Hi there,
There has been a lot of discussion about how to get the USA ATT version of the P925 Thrill4g up and running fully with 4g enabled and working.
I have upgraded my LG Thrill 4G from stock froyo direct from the AT&T store to Android Version: 2.3.5 with Baseband: L620_MODEM_SIC_01.1042.00 showing Model Number: LG-P925g with Kernel Version 2.6.35.7 and Build Number GRJ90. I assure you, I am too stupid to make any of this up, so if you are interested in reading the easily enough accomplished, very descriptive method, read on.
After many a try due to the numerous blind alley posts and dead links, here are my findings:
Ingredients: Tip: Download and extract these BEFORE following the process:
The flashing tool that I found here
The flashing tool fixes 1 & 2 that I found here
The driver that I had to use (attched) named "LGAndroidDriver_Ver_1.0_All.exe".zip
The rom/kdz that I found here
The program to root the rom that I found here
The cleanup program to remove the unwanted programs from the new rom that I found here
Fine Print:
1. Back Up Everything - This will wipe your phone, which isn't that big of a deal if your most important data is in the cloud with Google.
2. I created NOTHING. I just failed until I found exactly what works and could perform the tasks with relative ease, precision, and get reliable and predictable results. All the links and downloads here....please follow those links and give those people some love.
3. Yada Yada I take no responsibility if you roger your phone but good. I can help you, but I assure you, there are many other people here who are more experienced who would be happy to do that for you.
4. This post is intentionally verbose so that everyone can participate in unscrewing themselves from AT&T, please feel free to comment on your findings with this process.
5. Unless explicitly otherwise specified, run all programs as administrator, and, if you can, in XP SP2 compatibility mode.
(Relatively easy method): Read ALL instructions completely before proceeding.
A. Install Small Server And Modify It
I went here and followed the instructions - they are basic:
1. Download http://smallsrv.com/ - the latest version will do nicely
2. Install and Run program as an administrator (right click on program)
3. Go to Settings (right click on the top menu bar of the program)
4. Go to HTTP Settings
5. Change Port to 9002
6. Extract the Content of the zip file named "www.zip" into C:\shttps\www
7. Edit C:\windows\system32\drivers\etc\host in notepad and add the following line:
127.0.0.1 csmg.lgmobile.com (click here for screenshots of all of this)
8. Save and close the file
B. Drivers, Parsers, and COM-Phone Connection
I followed the instructions here . Follow along!
1. Install Drivers (attached) and msxml.msi (found in the flashing tools you downloaded), then reboot your computer
2. Open Server Program, leave it running
3. Remove your phone battery
4. open your pc device manager (in control panel) and look at COM and PORT section
5. hold volume up button (only) and connect your mobile to pc through USB while pressing this button, and keep pressing until you see a new port has been added and installed in your COM and PORT section (about 15-20 sec), now you can release the button, be sure that port will stay apparent after releasing the button, or repeat this step (with longer press on volume up button)
6. At this point, you may/will need to point your COM/PORT (LGE MOBILE) to the newly install drivers (found at C:\Program Files\LG Electronics) so that the computer knows what device you just plugged in)
7. put your battery back and don't touch your phone again (edit: It took me a bit to get the COM/PORT to register, but when it does - LET GO OF THE VOLUME+ BUTTON. Alternatively you can, while holding the volume+ button, right click on the COM/PORT error you see and then start pointing the computer to the appropriate driver) Do not proceed until your computer recognizes the device. If you would like, you can map the PORT/COM to COM41 by clicking on ports, right click on the LGE USB, select properties, click on the tab port settings, click on advanced, change port to 41 and click ok
8. As an aside, you can also begin the flashing process below without completing the above steps by putting your device in debugging mode. That post is here but it did not work for me that way so I provided the instructions above for those of you who need a more certain method
C. Flash Phone
Open/unzip/extract the flashing tools to begin the flashing process with screenshots here
1. Install "B2CAppSetup.exe" and run LGMobile update - the ONLY error you should encounter is that LGMobile update can't find an internet connection. Good! The Server is working and LGMobile won't kill the update process.
2. Run as administrator "windows enabler.exe" and switch to the "ON" position( left click on icon in icon tray)
3. Your phone is already connected, so you need to Start "UpTestEX_mod2_marwin.exe", select and browse to your v20c KDZ file.
Set options emeregency, 3gQCT as pictured and press "NORMAL WEB UPGRADE TEST"
4. On the next screen, hit upgrade start
5. On the pop-up, hit clear registry, other country in the dropdown, and your language of choice (presumably english) and select ok.
6. The program will start the official LG Flasher - have a 5 minute coffee break.
D.Clean Up
Your phone is now flashed.
1. Hit exit on the LG Flasher and unplug your phone.
2. Press and hold the 3D button and the Volume- (down) button, and the power button until you feel a vibration
3. Once the wipe screen comes up, go ahead and clear out everything one at a time (the volume keys are up and down and the 3d key is enter)
4. After that, select the reboot phone option
5. Reinstall SIM card and External SD
6. Power phone on
7. Skip or exit all prompts
8. Set phone in debugging mode (settings/applications/development/debugging)
9. Connect phone to computer - device manager should still be open - make sure it picks up the COM/PORT - you don't have to hold down any buttons
E. Root phone
We're getting close - almost there!
1. You downloaded Megatron from here - open run.bat
2. It will root your phone for you (one of the easiest steps ever) by pressing enter.
3. The phone will restart many times. When run.bat is all finished, it will ask you to press enter to exit - do not remove phone due to the next step - just press enter and the window will go away
F. Clean Up
Clean up Rogers Bloat referenced from post here
1. In the Remove Roggers File folder, click run.bat and make your selections
2. I chose 1 and 3 and leave the APN alone
3. Then, press 4 to reboot your phone
4. Finally, disconnect phone from computer
G. Enable Data Connection
Set your APN to enable data connection (you should already see 4g, but you won't yet have data or MMS
1. On your phone, go to Settings -> Wireless & networks -> Mobile Networks -> enable Data Enabled -> Access Point Names -> menu button -> New APN ->
2. Place these values in manually: excerpted from post here
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
Leave the rest of the fields blank
APN Type: leave blank
3. Save and Select APN
4. Reboot Phone
---At this point, you should be all finished with a working Gingerbread AT&T Thrill4G getting 4G on your phone, receiving MMS, etc. so go ahead and set up your google account and finish that pot of coffee.
I believe the last method for 4g works to get data enabled, but not at 4g speeds ( or at least their h+ speeds)
There's a method to update/replace the flex provider.HTML, I'm still not 100% clear on how to change that so i stuck to the method you laid out and have had no problems.
Besides, i keep my antenna on 2g mode only to save battery life, I'm on wifi at home and at work so i hardly have a need for their faux g.
Sent from my LG-P925g using xda premium
Thank you! I had tried the modify flex.xml post and was met with force close errors. I experienced fauxG when I enabled flex as well. I know that it is different for everyone, so take this with a grain of salt, but my speeds were back to where they were out of the box when I followed this method. For me, that meant my speeds were doubled compared to when I used Flex.
As to the method to change flex.xml, I got a file explorer from the market specifically for rooted phones. Found the flex.xml file, edited the permissions and then edited the file per the post. Then I rebooted and lo and behold, it said 4g, but that was simply not the case in terms of the speeds I experienced.
The OP is a method for USA users that worked for me to get my full 4g working again. I also tested that with netspeed (i realize it is flawed, but that's what I use).
Let us know when you start missing calls and texts.
TylDurden said:
Let us know when you start missing calls and texts.
Click to expand...
Click to collapse
How would you know if you missed a call or text?
Sent from my LG-P925g using xda premium
TylDurden said:
Let us know when you start missing calls and texts.
Click to expand...
Click to collapse
Ghosting is not a known issue on v20c. Can you specify?
A lot of people are experiencing ghost calls on v20c and I'm willing to bet that those who think they aren't don't realize when they do. I tried everything and still got ghost calls and missed texts. My wife would call my office and ask why I'm not answering my cell phone.
Oh yes. Durden - I remember your post. You are referencing, I believe
this thread
or
here
The majority of the complaints tend to center around using roms that were not in some way stock. This puts your phone out in stock Rogers, which I can't find any explicit issues with. I haven't put that in there because what you do with your phone after you flash is isn't covered in the post. I'm describing the method and providing the links, as stated in the OP.
The other type of complaint is from people using some form of 21. The posts I link to also have downgrade explanations. While there are several complaints, there are many happy folks. Here as well.
Interesting, thanks for the guide. I'll give this a try in a few days.
No problem. I posted this in general so everyone could take a look. I posted my findings in the OP - let us know yours so we can edit the guide for readability if need be.
kfdenden said:
The majority of the complaints tend to center around using roms that were not in some way stock. This puts your phone out in stock Rogers, which I can't find any explicit issues with. I haven't put that in there because what you do with your phone after you flash is isn't covered in the post. I'm describing the method and providing the links, as stated in the OP.
Click to expand...
Click to collapse
I never rooted my phone or flashed anything but stock KDZs. No matter which one I tried I always got ghost calls. Most of the articles and public complaints come from others on stock GB especially since root for v20c has only been around for a week or so. This is a really good tutorial (albeit found a couple other places), it's what I did back when Rogers first released GB and I posted my own little tutorial. I honestly hope you guys don't miss any calls. I'm tempted to even try it again cause Froyo is slow as hell and freezes up on me a ton but at least I'm not missing any calls or texts. I would be very interested in hearing from all of you after several days. It seems like I went a couple weeks on Rogers GB before I realized how bad of an issue I was having.
BTW when you said "Hold Vol Down+3D+Power to get the recovery menu and wipe everything one by one" did you mean all of these?
wipe data/factory reset
wipe cache partition
wipe cache partition and package recovery
clear nv dynamic partition
I have been running v20c for almost two weeks and can assure you I am not getting any ghosting. How do I know? I use youmail, and get e-mails when I miss calls and/or get voicemails. All the missed calls I see in youmail are also on my phone as missed calls-usually happening while I am asleep. Seems pretty solid. As for my APN, I only set mine up for data as I could care less about MMS. My APN setup is
Name-ATT HSDPA
APN-phone
The rest are left blank.
Speedtest.net app confirms my data speeds run comparable to my SGS2 Skyrocket speeds (to be fair, I live in an area with 3G, and no HSDPA or 4G LTE as of yet). So all in all, I am very pleased with the Rogers v20c on my AT&T LG Thrill. Lord knows AT&T is never going to get around to releasing an official GB for it. As far as official releases go, you are probably more likely to see ICS before GB. Although, both are probably just pipe dreams. Thank goodness for XDA devs.
I use youmail too. Sometimes the person calling me got my voicemail. Sometimes they got "the subscriber you are calling is unavailable"
Thanks for this writeup, I followed it to flash over the Rogers gingerbread from the European open one. The only thing I did different is use drivers from Adixtra's writeup for the KDZ, for some reason the ones you provided wouldn't recognize the phone correctly. All I can say is wow, I totally forgot how nice it is to have the 850 MHz band lol. I never get less than 3 bars now, while the European one I would barely get the 3G/4G signal most places and would be flaky even on the EDGE network. And just a note to all the people confused about the whole "4G" speeds thing on different basebands: The only thing different about the European baseband is that you lose the 850 MHz band. From my experience, it provided the same 3G/4G speeds whether I was on the North American baseband or the European one, the only difference was in the coverage. But losing the 850 MHz band sucks, that's the one that penetrates buildings better I think.
good news i got everything downloaded and ready to follow the next step and http://smallsrv.com/ is down. what now
Yes I did. @TylDurden Wipe them individually.
-Epix- said:
good news i got everything downloaded and ready to follow the next step and http://smallsrv.com/ is down. what now
Click to expand...
Click to collapse
It is up and running. Having trouble?
lg_haters_make_me_lol said:
Thanks for this writeup, I followed it to flash over the Rogers gingerbread from the European open one. The only thing I did different is use drivers from Adixtra's writeup for the KDZ, for some reason the ones you provided wouldn't recognize the phone correctly. All I can say is wow, I totally forgot how nice it is to have the 850 MHz band lol. I never get less than 3 bars now, while the European one I would barely get the 3G/4G signal most places and would be flaky even on the EDGE network. And just a note to all the people confused about the whole "4G" speeds thing on different basebands: The only thing different about the European baseband is that you lose the 850 MHz band. From my experience, it provided the same 3G/4G speeds whether I was on the North American baseband or the European one, the only difference was in the coverage. But losing the 850 MHz band sucks, that's the one that penetrates buildings better I think.
Click to expand...
Click to collapse
NP - that was a biggie for me too. I am glad you found a working driver. No one has really been able to isolate the ghosting issue, although it has been demonstrated that it is not a hardware issue. I would recommend using the driver provided to standardize the results of this writeup, though, for the others who are looking to give it a shot.
TylDurden said:
I use youmail too. Sometimes the person calling me got my voicemail. Sometimes they got "the subscriber you are calling is unavailable"
Click to expand...
Click to collapse
I am using Google Voice (free). I have used youmail in the past and it became apparent that if I wanted transcribed voicemail for free, I would need to go to Google. I really liked the youmail features though.
can i use v21D_00 instead of V20?
Related
Does anyone know if XDA developers have any intent to create an app that would allow us to force the HTC Hero (CDMA for Sprint), and future Sprint Android phones, to roam? Service is weak in my office and I would love to force it to roam.
Thanks!
Would love to have the ability to force roam.
I would love to have the ability to force roam. Sounds like I'm in the same boat. At work i get like 1/2 bar of reception, while my roaming reception is full bars. My centro had the ability to force it to roam which really saved me but my hero doesn't. I would love if an app made this possible with maybe a toggle switch widget. Not sure if you would need root access for this or not. Could someone elighten us as to whether or not this can be done and if someone is already looking into the issue?
totally on the same boat. this is a must have.
it was done easily on my sprint touch on winmo =/
I would love this ability as well.
^^ Bump ^^
Same problem here!
Same here...while I don't know anything about rooting, I would imagine it wouldn't be that difficult for someone with some skill to allow roam only if it was a setting originally there and disabled before release..
Had this for my Pre. Definately would make my Hero much more usable. I actually believe my battery would last over a day if someone could create this.
Ok, we need to bump this thread. I just switched from my Q9c that had full signal while roaming at my
house (otherwise, no service from sprint). I got my Hero yesterday, and I can't get service PERIOD. I
am willing to pay, and so are a lot of others, for an app for the Hero to force roam. Willing to pay damn good money here.
PLEASE, someone chime in on this.
Yes I need this app I would so pay for this I only need it at my home and I'm paying for air rave bump bump bump
Someone seems to be trying http://www.mail-archive.com/[email protected]/msg16197.html
I have noticed something.......if I turn on wifi in my home rather than use the data it finds roaming network 50% less. If I leave an app running that consistently taps the data which can be expensive unless you have unlimited it seems to hold the roaming signal in place until the data connection goes dormant.
bump?Anything?
Bumpity bump. This is the only thing stopping me from getting a Hero (or another Android phone).
I am honestly shocked noone has come up with this yet. This is definately one instance where Android fails. Im bout ready to jump ship to big red.
pahick said:
I am honestly shocked noone has come up with this yet. This is definately one instance where Android fails. Im bout ready to jump ship to big red.
Click to expand...
Click to collapse
I'm surprised as well. I think I'm going to get the Pre for now, and if there is ever a fix for this, then I'll move over to an Android phone. I'd like to contribute to a solution, but unfortunately time is hard to come by (the same I'm sure for many people).
I upgraded to Android and love it but hate the no forced roaming crap so I had to trade my other phones for a TP2 but I can't activate it until I get my stupid $100 MIR back from Sprint. So I suffer....
V.A.T.Juice said:
Someone seems to be trying http://www.mail-archive.com/[email protected]/msg16197.html
I have noticed something.......if I turn on wifi in my home rather than use the data it finds roaming network 50% less. If I leave an app running that consistently taps the data which can be expensive unless you have unlimited it seems to hold the roaming signal in place until the data connection goes dormant.
Click to expand...
Click to collapse
So the link you provided above...is guy that barking up the wrong tree?
Alright folks..I think i may have stumbled upon a workaround to force roaming!!
Procedure:
1. Download and install the diagnostics drivers for the Hero
2. Download the latest version of QPST (i'm using 2.7 build 323)
3. On your phone make sure USB debugging is turned on and push ##3424# in your phone keypad
4. Plug your phone in via USB and install the diagnostics drivers when prompted
5. If you've installed the drivers correctly, you should be able to go to Device Manager in control panel and see it registered as a COM port/USB diagnostic device
6. Next open QPST Service Programming>Connection>New. You should see your phone/COM port and you obviously choose that.
7. Choose "Read from phone" in the lower left hand of the window, after which you'll be prompted for your service programming code/MSL (Google your way to find it if you don't already have it)
8. Whence you have entered that code you'll see your phone info around
9. Go to the System tab (5th tab in my setup)
10. NOW..what worked for me was this setup: Preferred Mode: Digital Only (upon further investigation, apparently "Automatic" works as well) Band Preference: A Only (as a side note B Only worked for me as well) Roam Preference: Automatic
11. Press Write to Phone
12. Reboot your phone
That should do it!! If alls done right you should see the familiar Roam triangle over your service bars! Hope it works fer ya..to change back from roaming only change everything back to Automatic.
*DISCLAIMER*: I've been messing around with my phone's service programming quite a bit so this may only work for me cuz of some erroneous change I made to the internals. Also I've only tried this in an area that I know I can get signal at, so whether it is TRULY roaming, I don't know. All I do know is that it says Roaming in my phone's Status
KERKEDAGAIN said:
Alright folks..I think i may have stumbled upon a workaround to force roaming!!
Procedure:
1. Download and install the diagnostics drivers for the Hero
2. Download the latest version of QPST (i'm using 2.7 build 323)
3. On your phone make sure USB debugging is turned on and push ##3424# in your phone keypad
4. Plug your phone in via USB and install the diagnostics drivers when prompted
5. If you've installed the drivers correctly, you should be able to go to Device Manager in control panel and see it registered as a COM port/USB diagnostic device
6. Next open QPST Service Programming>Connection>New. You should see your phone/COM port and you obviously choose that.
7. Choose "Read from phone" in the lower left hand of the window, after which you'll be prompted for your service programming code/MSL (Google your way to find it if you don't already have it)
8. Whence you have entered that code you'll see your phone info around
9. Go to the System tab (5th tab in my setup)
10. NOW..what worked for me was this setup: Preferred Mode: Digital Only (upon further investigation, apparently "Automatic" works as well) Band Preference: A Only (as a side note B Only worked for me as well) Roam Preference: Automatic
11. Press Write to Phone
12. Reboot your phone
That should do it!! If alls done right you should see the familiar Roam triangle over your service bars! Hope it works fer ya..to change back from roaming only change everything back to Automatic.
*DISCLAIMER*: I've been messing around with my phone's service programming quite a bit so this may only work for me cuz of some erroneous change I made to the internals. Also I've only tried this in an area that I know I can get signal at, so whether it is TRULY roaming, I don't know. All I do know is that it says Roaming in my phone's Status
Click to expand...
Click to collapse
Has anyone tried this yet? I don't have my cable available now to do so myself, but hopefully I can get it this weekend.
links
links please.....
my phone boots and runs android beautifully but my data connection does not work at all
also my wifi is not working.
anytips?
I have the same Problem
I have the same problem. I found a Link to android where the wifi is working
1111www mega up load. com/?d=Y1VDY673 (without spaces and without the ones)
Let me know when you get data to work. thanks
thanks that link is SUPER slow on my comp, but imma let it go
i have no idea how to get data, i think it is a problem with the apn settings and i cannot find any of that information for cellular south
does anybody hav access to cell south apn data, i think that may be wats wrong because the fone says it has "3G" and the up arrow flashes but the down does not and it goes no where
Phone Number is #777
User Name: [email protected]
This user name is usually the same as your phone number.
PassWord: (ESN Hex number in all caps)
Note: ESN = MEID for CSouth Touch Diamond. You can find it behind the battery.
That's the settings for setting up in WM. I'm currently trying to figure out Android myself. I'll post my results.
Edit: Alright, I figured it out.
Create a new APN with the home key.
In server, put #777. The rest is the above information.
did that fix work?
ok this still did nothing for my diamond, what build and kernel and stuff were you using?
Nothing happen to my phone either
i am about to throw my diam500 out the window, ever since i started tinkering with android, it has NOT worked at all, to top it off, it will not sync with active sync or mount as a disk, i want OUT i want REAL android i hate winmo rite now plus my rom sucks, its slow freezes all the time and the sad part is that its the best one ive tried
Lol, Try the gtx fearless rom on ppc greeks website. just google roms for cdma htc diamond.
I'm sorry for not responding, but I seemed to have it working at first. After a soft reset, it seemed to have stopped. Right now, I'm trying to determine another way using other threads I've found across the internet.
I'll try to find a fix, if I can.
Edit: Updating to the latest rootfs, zimage, etc.. Fixed the data problem for me. The APN I have set up is called "Android", APN is "Internet", and APN Type "Default".
Also, make sure you have "msmvkeyb_toggle=off" in your cmdline area of startup.txt or else you have an annoying keyboard that won't go away on the top of the screen. I had this bug during my first turn on with update, but I put this in before booting Droid again, so it may have gone away on its own.
Awesome
Edit: Updating to the latest rootfs, zimage, etc.. Fixed the data problem for me. The APN I have set up is called "Android", APN is "Internet", and APN Type "Default".
Also, make sure you have "msmvkeyb_toggle=off" in your cmdline area of startup.txt
Awesome, Its actually working. Thanks
Another thing I'd like to add, is that you MAY have to enter Airplane mode, then exit.
Definitely working for me 100% now, though.
anyone having the problem of the charge light working in reverse of what its suppose to?
my charge light pulses when the phone is not charging and is off when the phone is charging. I wasn't sure if this was a cellular south problem or an overall problem.....or if I screwed something up
Hello everyone. As you may guess from the topic title, I'm having a rather serious issue - my Captivate is no longer connecting to 3G or even to Edge - though it connects to Wi-Fi just fine.
It all started about a week ago, but has since progressed to a frustrating degree.
Basically, I was running Cognition 3.03, and everything was going fine - and then after hitting Flight Mode, I couldn't reactivate my data connections. I'd reboot the phone, and I'd be able to connect for about a minute or so after booting, and then Flight Mode would re-enable by itself; needless to say, it was very frustrating.
After looking around the Internet for some help, I eventually flashed what I presume is supposedly a stock rom - specifically I897UCKB1 - and thus we get to my current issue - no 3G access at all, no Edge, though I can still make and receive calls and send and receive text messages.
I guess it should be mentioned that I've had the phone about a year and a half (got it in November 2010, and therefore not up for a new phone until then), and generally put it to heavy use data-wise.
I had read somewhere that it might be an issue with my SIM card, but switching SIM cards with my dad did not solve the problem at all.
Could it be a problem with the modem or whatever that connects with the 3G network?
Thanks for your help (and for reading all of that!)
yurklenorf
It does sound like you're having a modem issue. The easiest way to correct this would be to go to the Modems thread at the top of the Development section and find a modem that works with your ROM (KB1). Flash that from recovery and see if it fixes it.
If not, you may need to flash back to stock and re-flash Cognition.
Also, check your apn settings. There's an option to reset to default. Try that.
jmtheiss said:
It does sound like you're having a modem issue. The easiest way to correct this would be to go to the Modems thread at the top of the Development section and find a modem that works with your ROM (KB1). Flash that from recovery and see if it fixes it.
If not, you may need to flash back to stock and re-flash Cognition.
Click to expand...
Click to collapse
Sorry it took so long to reply - my home Internet access is... not good, so I have to go into the public library to do anything for the time being.
Anyway, my phone was being unruly and wouldn't let me do anything last night after I downloaded the modem that's supposed to work with my ROM - I couldn't even root it for whatever reason. I'm in the middle of downloading the supposedly official stock Gingerbread ROM (KK4) and I'm going to try from there later tonight.
mrhaley30705 said:
Also, check your apn settings. There's an option to reset to default. Try that.
Click to expand...
Click to collapse
Unfortunately I don't see anything about that. I go Settings > Wireless and network > Mobile Network, see Access Point Names, and it says it's empty and asks if I want to add an APN. I have no idea about what to do with that, so I'm not going to try right now.
yurklenorf said:
Sorry it took so long to reply - my home Internet access is... not good, so I have to go into the public library to do anything for the time being.
Anyway, my phone was being unruly and wouldn't let me do anything last night after I downloaded the modem that's supposed to work with my ROM - I couldn't even root it for whatever reason. I'm in the middle of downloading the supposedly official stock Gingerbread ROM (KK4) and I'm going to try from there later tonight.
Unfortunately I don't see anything about that. I go Settings > Wireless and network > Mobile Network, see Access Point Names, and it says it's empty and asks if I want to add an APN. I have no idea about what to do with that, so I'm not going to try right now.
Click to expand...
Click to collapse
once you Get to the screen asking if you want to add an apn, hit menu. One of the options should be reset to default. If you have no apn, that would explain why you have no 3g, etc.
mrhaley30705 said:
once you Get to the screen asking if you want to add an apn, hit menu. One of the options should be reset to default. If you have no apn, that would explain why you have no 3g, etc.
Click to expand...
Click to collapse
Thanks for the quick reply.
When I go into Settings > Wireless and network > Mobile networks, it brings up a list of four items
-Use packet data (with the checkmark)
-Data roaming (with a checkmark, unchecked)
-Access Point Names
-Network Operators.
Clicking Access Point Names brings up a notification box APN Empty: Add an APN? Ok/Cancel. Hit OK, and it brings up a list of things for me to type in - hit menu and it only brings up Save and Discard. Hit Cancel, and it takes me back to the previously listed four items.
Clicking Network Operators shows Default Setup, but it's grayed out, and pressing the menu button does nothing.
Sorry for double post, but good news!
I flashed the 2.3.5 ROM I mentioned above, and it all works now!
Sent from my SAMSUNG-SGH-I897 using XDA
Hey, everyone.
I just bought an ATT Samsung Focus S i937 off of eBay. It was locked when I received it, so I plunked down 25 bucks and unlocked it. I'm using it on Telus and so far all is well, except for WiFi connection sharing/tethering.
When I try to enable internet sharing, I get a message saying "Connection not shared. To enable tethering on this device go to (ATT's website) or dial 611."
Basically, it sounds like I need to have an ATT tethering plan to enable this on my phone, but since I'm not an ATT customer, there's not mch I can do.
I was wondering if there is a workaround for this. Please let me know!
Thanks,
Taylor
TaylorofCanada said:
Hey, everyone.
I just bought an ATT Samsung Focus S i937 off of eBay. It was locked when I received it, so I plunked down 25 bucks and unlocked it. I'm using it on Telus and so far all is well, except for WiFi connection sharing/tethering.
When I try to enable internet sharing, I get a message saying "Connection not shared. To enable tethering on this device go to (ATT's website) or dial 611."
Basically, it sounds like I need to have an ATT tethering plan to enable this on my phone, but since I'm not an ATT customer, there's not mch I can do.
I was wondering if there is a workaround for this. Please let me know!
Thanks,
Taylor
Click to expand...
Click to collapse
firstly DO NOT INSTALL THE SAMSUNG UPDATE!! and if updating the OSan have it unlocked already read This Website and use the relock prevent + edit your hosts file
Absolutely back up your device at every stage using This Guide
So follow these steps
unlock the device Here follow the instructions which includes installing the diagnostic tool and install XAP deployer or XAP handler Here or Here With the XAP file deployer in the WP7 SDK
Then install WP7 Root Tools Here
Then install WP Bazaar market Here
Open Root Tools, and give Bazaar higher level privileges
Find WinTT on the Bazaar market and install it
Open Root Tools, and give WinTT higher level privileges
you may need to restart to get WinTT working
go through WinTT and turn on ICS
Done
Wow thanks.
That's very complete. One questions though... I didn't mention this, but I am a registered WP7 dev and can unlock this device using my dev access. Can I load any of the XAPs directly instead of having to crack my phone?
Thanks,
Taylor
Yeah, you have limited access to installing xaps, but you will still need to interop unlock and use root tools to give higher level access to WinTT, so your best starting from scratch,
Sent from my SGH-i937 using XDA Windows Phone 7 App
Unable to understand the process
I have purchased an Samsung Focus S i937 locked to AT&T. I have purchased an unlock code and have successfully unlocked my phone. Im also unable to use the Internet Sharing feature of my phone. Firstly, I am not a technical guy hence im unable to understand the process stated by you. Secondly, I wanted to find out that does following the process given by you, expose my device to get BRICKED as I am able to understand that involved a JAIL BREAK of the device. Does it have any other side effects.? Like effecting the radio signals or any other such problem.
Thanks
abhijeetmohan06 said:
I have purchased an Samsung Focus S i937 locked to AT&T. I have purchased an unlock code and have successfully unlocked my phone. Im also unable to use the Internet Sharing feature of my phone. Firstly, I am not a technical guy hence im unable to understand the process stated by you. Secondly, I wanted to find out that does following the process given by you, expose my device to get BRICKED as I am able to understand that involved a JAIL BREAK of the device. Does it have any other side effects.? Like effecting the radio signals or any other such problem.
Thanks
Click to expand...
Click to collapse
ok, first things first.
You won't brick your device, at worst a hardrest all remove all changes you can do, our device, the focus S, isn't fully unlocked, so there are limitations to the amount of damage you can do by arseing it up. With that behind us you have to learn what you are about to do, there isn't a simple way.
So, start by knowing these basics, then read through the guide, any bits you don't understand feel free to ask.
1, AT&T locked your internet connection sharing, so you must re enable that
2, To enable ICS, you must make changes to the registry
3, Microsoft locked you out of making changes to the registry, so you must gain access to do it
4, AT&T left a security hole allowing us to make changes to allow us to change things like registry
5, using that hole we can install software that will give us more access, that software can then allow us to remove the AT&T lock on ics
These things you must do, there is no magic answer, there has been some short cuts made but this in some cases has had a negative effect, such as losing 3g, doing as I said will not have any effect on your signal or anything else
Sent from my Samsung Focus S using XDA Windows Phone 7 App
Have you guys noticed any of the following....
issues after the above procedures were applied (a big thanks to all the brainiacs who know how to hack this stuff):
Slowed Internet Connection
Lower Strength of GPS Signal
Less accuracy and trouble sometime finding location
Less accuracy while using maps because of the above statement
Not complaining, just curious. Thanks to all.:good:
7carisfast said:
issues after the above procedures were applied (a big thanks to all the brainiacs who know how to hack this stuff):
Slowed Internet Connection
Lower Strength of GPS Signal
Less accuracy and trouble sometime finding location
Less accuracy while using maps because of the above statement
Not complaining, just curious. Thanks to all.:good:
Click to expand...
Click to collapse
theres nothing in the code that should have done that, the XML import only fiddles with interop unlock
im not 100% sure what WTT changes but I know the entries it should be fiddling with and shouldnt make any difference, although its been suggested the ICS code does mess with the 3G signal ive not heard anything at all to suggest that it effects GPS as well.
See This Thread for details, ive copied the relevant bits here but all thanks should go to those on the original thread
Option 1
---- 11.3. If your device is not locked to a specific operator, you can use the Samsung Network Profile app (for 1st generation) or Wireless Manager (for 2nd generation)
-------- 11.3.1. Uninstall the Samsung Network Profile / Wireless Manager app.
-------- 11.3.2. Download and install the latest version of the Samsung Network Profile / Wireless Manager app from the Marketplace.
-------- 11.3.3. Open the Samsung Network Profile / Wireless Manager app.
-------- 11.3.4. Select a different Network Operator.
-------- 11.3.5. Now Select your own Network Operator again.
-------- 11.3.6. Exit the Network Profile / Wireless Manager app.
Option 2
Resolve Samsung connection problems
A lot of Samsung owners have complained here about connection problems. They blamed Interop Unlock, but apparently this has more to do with enabling "Internet Connection Sharing" than with "Interop Unlock". You should be able to recover the connection, apply this:
1. Start Diagnosis App> *#32489# ***DOES NOT WORK ON i937***
2. Tap "Back" 2 times to go back to Phone Control
3. Choose: [7] Network Control
4. Choose: [1] GFC
5. Choose: [3] Setting Cancellation
Wait for it to say success, then reboot.
GPS is a completely passive function, I don't have a problem with this, HSDPA may have issues for reasons unknown but using this method doesn't effect mine, perhaps its carrier specific..
dazza9075 said:
theres nothing in the code that should have done that, the XML import only fiddles with interop unlock
im not 100% sure what WTT changes but I know the entries it should be fiddling with and shouldnt make any difference, although its been suggested the ICS code does mess with the 3G signal ive not heard anything at all to suggest that it effects GPS as well.
See This Thread for details, ive copied the relevant bits here but all thanks should go to those on the original thread
Option 1
---- 11.3. If your device is not locked to a specific operator, you can use the Samsung Network Profile app (for 1st generation) or Wireless Manager (for 2nd generation)
-------- 11.3.1. Uninstall the Samsung Network Profile / Wireless Manager app.
-------- 11.3.2. Download and install the latest version of the Samsung Network Profile / Wireless Manager app from the Marketplace.
-------- 11.3.3. Open the Samsung Network Profile / Wireless Manager app.
-------- 11.3.4. Select a different Network Operator.
-------- 11.3.5. Now Select your own Network Operator again.
-------- 11.3.6. Exit the Network Profile / Wireless Manager app.
Option 2
Resolve Samsung connection problems
A lot of Samsung owners have complained here about connection problems. They blamed Interop Unlock, but apparently this has more to do with enabling "Internet Connection Sharing" than with "Interop Unlock". You should be able to recover the connection, apply this:
1. Start Diagnosis App> *#32489#
2. Tap "Back" 2 times to go back to Phone Control
3. Choose: [7] Network Control
4. Choose: [1] GFC
5. Choose: [3] Setting Cancellation
Wait for it to say success, then reboot.
GPS is a completely passive function, I don't have a problem with this, HSDPA may have issues for reasons unknown but using this method doesn't effect mine, perhaps its carrier specific..
Click to expand...
Click to collapse
Thanks for the info. I'll see if it helps. Just as FYI, the code *#32489# does not appear to work on the i937.
7carisfast said:
Thanks for the info. I'll see if it helps. Just as FYI, the code *#32489# does not appear to work on the i937.
Click to expand...
Click to collapse
indeed, so it would seem, many of the diagnostic codes have been disabled which is a pain, even the ones that are left don't always do what you expect them to do
8773 update
dazza9075 said:
firstly DO NOT INSTALL THE SAMSUNG UPDATE!! and if updating the OSan have it unlocked already read This Website and use the relock prevent + edit your hosts file
Absolutely back up your device at every stage using This Guide
So follow these steps
unlock the device Here follow the instructions which includes installing the diagnostic tool and install XAP deployer or XAP handler Here or Here With the XAP file deployer in the WP7 SDK
Then install WP7 Root Tools Here
Then install WP Bazaar market Here
Open Root Tools, and give Bazaar higher level privileges
Find WinTT on the Bazaar market and install it
Open Root Tools, and give WinTT higher level privileges
you may need to restart to get WinTT working
go through WinTT and turn on ICS
Done
Click to expand...
Click to collapse
What if I have already updated to version 7.10.8773.98, is there any other possible way? I don't need any other features. Thanks in advance.
If you have updated the OS and NOT the samsung firmware then reapply the windows break interop unlock, be sure to keep it off the inernet by disabling all coms and then apply the relock prevent xap. if you have applied the Samsung firmware and didn't have it already unlocked or you didn't have a back up, your screwed
Sent from my Samsung Focus S using XDA Windows Phone 7 App
dazza9075 said:
If you have updated the OS and NOT the samsung firmware then reapply the windows break interop unlock, be sure to keep it off the inernet by disabling all coms and then apply the relock prevent xap. if you have applied the Samsung firmware and didn't have it already unlocked or you didn't have a back up, your screwed
Sent from my Samsung Focus S using XDA Windows Phone 7 App
Click to expand...
Click to collapse
First of all I just want to say thanks that you're trying to help me, but I just didn't understand many things u said, I'm not really into technical stuff, but I'll tell you what info I have, in hope of u helping me better.
I don't live in the US and I bought the phone from ebay and it was unlocked and it works perfectly over 2 carriers here in my country, and I have never encountered any problems with it except for the internet sharing feature.
And about 3 months ago the phone notified my to a system upgrade from version 7.10.7740 to version 7.10.8107 then immediatly to version 7.10.8773.98. now I'm guessing these are OS firmwares not samsung software.
but I've noticed something, when I setup my phone for the first time I used a US hotmail account but before I connect to the internet the ICS feature worked, but once I signed in it gave me the dial 611 or go to att.com/mywireless message.
So I am guessing if I restore the device and sign in with a non US hotmail account may result in the feature to be unlocked. The only thing keeping me from trying this because I'll have to redownload all my apps again and reorganize my contacts again. if there's a way to avoid that or someone has tried it please do tell.
Again thanks for your reply.
kholio88 said:
First of all I just want to say thanks that you're trying to help me, but I just didn't understand many things u said, I'm not really into technical stuff, but I'll tell you what info I have, in hope of u helping me better.
I don't live in the US and I bought the phone from ebay and it was unlocked and it works perfectly over 2 carriers here in my country, and I have never encountered any problems with it except for the internet sharing feature.
And about 3 months ago the phone notified my to a system upgrade from version 7.10.7740 to version 7.10.8107 then immediatly to version 7.10.8773.98. now I'm guessing these are OS firmwares not samsung software.
but I've noticed something, when I setup my phone for the first time I used a US hotmail account but before I connect to the internet the ICS feature worked, but once I signed in it gave me the dial 611 or go to att.com/mywireless message.
So I am guessing if I restore the device and sign in with a non US hotmail account may result in the feature to be unlocked. The only thing keeping me from trying this because I'll have to redownload all my apps again and reorganize my contacts again. if there's a way to avoid that or someone has tried it please do tell.
Again thanks for your reply.
Click to expand...
Click to collapse
ok, no problem
can you go to your device settings, in the about section can you tell me your OS version and your firmware version
Samsung Firware Update
dazza9075 said:
ok, no problem
can you go to your device settings, in the about section can you tell me your OS version and your firmware version
Click to expand...
Click to collapse
Dazza,
Kudos for your help as you personally worked with me through this information. Not sure the Samsung update is a concern as I'm running fw2103.11.10.1 and everything works great.
Thanks again.
dazza9075 said:
ok, no problem
can you go to your device settings, in the about section can you tell me your OS version and your firmware version
Click to expand...
Click to collapse
OS version: 7.10.8773.98
Firmware version: 2103.12.05.2
kholio88 said:
OS version: 7.10.8773.98
Firmware version: 2103.12.05.2
Click to expand...
Click to collapse
im afraid to say your firmware is locked,
2103.11.10.1 is unlock-able, im pretty sure anything from xxxx.12.xx.x upwards is locked down solid
I don't suppose you made a backup? if you haven't then there is nothing you can do
the Samsung firmware update was released as a separate update at the same time as the tango 8773 build, it tried to install on mine after the 8773 build
Found a solution =D
dazza9075 said:
im afraid to say your firmware is locked,
2103.11.10.1 is unlock-able, im pretty sure anything from xxxx.12.xx.x upwards is locked down solid
I don't suppose you made a backup? if you haven't then there is nothing you can do
the Samsung firmware update was released as a separate update at the same time as the tango 8773 build, it tried to install on mine after the 8773 build
Click to expand...
Click to collapse
I'm really sorry for the late reply, was busy at work. but during that time I might have found a "Glitch" or a workaround to enable it and I have tested it many times and it works.
Well there are two ways:
1st one which is a sure thing:
1) Turn off the phone, then turn on again.
2) Once the phone is turned on, immediately go to settings>internet sharing and turn it on and BOOM there you go :laugh:
* I have tried this method over a dozen times and it works every single time
** The point here is that you have to enable it immediately after the phone is turned on, I think it happens because the phone doesn't have enough time to send the info. to the servers to know that it's not enabled by default.
2nd one which was succesful over 75% of the time:
1) Go to Settings>cellular>Turn Off, Wait like 5-10 seconds and turn on again.
2) Go to Internet sharing> Turn on, and enjoy :fingers-crossed:
***I don't know why do they work or how, may be it's a Glitch like I said before but the point is they do work
I hope that I've helped someone out there and Thanks to everyone who tried to help me
kholio88 said:
I'm really sorry for the late reply, was busy at work. but during that time I might have found a "Glitch" or a workaround to enable it and I have tested it many times and it works.
Well there are two ways:
1st one which is a sure thing:
1) Turn off the phone, then turn on again.
2) Once the phone is turned on, immediately go to settings>internet sharing and turn it on and BOOM there you go :laugh:
* I have tried this method over a dozen times and it works every single time
** The point here is that you have to enable it immediately after the phone is turned on, I think it happens because the phone doesn't have enough time to send the info. to the servers to know that it's not enabled by default.
2nd one which was succesful over 75% of the time:
1) Go to Settings>cellular>Turn Off, Wait like 5-10 seconds and turn on again.
2) Go to Internet sharing> Turn on, and enjoy :fingers-crossed:
***I don't know why do they work or how, may be it's a Glitch like I said before but the point is they do work
I hope that I've helped someone out there and Thanks to everyone who tried to help me
Click to expand...
Click to collapse
nice find, ICS is disabled locally only, it doesn't have anything to send, the only thing I can think of that makes sense is that the service hasn't been initialised and doesn't call the reg entries that disables ICS, by turning it on manually ASAP it perhaps catches it out. if you enable it, then disable it, can you still enable it again in that session or do you need to restart?
dazza9075 said:
nice find, ICS is disabled locally only, it doesn't have anything to send, the only thing I can think of that makes sense is that the service hasn't been initialised and doesn't call the reg entries that disables ICS, by turning it on manually ASAP it perhaps catches it out. if you enable it, then disable it, can you still enable it again in that session or do you need to restart?
Click to expand...
Click to collapse
Well I tried that, but there is no definite answer to it, sometimes I turn it on and off on and off many times without needing to restart and throughout the whole day, and sometimes it works once and doesn't at the second try. So it all comes down to luck, but still better than nothing
Now the thing is I'm afraid that when the 7.8 update comes, they would fix this glitch =D Haha.
I'm trying to get Straight Talk working with this Bionic. Could someone help?
Not sure but...
I used to be a Verizon Wireless agent (Straight Talk piggy backs on their network.) If I remember right straight talk/net10/verizon's own prepaid phones are limited to 3G devices only. Policies may have changed, or I could potentially be wrong but I am going to guess that you won't be able to get it working on their network because they won't be able to issue you a compatible SIM
You have to edit the build.prop and create a local.prop (it probably doesn't exist). I recently put SlimKat 4.4.4 on my friend's Bionic, and got it working well with Straight Talk (Voice, MMS, Data, etc). Just edit build.prop with:
persist.radio.ap.phonetype=1
ro.mot.phonemode.vzw4gphone=0
ro.mot.phonemode.vzwglobalphone=1
ro.telephony.default_network=3
ro.telephony.gsm-routes-us-smsc=0
telephony.lteOnCdmaDevice=0
Create a local.prop file and add:
ro.telephony.ril.v3=signalstrength
Move this into /data/
Next, go into system/etc/ and get your apns-conf.xml file and delete all the entries you don't need, keeping only the one relevant to Straight Talk. In my friend's case:
Code:
<apns version="7">
<apn carrier="StraightTalk ATT" mcc="310" mnc="410" apn="tfdata" port="80" mmsc="http://mms-tf.net" mmsproxy="mms3.tracfone.com" mmsport="80" type="default,supl,mms,hipri" />
</apns>
For the novices, to do this last part, you'll need a file manager like ES that can utilize root permissions after enabling in settings.
After this, any 4.3 or 4.4 ROM should let you edit APN settings, etc. You may need to set your radio to GSM (auto PRL) by going into your dialer and hitting *#*#4636#*#* and going into Phone Information then down to network type or whatever. I don't have a Motorola phone in front of me If that doesn't work, I've noticed GSM/WCDMA (auto PRL) works for some.
Good luck
Edit: I forgot one crucial thing you must do. You have to use RadioComm to enable GSM/UMTS bands. You can find it with Google. The version I used is 11.12.2. You'll either have a green or purple light on the right side, signifying that your phone is connected. It should show up in the status bar too. Steps:
Ensure you have correct Motorola drivers and that device shows up in device manager (You may need to use Google USB driver, as this has worked with some Motorola phones for me)
Ensure that USB is in PC Tools mode
In Radiocomm go to MA->COMMON->MDM 6x00
Go to the FTM Common1 tab, and wait for purple or green light on side
Toward the top of NVAccess you'll see a select box. Scroll to NV item 1877 NV_RF_BC_CONFIG_I
Click on read value
Once read, replace the first 8 bytes with: 8703E80400000200 (back up original as a .txt file or something)
Write the new value to the device and reboot
There's also a flashable zip that does this, but I've not tested it. Use at your own risk:
http://forum.xda-developers.com/attachment.php?attachmentid=1048524&d=1336485537
All of the information I presented is from others, but I can't remember all the threads I got this from. I take no responsibility for any bricked phones or the like.
shadolis said:
You have to edit the build.prop and create a local.prop (it probably doesn't exist). I recently put SlimKat 4.4.4 on my friend's Bionic, and got it working well with Straight Talk (Voice, MMS, Data, etc). Just edit build.prop with:
persist.radio.ap.phonetype=1
ro.mot.phonemode.vzw4gphone=0
ro.mot.phonemode.vzwglobalphone=1
ro.telephony.default_network=3
ro.telephony.gsm-routes-us-smsc=0
telephony.lteOnCdmaDevice=0
Create a local.prop file and add:
ro.telephony.ril.v3=signalstrength
Move this into /data/
Next, go into system/etc/ and get your apns-conf.xml file and delete all the entries you don't need, keeping only the one relevant to Straight Talk. In my friend's case:
Code:
<apns version="7">
<apn carrier="StraightTalk ATT" mcc="310" mnc="410" apn="tfdata" port="80" mmsc="http://mms-tf.net" mmsproxy="mms3.tracfone.com" mmsport="80" type="default,supl,mms,hipri" />
</apns>
For the novices, to do this last part, you'll need a file manager like ES that can utilize root permissions after enabling in settings.
After this, any 4.3 or 4.4 ROM should let you edit APN settings, etc. You may need to set your radio to GSM (auto PRL) by going into your dialer and hitting *#*#4636#*#* and going into Phone Information then down to network type or whatever. I don't have a Motorola phone in front of me If that doesn't work, I've noticed GSM/WCDMA (auto PRL) works for some.
Good luck
Edit: I forgot one crucial thing you must do. You have to use RadioComm to enable GSM/UMTS bands. You can find it with Google. The version I used is 11.12.2. You'll either have a green or purple light on the right side, signifying that your phone is connected. It should show up in the status bar too. Steps:
Ensure you have correct Motorola drivers and that device shows up in device manager (You may need to use Google USB driver, as this has worked with some Motorola phones for me)
Ensure that USB is in PC Tools mode
In Radiocomm go to MA->COMMON->MDM 6x00
Go to the FTM Common1 tab, and wait for purple or green light on side
Toward the top of NVAccess you'll see a select box. Scroll to NV item 1877 NV_RF_BC_CONFIG_I
Click on read value
Once read, replace the first 8 bytes with: 8703E80400000200 (back up original as a .txt file or something)
Write the new value to the device and reboot
There's also a flashable zip that does this, but I've not tested it. Use at your own risk:
http://forum.xda-developers.com/attachment.php?attachmentid=1048524&d=1336485537
All of the information I presented is from others, but I can't remember all the threads I got this from. I take no responsibility for any bricked phones or the like.
Click to expand...
Click to collapse
I'm not sure what the deal is - I'm trying to do the same thing, but with T-Mobile US rather than Straight Talk... Should work fine, but when I make the above changes, I get com.android.phone stopped working over and over. If I follow every step above, but instead of "ro.telephony.default_network=3", I use "ro.telephony.default_network=7", it works fine, I can make calls on T-Mobile, but the signal strength is horrible. I can be where I normally have full 2G/3G signal, and the Bionic barely has one bar if anything. Most of the time it just says "No Service" unless I step outside, whereas my other T-mobile specific phones have no problems with the signal anywhere in my house.
What might I be doing wrong here? I just bought the Bionic as a backup as I've been told it works fine with GSM when you do the above tweaks, but I'm finding it's real-world operability on GSM to be less than stellar.
gully52 said:
I'm not sure what the deal is - I'm trying to do the same thing, but with T-Mobile US rather than Straight Talk... Should work fine, but when I make the above changes, I get com.android.phone stopped working over and over. If I follow every step above, but instead of "ro.telephony.default_network=3", I use "ro.telephony.default_network=7", it works fine, I can make calls on T-Mobile, but the signal strength is horrible. I can be where I normally have full 2G/3G signal, and the Bionic barely has one bar if anything. Most of the time it just says "No Service" unless I step outside, whereas my other T-mobile specific phones have no problems with the signal anywhere in my house.
What might I be doing wrong here? I just bought the Bionic as a backup as I've been told it works fine with GSM when you do the above tweaks, but I'm finding it's real-world operability on GSM to be less than stellar.
Click to expand...
Click to collapse
What rom are you using? I've used this technique on a ridiculous number of bionic roms to make them GSM so hopefully I can help, it's worth noting that I do not create a localprop. I found that most roms have the "ro.telephony.ril.v3" line in the default.prop and I can simply amend them by adding "signalstrength," (note the comma to include the end of the quotes) at the beginning of the entry. You might try wiping the rom and starting over but skip the step changing the radio with the *#*#4636#*#* part
---------- Post added at 11:15 AM ---------- Previous post was at 11:10 AM ----------
shadolis said:
For the novices, to do this last part, you'll need a file manager like ES that can utilize root permissions after enabling in settings.
After this, any 4.3 or 4.4 ROM should let you edit APN settings, etc. You may need to set your radio to GSM (auto PRL) by going into your dialer and hitting *#*#4636#*#* and going into Phone Information then down to network type or whatever. I don't have a Motorola phone in front of me If that doesn't work, I've noticed GSM/WCDMA (auto PRL) works for some.
Click to expand...
Click to collapse
The settings adjusted in the default.prop permit that you do not need to change the radio. since i started using these particular settings, I've never had to change it and additionally found it to be commonly problematic. I also found that MOST roms do not need you to add the straight talk APN. Cyanogen and Paranoid, I know for fact include them. When you boot the phone for the first time you'll need to go into the settings and select the appropriate Straight Talk APN (mine is the MVNO one).
HW-A vs. HW-C
Plasmaleto said:
What rom are you using? I've used this technique on a ridiculous number of bionic roms to make them GSM so hopefully I can help, it's worth noting that I do not create a localprop. I found that most roms have the "ro.telephony.ril.v3" line in the default.prop and I can simply amend them by adding "signalstrength," (note the comma to include the end of the quotes) at the beginning of the entry. You might try wiping the rom and starting over but skip the step changing the radio with the *#*#4636#*#* part.
Click to expand...
Click to collapse
I've tried with stock JB, as well as CM11 M11 in Slot 1. I've wiped and started over more times than I can count.
What do you mean that you add "signalstrength," at the beginning of the ro.telephony.ril.v3 entry? It's my understanding that the entry should be "ro.telephony.ril.v3=signalstrength". I don't understand what you mean by putting signalstrength at the beginning of the entry. Also, what's up with that comma?
Then again, all my difficulties could be in the fact that I have a "HW C" Bionic. Just got a "HW A" model, and will be tinkering with that soon too. It actually came with original Stock 5.5.886 Gingerbread ROM... Right now, I plan on upgrading to the 232 ICS leak (so I can go back to GB if needed), and see if I can get GSM working on it a little better.
How would you recommend I proceed with a bone stock ICS 6.7.232 ROM?
Thanks a BUNCH for your reply on this old (but fun to tinker with) phone!
Brian
gully52 said:
I've tried with stock JB, as well as CM11 M11 in Slot 1. I've wiped and started over more times than I can count.
What do you mean that you add "signalstrength," at the beginning of the ro.telephony.ril.v3 entry? It's my understanding that the entry should be "ro.telephony.ril.v3=signalstrength". I don't understand what you mean by putting signalstrength at the beginning of the entry. Also, what's up with that comma?
Then again, all my difficulties could be in the fact that I have a "HW C" Bionic. Just got a "HW A" model, and will be tinkering with that soon too. It actually came with original Stock 5.5.886 Gingerbread ROM... Right now, I plan on upgrading to the 232 ICS leak (so I can go back to GB if needed), and see if I can get GSM working on it a little better.
How would you recommend I proceed with a bone stock ICS 6.7.232 ROM?
Thanks a BUNCH for your reply on this old (but fun to tinker with) phone!
Brian
Click to expand...
Click to collapse
Ahhhh yes, i believe you found the root of the issue. The method that was used for Ginger Bread was slightly different which almost certainly why the above may not be working for you. I practically forgot about that, I upgraded mine years ago. I've grown so fond of the bionic I'm on my third you can buy them second hand for like $50 to $100. So i Just keep fixing/repairing them haha.
I'm gonna dig through some old book marks and tutorials and find out how I upgraded mine originally and I'll post them up here for you. The timing of this coming up is almost bizarre. I'm actually in the middle of working on a website that lets you point it at a rom, it downloads it, modifies it for GSM, then provides you a link to download it. I'd actually like to make it an Android app because when I download rom updates, I have to make them GSM compatible first.
Plasmaleto said:
Ahhhh yes, i believe you found the root of the issue. The method that was used for Ginger Bread was slightly different which almost certainly why the above may not be working for you.
Click to expand...
Click to collapse
As I mentioned above, I just received the phone that's still running Gingerbread on Rev. A Hardware. Haven't even tried to start messing with that phone yet.
The original phone I was having trouble with, prompting the post to this thread, was running stock Jelly Bean on Rev. C hardware.
You say you're on your 3rd Bionic because you like them so much! They are a rugged and capable phone, for sure. What carrier have you been using it with? I've been attempting plain old T-Mobile, but assume making it work for Straight Talk would make it work for T-Mobile as well, aside from APN settings.
How's your signal strength on your bionic compared to an official GSM phone, both for calls and data?
gully52 said:
As I mentioned above, I just received the phone that's still running Gingerbread on Rev. A Hardware. Haven't even tried to start messing with that phone yet.
The original phone I was having trouble with, prompting the post to this thread, was running stock Jelly Bean on Rev. C hardware.
You say you're on your 3rd Bionic because you like them so much! They are a rugged and capable phone, for sure. What carrier have you been using it with? I've been attempting plain old T-Mobile, but assume making it work for Straight Talk would make it work for T-Mobile as well, aside from APN settings.
How's your signal strength on your bionic compared to an official GSM phone, both for calls and data?
Click to expand...
Click to collapse
The #1 reason I continue using bionics is because of how cheap parts are if I need them (like when I drop them and break the screen ) and accessories. Like I have several docks that I've bought for like $7 a piece (retail was like ridiculous $40 or something but just for a dock $7 is dirt cheap). I even got the lapdock that I picked up on ebay for $50. You can't beat it. That thing is awesome. Add to it that you can get a micro HDMI to HDMI cable, hook this thing up to a TV and use it as an entertainment player sorta like a roku and it just keeps getting better. You can then use another android device and run AllCast to turn it into a chromecast wannabe. I've just found endless fun, with this particular model of android.
I personally utilize Straight Talk. No BS, $45 every month, no surprises. Love it. As far as GSM signal goes, it's like any other GSM phone!
gully52 said:
As I mentioned above, I just received the phone that's still running Gingerbread on Rev. A Hardware. Haven't even tried to start messing with that phone yet.
The original phone I was having trouble with, prompting the post to this thread, was running stock Jelly Bean on Rev. C hardware.
You say you're on your 3rd Bionic because you like them so much! They are a rugged and capable phone, for sure. What carrier have you been using it with? I've been attempting plain old T-Mobile, but assume making it work for Straight Talk would make it work for T-Mobile as well, aside from APN settings.
How's your signal strength on your bionic compared to an official GSM phone, both for calls and data?
Click to expand...
Click to collapse
So here's what I would do
1) Update to Jelly Bean (you can do this with official Motorola OTA updates or more info here http://forum.xda-developers.com/showthread.php?t=2235946)
2) Power on phone and edit the hex values with Radiocomm see: post 29/30 http://forum.xda-developers.com/showthread.php?t=1297714&page=3
- - Be PARTICULARLY picky about this part, I found this to be extraordinarily difficult time and time again. Even though I've done it at least 5 or 6 times, I felt like it never went exactly as it should. After changing the value, you might even disconnect, reconnect, and make sure the hex value has changed.
3) Root the phone (this guide seems a little indepth but it works very well once you get it down compared to other methods http://forum.xda-developers.com/showthread.php?t=2256439)
4) At this point you have a choice of either modifying stock rom or use custom ROMS. I HIGHLY recommend custom ROMS, the stock ROM is highly bloated. I have found that AOSP based ROMS like Cyanogen or Paranoid (personal recommendation), work considerably better in general in addition to being more suited for GSM usage.
Should you choose custom roms then here's what I would do next, I have found this is the easiest way to consistently use GSM:
a) You'll want to install SafeStrap or something similar (I've only got experience with SafeStrap personally and understand the developer has suspended his project from future updates but still works for me) http://forum.xda-developers.com/showthread.php?t=1391875
b) Once you have that, you can download almost any ROM, extract it to a folder, change the build.prop with the proper GSM configuration you listed, find the line for "ro.telephony.ril.v3" inside build.prop and add "signalstrength," (including punctuation) immediately after the equal sign. Don't bother with local.prop.
c) Re-zip it just like it was before, then install the ROM in a SafeStrap slot (probably want to add GApps)
d) Once it's booted, you can connect to wifi to setup the Google Acct and whatnot, then (this part varies slightly depending on the rom but AOSP roms are all pretty similar) go into the Settings: Mobile Networks: Access Point Names: Select the carrier of your choice (there's literally hundreds preloaded)
Lot of detail but a lot of specifics left out, if I can expound on anything please let me know which areas are too vague.
UPDATE: Here's the ROM I'm currently using. I literally install this thing with safe strap along with the pa gapps modular micro and just use it. No editing files, no thing. Just use it.
Paranoid Android Legacy Original - http://get.aospa.co/legacy/targa
Paranoid Android Legacy GSM Ready - http://dailen.bitnamiapp.com/roms/pa_targa-4.6-BETA5-20141022.GSM.zip
PA Gapps Modular Micro - https://www.androidfilehost.com/?w=files&flid=15801
Above and Beyond
Plasmaleto said:
Here's the ROM I'm currently using. I literally install this thing with safe strap along with the pa gapps modular micro and just use it. No editing files, no thing. Just use it.
Click to expand...
Click to collapse
Wow! This is above and beyond! Truly thankful for this guide. I'm fairly familiar with ROMs in general and putting Safestrap on the Bionic... but the fact that you hand-edited the PA ROM and provided a link... I deserve not such service!
Will attempt a flash tonight and let you know. Still plan to keep stock 232 ICS leak, since it will never get used once PA is installed! Will reply tomorrow if I get everything working!
Thanks again!
---------- Post added at 11:05 PM ---------- Previous post was at 10:28 PM ----------
Plasmaleto said:
a) You'll want to install SafeStrap or something similar (I've only got experience with SafeStrap personally and understand the developer has suspended his project from future updates but still works for me)
Click to expand...
Click to collapse
What version of Safestrap are you running? I installed 3.73, and once installed, my stock ICS 232 gets stuck on the boot animation forever. FXZ back to 905 and then update to 232 to get back into ICS...
I dunno, maybe I'm making a big deal out of wanting to keep the path back to gingerbread. I should probably just bite the bullet and go up to stock JB first as you mentioned...
gully52 said:
Wow! This is above and beyond! Truly thankful for this guide. I'm fairly familiar with ROMs in general and putting Safestrap on the Bionic... but the fact that you hand-edited the PA ROM and provided a link... I deserve not such service!
Will attempt a flash tonight and let you know. Still plan to keep stock 232 ICS leak, since it will never get used once PA is installed! Will reply tomorrow if I get everything working!
Thanks again!
---------- Post added at 11:05 PM ---------- Previous post was at 10:28 PM ----------
What version of Safestrap are you running? I installed 3.73, and once installed, my stock ICS 232 gets stuck on the boot animation forever. FXZ back to 905 and then update to 232 to get back into ICS...
I dunno, maybe I'm making a big deal out of wanting to keep the path back to gingerbread. I should probably just bite the bullet and go up to stock JB first as you mentioned...
Click to expand...
Click to collapse
For some reason I distinctly remember their being a link between the stock rom, and those installed in rom slots. I'm currently using 3.7.2. I also THINK I recall that a while back when I wanted to use SafeStrap 3.5 I only could do so if I upgrade to JB. I can't find any documentation to back these up so take it with a grain of salt. Personally, I'm one who upgrades and never looks back so maybe I'm just biased haha
(P.S. your eyes do not deceive you, my username changed from Plasmaleto to Dailen, special request made to XDA webmasters!)
I've made a tool to convert Bionic ROMS to GSM ready if anyone would like to give it a shot I'm likely to move or relocate this at some point btw
http://dailen.bitnamiapp.com/roms/convert.php
Relocated:
http://dailen.net/roms/convert.php
Dailen said:
For some reason I distinctly remember their being a link between the stock rom, and those installed in rom slots. I'm currently using 3.7.2. I also THINK I recall that a while back when I wanted to use SafeStrap 3.5 I only could do so if I upgrade to JB. I can't find any documentation to back these up so take it with a grain of salt. Personally, I'm one who upgrades and never looks back so maybe I'm just biased haha
(P.S. your eyes do not deceive you, my username changed from Plasmaleto to Dailen, special request made to XDA webmasters!)
Click to expand...
Click to collapse
Dailen (the artist formerly known as Plasmaleto),
I took the plunge and updated to stock JB, rooted, installed Safestrap 3.73, then installed your pre-GSM-configured version of Paranoid ROM. Rebooted, connected to wifi, got everything setup. Powered down, inserted my T-Mobile SIM card, and voila! Full HSPA signal! 5.01mb/sec download, 1.22mb/sec upload. Outgoing calls work! Incoming calls work! Data works! Super cool! Thanks again!
Congrats! Glad that worked for ya!
Dailen said:
I've made a tool to convert Bionic ROMS to GSM ready if anyone would like to give it a shot I'm likely to move or relocate this at some point btw
http://dailen.bitnamiapp.com/roms/convert.php
Click to expand...
Click to collapse
Just trying your tool on the CM11 M11 release. Will let you know how it works. Do you know, if I came across some older ROMs... JB 4.2/4.3, would your tool work for them as well?
Also, since you're a Bionic nut, I don't suppose you have a version of CarbonROM sitting around from before they dropped support for the Bionic? I contacted them and was surprised to learn that they have absolutely ZERO archive of old version downloads.
gully52 said:
Just trying your tool on the CM11 M11 release. Will let you know how it works. Do you know, if I came across some older ROMs... JB 4.2/4.3, would your tool work for them as well?
Also, since you're a Bionic nut, I don't suppose you have a version of CarbonROM sitting around from before they dropped support for the Bionic? I contacted them and was surprised to learn that they have absolutely ZERO archive of old version downloads.
Click to expand...
Click to collapse
Well in theory the answer is yes. The way my script works, it changes only what it finds. If you can send me a link to one of the roms you'd like to try I'd be happy to take a look at the build.prop and tell you for sure if anything is missing.
Also, I don't recall having the carbonrom sitting around anywhere but I see their github still has the source posted, I suppose I could always try compiling for you. I got a couple ubuntu systems running I could put to some good use. Might take a few days.
Give it a shot!
Going to give this a shot right now on a friends Bionic. Unfortunately have to wait a few days for the Straight Talk Sim card to arrive. I'll report back.
Think I screwed up!
Dailen said:
Congrats! Glad that worked for ya!
Click to expand...
Click to collapse
I believe I have screwed up. I tried the radiocomm program last night and everything was green for me but I didn't write to the phone. I installed the pa_targa-4.6-BETA5-20141022.GSM.zip file, and the Gapps for that ROM. When I tried to go into Radiocomm again, it comes up red when I try to read (1877). Do I still need to do that or will the phone be good to go once I pop in an AT&T sim card? Thanks, Howie
meandg5 said:
I believe I have screwed up. I tried the radiocomm program last night and everything was green for me but I didn't write to the phone. I installed the pa_targa-4.6-BETA5-20141022.GSM.zip file, and the Gapps for that ROM. When I tried to go into Radiocomm again, it comes up red when I try to read (1877). Do I still need to do that or will the phone be good to go once I pop in an AT&T sim card? Thanks, Howie
Click to expand...
Click to collapse
Radiocomm is EXTREMELY particular and I swear it only works 3 out of 5 times. I seem to recall that when I did it, it wasn't "writing" the settings properly and I had to change the USB connection type. If my current setup is any indicator, it was set to "PST USB Driver". I also recall that one time I uninstalled the bionic drivers and reinstalled them and it started working.
It's probably worth mentioning that I would connect to your phone in Radiocomm while in the stock rom if possible. There's no telling if there's some quirky specific USB driver in the rom that Radiocomm depends on. When in doubt, try a different machine. Be sure to get the Bionic USB drivers working 100% (meaning no device errors in device manager) prior to doing the radiocomm stuff.