[Q] How to reset Samsung Galaxy N7000? - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

I recently rooted my 2.3.6 Galaxy note and realised that I really did not need to root(Before rooting, I had to downgrade it to 2.3.5). Now, I am finding a way to reset everything back to square one, where it will be back to 2.3.6 and unrooted. Is there a solution?

My keyboard is also typing out nulls when I type any letter even with CWM recovery mode.

Just go here
http://forum.xda-developers.com/showthread.php?t=1424997
select your previous ROM
download n flash using PC Odin(As you dont need Root)
instruction is on same thread post#2 .

Related

[Q] I don't now what have i done... PLEASE HELP!

I wanted to root my Samsung galaxy s i9000 (gingerbread) so i followed the procedure that i found on the dkszone "How To Root Samsung Galaxy S On Android 2.3.3 Gingerbread I9000 XXJVK ROM" (I can't post a lik). It looked like it worked but after I turned on wi fi it started rebooting constantly. I removed the battery and reinserted it. After I turned it on, it was the same situation (rebooting). I than flashed it with odin founded on tread "Stuck on main screen after root, keeps rebooting" on this site (pit512 was uploaded with PIT button, repart was chacked).
Now it is dead! Please help me.
Flash 2.2 with bootloaders, then flash Stock 2.3 or any 2.3 rom
if you cant get into download mode u have to try it via jig-method to get into download mode.
if you're in download mode reflash with some stock-rom or darkys ressurection-rom.
be sure you tick on repartition and use the 512-pit file.
u may follow this guide: http://www.darkyrom.com/community/i...-darkyrom-gingerbread-jvh-noob-friendly.3080/
IT WORKED!! I managed to flash it with ginger ROM for SGS. The problem was to get into the download mode.
Thanks guys.

[Q] Help: Galaxy S Advance - Softbrick Recovery

Hi, Im new here, Im trying to upgrade my Galaxy S Advance GT-I9070 from 2.3.6 GB to JB using ODIN, I accidentally downloaded the .tar file for Galaxy S2 GT-I9100, upgrade failed, now my phone is soft bricked, Kies cant recognize my phone for recovery, I read some tutorials to unbrick it using ODIN, cant find the right path/file to do it.
heres what I see in after pressing Vol Down/HOME/Power:
ODIN MODE
Product Name: GT-I9070
Custom Binary Download: No
Current Binary: Samsung Official
what files I need to download to restore it back to GB then upgrade to JB? Thanks in advance!
Problem Solved: I downloaded "I9070DXAMD1_I9070OLBAME1_HOME.TAR.md5" and install it, it worked!
Mods Pls close, thanks XDA!
You was lucky, it could be hardbrick. Never flash other phones firmware.

[Q] Problem during update Samsung Galaxy TAB GT-P1000

Hi,
i have samsung galaxy tab gt-p1000 with android 2.2,
i saw on youtube: "How to update Galaxy Tab P1000 to 2.3.6 Gingerbread" (in order to finaly update it to 4.4)
after i run the ODIN with the PIT and PDA file, the process ended successfully but the galaxy stuck in samsung logo after reboot.
What can i do ? how do i first make it load again ? and how can i update it to android 4.4 ?
i neve root it or something, the first action i took is the one described above.
PLEASE HELP (+:
Thanks
Did you remember to wipe data and cache from recovery after installing with Odin?
If that doesn't work, have you tried to return to Froyo and see if it boots?
If you have a sdcard,
Put cm9 based thing in it, flash cf root with cwm(by Odin)
Then you can go recovery.
Flash cm9 first and you can go any ROM.
Don't forget to wipe!

Help me please. My Samsung Galaxy Ace...

Hello. Can you help me? This is what happens:
I tried to upgrade my SGA into Gingerbread 2.3.6 ( my SGA is froyo 2.2.1) . I install ClockWerkMod 5.0.2.6 in my cellphone. It was installed successfully, but after that i go back to the recovery mode, then i stuck in the Samsung Logo and i don't know why, (my cp is already rooted).
I can go to download mode, but the problem is, 1 month ago, after installing CWMode, i decided to factory data reset to fix the problem in the recovery, and now , i cant open my SGA, i tried to flashed it in the Odin, but it says "fail", and now im so nervous, i don't know what to do, hope someone help me with my problem. Thank you
ChrisZkie
ChrisZkie said:
Hello. Can you help me? This is what happens:
I tried to upgrade my SGA into Gingerbread 2.3.6 ( my SGA is froyo 2.2.1) . I install ClockWerkMod 5.0.2.6 in my cellphone. It was installed successfully, but after that i go back to the recovery mode, then i stuck in the Samsung Logo and i don't know why, (my cp is already rooted).
I can go to download mode, but the problem is, 1 month ago, after installing CWMode, i decided to factory data reset to fix the problem in the recovery, and now , i cant open my SGA, i tried to flashed it in the Odin, but it says "fail", and now im so nervous, i don't know what to do, hope someone help me with my problem. Thank you
ChrisZkie
Click to expand...
Click to collapse
Factory reset won't recover you from recovery problem
Try:
Remove the battery for 5-10 mins. Then reboot
Code:
adb reboot
from your pc in recovery/download mode
I think that there is a problem with CWMode. I dunno what is that.
Also you need the following to flash stock ROM only on Samsung Galaxy Ace:
The files I have attached(Unzip them).
Proper Gingerbread ROM for your region(I live in India so I have Indian ROM)
Download from SamMobile
In Odin select OPS Cooper_v1.0.ops
Select all the options except Debug only.
Click 'One Package' button and select the ROM file(it is generally .tar.md5 and India's one is 238MB)
Click 'Start'
Best of Luck

Going back to stock, like it was originally

Hi Guys!
I am currently using a Tab S2 T-815 with TWRP recovery , custom ROM. and root
But for several reasons I want to go back to how it was originally when I bought the tablet: without root, stock recovery and stock samsung OS. Could you guys lend me a hand and help me how should I do it.
I guess I will need a firmware for my device and Odin other then that I don't how to do it...
Thanks in advance!
Use the following link to download your firmware :
Firmware downloader
Follow the guide below on how to flash (skip step 2 since you already downloaded the firmware) :
Flashing stock firmware guide
go back to stock
QUOTE=RaidenHUN;71448045]Hi Guys!
I am currently using a Tab S2 T-815 with TWRP recovery , custom ROM. and root
But for several reasons I want to go back to how it was originally when I bought the tablet: without root, stock recovery and stock samsung OS. Could you guys lend me a hand and help me how should I do it.
I guess I will need a firmware for my device and Odin other then that I don't how to do it...
Thanks in advance!
download your oem rom here www . updato . com
if you already have twrp installed, wipe and instlall
Easiest way... Smart Switch on your PC. Install it... 20 minutes and you'll be setting up your S2.
Use the device initialization tab in Smart switch. It will wipe all the data.

Categories

Resources