initially One How Can I Boot with Normal (Not Automatically Sign Into CWM) That Make Flash With Recovery.Tar.Md5 Which I Mention Above.

Benzonat0r said:
I've had this problem, I solved it by formatting /modem via CWM and flashing modem.bin via Odin in PDA.
But I still have this CP: XXXX issue.
Click to expand...
Click to collapse
Thank Benz For Information, I Will Try ... Previous I'm Just Trying To mark Repartition And Flash Modem.BIN Of Odin But I Do Not Attempt preemptively Format Via CWM. I'll try it soon. Thank you

S3miniFin said:
Why you flash just modem.bin? Was it for you country??! It is region -code dependies(country and what telephone network phone can use....) So your problem XXXX means, there is not any....
Did you hard reset after flashing?
Click to expand...
Click to collapse
No problem I'm Not Only That, I'm also not intentionally Formatting EFS EFS Of Professional Tools, So Emerging Display In Which I Attach Pictures And Now I Can not Lock Screen (Pattern, PIN, Face Unlock, Etc).
I also Already Tried Flash Firmware I8190DXALL3_I8190OLBALL4_HOME.TAR.md5 (My Region) In PDA And Using File goldenxx.PIT and Ticking Repartition .... But Not Succeed Such Problems Still Appear While I Already Do WIPE Data and Cache (Factory Reset).
What There Ways To Hard Reset addition That I mentioned above??? Please explanation Because I Still A Beginner

Bricked or not?

Hi everybody
Im new here and to flahing new Roms and stuff.
i believe my phone is bricked and im struggling to get it opperational. Here is what happened...
I have a GT-N7000 on 4. 1. 2 Jelly Bean, which i rooted and flashed to custom ROM CynoganenMod 12 on 5. 0 Lollipop. All was going fine, i rooted my phone, installation went accordingly. After a week or so whithout any problems, my phone started to freez, slag and hang which it never did before, so i decided to flash it back on 4. 1. 2 Jelly Bean I did all as is step by step on Odin 3.-v1.8. When my booted, it booted into System Recovery...
reboot system now (I did)
apply update from ADB
apply update from external storage (I did)
wipe data/factory reset
wipe cache partion
apply update from cache
-----------------------------------------------
# MANUAL MODE #
-- Applying Multi-CSC. . .
E : All failed to mount and open in red ( Invalid argument )
Nothing seems to work, so when i pull out the battery but it back and press "Volume down, Menu and Power button it takes me to the screen with the Warning and yellow triangle where i can install a custom ROM...
Volume up : Continue
Volume down : Cancel ( restart ) (I did)
When i Volume up it takes me to...
ODIN MODE
CUSTOM BINARY DOWNLOAD : NO
CURRANT BINARY : SAMSUNG OFFICIAL
My problem is i have no clue what my PDA nor my CSC code is. Im from South Africa and not sure either which of these are correct.... XFV, XFC, XFM, XFA (im not network locked) so i dont know which firmware to flash with Odin to make my phone opperational again? Any help please guys.
Johan

Download Philz kernel in tar.md5 format and flash using Odin... Then try to boot into recovery. You should see cwm. Factory reset and flash a stock rom again.

nokiamodeln91 said:
Download Philz kernel in tar.md5 format and flash using Odin... Then try to boot into recovery. You should see cwm. Factory reset and flash a stock rom again.
Click to expand...
Click to collapse
I have tried Phillz and did as you suggested. Im confident that i dont have the correct firmware. I downloaded this from Sammobile : N7000XXLSZ_N7000OJVLSB_N7000LSO_HOME.tar.md5.
Not sure how to go about this....

Doesn't matter what firmware you had.. Once you do a factory reset you can flash any rom made for the n7000
Were you able to get into Philz cwm recovery after you flashed the kernel?

Hi there.
I am happy to report that my phone is back to its original state. Phew, that wat too close for comfort.
I figured that it was obivously bricked or something close to it.
The problem was that i repartitioned it with the wrong PIT file and wrong kernel. Why i did that, i dont know? So i found firmware i thought would be the correct one! In its bricked state i copied the file superuser to my external, so can unzipit in CWM recovery. I download a file flashprogram Samsung N7000 +Pit. I then unzipped it and found the .Pit file which i flashed onOdin3 v1.85 at the same time with the firmware, have it repartitioned, and install the firmware.
It passed with success. Go Green!!! )
It booted to Philz recovery and installed the zip file superuser, took your advice then rebooted.
My phone switched on but a page came up where i had to give a password decrypting the device storage. Freaked out repeated the same prosesswith Odin and it started up normaly and suprised to see it restored to its original state* *smile*
*Just be carefull not to go flash the wrong stuff on your phone if your not sure what you are doing ( like i did! )*
I took your advice to heart and want to thank you for your expertieze. I learned alot from my phone the past 3days.
Regards.Johan

E: [libs_mgr]Failed to open '/dev/block/dm-0': No such file or directory

please help me guys , my a71 stock in samsung logo, cant boot into system, and this message appear in recovery when i mounted/system, thank you

Have you tried flashing stock with Odin?

ShaDisNX255 said:
Have you tried flashing stock with Odin?
Click to expand...
Click to collapse
Yes sir, i done it many times, i flash stock rom downloaded from sammobile, successful flash via odin but still goes back into samsung logo
photo bellow, this errors is appear when i wipe data or wipe cache or mounted system

still cant fix thru flashing stock rom in odin, someone help

Did you ever get it fixed?