Related
Okay the first question:
Ive rooted my device using Unrevoked 3.22 at my HTC Buzz (Wildfire) 1.25 (I think thats the version, its 2.1Update1). And now i maybe want to unroot my phone to install the updates (The 1.27 update doesnt install, is there a solution to this without unrooting?) So, on to the question. How to unroot my device when ive used Unrevoked 3? I rooted it on my brothers MAC OSX, becuase its much safer in my opinion.
Second question:
Okay, Now i have installed the CM 6.10 Stable version. How long will it take to boot? It has been in the boot state for 2 hours and 15 minutes for now. Ive wiped the SD Card and Cache and the Factory reset before install. It does only say HTC with a white blank screen and green letters (as normal).
Thanks for your time reading!
Yours
Antezz
It took me less than 15 minutes. Obvious suggestion, but have you tried turning it off and on (pull the battery and try again).
Why did you wipe your sd card? Lol
Sent from my HTC Wildfire using XDA App
kevin2516 said:
Why did you wipe your sd card? Lol
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Get cyanogen on your sd card, and try to flash it again?
argeoff said:
Get cyanogen on your sd card, and try to flash it again?
Click to expand...
Click to collapse
Okay to be honest i didnt really wipe my SD card. I have tried rebooting this 2 times, and Reflashing it 3 times. It doesnt work. I tried to flash openfire 2.3 today and it works perfectly, but ive heard that the Cyanogen is much better.
howzit man.
restore your original backup with nandroid.
then .
1.) wipe cache
2.) factory reset
3.) go into advanced on clockwork recovery and wipe dalvik cache.
I had the same problem! this works
if not, redownload CM and transfer to your phone again. and go to number 1
let me know how it goes..
You should wipe your /CACHE, /DATA, /SYSTEM, /SDCARD, /SD-EXT
That way you'll be sure NOTHING will be on your phone...
After that, connect your phone with USB to pc. Mount the sdcard.
Put Cyanogenmod.zip on it. Unmount it. Reboot into recovery.
You select: under main-> clear cache, clear default settings (or something like that), under advanced -> clear Dalvik cache, clear Battery status.
Now you just flash the zip on it and everything will be just fine... trust me...
Let me know how it worked out for you. k?
Just make sure that everytime your flash a .zip to the device you give it time to
settle down in the ROM... so that means you'll need to restart after each .zip you flash.
That's what I do and I've never head any problems with it.
Greetings, Jason
@Jason
Thank you!
It worked perfectly. And i have no further questions.
It booted after 10 min, ít started to show the costum startup screen after appox. 30 sec. THANK YOU!
Antezz!
So I was on cm10.2 . Today i just wanted to use some stock experience for sometime as my exams are near so i wanted a stable rom.
So i tried to restore the Nand Backup from CWM. Restore was successful , Phone Boots everything is fine till that. After i enter to the setup wizard(Coz i wiped the data before making the backup) this error : Unfortunately the process com.google.gapps has stopped.
If i skip this then Setup Wizard Force Closes and then am not able to access anything on the phone. Everything seems to be force closing randomly?
Any Solution?
leo10messi said:
So I was on cm10.2 . Today i just wanted to use some stock experience for sometime as my exams are near so i wanted a stable rom.
So i tried to restore the Nand Backup from CWM. Restore was successful , Phone Boots everything is fine till that. After i enter to the setup wizard(Coz i wiped the data before making the backup) this error : Unfortunately the process com.google.gapps has stopped.
If i skip this then Setup Wizard Force Closes and then am not able to access anything on the phone. Everything seems to be force closing randomly?
Any Solution?
Click to expand...
Click to collapse
You have CM10.2 GAPPS (4.3) on 4.1.2 system. That is the problem. You should wipe system and preload partition before you did restore. Try it now again. Do wipes and restore backup again. Gapps are not in data paritition.
Im having a similar issue
Hi! the same is happening to me, but im sure i flashed the right gapps from cwm. also, i tryed to restore a previous back up, the restore seems succesfull but when i boot i still see the setup wizard, even when i flash the right gapps after restore. I tryed cleaning caché, doing a factory reset. I dont know what else to do. The last thing i was doing with my working phone was trying (but i uninstalled it after a while) swapper2. but i letft my sd card only with fat32 as in the begining.
shut_down said:
You have CM10.2 GAPPS (4.3) on 4.1.2 system. That is the problem. You should wipe system and preload partition before you did restore. Try it now again. Do wipes and restore backup again. Gapps are not in data paritition.
Click to expand...
Click to collapse
It didnt help....still got the same error. If i skip it...setupwizard also force clolses? :/
leo10messi said:
It didnt help....still got the same error. If i skip it...setupwizard also force clolses? :/
Click to expand...
Click to collapse
Try to install gapps for 4.1.2 JB.
shut_down said:
Try to install gapps for 4.1.2 JB.
Click to expand...
Click to collapse
But I backed up the stock ROM ... why should we restore flash gapps 4.1.2?
leo10messi said:
But I backed up the stock ROM ... why should we restore flash gapps 4.1.2?
Click to expand...
Click to collapse
I know I had similiar problems when I was going from CM to stock. I can't remember what exacly I did to solve it. I will look on some posts I wrote before. You have problems with gapps, that ia why it force close.
P.S. Solution for someone was to flash some custom ROM. Try with that.
Sent from my GT-I9070 using Tapatalk
shut_down said:
I know I had similiar problems when I was going from CM to stock. I can't remember what exacly I did to solve it. I will look on some posts I wrote before. You have problems with gapps, that ia why it force close.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Ok mate let me know if you find the solution Thanks
At least you have stock backup in cwm. I created mine in twrp, therefore I cannot go back at all now with cwm restore...
jazzh said:
At least you have stock backup in cwm. I created mine in twrp, therefore I cannot go back at all now with cwm restore...
Click to expand...
Click to collapse
Put CoCore with TWRP on SD and install it from CWM.
I had same problem. I never use GAPPS, so I have not flashed the zip. Still I encountered this strange problem.
I found two possible methods which may help.
To restore 'stock JB backup' you must flash CM 10.1(4.2.2) or CM 10(4.1) and make sure you wipe data,cache and dalvik-c before and after flashing.
The from CM 10.1/10 recovery restore the stock JB backup.
If that did not work, the use ODIN to flash the stock JB firmware and then flash custom recovery. With this recovery you can restore either data or all of the partitions. GOOD LUCK
shut_down said:
Put CoCore with TWRP on SD and install it from CWM.
Click to expand...
Click to collapse
And what will I get, permanent twrp ? If yes, then that's it.
jazzh said:
And what will I get, permanent twrp ? If yes, then that's it.
Click to expand...
Click to collapse
Yes, we do not have temp TWRP.
Sent from my GT-I9070 using Tapatalk
shut_down said:
Yes, we do not have temp TWRP.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
can i restore my cwm backups from TWRP?
---------- Post added at 08:19 PM ---------- Previous post was at 08:12 PM ----------
well... after installing cocore with TWRP and then flashing gapps 4.1.2 from there, the problem persist. As i said before, after flashing stock rom from odin, then gapps from any recovery, the problem persist. wt* am i doing wrong!?
let me remember you, I am not who started this thread, but i have a similar issue.
Thanks
Edit: in order to bring you clues in case you may help me. I noticed that the keyboard doesnt show up if i try to write the password of the wi-fi network in setup wizard, also gapps still crashing as soon the phone boots and setup wizard after i try to skip it.
later edit: HEY HEY HEY! i noticed in "show log" option in cwm that after restoring the backup there are two issues:
I: Can't format unknow volume: /external_sd
I: Can't partition unsafe device: /dev/block/mmcblk0p8
hmmm... i didn't expect that.
keep updating: both cyanogen 10.0 and 10.2 don't even boot. they stay stucked in the pretty loading screen.
didn't find anything helpfull to do from recovery or odin
any clue?
just for the record (if anyone came here looking for an answer) i did a downgrade to 2.3.6 with this guide: (it is in spanish, but provides all the files and im sure you can find one in your language)
grupoandroid . com/topic/67294-gbguia-downgrade-de-jb-a-gb/ (delete spaces)
now i will upgrade to JB again, i hope that without problems.
edit: FUUUUUUUUUUUUUUUUUUU!
after 2.3.6 working without issues, flashed 4.1.2 from sammobile with odin (the same .md5 that i had for months!) and the problem came again. gapps error, and couldnt finish the setup wizard....
alete89 said:
just for the record (if anyone came here looking for an answer) i did a downgrade to 2.3.6 with this guide: (it is in spanish, but provides all the files and im sure you can find one in your language)
grupoandroid . com/topic/67294-gbguia-downgrade-de-jb-a-gb/ (delete spaces)
now i will upgrade to JB again, i hope that without problems.
edit: FUUUUUUUUUUUUUUUUUUU!
after 2.3.6 working without issues, flashed 4.1.2 from sammobile with odin (the same .md5 that i had for months!) and the problem came again. gapps error, and couldnt finish the setup wizard....
Click to expand...
Click to collapse
Ok, try to install some ROM now. I remember that someone solved with that. But manual mount system and preload partitions just in case.
I had similar problems after coming back from CM10 before.
If that do not help, (have CWM or TWRP) put some ROM zip on SD - wipe ALL (cache, dalvik cache, system, preload, factory reset) and install ROM again.
shut_down said:
Ok, try to install some ROM now. I remember that someone solved with that. But manual mount system and preload partitions just in case.
I had similar problems after coming back from CM10 before.
If that do not help, (have CWM or TWRP) put some ROM zip on SD - wipe ALL (cache, dalvik cache, system, preload, factory reset) and install ROM again.
Click to expand...
Click to collapse
I couldn't install CM10 or 10.2 from CWM after wiping cache, dalvik, system, preload, and factory. I got
"getprop(ro.build.product) = i9070, getprop(ro.product.device) = GT-I9070
error or something like that and i get stucked.
I'll downgrade again and keep it for one day until the night, i can't be without my phone one more day.
alete89 said:
I couldn't install CM10 or 10.2 from CWM after wiping cache, dalvik, system, preload, and factory. I got
"getprop(ro.build.product) = i9070, getprop(ro.product.device) = GT-I9070
error or something like that and i get stucked.
I'll downgrade again and keep it for one day until the night, i can't be without my phone one more day.
Click to expand...
Click to collapse
Wait, do you have I9070P? That error is shown if you try to install CM on I9070P.
shut_down said:
Wait, do you have I9070P? That error is shown if you try to install CM on I9070P.
Click to expand...
Click to collapse
nono, i have I9070. 100% sure.
I have tried multiple times to flash jfbs's Kitkat rom without sucess. I am using CWM 6.0.4.5 from his OP, have tried different downloads of the rom, have done multiple wipes and factory resets, all to no avail.
After the install I get the boot animation that runs for about five minutes then boots to a black screen with the status or navigation bar (the one on top of the screen with battery level and signal strength) but the bar is on the bottom and the rest of the screen is black. Any help would be appreciated.
I am able to flash other roms without a problem including Kitkang v1 by Awsome.
Any help would be appreciated.
I have seen the status bar problem, but it normally goes away after a couple of seconds, the longest I had it was about 3 mins when opening Facebook. Try wiping everything including internal SD. Not you external. See it that helps
Sent from my SGH-T679 using XDA Premium 4 mobile app
I have noticed the status bar on the bottom since the 12\25 build. Changed a few things with a test build last night and it is still present. Do you get a black screen with builds prior to 12\25?
tazmaniondvl said:
I have seen the status bar problem, but it normally goes away after a couple of seconds, the longest I had it was about 3 mins when opening Facebook. Try wiping everything including internal SD. Not you external. See it that helps
Sent from my SGH-T679 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
When I do a wipe data/factory reset isn't that wiping my internal SD?
No. It wipes data partition and cache.
jfbs said:
I have noticed the status bar on the bottom since the 12\25 build. Changed a few things with a test build last night and it is still present. Do you get a black screen with builds prior to 12\25?
Click to expand...
Click to collapse
I have not tried an earlier build recently, but tried the 12/08 build when it first came out and it worked ok. I'll try to install the 12/08 build again and maybe dirty flash to the most recent build.
jfbs said:
No. It wipes data partition and cache.
Click to expand...
Click to collapse
Sorry for the noob question, but how do I wipe the internal SD?
I would try that too. I really don't know why its giving you troubles, but you shouldn't have to wipe sdcard even though it's recommended. I have some newer builds, but I'm trying to get the stock camera working before I upload another.
---------- Post added at 07:02 PM ---------- Previous post was at 06:59 PM ----------
Go to wipe > advanced wipe and select sdcard, then swipe to confirm.
Edit: noticed you're using cwm, so hold on and I'll switch to that and get back in a few.
jfbs said:
I would try that too. I really don't know why its giving you troubles, but you shouldn't have to wipe sdcard even though it's recommended. I have some newer builds, but I'm trying to get the stock camera working before I upload another.
Click to expand...
Click to collapse
Thanks will give the wipe SD a try and if that does not work I'll try an older build.
mpces said:
Thanks will give the wipe SD a try and if that does not work I'll try an older build.
Click to expand...
Click to collapse
In cwm go to mounts and storage and select format /storage/sdcard0.
jfbs said:
I would try that too. I really don't know why its giving you troubles, but you shouldn't have to wipe sdcard even though it's recommended. I have some newer builds, but I'm trying to get the stock camera working before I upload another.
---------- Post added at 07:02 PM ---------- Previous post was at 06:59 PM ----------
Go to wipe > advanced wipe and select sdcard, then swipe to confirm.
Edit: noticed you're using cwm, so hold on and I'll switch to that and get back in a few.
Click to expand...
Click to collapse
Already started with the wipe and reinstall
mpces said:
Already started with the wipe and reinstall
Click to expand...
Click to collapse
Did the wipe of the internal SD and still have the same problem.
I have the battery stat and the signal strength on the bottom right corner and black screen. When it goes to sleep after 30 seconds or so I can press the power button and it brings up the unlock screen which when I unlock brings me back to the black screen.
mpces said:
Did the wipe of the internal SD and still have the same problem.
Click to expand...
Click to collapse
Did you wipe sdcard, install 12\08, reboot, boot back to recovery and installed 12\25, wiped cache and dalvik, rebooted and got black screen already? Did you have black screen with 12\08?
jfbs said:
Did you wipe sdcard, install 12\08, reboot, boot back to recovery and installed 12\25, wiped cache and dalvik, rebooted and got black screen already? Did you have black screen with 12\08?
Click to expand...
Click to collapse
Tried the 12/25...will try the 12/08 now
mpces said:
Tried the 12/25...will try the 12/08 now
Click to expand...
Click to collapse
Ok wiped the internal SD again, factory reset and data wipe, wiped cache, and wiped dalvick. Installed 12/08 rom and it has installed correctly. what would you advise next, flashing the 12/25 rom? And wiping what? Really appreciate the help, thanks!
mpces said:
Ok wiped the internal SD again, factory reset and data wipe, wiped cache, and wiped dalvick. Installed 12/08 rom and it has installed correctly. what would you advise next, flashing the 12/25 rom? And wiping what? Really appreciate the help, thanks!
Click to expand...
Click to collapse
Let's try something else. I'll upload a new build and see if changing the kernel made any difference. It'll take about 15 minutes, so keep an eye on the cm11 thread and avoid the 12/25 build for the time being.
jfbs said:
Let's try something else. I'll upload a new build and see if changing the kernel made any difference. It'll take about 15 minutes, so keep an eye on the cm11 thread and avoid the 12/25 build for the time being.
Click to expand...
Click to collapse
ok thanks
New build 12/29 did not work...same problem. Tried 12/08 rom and it installed ok then tried a dirty flash to 12/29 rom and had all kinds of problems. Went back to AOIP 4.2.2 for now.
I'm having the same problems. I've tried checking md5s and they match. 12/29 boots up from a clean install until I install banks standard and or core gapps. With standard gapps it locks up at the splash screen. With core gapps it locks up when it says android is upgrading.
Basically once I install gapps it's doomed. Same results with cwm and twrp. How are others able to install this ROM?
Are you wiping cache and dalvik-cache before installing gapps? If not before, after installing? Either way should work.
Hi,
I've been using galaxy tab 8.9 with custom ROMs for more than a year and a half now, and sometimes it was acting strange, like flickering dialogs and crashes. Usually this meant an unstable ROM or just cache wasn't cleared when a new ROM was installed. And it was stable for some time, till I did a reset. Now no ROM is stable any more in addition to this, the battery sometimes says it is empty, but after restart it is back to normal status. I tried number of ROMs without luck, all are flickering lately which must mean it is not ROMs fault.
I am running out of ideas what to do with this tablet, so I'm asking if you guys have any suggestions, what else can I do to fix it.
NOTE: when installing a new ROM, I always did it with CWM recovery from internal storage with data, cache, dalvik wipe and factory reset.
regards, Daniel
danizmax said:
Hi,
I've been using galaxy tab 8.9 with custom ROMs for more than a year and a half now, and sometimes it was acting strange, like flickering dialogs and crashes. Usually this meant an unstable ROM or just cache wasn't cleared when a new ROM was installed. And it was stable for some time, till I did a reset. Now no ROM is stable any more in addition to this, the battery sometimes says it is empty, but after restart it is back to normal status. I tried number of ROMs without luck, all are flickering lately which must mean it is not ROMs fault.
I am running out of ideas what to do with this tablet, so I'm asking if you guys have any suggestions, what else can I do to fix it.
NOTE: when installing a new ROM, I always did it with CWM recovery from internal storage with data, cache, dalvik wipe and factory reset.
regards, Daniel
Click to expand...
Click to collapse
Do you ever wipe the system partition?
upconvert said:
Do you ever wipe the system partition?
Click to expand...
Click to collapse
Agree. In TWRP, a factory reset only wipe data, cache and dalvik cache. You have to manually format system. A clean install requires to wipe system, data, cache and dalvik-cache.
---------- Post added at 08:18 AM ---------- Previous post was at 08:17 AM ----------
danizmax said:
Hi,
I've been using galaxy tab 8.9 with custom ROMs for more than a year and a half now, and sometimes it was acting strange, like flickering dialogs and crashes. Usually this meant an unstable ROM or just cache wasn't cleared when a new ROM was installed. And it was stable for some time, till I did a reset. Now no ROM is stable any more in addition to this, the battery sometimes says it is empty, but after restart it is back to normal status. I tried number of ROMs without luck, all are flickering lately which must mean it is not ROMs fault.
I am running out of ideas what to do with this tablet, so I'm asking if you guys have any suggestions, what else can I do to fix it.
NOTE: when installing a new ROM, I always did it with CWM recovery from internal storage with data, cache, dalvik wipe and factory reset.
regards, Daniel
Click to expand...
Click to collapse
Try flashing the original firmware via odin.
iZLeeP said:
Try flashing the original firmware via odin.
Click to expand...
Click to collapse
Flashing original firmware would be my last resort. Is there any difference between odin and CWM flashing?
danizmax said:
Flashing original firmware would be my last resort. Is there any difference between odin and CWM flashing?
Click to expand...
Click to collapse
Of course. Flashing original firmware via odin brings back the original setup that came with the tab out of the box. I just don't remember if it will delete the contents of internal sd card. In any case, you can flash original firmware thru CWM as I always do, though I only flash boot and system images I modified in Kitchen. It will still be stock but only that it has been debloated, rooted, busybox installed, init.d enabled, and some system apps replaced.
Just remember that when flashing ROMs via CWM do a factory reset (wipe data, cache, dalvik-cache). In addition to the wipe, the rom.zip itself formats the system partition prior to flashing.
Hello Everybody, My phone is Samsung Galaxy Ace S5830 and I have an issue.I am the one who is changing rom constantly.I was using the rom named ''Xperiance-Ace-v4_Sky_Walker_Studios'' for a long time.Lately i loaded another rom, 2 hours after i used, The phone was closed by itself, I tried open phone again but it stayed at boot animation screen.After that, I thought that rom is spoilt, I tried other roms but they stayed at boot animation screen as well.I tried all of roms that i have but result was same.I thought that i should try the rom which i was using before all those problems started.So i flashed Xperiance-Ace-v4_Sky_Walker_Studios Rom.Bizarre but it worked.When it opened i have faced with some pop-up ''android upgrading 0/70'' when it finished (70/70) i was at homescreen and all of my apps that i downloaded when i was using this rom at old days was there.It was so weird, And all aplications started to stop itselves and i even havent touched any of them. Like ''Unfortunately Whatsapp has stopped'' ''Unfortunately contacts has stopped'' ''Unfortunately facebook has stopped'' finally they all stoped working and i tried open applications, No application opened even contacts.
Present state: Only one rom is working, Others staying at boot animation screen and the rom which is working actually not working, Only phone is opening, No application working
What is the Problem? What Should i do? I am waiting your answers, THANKS.
Talha10 said:
Hello Everybody, My phone is Samsung Galaxy Ace S5830 and I have an issue.I am the one who is changing rom constantly.I was using the rom named ''Xperiance-Ace-v4_Sky_Walker_Studios'' for a long time.Lately i loaded another rom, 2 hours after i used, The phone was closed by itself, I tried open phone again but it stayed at boot animation screen.After that, I thought that rom is spoilt, I tried other roms but they stayed at boot animation screen as well.I tried all of roms that i have but result was same.I thought that i should try the rom which i was using before all those problems started.So i flashed Xperiance-Ace-v4_Sky_Walker_Studios Rom.Bizarre but it worked.When it opened i have faced with some pop-up ''android upgrading 0/70'' when it finished (70/70) i was at homescreen and all of my apps that i downloaded when i was using this rom at old days was there.It was so weird, And all aplications started to stop itselves and i even havent touched any of them. Like ''Unfortunately Whatsapp has stopped'' ''Unfortunately contacts has stopped'' ''Unfortunately facebook has stopped'' finally they all stoped working and i tried open applications, No application opened even contacts.
Present state: Only one rom is working, Others staying at boot animation screen and the rom which is working actually not working, Only phone is opening, No application working
What is the Problem? What Should i do? I am waiting your answers, THANKS.
Click to expand...
Click to collapse
Are you do a full wipe, before flashing another custom rom?
I did Wipe data factory reset, Wipe cache partition, Advanced>Wipe Dalvik cache
Talha10 said:
I did Wipe data factory reset, Wipe cache partition, Advanced>Wipe Dalvik cache
Click to expand...
Click to collapse
I suggest you install the stock rom using odin. It seems you have some corrupted files. Before flashing the stock rom, do Format Data/ Factory Reset, Format Cache Partitions, Mount & Storage> Format /system, Wipe Dalvik Cache and Wipe Battery Stats. Once you have flashed the stock rom, go to recovery mod and do Wipe Data/ Factory Reset and Wipe Cache Partition (otherwise bootloop might occur). After that install root and CWM from the recovery mod. Now you can install any other custom rom without any problem. Do post your results. Hope I Helped
When i connect phone to the computer, connecting text under phone logo is occuring in kies, But not connecting
And neither in download mode nor not in download mod odin can't see the phone at all
Talha10 said:
When i connect phone to the computer, connecting text under phone logo is occuring in kies, But not connecting
And neither in download mode nor not in download mod odin can't see the phone at all
Click to expand...
Click to collapse
Uninstall kies, and then download driver for galaxy ace.
Maybe, there is something wrong with your recovery, what recovery do you use?
---------- Post added at 06:03 AM ---------- Previous post was at 06:00 AM ----------
Talha10 said:
When i connect phone to the computer, connecting text under phone logo is occuring in kies, But not connecting
And neither in download mode nor not in download mod odin can't see the phone at all
Click to expand...
Click to collapse
Uninstall kies, and then download driver for galaxy ace.
Maybe, there is something wrong with your recovery, what recovery do you use?
And, try redownload, and flash that rom again. Maybe, it's corrupted.
i unistalled and nothing happened.
And there is no problem about driver because pc is recognizing the phone which means it's was already updated.
ClockworkMod Recovery version is v4.0.0.9
And i flashed many times
Talha10 said:
i unistalled and nothing happened.
And there is no problem about driver because pc is recognizing the phone which means it's was already updated.
ClockworkMod Recovery version is v4.0.0.9
And i flashed many times
Click to expand...
Click to collapse
Try installing CWM 5 from the recovery mod. CWM 5 is much more stable than CWM 4. Once you have installed CWM 5, do Format Data/ Factory Reset, Format Cache Partitions, Mount & Storage> Format /system, Wipe Dalvik Cache and Wipe Battery Stats. Then try to flash any working rom with it. Here is the link,
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Do post your result. Hope I Helped
i did all of the things that you said but result is same
edit: Yeeeesss now i istalled Xperiance-Ace-v4_Sky_Walker_Studios but it wasnt like old instalations, Old applications didn't come.Rom was opened like new phone, There is no problem now, Everything in phone are opening.
But why could'nt i install other roms.Of course i can continue with this rom it's better than none i mean at least i can use phone without problem.It is perfect but if can we solve the problem for other roms it will be very perfect, By the way thank you for your helps
Talha10 said:
i did all of the things that you said but result is same
edit: Yeeeesss now i istalled Xperiance-Ace-v4_Sky_Walker_Studios but it wasnt like old instalations, Old applications didn't come.Rom was opened like new phone, There is no problem now, Everything in phone are opening.
But why could'nt i install other roms.Of course i can continue with this rom it's better than none i mean at least i can use phone without problem.It is perfect but if can we solve the problem for other roms it will be very perfect, By the way thank you for your helps
Click to expand...
Click to collapse
Bro, are you sure you can't install any other rom with CWM 5? Never forget to do Format Data/ Factory Reset, Format Cache Partitions, Mount & Storage> Format /system, Wipe Dalvik Cache and Wipe Battery Stats before you install any other rom. Also click the Thank button to thank us for our time. Do post the results. Hope I Helped
mahithm said:
Bro, are you sure you can't install any other rom with CWM 5? Never forget to do Format Data/ Factory Reset, Format Cache Partitions, Mount & Storage> Format /system, Wipe Dalvik Cache and Wipe Battery Stats before you install any other rom. Also click the Thank button to thank us for our time. Do post the results. Hope I Helped
Click to expand...
Click to collapse
Yes im sure i do all of them always