I have using Galaxy Tab M180S from Korean.
I can call, 3G, wifi is OK. But I cannot using camera because have program "Mobile Security Service" lock camera.
And I cannot mount SD card in Galaxy tab.
And also it cannot connect with the cable to computer.
Please someone help me!
Turn off tab. Hold volume up and squeeze power button for a while until you see BLM recovery (blue text) use volume key to select factory reset, confirm with power button. After wipe, the program should be gone, along with every other installed app and your data.
Related
I've installed Softick Card Export II v2.12 in order to get a useable mass storage device.
There was a message that I should not run Card Export before I soft reset device, which I did.
BUT, big but, there was O2 logo, then WindowsMobile logo and then light turned off..five minutes later the Windows logo was still on the screen and my Wizard cannot boot up system completely. Holding Power button doesn't do anything,so I had to press that small Harr reset button. I tried one more time, leavin the phone on for 15 minutes, but the story was the same..Windows Mobile..and nothing else. Even keyboard and green/red button stopped being lit.
I can hear on my speakers that the phone is working (electric iterference).
I thought I could just put new ROM over it, but then saw that I need a working ActiveSync connection in order to do that.
Please, does anyone have an advice on what to do?[/url]
Any 3..4..5 button-combinations that could reset the device and format internal memory?
Hold VoiceDial + CommManager button and press the soft-reset button, then press the Send button (Green button) to hard-reset your device.
Why did you install v2.12 because v2.17 is already released?
It's better to install WM5torage 1.60, it does the same and is freeware and works A LOT better!
Thanks a million!
Hi everyone,
I was using my nexus one with low battery, and then it shut down.
I went back to car, attached it to the recharger, and pushed power button.
At this point it turned on and a setup similar to first boot appeared (selection of language, date & time, google account)..
Once the setup was completed, I pressed the home button and associated it with Launcher Pro.
At this point a popup message appeared, saying (translated from italian):
"Sorry! Sudden interruption of the application Launcher Pro (process Android.process.acore). Retry.", with a button named "Retry".
- If I press the "Retry" button, the same popup message appears on and on again.
- If I shut the phone down and restart it, it asks for the SIM pin, the unlock pattern, and then the popup message appears again and again..
- I can't access the menu through the button, and I am stuck in this situation!..
- I tried to uninstall Launcher Pro via appbrain about two hours ago, but with no luck..
Any help would be much appreciated..
Thanks!
Nexus One
Vodafone Italy
Not rooted
Froyo OTA (FRF91?)
Assuming you aren't rooted, I just want to let you know you always have the last resort of resetting the phone back to default, so the phone itself is still fine.
With root, you can ADB and remove LauncherPro.
Hi cigar3tte,
I'm not rooted, so I could "reset the phone back to default".
Do you mean reset it to factory default (aka hard reset)?
Note: If I press the menu button at the bottom of the device, nothing happens and the popup keeps showing up
However, the procedure I found for the hard reset is this:
"With the phone shut off, while holding down the volume button on the side of the N1, press the power button briefly while maintaining the volume button pressed in for around 5-10 seconds.
You should be presented with a menu that allows for: Fastbook, Recovery, Clear Storage, and Simlock. You can release the volume button at this time.
Select Clear storage with the volume button up and down, then press and release the power button to make the selection.
It will ask you to confirm this decision. Press the yes button using the volume up."
Should i proceed so?
Thanks!
meils said:
Hi cigar3tte,
I'm not rooted, so I could "reset the phone back to default".
Do you mean reset it to factory default (aka hard reset)?
Click to expand...
Click to collapse
Yes, I meant a factory reset. Before doing so, check for any data you might want to save.
As for the method, what you found should work fine. I've never done a hard reset from the default recovery. I've only done it from the phone itself (which you can't access) and custome recovery.
Hi cigar3tte,
I followed your suggestion and did the shut-off-and-on procedure.
After that, I was asked to complete the initial configuration (time, google account, etc). and I am now on the home screeen!
Thank you so much for your help!
For future reference, you would probably have been able to fix this without wiping... turn the phone on, then when the X appears hold the trackball, it should boot in safe mode and you can remove/clear data as needs be.
AuraxTSense ROM - I know someone having this issue, anything they can try short of full wipe?
I tried looking through all of the threads, Google, & every other method i could think of to find the answer to my question, but i can't seem to find anyone else with my issue.
I was in the process of trying to put the Honeycomb build on my internal memory, when i realized i was never able to get Clockwork Recovery working as it's supposed to. Whenever i select AND option, all i get is a blank screen (image attached). I have tried reflashing the recovery, both manually & through ROM Manager & even flashing it to the SD card (as stated in the Honeycomb tutorial) i'm still getting blank options.
I know my way around Android devices (never had any trouble rooting/flashing my EVO but this seems to have me stumped for now. Don't need anyone to hold my hand through it, just a push in the right direction would be a huge help.
~Thanks in advance.
go here: http://forum.xda-developers.com/showthread.php?t=922870
download the clockwork mod only sd card image
burn the image to your sd card via winimage
mounts and storge format boot/system/data(may crash, just hard reset)
now you should be able to reflash the image of your choice.
EDIT: Didn't see the picture until I logged in. I don't think any of my original post below is helpful for this problem.
Are you using the power key to select and turning the screen off? I've done that on my phone--used power instead of camera, and it turns the screen off. If you hit power again, it toggles the screen back on. Of the top of my head, I don't remember what the select button for the NC is, but the only other option we have is the "n" button.
robjective said:
EDIT: Didn't see the picture until I logged in. I don't think any of my original post below is helpful for this problem.
Are you using the power key to select and turning the screen off? I've done that on my phone--used power instead of camera, and it turns the screen off. If you hit power again, it toggles the screen back on. Of the top of my head, I don't remember what the select button for the NC is, but the only other option we have is the "n" button.
Click to expand...
Click to collapse
Wow i feel stupid. I thought Clockwork on the nook worked the same as on the EVO, with the power button being Select.
FYI to anyone that comes across this with the same problem: Power will clear the screen & the 'n' button needs to be used to select.
Thanks robjective
I searched but couldn't find anything on this. I have a user who has the AT&T Note 3. She likes to use easy mode. However she cannot use call waiting. It doesn't allow her to. If she turns off easy mode, it works just fine. Her boyfriend has the verizon model and it works fine for him in easy mode. Is there something i'm missing on the AT&T version. When i put her phone in easy mode, i checked to make sure that call waiting was ticked following these instructions:
From the Home Screen tap Phone.
Press the Menu key.
Tap Call settings.
Tap Additional settings.
Tick/Untick Call waiting.
If anyone can assist would be greatly appreciated. Thanks!
EDIT: If someone with a Note 3 on AT&T can test with their phone to see if it works, would be much appreciated. Just put your phone in Easy mode and then see if you can put a call on hold. This would help me out quite a bit and would let me know if its her phone or just AT&T stopping it from working. Thanks!
2nd EDIT: I contacted Samsung and they said it should work but doesn't. This is what Samsung said "If the Call waiting working in Standard mode and it is activated from the Carrier, we request you to reset the app preferences by following the below steps:
From the home screen touch menu or apps > settings > more > application manager > swipe the screen to left till you see “All” > touch menu > tap on Reset app preferences.
After that, please perform the soft reset on the phone.
Soft reset refreshes the device internal circuitry.
1. Turn off the handset.
2. Remove the battery and wait for 30 seconds.
3. Reinsert the battery and turn ON the device.
If the issue persists, please clear the cache of the device by following the below steps.
These troubleshooting steps will not delete the data of the device. However, the cache files and bug files will be cleared.
1.Power the device off (remove and re-insert the battery).
2.Press and hold the Volume Up key and the Home key, then press and hold the Power key.
3.When the device vibrates; release only the Power key.
4.When the Android system recovery menu displays; release the Volume Up and the Home key.
5.Navigate with the Volume keys to the “Wipe cache partition” option and press the Power key to select.
6.After user data deletes, press the Power key to reboot system now. "
None of the above worked. Went to Bestbuy and had the Samsung tech try it. He had an AT&T Note 3 and we tested. It did the same thing for him. I believe it maybe an issue with the KitKat update but not 100% sure. I will let Samsung and AT&T know and see if they can fix the issue.
Hi, just got a google glass xe-c a few days ago. It had a problem with wifi not connecting, trying to activate it using qr code gave an error "cannot connect to network" I had to activate it using mobile data in tether mode. Wifi settings card is always stuck on "turning on" everything else worked fine adb , fastboot hardware buttons etc.
I restored the factory image "xe23" from the official website but no change in wifi status. Today I got the bright idea to "downgrade" it.
just to have a look at older firmware and i thought maybe it would help with my wifi issue so i downloaded and flashed "xe10"
turns out it did not have the "activate using mobile data " feature and only way to activate it is using wifi, so i am stuck at activation screen. I tried pressing camera + power buttons to go into fastboot mode and it wont.
If i disconnect the usb cable , power off the device then hold down camera button and press power button, power led turns on , I release the power button while still holding camera button after a few seconds led is supposed to flash instead it just turns off and after that if i connect the usb cable nothing happens.
I also tried another approach, If i keep the usb cable to the pc, then power down and press the camera +power buttons , led again turns on , pc dectects the glass in fastboot but only for a second , again led turns off and thats it.