Flashtool problem while unlocking bootloader - XPERIA X8 Q&A, Help & Troubleshooting

i am trying to root X8 my cellphone manufacturing date is 11w17 i have check through S1tool and i believe i can unlock my bootloader
after this i tried to follow this procedure
http://www.blogotechblog.com/2012/0...csson-xperia-x10x10-minipro-x8/#comment-14851
when i tried to run Unlock from flashtool > Plugins/X10 Unlock/run
i get this error
03/053/2012 01:53:24 - INFO - <- This level is successfully initialized
03/053/2012 01:53:24 - INFO - Flashtool Version 0.6.8.0 built on 2012-02-26 19:26:25
03/053/2012 01:53:24 - INFO - You can drag and drop ftf files here to start flashing them
03/053/2012 01:53:30 - INFO - Device connected with USB debugging on
03/053/2012 01:53:31 - INFO - Connected device : E15
03/053/2012 01:53:32 - INFO - Installed version of busybox : BusyBox v1.18.4 (2011-04-04 18:40:20 CDT) multi-call binary.
03/053/2012 01:53:32 - INFO - Android version : 2.1-update1 / kernel version : 2.6.29
03/053/2012 01:53:34 - INFO - Root Access Allowed
03/055/2012 01:55:06 - INFO - Please connect your device into flashmode.
03/055/2012 01:55:17 - INFO - Device disconnected
03/055/2012 01:55:47 - INFO - Device connected in flash mode
03/055/2012 01:55:47 - INFO - Opening device for R/W
03/055/2012 01:55:47 - INFO - Reading device information
03/055/2012 01:55:47 - INFO - Phone ready for flashmode operations.
03/055/2012 01:55:47 - INFO - Start Reading property
03/055/2012 01:55:47 - INFO - Reading property finished.
03/055/2012 01:55:47 - INFO - Found semcSL
03/055/2012 01:55:47 - INFO - You can now unplug and turn on device, then plug it again
03/055/2012 01:55:47 - INFO - Waiting for device
03/055/2012 01:55:47 - INFO - Device connected in flash mode
03/055/2012 01:55:49 - INFO - Device disconnected
03/055/2012 01:55:51 - INFO - Device connected in flash mode
03/056/2012 01:56:09 - INFO - Device disconnected
03/056/2012 01:56:12 - INFO - Device connected with USB debugging off
03/056/2012 01:56:12 - INFO - For 2011 devices line, be sure you are not in MTP mode
03/057/2012 01:57:02 - INFO - Log written to C:\Flashtool\flashtool_2012-03-02_01-53-24.log
help me out.

sorry if I'm missing something here because I am messaging from my phone. But I don't understand your problem.please put your problem into actually sentences instead of code please. Unless like I said, I'm missing something here?
Sent from my X8 using XDA App

03/055/2012 01:55:47 - INFO - You can now unplug and turn on device, then plug it again
Click to expand...
Click to collapse
Turn on Your phone and connect it, do not connect it in flash mode now

Bolussimo said:
Turn on Your phone and connect it, do not connect it in flash mode now
Click to expand...
Click to collapse
I am... Cellphone is on while connecting...

Lol, so check again with s1tool. Propably You have unlocked bootloader xD

Cateye said:
03/056/2012 01:56:12 - INFO - Device connected with USB debugging off
Click to expand...
Click to collapse
Cateye said:
I am... Cellphone is on while connecting...
Click to expand...
Click to collapse
Bolussimo forgot to mention that you should not only turn on the phone but also make sure you have USB-Debugging enabled (Settings -> Applications -> Development -> USB debugging).

B.Jay said:
Bolussimo forgot to mention that you should not only turn on the phone but also make sure you have USB-Debugging enabled (Settings -> Applications -> Development -> USB debugging).
Click to expand...
Click to collapse
Cellphone is on and USB-Debugging is enabled

Not unlocked Yet
@Bolussimo its not unlocked...it still reads "R8A029"...it should be "r" not "R"

Bolussimo said:
Lol, so check again with s1tool. Propably You have unlocked bootloader xD
Click to expand...
Click to collapse
i checked again
small "r" means i rooted the phone successfully right?

Its unlocked
'r' means your bootloader is unlocked,
@Bolussimo you ver right
check below link
http://forum.xda-developers.com/showthread.php?t=1436957

sambavadekar said:
'r' means your bootloader is unlocked,
@Bolussimo you ver right
check below link
http://forum.xda-developers.com/showthread.php?t=1436957
Click to expand...
Click to collapse
now its rooted and i want to install different roms what should i do i mean what should be my next step? should i install Clockwork Mod recovery if yes then how??

Next Step
If you just wanted to install ROM's then you didn't have to unlock boot loader
you could have just rooted it using superoneclick or the way you did and install a recovery by following the link in the following thread
http://forum.xda-developers.com/showthread.php?t=921652
then press backspace during load to enter recovery , full wipe(if your now in stock rom)and install custom.zip or update.zip of any rom you like(that works on stock kernel) and reboot.
But since you are unlocked...you can install a better faster kernel like naa or alf
by following the thread here
http://forum.xda-developers.com/showthread.php?t=1350484
(you search for alf yourself in development forum)
and then install a rom that uses these kernel the same way using recovery or flash tool if you hav ".ftf"

1 more thing i want to install Clockwork mod instead of xrecovery how to do that ?
2ndly in order to check bootoader on HTC cellphone we press power button + volume down button
how to check bootloader on X8?

Never Installed Clock Work Mod
I have Never Installed Clock Work Mod...but it always seems to come with all ROM's I install. First I install xrecovery and install any popular ROM....n then TADAA i have CW MOD
Anyway you can install it using x8 toolbox by going here,
http://forum.xda-developers.com/showthread.php?t=1117100
or check this
http://forum.xda-developers.com/showthread.php?t=1179727

please recommend some FAST & Stable Rom for X8

Cateye said:
please recommend some FAST & Stable Rom for X8
Click to expand...
Click to collapse
GingerDX and Alfs Kernel.
Sent from my X8 with Beats Audio.

i rooted the phone and then i tried to install Gingerbread 2.3.7/CM7.2 unofficial port for the Χ8
but now x8 is stuck on Sony Ericsson txt and i cant even enter in Recovery mode
help out plz

Cateye said:
please recommend some FAST & Stable Rom for X8
Click to expand...
Click to collapse
FireDroid and Alfs v07 ICS kernel
Sent from my E15i using xda premium

Cateye said:
i rooted the phone and then i tried to install Gingerbread 2.3.7/CM7.2 unofficial port for the Χ8
but now x8 is stuck on Sony Ericsson txt and i cant even enter in Recovery mode
help out plz
Click to expand...
Click to collapse
On PC: Go to Alfs kernel thread--> download Alfs v07 kernel--> place it to /flashtool/firmwares, run flashtool, select flash (lightning icon), select Alfs v07, click ok. On phone: Turn off phone, press back button and hold it, attach phone to PC while pressing back button, green led appears, release back button, let the PC work. When Flashtool give the "flashing finished" message, unplug the phone. Turn it on. When it shows kernel logo, press back repeatedly to enter recovery. Install custom.zip, choose your ROM, wait, reboot.
This should work. If not, try PC companion or Sony Ericcson Update Service.
Sent from my E15i using xda premium

i tried but its not working on the other hand Sony Ericcson Update Service do not detect X8 so now what ?

Related

XPERIA X8 boot problem

I installed ICS on my XPERIA X8 and it freezes at boot. And I cannot go to recovery mode, where is my backup. I know I need to use FlashTool but I don't know how to use it, because it says:
03/021/2012 15:21:18 - INFO - <- This level is successfully initialized
03/021/2012 15:21:18 - INFO - Flashtool Version 0.6.7.0 built on 2012-01-21 17:31:40
03/021/2012 15:21:18 - INFO - You can drag and drop ftf files here to start flashing them
03/021/2012 15:21:26 - INFO - Device disconnected
03/021/2012 15:21:38 - INFO - Device connected with USB debugging off
03/021/2012 15:21:38 - INFO - For 2011 devices line, be sure you are not in MTP mode
03/021/2012 15:21:49 - INFO - Please connect your device into flashmode.
03/021/2012 15:21:53 - INFO - Device disconnected
And I cannot flash the original image.
Hot to connect the phone?
With " Press and hold back button then plug in the usb cable"?
Now I can flash it but it isn't reboot just say device disconnected, then device connected in flash mode, then device disconnected, then flashing aborted
nearly the same problem here trying to unlock the bootloader on my E15i.
Would appreciate if anyone has a suggestion how to overcome this.Thanks
Try this
kowwi0515 said:
I installed ICS on my XPERIA X8 and it freezes at boot. And I cannot go to recovery mode, where is my backup. I know I need to use FlashTool but I don't know how to use it, because it says:
03/021/2012 15:21:18 - INFO - <- This level is successfully initialized
03/021/2012 15:21:18 - INFO - Flashtool Version 0.6.7.0 built on 2012-01-21 17:31:40
03/021/2012 15:21:18 - INFO - You can drag and drop ftf files here to start flashing them
03/021/2012 15:21:26 - INFO - Device disconnected
03/021/2012 15:21:38 - INFO - Device connected with USB debugging off
03/021/2012 15:21:38 - INFO - For 2011 devices line, be sure you are not in MTP mode
03/021/2012 15:21:49 - INFO - Please connect your device into flashmode.
03/021/2012 15:21:53 - INFO - Device disconnected
And I cannot flash the original image.
Hot to connect the phone?
With " Press and hold back button then plug in the usb cable"?
Now I can flash it but it isn't reboot just say device disconnected, then device connected in flash mode, then device disconnected, then flashing aborted
Click to expand...
Click to collapse
IF you have stock ROM for X8, you can flash with flash tool..
the first, hold volume down in your phone and plug usb kabel to computer..
see your phone have green light, its flash mode.. )
and then go to flash tool, and all its works..
.
Thread moved to Q&A due to it being a question. Would advise you to read forum rules and post in correct section.
Failure to comply with forum rules will result in an infraction and/or ban depending on severity of rule break.
Dheny Brightside said:
IF you have stock ROM for X8, you can flash with flash tool..
the first, hold volume down in your phone and plug usb kabel to computer..
see your phone have green light, its flash mode.. )
and then go to flash tool, and all its works..
Click to expand...
Click to collapse
What?! First of all - not volume down but BACK button.
In flashtool directory You will have drivers folder. Install those drivers. Then reboot Your PC. Copy Your firmware package into firmwares in flashtool directory (.ftf files). Than run flashtool, click on flash, choose the package, click ok, flashtool will aks You to connect Your phone in flash mode. Plug USB cable into PC. Plug in USB cable into phone and while doing this You must hold back button. And flashtool should recognize Your device and start flashing.
Bolussimo said:
What?! First of all - not volume down but BACK button.
You must hold back button.
Click to expand...
Click to collapse
Thank you! You saved my phone's life!
I'm trying GingerDX now, and I making an ''XPERIA X8 MEGAPACK''
Anyway, I do not know why this is:
When I first installed gingerDX i have installed many apps. And when I'll removed this backup, and I installed this rom again, the phone freezes at the boot screen.
(I know how to do it. I flashed the stock rom from my backup, and It is working. But I cannot make a backup from this rom
Because You should do a full wipe When You install ROM again there are some files from old one. And this may cause boot problem
Hi, I've tried this but it doesn't work. My phone just keeps rebooting itself after SE logo animation is done. What can i do?
maretodoric said:
Hi, I've tried this but it doesn't work. My phone just keeps rebooting itself after SE logo animation is done. What can i do?
Click to expand...
Click to collapse
Boot loop...
Send from Brightside Room
Bolussimo said:
Because You should do a full wipe When You install ROM again there are some files from old one. And this may cause boot problem
Click to expand...
Click to collapse
I tried it but it isn't working =(
Boot prroblem ICS
I've tried ICS for stock kernel, but it isn't boot! But i want to try it!
Dude... just flash a stock SE rom via Flashtool and its done
Sent from my Nexus S using XDA Premium
Generally speaking, bootloops imply you are missing the x15 Baseband required for custom ROMs to work: Follow the mediafire link in B.Jay's profile and find the x15 Baseband corresponding to your X8 version (It's in the sticker under the battery)... Hope this helps.
EDIT: Update your FlashTool Version!!!! http://androxyde.github.com/Flashtool/

X8 Can't boot to flashmode

Hi guys, i don't know what happened but since the last time i flashed kernel, i can't boot to flashmode anymore.. I'm using nAa ICS 2 kernel and MiniCM9 3.0.1 by nAa.. I want to flash to nAa-ics-3 and then update to 3.0.2 but can't boot my phone to flashmode.. It just doesn't respond while I'm holding the back button.. Tried installing the LATEST version of flashtool, tried removing and reinstalling usb drivers, rebooting pc several times but nothing helps.
Flash tool just says that the phone is connected but usb debugging is off.. But when i boot it back into normal state, debugging is on, kernel and software is recognized and everything is working as it should..
Had the same problem using the latest version of FlashTool!
I then tried v 0.6.9.1 and it worked flawlessly, so try this version!
Still nothing.. Here's the output from the FlashTool
Code:
27/038/2012 13:38:07 - INFO - <- This level is successfully initialized
27/038/2012 13:38:07 - INFO - Flashtool Version 0.6.9.1 built on 2012-04-09 19:22:19
27/038/2012 13:38:07 - INFO - You can drag and drop ftf files here to start flashing them
27/038/2012 13:38:12 - INFO - Device connected with USB debugging on
27/038/2012 13:38:12 - INFO - Connected device : E15
27/038/2012 13:38:13 - INFO - Installed version of busybox : BusyBox v1.19.4-cm9 bionic (2012-03-17 17:50 +0100) multi-call binary.
27/038/2012 13:38:13 - INFO - Android version : 4.0.4 / kernel version : 2.6.29.6-nAa-ics-02
27/038/2012 13:38:13 - INFO - Root Access Allowed
27/038/2012 13:38:55 - INFO - Selected E15_nAa-ics-03_2.6.29.6-nAa-ics-03.ftf
27/038/2012 13:38:55 - INFO - Preparing files for flashing
27/038/2012 13:38:55 - INFO - Please connect your device into flashmode.
27/039/2012 13:39:01 - INFO - Device disconnected
27/040/2012 13:40:57 - INFO - Device connected with USB debugging off
27/040/2012 13:40:57 - INFO - For 2011 devices line, be sure you are not in MTP mode
I just can't figure it out.. :/
1 disconnect your device
2 in flashtool click on the flash icon -> flashmode -> select what you want to flash -> click ok
3 flashtool will say you to connect the phone while holding down the back key. do it
you need to connect the phone after flashtool says so, not before (according to the log, you connected the phone and then choosed file to flash)
Put on the stock rom (the one we get from the Sony) or backup u have of your stock rom.. then try to flash it..
You can get stock rom by using PC companion and update o repair or a ftf file from our own XDA...:thumbup:
fifo171 said:
1 disconnect your device
2 in flashtool click on the flash icon -> flashmode -> select what you want to flash -> click ok
3 flashtool will say you to connect the phone while holding down the back key. do it
you need to connect the phone after flashtool says so, not before (according to the log, you connected the phone and then choosed file to flash)
Click to expand...
Click to collapse
Still doesn't work.. I'm holding the back button while the phone is off and while I'm connecting the charger.. And still won't boot to flashmode.. And, as soon as i let go of the back button, the phone starts charging itself..
@sidhart
I'll try that on a weekend.. Now I'm afraid not to brick it xD i need it for work during the week.. If i brick it on a weekend, i will be able to buy a new one on time.. :/
Is your phone recognized by the PCC when you connect it?
Sent from my W8
Same thing happened with me the debugging was not detected when I first tried to unlock bootloader so I went back to the W8 stock rom and then it worked properly...
Try it only when there is no other way out...
Sent from my W8
Use SUES to revert back to stock rom/kernel and reflash from there. Also had this problem a few months back changing kernels.
With nAa and Alfs for cm7 kernels u dont have to hold back button it boots to flash mode automaticly when powered off and u plug the cable.
@sidhart The phone is recognized by PCC but as X10 not X8 xDDD So I'm afaid to revert to stock flash/kernel over PCC..
@Pipi14 I'm using nAa ICS kernel ( 02 ) for CM9, you think it might be the same?
maretodoric said:
@sidhart The phone is recognized by PCC but as X10 not X8 xDDD So I'm afaid to revert to stock flash/kernel over PCC..
@Pipi14 I'm using nAa ICS kernel ( 02 ) for CM9, you think it might be the same?
Click to expand...
Click to collapse
Try reinstaling the rom cm9 using cwm then it might work properly..
Dont forget factory reset and wipe data cache..
Reply me if you try it...
Sent from my W8
Yeah i have used nAa kernel from the beginning and all his kernels automaticly boot in to flashmode when turned off and plugging the cable. I used MiniCm9 3.0.2 for two days reverted back to MiniCm7 2.2.0 cuz Its kinda slow for me still. But maybe next release of MiniCm9 will be my daily rom.
Hit thanx if i helped.
OMG i didn't knew this.. It did work I've flashed the new kernel sucessfully Thanks a lot
maretodoric said:
OMG i didn't knew this.. It did work I've flashed the new kernel sucessfully Thanks a lot
Click to expand...
Click to collapse
Yaaaay
Click THANKS if I helped.
And if your generous donate to me please
Sent from my X8
maretodoric said:
Still doesn't work.. I'm holding the back button while the phone is off and while I'm connecting the charger.. And still won't boot to flashmode.. And, as soon as i let go of the back button, the phone starts charging itself..
:/
Click to expand...
Click to collapse
WORKED For Me in Xperia Pro with Official ICS.
Many Thanks
- Nazmul
pipi14 said:
Yeah i have used nAa kernel from the beginning and all his kernels automaticly boot in to flashmode when turned off and plugging the cable. I used MiniCm9 3.0.2 for two days reverted back to MiniCm7 2.2.0 cuz Its kinda slow for me still. But maybe next release of MiniCm9 will be my daily rom.
Hit thanx if i helped.
Click to expand...
Click to collapse
i have same problem like maretodoric..but my phone still can't boot to flashmode without holding back button or holding back button..any solution
my karnel nAa-ics-02 and my rom miniCM9 3.0.5
here the log flashtool :
Code:
02/022/2013 01:22:56 - INFO - <- This level is successfully initialized
02/022/2013 01:22:56 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
02/022/2013 01:22:56 - INFO - You can drag and drop ftf files here to start flashing them
02/023/2013 01:23:03 - INFO - Device connected with USB debugging on
02/023/2013 01:23:04 - INFO - Connected device : E15
02/023/2013 01:23:04 - INFO - Installed version of busybox : BusyBox v1.20.2-cm9 bionic (2012-07-14 01:52 +0200) multi-call binary.
02/023/2013 01:23:04 - INFO - Android version : 4.0.4 / kernel version : 2.6.29.6-nAa-ics-02 / Build number : IMM76L
02/023/2013 01:23:05 - INFO - Root Access Allowed
02/023/2013 01:23:44 - INFO - Selected E15_2.6.32.60-nAa-03.ftf
02/023/2013 01:23:44 - INFO - Preparing files for flashing
02/023/2013 01:23:45 - INFO - Please connect your device into flashmode.
02/023/2013 01:23:57 - INFO - Device disconnected
02/024/2013 01:24:13 - INFO - Device connected with USB debugging off
02/024/2013 01:24:13 - INFO - For 2011 devices line, be sure you are not in MTP mode
maretodoric said:
OMG i didn't knew this.. It did work I've flashed the new kernel sucessfully Thanks a lot
Click to expand...
Click to collapse
hey maretodoric..tell me how u boot to flash mode pleasee..step by step
Can't you read?
02/024/2013 01:24:13 - INFO - Device connected with USB debugging off
Click to expand...
Click to collapse
I'm not even gonna bother posting any more info as you've now enough ammo to search the forum and find the solution yourself.
Give a man a fish....

Can't flash xperia x8

Hi!
When i try to flash the mobile, using flash tool, i connect it pressing back bottom (flash mode), the green light turns on and a few secons later it turns off and appear the charging screen and nothing happens... sometimes it worked, yesterday worked one time with a back up of the original rom, but i need a free rom to use another sim card.
I rooted it some time ago, but i installed some rooms to test them and i don't know if i need to root again (if its rooted yet). I tried to root with supereasyclick, but i got no lucky with 2 versions of the app. With the last version of flash tool the root bottom is grey and i don't know how to do it, also i don't know if i need to unlock the bootloader again...
So i'm trying to flash the mobile with nAa kernel and it seems imposible to me...
Please help me!
ChazyTheBest said:
Hi!
When i try to flash the mobile, using flash tool, i connect it pressing back bottom (flash mode), the green light turns on and a few secons later it turns off and appear the charging screen and nothing happens... sometimes it worked, yesterday worked one time with a back up of the original rom, but i need a free rom to use another sim card.
I rooted it some time ago, but i installed some rooms to test them and i don't know if i need to root again (if its rooted yet). I tried to root with supereasyclick, but i got no lucky with 2 versions of the app. With the last version of flash tool the root bottom is grey and i don't know how to do it, also i don't know if i need to unlock the bootloader again...
So i'm trying to flash the mobile with nAa kernel and it seems imposible to me...
Please help me!
Click to expand...
Click to collapse
Did you unlock your bootloader? If not, check your manufacture date from the battery. It says "10wXX" or "11wXX" or "12wXX". When your device is past 11w29 and above like 11w29,11w30,...... you can't unlock your bootloader. What happens when you can't? You can NEVER FLASH OTHER KERNELS except your STOCK KERNEL to your device! And also the STOCK FIRMWARE you can only FLASH! So that's why it can't properly enter into the flash mode.
Some tips for you: Start flashtool first if you're trying to flash back to original firmware. And choose the files and ok and wait for it for preparing files and when it says to start to flash mode and connect! Then you press your back button to your device FIRST and connect USB and when it turns green LED, you can let it go I meant the BACK button! Hope it helped!
Click "Thanks" If I helped you out!
---------- Post added at 05:22 PM ---------- Previous post was at 05:18 PM ----------
You can root with SuperOneClick ShortFuse! Connect your device in USB debugging!
Settings > Applications > Development > Tick "USB Debugging"
And connect your device to your computer and click "Root" button on SuperOneClick and wait for it! And then, Viola! Your device is now rooted!
You have to reboot your device for first time to make root access work! Then install Root Explorer and Superuser will prompt for root access!
That way you can tell it is successfully rooted!
P.S: This guide for you is only for 2.1 Stock Firmware
ChazyTheBest said:
Hi!
When i try to flash the mobile, using flash tool, i connect it pressing back bottom (flash mode), the green light turns on and a few secons later it turns off and appear the charging screen and nothing happens... sometimes it worked, yesterday worked one time with a back up of the original rom, but i need a free rom to use another sim card.
I rooted it some time ago, but i installed some rooms to test them and i don't know if i need to root again (if its rooted yet). I tried to root with supereasyclick, but i got no lucky with 2 versions of the app. With the last version of flash tool the root bottom is grey and i don't know how to do it, also i don't know if i need to unlock the bootloader again...
So i'm trying to flash the mobile with nAa kernel and it seems imposible to me...
Please help me!
Click to expand...
Click to collapse
if u wanna to check your phone was rooted or not
Just plug in mobile to PC and click Flashtool.exe
u can see there if your phone was rooted or not by see the log
like this
Code:
05/008/2013 20:08:35 - INFO - <- This level is successfully initialized
05/008/2013 20:08:36 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
05/008/2013 20:08:36 - INFO - You can drag and drop ftf files here to start flashing them
05/008/2013 20:08:42 - INFO - Device connected with USB debugging on
05/008/2013 20:08:43 - INFO - Connected device : E15
05/008/2013 20:08:43 - INFO - Installed version of busybox : BusyBox v1.20.1-cm7 static (2012-05-28 03:57 +0200) multi-call binary.
05/008/2013 20:08:43 - INFO - Android version : 2.3.7 / kernel version : 2.6.29.6-nAa-14 / Build number : 3.0.1.A.0.145
05/008/2013 20:08:43 - INFO - Installing toolbox to device...
05/008/2013 20:08:43 - INFO - Pushing C:\Flashtool\custom\root\ftkit.tar to /data/local/tmp
05/008/2013 20:08:44 - INFO - Running installftkit as root thru sysrun
05/008/2013 20:08:44 - INFO -[B] Root Access Allowed[/B]
if NOT and u want to root your phone
just click on Padlock icon
dont forget to check the USB debugging and allow non-market application on setting
Cheers!
Thanks for answering.
I forget to say onething: i flashed it one time, so i don't remember what manufacture date have my phone, but it must work because i did it one time.
When i start flash tool and connect the phone, it doesn't detect it. Just when i start it (and without usb connected) it says:
05/014/2013 17:14:12 - INFO - <- This level is successfully initialized
05/014/2013 17:14:12 - INFO - Flashtool Version 0.9.10.2beta6 built on 2013-04-21 22:23:00
05/014/2013 17:14:18 - INFO - Device connected with USB debugging on
05/014/2013 17:14:18 - ERROR - Cannot identify your device.
05/014/2013 17:14:18 - INFO - Selecting from user input
Click to expand...
Click to collapse
without the phone connected...
Ok, the manufacture date is 10W45, so should work perfectly. What tool can i use to unlock the bootloader? The objective is unlock the sim restriction, so if there is a easiest way, just tell me please.
When i flashed yesterday the backup i exclude TA (simlock.ta) to see if without that, the sim locker is removed, but nothing...
The flash tool version im using is "0.9.10.2beta6 built on 2013-04-21 22:23:00" (java version 1.7.0_17 64bits Edition)
I installed pc companion, and drivers were installed too. Also drivers from flash tool folder (x8, flashmode and fastboot)
Really... i don't know why flash tool doesn't recognize the phone when i plugged in, i don't know what it recognize when i start it... here the full log (debug). Also, the backup i flashed (downloaded from internet) is e15a and my phone is e15i, does it matter?
Please, give me working tools to unlock bootloader or something else (links)
Thanks!
ChazyTheBest said:
Thanks for answering.
I forget to say onething: i flashed it one time, so i don't remember what manufacture date have my phone, but it must work because i did it one time.
When i start flash tool and connect the phone, it doesn't detect it. Just when i start it (and without usb connected) it says:
without the phone connected...
Ok, the manufacture date is 10W45, so should work perfectly. What tool can i use to unlock the bootloader? The objective is unlock the sim restriction, so if there is a easiest way, just tell me please.
When i flashed yesterday the backup i exclude TA (simlock.ta) to see if without that, the sim locker is removed, but nothing...
The flash tool version im using is "0.9.10.2beta6 built on 2013-04-21 22:23:00" (java version 1.7.0_17 64bits Edition)
I installed pc companion, and drivers were installed too. Also drivers from flash tool folder (x8, flashmode and fastboot)
Really... i don't know why flash tool doesn't recognize the phone when i plugged in, i don't know what it recognize when i start it... here the full log (debug). Also, the backup i flashed (downloaded from internet) is e15a and my phone is e15i, does it matter?
Thanks!
Click to expand...
Click to collapse
okay
make sure all driver was installed successfully
X8 driver
gordon gates
driver from C:\Flashtool\Driver
How to unlock??
1. Use s1 tool (search or read this!)
or
2. Use Flashtool
BlackRabbit1703 said:
okay
make sure all driver was installed successfully
X8 driver
gordon gates
driver from C:\Flashtool\Driver
How to unlock??
1. Use s1 tool (search or read this!)
or
2. Use Flashtool
Click to expand...
Click to collapse
I have s1tool, there are only 3 options: identify, flash and restore... what i have to do?
identify:
Welcome to S1 tool.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "r8A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "0020/00BC"
LOADER VERSION: "r4A060"
MODEL (from GDFS): E15a
SOFTWARE VERSION: 1236-9291_2.0.1.A.0.47
CUSTOM VERSION: 1243-9502_R3B
FILESYSTEM VERSION: WORLD-1-2-5_2.0.1.A.0.47
SERIAL NO: CB511R82AK
SEMC SIMLOCK CERTIFICATE
Elapsed:14 secs.
Click to expand...
Click to collapse
When i use SuperOneClick to root the phone it give me a c# error (Exception error) "error: more than on device and emulator"... what the hell mean that? i only have 1 phone conected...
Thanks!
ChazyTheBest said:
I have s1tool, there are only 3 options: identify, flash and restore... what i have to do?
identify:
When i use SuperOneClick to root the phone it give me a c# error (Exception error) "error: more than on device and emulator"... what the hell mean that? i only have 1 phone conected...
Thanks!
Click to expand...
Click to collapse
with s1 tool click identify to unlock
hey...I think u had unlock your phone
by read your log
r -> unlock
R -> Lock
To all above:
You cannot sim unlock a phone with any tools here on XDA. It pays to read the op thoroughly before answering with help.

[Q] Got a hard brick :( plz plz plz helllppppp

I was flashing the alinov's stock kernel and i think it was a bad download,the kernel got flashed succesfully but as u said my device is not powering off nor it is responding any thing on the screen,plz plz plz help me,how to recover mmy device,i came across adfad666 here
http://forum.xda-developers.com/showthread.php?t=2457353
guide but i dont know how to do a full wipe,i even tried to flash stock ftf but it also didnt worked for me,plz help me
Device has to be off to flash an ftf. Have you taken the back cover off and pressed the hard off button?
Sent from my C5303 using XDA Premium 4 mobile app
Parkside said:
Device has to be off to flash an ftf. Have you taken the back cover off and pressed the hard off button?
Sent from my C5303 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes i tried that also but the device is not vibrating at all,i tried to connect it to my chrger it doesnt even blink the led indication for charging,the device is also not recognized by the laptop,plz help any body
UPDATE:
i tried to connect it to my laptop frstly i removed my sim n then i tried to reflash it,it doesnt flashed it though,my laptop recognized it as a usb input device and the chrging led is now blinking
shawamawa said:
UPDATE:
i tried to connect it to my laptop frstly i removed my sim n then i tried to reflash it,it doesnt flashed it though,my laptop recognized it as a usb input device and the chrging led is now blinking
Click to expand...
Click to collapse
Try again HARD OFF and then connect your phone to flashmode.then with flashtool flash stock .ftf!
shawamawa said:
I was flashing the alinov's stock kernel and i think it was a bad download,the kernel got flashed succesfully but as u said my device is not powering off nor it is responding any thing on the screen,plz plz plz help me,how to recover mmy device,i came across adfad666 here
http://forum.xda-developers.com/showthread.php?t=2457353
guide but i dont know how to do a full wipe,i even tried to flash stock ftf but it also didnt worked for me,plz help me
Click to expand...
Click to collapse
I just had something similar;
I posted it here: http://forum.xda-developers.com/showthread.php?t=2488870 Might work for you too.
KiaTheKing said:
Try again HARD OFF and then connect your phone to flashmode.then with flashtool flash stock .ftf!
Click to expand...
Click to collapse
I tried it a many times,doent worked
Stirlin said:
I just had something similar;
I posted it here: http://forum.xda-developers.com/showthread.php?t=2488870 Might work for you too.
Click to expand...
Click to collapse
THanks i followed the instructions on ur thread and ended with this,
18/058/2013 09:58:15 - INFO - Selected Xperia SP (C5302) / 12.0.A.2.245 / Indian
18/058/2013 09:58:15 - INFO - Preparing files for flashing
18/059/2013 09:59:10 - INFO - Please connect your device into flashmode.
18/059/2013 09:59:46 - INFO - Device connected with USB debugging off
18/059/2013 09:59:46 - INFO - For 2011 devices line, be sure you are not in MTP mode
18/059/2013 09:59:50 - INFO - Device disconnected
18/000/2013 10:00:55 - INFO - Device connected with USB debugging off
18/000/2013 10:00:55 - INFO - For 2011 devices line, be sure you are not in MTP mode
18/001/2013 10:01:03 - INFO - Device disconnected
18/001/2013 10:01:37 - INFO - Flash canceled
:crying:
............................................................................................................................................
Someone here can plz PM doomlord and adfad666 about this thread,plz
shawamawa said:
I tried it a many times,doent worked
THanks i followed the instructions on ur thread and ended with this,
18/058/2013 09:58:15 - INFO - Selected Xperia SP (C5302) / 12.0.A.2.245 / Indian
18/058/2013 09:58:15 - INFO - Preparing files for flashing
18/059/2013 09:59:10 - INFO - Please connect your device into flashmode.
18/059/2013 09:59:46 - INFO - Device connected with USB debugging off
18/059/2013 09:59:46 - INFO - For 2011 devices line, be sure you are not in MTP mode
18/059/2013 09:59:50 - INFO - Device disconnected
18/000/2013 10:00:55 - INFO - Device connected with USB debugging off
18/000/2013 10:00:55 - INFO - For 2011 devices line, be sure you are not in MTP mode
18/001/2013 10:01:03 - INFO - Device disconnected
18/001/2013 10:01:37 - INFO - Flash canceled
:crying:
............................................................................................................................................
Someone here can plz PM doomlord and adfad666 about this thread,plz
Click to expand...
Click to collapse
When the phone is in Flashmode, and the device isn't receiving any activity, it will restart itself to the system.
shawamawa said:
I tried it a many times,doent worked
THanks i followed the instructions on ur thread and ended with this,
18/058/2013 09:58:15 - INFO - Selected Xperia SP (C5302) / 12.0.A.2.245 / Indian
18/058/2013 09:58:15 - INFO - Preparing files for flashing
18/059/2013 09:59:10 - INFO - Please connect your device into flashmode.
18/059/2013 09:59:46 - INFO - Device connected with USB debugging off
18/059/2013 09:59:46 - INFO - For 2011 devices line, be sure you are not in MTP mode
18/059/2013 09:59:50 - INFO - Device disconnected
18/000/2013 10:00:55 - INFO - Device connected with USB debugging off
18/000/2013 10:00:55 - INFO - For 2011 devices line, be sure you are not in MTP mode
18/001/2013 10:01:03 - INFO - Device disconnected
18/001/2013 10:01:37 - INFO - Flash canceled
:crying:
............................................................................................................................................
Someone here can plz PM doomlord and adfad666 about this thread,plz
Click to expand...
Click to collapse
Al you need to do is to firts go to flashtool (dont connect your device) go to flashmode.choose ftf that you want to install, click flash.and then you will get prepare for flashing line.when its prepared it will said you to connect phone in flashmode..NOW CONNECT PHONE IN FLASHMODE.And thats it!!just connect device in right time!!
Sent from my C5303 using xda app-developers app
Keep volumm down and connect your phone to computer >> open PC companion >> click on Support Zone >> Click on Phone Software update >> Click Repair >> Wait till it done . Try it's . Good luck .
the best method is download SONY UPDATE SERVICE software to your pc. after installing update service, turnoff your mobile then press and hold the volume down key , and connect it with your pc. (even if your phone is not charged no problem ). release the volume down key when the on screen instruction says it. after that if the system says your phone has latest software, then select reinstall the software. wait until it finish. thats all.
dont do too more
just power off ur sp bu stick the reset button in the backcover,and power on,see what happen,take it easy and carefully
shawamawa said:
I was flashing the alinov's stock kernel and i think it was a bad download,the kernel got flashed succesfully but as u said my device is not powering off nor it is responding any thing on the screen,plz plz plz help me,how to recover mmy device,i came across adfad666 here
http://forum.xda-developers.com/showthread.php?t=2457353
guide but i dont know how to do a full wipe,i even tried to flash stock ftf but it also didnt worked for me,plz help me
Click to expand...
Click to collapse

Unable to access xRecovery after restore process

Hello,
After flashing this ROM I rebooted my device then it stuck to Sony Ericsson splash screen; I tried to skip it but unfortunately I couldn't so removed the battery then tried to access xRecovery as usually but I couldn't do that!!!
My Phone now is a brick and I hopeful to get some help from you to access xRecovery to be able to flash another ROM doesn't broke my device.
The original installed ROM is: http://forum.xda-developers.com/showthread.php?t=955467 ;it was working well but it's working under Android 2.1 while I'm looking for much modern version of Android for that I tried to install http://forum.xda-developers.com/showthread.php?t=1575094
I suspect that using xRecovery instead of CWM is the main reason of breaking my device but this is very late because I did my stupid move and the disaster done:crying:
1. The rom you flashed is for custom kernels, your phone is bricked because you flashed it on stock kernel
2. U shouldn't be using xrecovery, its outdated, use CWM
Respawning in 3....2....1.....
---------- Post added at 08:10 PM ---------- Previous post was at 08:08 PM ----------
Use this to recover your phone
http://forum.xda-developers.com/showthread.php?t=1481630
Respawning in 3....2....1.....
Gogeta said:
[/COLOR]Use this to recover your phone
http://forum.xda-developers.com/showthread.php?t=1481630
Click to expand...
Click to collapse
When I arrived to this step:
4.Now wait for a while till it says you to "remove your phone,press the back button and hold it and install the USB".
Click to expand...
Click to collapse
My battery dead:crying: and another thing, I can't power it off so I've to remove the battery manually to be able to power it off.
How can I power it on while the battery off (I can see a red flashing led)
After connecting my device on recharge I can see the damn splash screen of Sony Ericsson.
I tried to use same steps as mentioned in the guide but keeping pressing on "back" button didn't do anything!
here's the log of my try:
Code:
29/044/2013 17:44:30 - INFO - <- This level is successfully initialized
29/044/2013 17:44:31 - INFO - Flashtool Version 0.6.9.1 built on 2012-04-09 19:43:11
29/044/2013 17:44:31 - INFO - You can drag and drop ftf files here to start flashing them
29/044/2013 17:44:38 - INFO - Device disconnected
29/051/2013 17:51:45 - INFO - Device connected with USB debugging off
29/051/2013 17:51:45 - INFO - For 2011 devices line, be sure you are not in MTP mode
29/052/2013 17:52:35 - INFO - Selected X8 E15i 2.1.1.C.0.0._un.ftf
29/052/2013 17:52:35 - INFO - Preparing files for flashing
29/053/2013 17:53:01 - INFO - Please connect your device into flashmode.
29/053/2013 17:53:14 - INFO - Device disconnected
29/053/2013 17:53:37 - INFO - Device connected with USB debugging off
29/053/2013 17:53:37 - INFO - For 2011 devices line, be sure you are not in MTP mode
29/055/2013 17:55:57 - INFO - Device disconnected
29/056/2013 17:56:08 - INFO - Device connected with USB debugging off
29/056/2013 17:56:08 - INFO - For 2011 devices line, be sure you are not in MTP mode
29/057/2013 17:57:00 - INFO - Flash canceled
mbnoimi said:
After connecting my device on recharge I can see the damn splash screen of Sony Ericsson.
I tried to use same steps as mentioned in the guide but keeping pressing on "back" button didn't do anything!
here's the log of my try:
Code:
29/044/2013 17:44:30 - INFO - <- This level is successfully initialized
29/044/2013 17:44:31 - INFO - Flashtool Version 0.6.9.1 built on 2012-04-09 19:43:11
29/044/2013 17:44:31 - INFO - You can drag and drop ftf files here to start flashing them
29/044/2013 17:44:38 - INFO - Device disconnected
29/051/2013 17:51:45 - INFO - Device connected with USB debugging off
29/051/2013 17:51:45 - INFO - For 2011 devices line, be sure you are not in MTP mode
29/052/2013 17:52:35 - INFO - Selected X8 E15i 2.1.1.C.0.0._un.ftf
29/052/2013 17:52:35 - INFO - Preparing files for flashing
29/053/2013 17:53:01 - INFO - Please connect your device into flashmode.
29/053/2013 17:53:14 - INFO - Device disconnected
29/053/2013 17:53:37 - INFO - Device connected with USB debugging off
29/053/2013 17:53:37 - INFO - For 2011 devices line, be sure you are not in MTP mode
29/055/2013 17:55:57 - INFO - Device disconnected
29/056/2013 17:56:08 - INFO - Device connected with USB debugging off
29/056/2013 17:56:08 - INFO - For 2011 devices line, be sure you are not in MTP mode
29/057/2013 17:57:00 - INFO - Flash canceled
Click to expand...
Click to collapse
You have to hold back button when phone is switched off and you are connecting it with computer
Respawning in 3....2....1.....
Gogeta said:
You have to hold back button when phone is switched off and you are connecting it with computer
Respawning in 3....2....1.....
Click to expand...
Click to collapse
Thanks a lot, the issue was related to old version of Flashtool; after using flashtool-0.9.13.0-linux.tar.7z with USB drivers as mentioned in this post; everything went perfectly.
Thanks once agian for help and I wish you best.
BTW, I want to use Android 4.0 or newer; may you please advice me which ROM is better.
mbnoimi said:
Thanks a lot, the issue was related to old version of Flashtool; after using flashtool-0.9.13.0-linux.tar.7z with USB drivers as mentioned in this post; everything went perfectly.
Thanks once agian for help and I wish you best.
BTW, I want to use Android 4.0 or newer; may you please advice me which ROM is better.
Click to expand...
Click to collapse
Try different jelly bean roms...
Everyone has different setup and different experience, try it yourself.
And on our x8, 4.0 is heavier than 4.1 so I recommend to use jelly bean
Respawning in 3....2....1.....
Gogeta said:
And on our x8, 4.0 is heavier than 4.1 so I recommend to use jelly bean
Click to expand...
Click to collapse
Actually I want to use Android 4.0 or newer because some used apps (ex. ownCloud) need a newer version than 2.1 and because 2.1 is very slow with my contacts (about 1500 contact). So I want to know before flashing a new ROM if it will fix these two issues or not.
mbnoimi said:
Actually I want to use Android 4.0 or newer because some used apps (ex. ownCloud) need a newer version than 2.1 and because 2.1 is very slow with my contacts (about 1500 contact). So I want to know before flashing a new ROM if it will fix these two issues or not.
Click to expand...
Click to collapse
Flash 2.3 if your apps are compatible with it
Otherwise 4.1
Respawning in 3....2....1.....

Categories

Resources