Database Develop

No bubble mms w/5mb and 2560x1920 limit...

Ok this is a modified Mms.apk with 5mb send/receive limit and also 2560x1920 picture resolution send/receive. I hated being sent high res pics and only being able to save them at 640x480...
you need to go into the Mms settings and under "Custom User-Agent" select "Custom" then enter any name you want for the custom user agent... You might need to restart the messaging app, but I tested it and was able to save at full 2560x1920 ...
I'm going to post the modded Mms as an update.zip to flash with clockwordmod.
It's only been tested on froyo.
you might need to clear messaging data...
settings>applications>manage applications>All>messaging>clear data
let me know if it works for you...

Sorry for the noobness but how do I get to the mms settings? Im using the VIPER froyo rom.
Epic4G+Froyo = TheShizznit

Mr.Muscles said:
Sorry for the noobness but how do I get to the mms settings? Im using the VIPER froyo rom.
Epic4G+Froyo = TheShizznit
Click to expand...
Click to collapse
Sorry i should have explained it better...
Just open the messaging app and press the menu key and go into settings and scroll down till you find "Custom user-agent"...

why dont i see the custom user agent setting? im sure it is just a quick over sight but what am i doing wrong?

Sweet, exactly what I was looking for, thank you!!!
Sent from my SPH-D700 using XDA App

Is there a mod like this for 2.1?
Edit: never mind, I found it.
Sent from my Xtremely Syndicate Epic using Tapatalk

So does this get rid of the bubble type look for texts and reverts it back to normal?

keysoh2 said:
No bubble mms w/5mb and 2560x1920 limit...
Click to expand...
Click to collapse
Scias said:
So does this get rid of the bubble type look for texts and reverts it back to normal?
Click to expand...
Click to collapse
Yes.......

After installing this i cant receive pics anymore. Texts work just fine but mms wont show up. Am i missing a setting?
Sent from my SPH-D700 using XDA App

Mr.Muscles said:
why dont i see the custom user agent setting? im sure it is just a quick over sight but what am i doing wrong?
Click to expand...
Click to collapse
make sure it flashed correctly...
make sure you are in the all threads screen in the messaging app. then hit the menu soft key and go into settings. you need to scroll down, it's towards the bottom... in fact if you scroll all the way down in the settings menu the "custom user-agent" settings will be in the top of the screen...
Hope this helps...

MojoSwag said:
After installing this i cant receive pics anymore. Texts work just fine but mms wont show up. Am i missing a setting?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
I works fine for me...
did you clear data and change the custom user-agent settings?
also try flashing it again or use the sdx stock app remover to push it and replace the current Mms.apk.

dannzeman said:
Is there a mod like this for 2.1?
Edit: never mind, I found it.
Sent from my Xtremely Syndicate Epic using Tapatalk
Click to expand...
Click to collapse
where did you find it. I couldn't see it anywhere..

does this work with any other sms app or just stock?

Okay I got it working, just to clarify how big should the pictures be when I download. Them to my phone?
Epic4G + Froyo = The Shizznit

sinner1168 said:
where did you find it. I couldn't see it anywhere..
Click to expand...
Click to collapse
I didn't, actually. I sort of jumped the gun. Sorry if I got your hopes up.
Sent from my bonsai epic using Tapatalk

I just noticed that my phone doesn't vibrate and play the notification tone on sms with this mms.apk.
I checked the vibrate always option in the settings.
Can someone else with this mms mod please chime in? I am wondering if this is the culprit.

Just you man.
Sent from my SPH-D700 using XDA App

Can we get an edify friendly version please

what is the custom user agent to be set to?

badwolf said:
what is the custom user agent to be set to?
Click to expand...
Click to collapse
I second this question as well! Any help will be appreciated! Thanks!

enable android wifi tethering on rooted at&t Atrix 4G

no need to run any script, or use any 3rd party tethering apps,
juz use Root Explorer, edit
"build.prop" under "system" folder,
find "ro.mot.entitlement_check=true" and change it into
"ro.mot.entitlement_check=false"
restart machine and tht's done, at&t authentication gone, tested and work
if this has been posted before, please remove, thx!

I guess there's really no reason to even add a custom APN with this, right?

Doesn't work for me. Still attempts to check.
Sent from my MB860 using XDA Premium App

Doesn't work for me, but i did something alse:
under my APN, i add "default,tether" in APN type (the last one) and thats it

it said readonly

kumar_r100 said:
it said readonly
Click to expand...
Click to collapse
if you're using root explorer you need to hit the tab near the top that says "Mount r/w" to edit the file.

It worked very great for me, only put default,tether.
Thanks!!!
Sent from my MB860 using XDA Premium App

Easy to do. Thanks.
Sent from my MB860 using XDA App

it works. thanks

Doesn't work on mine.. It prompts me that this takes alot of battery power and uses data then just goes away when i press OK..

sicwan said:
Doesn't work on mine.. It prompts me that this takes alot of battery power and uses data then just goes away when i press OK..
Click to expand...
Click to collapse
turn off wifi..

This works but doesn't show the notification. Could cause people to lose battery life with this...

Bump, works for me on 1.8.3 with Gingerblur
Change the ro.entitlement to false and then add ",tether" next to default on the APN type.
Reboot the phone and enable the hotspot.
You won't get a notification in the taskbar, but just disable it when you're done with it.

hi i have changed. ro.entitlement to flase and reeboted, but it says too much battery and when you press yes it just closes. how is supposed to run when you have it right?

RPK925 said:
hi i have changed. ro.entitlement to flase and reeboted, but it says too much battery and when you press yes it just closes. how is supposed to run when you have it right?
Click to expand...
Click to collapse
Well, if you changed it to "flase", then I'd imagine it not working.
Anyway, there is no "indication" that the hotspot is working, you need to verify that it is working by trying to connect to it via a computer.

jortiz17 said:
Bump, works for me on 1.8.3 with Gingerblur
Change the ro.entitlement to false and then add ",tether" next to default on the APN type.
Reboot the phone and enable the hotspot.
You won't get a notification in the taskbar, but just disable it when you're done with it.
Click to expand...
Click to collapse
1. I would like to know your process of rooting with gingerblur on 1.83
2. I have added false to that line, what do you mean by add tether to what APN?
3. would you have detailed instructions? like step by step vs. this vague info is just hard to follow.

I have had the best luck by simply changing the apn of att tether to "phone" from "broadband" using a SQL editor.
This allows mms and text messing to dynamically chose the correct apn (no manual downloading mms messages) and they icon works.
Sent from my MB860 using XDA App

Works, ty.
sent from MB860

Thanks mate, worked like a charm.
Sent from my MB860 using Tapatalk

atomoverride said:
1. I would like to know your process of rooting with gingerblur on 1.83
2. I have added false to that line, what do you mean by add tether to what APN?
3. would you have detailed instructions? like step by step vs. this vague info is just hard to follow.
Click to expand...
Click to collapse
Those instructions are completely, patently obviously crystalline. You should go google your google os then reread. Seriously, don't ask to be served on a silver platter. Read, understand and ask for specific clarification on a step that confuses you if google and forum search fail you. Rooting is well documented. Get unlazied for that one. Which apn should you consider adding tether to? Probably the one you are using, common sense would dictate. (Further extension of common sense states that you might need to make a new apn that is a copy of your current one with changes for this.)
Mine worked without adding tether to my apn! I don't know that this particular step is necessary. I've downloaded several hundred MB's through my phone on Steam without adding tether to my apn, but YMMV.
Sent from my MB860 using XDA Premium App

[ DIY ]~[ 4.2 - 4.4.x ] How I Enabled 4G LTE on My Nexus 4 (Multi Carrier!)

--- copied with permission from nathanpfry.com ---​
For a Nexus 4 (mako) KitKat ROM with LTE already enabled, check out my work here.
All the other guides I've found are confusing and don't seem to work, when actually it's (sort of) easy and straightforward.
You will need:
1) A rooted Nexus 4 running just about any JB 4.2/4.3 OR 4.4+ Kit Kat ROM.
2) Time and patience.
3) ES File Explorer from the Play Market
4) Baseband .33 or earlier (or the hybrid radios from morrislee) (Don't ask what this means here, do a search in the Nexus forums)
(First Edit: Screencaps soon to come!)
First, we're going to need to edit a couple of files in the root (also known as /) file system. Open ES File Explorer and click the blue icon in the upper left to bring up the options menu. Expand Tools, then scroll down to Root Explorer. Select that and Allow ES File Explorer root permissions with superuser.
Another menu pops up, select Mount R/W and change BOTH from "ro" to "rw". Save that and get back to the file system menu in ES File Explorer. Navigate your way to /system and scroll down to select the file "build.prop" Open that with ES Note Editor and select the options menu in the upper right, and click "Edit".
Scroll approximately 3/4 of the way down through the build.prop file and locate this line of code:
Code:
lteOnCdmaDevice=0
Change that to this:
Code:
lteOnGsmDevice=1
Press the back arrow in the upper left corner of ES Note Editor and it will prompt you automatically to save the file. Click yes.
THIS SECTION IS ONLY FOR T-MOBILE USERS ON 4.2 ROMS. NOT NEEDED FOR 4.3 or 4.4
Cool deal. Except now, because Jellybean changed things around with how Android handles audio, the speaker for voice calls won't work for T-Mobile users (like me). It's OK though, because we can fix that too. Get back to ES File Explorer menu and navigate to /etc/snd_soc_msm/
LONG PRESS on the file in there, snd_soc_msm_2x blahblahblah and click More (the three dots in the lower right hand corner) and select Properties. Remember what the permissions look like! Write it down! Change permissions to rw (check all the boxes in the "read" and "write" column) and save that, going back to the snd_soc_msm folder and press back to deselect it (no check marks next to it).
Single-click on the file to open it, selecting it as a Text file and again opening it in ES Note Editor. You have to scroll down for a WHILE. ES Note Editor only loads the file incrementally (sections at a time). So just keep scrolling. It is line 1804. You are looking for a single line that says:
Code:
ACDBID 81:1
Change that to:
Code:
ACDBID 7:1
Press the upper left back button in ES Note Editor and when it prompts you, save. DO NOT leave the file yet. You should be back to just reading mode. Scroll down some more. We are looking for line 2736. It reads:
Code:
ACDBID 91:2
Make that read:
Code:
ACDBID 6:2
Press back, save, then exit ES Note Editor. You're back into the File Explorer. LONG PRESS on the snd_soc_msm_2xblahblah file and go back to it's properties, reverting the permissions to their original state. Remember I told you to write that down? Good.
END T-MOBILE 4.2 ONLY SECTION
EVERYONE DO THIS NEXT PART
Click the menu button in the upper left corner of ES File Explorer and select Rood Explorer again. Select Mount R/W and return / and /system to Read Only (RO). Save that and back out to your home screen.
Now go to the Phone dialer, as if you were going to make a call. Enter *#*#4636#*#*
A menu will pop up, select Phone Information. Where it says "Set preferred network type", change that to LTE/GSM auto (PRL). Press the Home button to return to your main Android home screen.
The hardest part is done, only a couple more settings. Go to Settings>Wireless and Networks>More...>Mobile networks>Access Point Names and select your carrier, in my instance T-Mobile US, making the following changes (if necessary):
Code:
APN: fast.t-mobile.com
Name it something (the first field) and press the small three dots in the lower right corner to Save the APN. Reboot your N4.
When you are back to the homescreen, navigate back to Settings>Wireless and Networks>More...>Mobile networks and this time select Network Mode. It should say "WCDMA Preferred". Change that to GSM/WCDMA/LTE. NOTE: In KitKat ROMs only, this appears to be unnecessary as 4G will already be selected under "Network Mode".
Wait a minute or so, the signal bar should change from "H/H+" to "4G" (or LTE depending on the ROM). Yay!
Reboot to make sure everything sticks.
You should be set to go!
This may work for other carriers, but please do not ask me for correct APN settings. It only enables LTE on Band 4, this is a limitation of the hardware inside of the phone. Certain carriers do not utilize this band, it's up to you to find out.
Feel free to buy me a coconut water (donate) if you like my work. It would be greatly appreciated!​
Please Hit the "Thanks" Button If This Guide Helped You!

Thanks. Good guide.
Sent from my Nexus 4 using Tapatalk 2

Thanks for the guide.
Here's noob question: can you make this into a flashable file, like a "LTE fix" file? So anytime someone changes a rom they can then just flash the "LTE fix" or something like that?
Thanks again.

This also assumes that the user has flashed an older radio baseband to the phone.
Sent from my Nexus 4 using xda app-developers app

pwc realtor said:
This also assumes that the user has flashed an older radio baseband to the phone.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Good point, I'll make the edit. My phone came with the .33 baseband and I spaced it.

sylentprofet said:
Good point, I'll make the edit. A lot of the custom ROMs seem to be coming with .33 basebands these days and I spaced it.
Click to expand...
Click to collapse
Roms don't come with radios
Sent from my Nexus 4 using Tapatalk 4 Beta

Z-Man™ said:
Roms don't come with radios
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
They can be added.
Sent from my Nexus 4 using xda premium

Here is the lte zip file with the fix you asked for I don't take any credit for the file but I use it every time I flash a rom

[email protected] said:
Here is the lte zip file with the fix you asked for I don't take any credit for the file but I use it every time I flash a rom
Click to expand...
Click to collapse
Just to clarify would the zip you provided adjust the build.prop, fix the audio, set the APN correctly, and select the correct mobile network mode LTE/GSM/WCDMA?
thank you in advance
Sent from my Nexus 4 using XDA Premium HD app

Yes it xoey

Thank you so much !
Thanks guys, made my N4 work on Fido LTE with this, now getting better speeds than with my home WiFi :good:

ploopower79 said:
Just to clarify would the zip you provided adjust the build.prop, fix the audio, set the APN correctly, and select the correct mobile network mode LTE/GSM/WCDMA?
thank you in advance
Sent from my Nexus 4 using XDA Premium HD app
Click to expand...
Click to collapse
I'm pretty sure it's only a build.prop edit, it doesn't include the edit to fix audio and apn

khanh1289 said:
I'm pretty sure it's only a build.prop edit, it doesn't include the edit to fix audio and apn
Click to expand...
Click to collapse
It doesn't you have to do that manually
Sent from my Nexus 4 using Tapatalk 4 Beta

thanks for the post, but I still don't get LTE... maybe my area is not covered?

teraih said:
thanks for the post, but I still don't get LTE... maybe my area is not covered?
Click to expand...
Click to collapse
What area are you in?
Sent from my Nexus 4 using Tapatalk 4 Beta

Used your guide and worked perfectly. Thanks for that. Do we have to do this whole process every time we update/flash a new ROM or Kernel?

mmduluth said:
Used your guide and worked perfectly. Thanks for that. Do we have to do this whole process every time we update/flash a new ROM or Kernel?
Click to expand...
Click to collapse
At the moment, the answer is unfortunately yes.
I'll make a script if I can in my spare time, as the one's I've seen around (including the one mentioned earlier in this thread) don't work exactly right for me. People on other carriers might be OK, but T-Mobile has certain specific changes or it won't work (no voice during calls, network will fluctuate rapidly between H, H+, and LTE).
I'll update the thread with any new developments and screencaps here shortly, just been very busy and very broke.

XupModz said:
What area are you in?
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Im in LA, city of El Monte, should be covered, don't know what might went wrong.

Great directions! But I can't find the ABCID 81:1 line so I can't get past that step! Can someone tell me about what percentage to start looking for it (there's a % bar along the bottom as you scroll through all those lines). Thanks!

Sorry for my noon question... Does this means that you can convert your Nexus 4 to a LTE device? I thought it was a hardware feature..
Sent from my Nexus 4 using Tapatalk 4 Beta

Unwanted Network (Moviestar)

Hello all... In my trying of firmwares, XXLQE, XXLQI, UBLPH, UBLPK, I found on my phone at least, the best battery performance came from the VSLPA firmware. That is branded by Moviestar in Argentina.
My thing is more an irritation than a problem. In my wifi settings when it scans, the Moviestar network is listed and shows out of range. I remove the network manually but it comes back randomly. I want to remove it for ever as I do not think I'll be going to Argentina any time soon (not that don't want to go for sure). I hope someone knows where the network is stored so I can edit it out. Thanks in advance....

Apns are stored in apn.conf file in /system/ etc.
I dont know anything other than that.
Sent from my GT-I9070 using Tapatalk

anantttt said:
Apns are stored in apn.conf file in /system/ etc.
I dont know anything other than that.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Yea, that is a very long list of apn's but it isn't for wifi... just data and the access point names. Thanks tho... the search continues LOL :cyclops:

bobfrantic said:
Yea, that is a very long list of apn's but it isn't for wifi... just data and the access point names. Thanks tho... the search continues LOL :cyclops:
Click to expand...
Click to collapse
Oh i thought you were asking about access point settings of mobile data.
To remove the wifi network you just need to long press the access point and click forget. Doesn't that work??
Attach a screenshot

anantttt said:
Oh i thought you were asking about access point settings of mobile data.
To remove the wifi network you just need to long press the access point and click forget. Doesn't that work??
Attach a screenshot
Click to expand...
Click to collapse
I do that then upon reboot, it reappears LOL... it just won't go away for ever. So I am sure there is some file that can be edited, just haven't found it yet and google isn't a big help this time go figure....

[Q]Samsung internet default home page

I'm attempting to change my default home page on Samsung internet to something else, however whenever I launch it, it goes to Google. Any thing I'm missing? Cheers.

Limeybastard said:
I'm attempting to change my default home page on Samsung internet to something else, however whenever I launch it, it goes to Google. Any thing I'm missing? Cheers.
Click to expand...
Click to collapse
Try closing all your recent tabs. I wasn't able to start on my selected homepage until I did that. Now it works as it should.

Misterxtc said:
Try closing all your recent tabs. I wasn't able to start on my selected homepage until I did that. Now it works as it should.
Click to expand...
Click to collapse
Thanks that was it. Lol. ( Damn newbies , me. )
Sent from my SM-N960U1 using Tapatalk

Misterxtc said:
Try closing all your recent tabs. I wasn't able to start on my selected homepage until I did that. Now it works as it should.
Click to expand...
Click to collapse
Still opening new tabs brings up Google page.
Sent from my SM-N960U1 using Tapatalk

Limeybastard said:
Still opening new tabs brings up Google page.
Sent from my SM-N960U1 using Tapatalk
Click to expand...
Click to collapse
That's odd, a new tab opens my home page. Maybe clear the cache on the app?

Yeah same here. All my new tabs open up to Google, no matter what I have my home page set to. Now if I hit the home button, it goes to my home page. But just opening a new tab, opens up to Google every time.

Why do I have Telekom page on my default page? I didnt buy my note 9 from telekom.

KastrO_on said:
Why do I have Telekom page on my default page? I didnt buy my note 9 from telekom.
Click to expand...
Click to collapse
Maybe it was set by an app or your carrier? Don't know...what's Telekom?

Limeybastard said:
I'm attempting to change my default home page on Samsung internet to something else, however whenever I launch it, it goes to Google. Any thing I'm missing? Cheers.
Click to expand...
Click to collapse
This is because the browser default page and/or the bookmarks can be made persistent by the vendor configuration in the ROM. Unfortunately without rooting and tampering with the XML file, I am not sure how to fix this aside from using an alternate browser.

PulpoRojo said:
This is because the browser default page and/or the bookmarks can be made persistent by the vendor configuration in the ROM. Unfortunately without rooting and tampering with the XML file, I am not sure how to fix this aside from using an alternate browser.
Click to expand...
Click to collapse
Hi , what do i need to edit to change the default page . i have root . thx