Database Develop

Tried going back to stock / stuck at splash screen Rogers Captivate

Hey,
Pretty new to android
I tried flashing back to stock, but I'm having some trouble.
I can get into download mode, odin recognizes my phone.
(Little history: I bricked my phone about a month ago, managed to get it into download mode, and get back to stock)
For some reason right now, when I flashed back the stock rom, I get stuck at the Rogers Splash screen with the red dots going by, then when that ends the screen goes black.
Using a Rogers i896 Captivate, Odin3 - pda is a rogers stock rom i found on here
any help?
thanks

Anyone please help??
I don't know why it goes black after the rogers splash screen
Should I be using anything but pda in odin3??
I don't know why this isn't working, its worked before...
Please help!!

Did you used the pit file and select re-partition? Try flashing again...
sent from.... awaiting location... on my samsung captivate i896 Canadian, eh!

Trusselo said:
Did you used the pit file and select re-partition? Try flashing again...
sent from.... awaiting location... on my samsung captivate i896 Canadian, eh!
Click to expand...
Click to collapse
I just flashed again using your recommendations and same blank screen after a long rogers screen. Any other ideas?

[Q] Scrambled TV-like screen during boot or in CWM Recovery

Hello everybody. First of all, I'm quite new to the whole android world as I got my Galaxy S only three months ago. But I want to take full advantage of it's power so I decided to root it quite quickly. And now I had stumbled upon a problem and had no luck in finding a solution. That's the reason for this thread.
I went through other topics in this forum and it seems no one ever had a problem like this.
I've installed a RomKitchen custom XXJVB rom with Chainfire's kernel (CF Root XW XEE JVB v3.1 CWM3RFS) according to the instructions provided there - I flashed CWM 2.5 with Odin, then updated from CWM Recovery to Gingerbread.
In general, after doing this, everything works fine, the phone got super-fast, no issues there. However, now, during boot the screen displays a TV-like scrambled signal (like white noise... only it isn't white). It's hard to explain so I attached a picture.
It's like the whole screen is covered in coloured pixels. Sometime's a line of pixels moves. A similar thing happens when I try to boot into recovery - it boots but the display is all scrambled. The recovery menu works (when I use the volume buttons the pixels on the screen change their position) but I can't see a thing.
I tried virtually every solution I could think of - I wiped everything, did a factory reset, installed everything again. Still the same. When I revert to stock Froyo 2.2.1 this doen't happen anymore. But I prefer Gingerbread over Froyo.
So, have anyone here seen a similar problem and knows how to fix this? I would be very grateful for any pointers
EDIT: Silly me, guess I haven't searched hard enough :/ It seems I'm missing the new bootloaders.

hardoc said:
EDIT: Silly me, guess I haven't searched hard enough :/ It seems I'm missing the new bootloaders.
Click to expand...
Click to collapse
Yeah, that's it.
Flash JVB stock with bootloader. Load your cooked rom onto internal sd card. Then flash the speedmod kernal in Odin with auto reboot unchecked. Pull the battery, then boot the phone into recovery, and flash your cooked rom.

electrotune1200 said:
Yeah, that's it.
Flash JVB stock with bootloader. Load your cooked rom onto internal sd card. Then flash the speedmod kernal in Odin with auto reboot unchecked. Pull the battery, then boot the phone into recovery, and flash your cooked rom.
Click to expand...
Click to collapse
I am getting this scrambled screen at the beginning of reboot after flash to serendipity VII. My phone will come up fine after the scrambled screen. But I cannot see the cwm page if I selected "recovery". Any help? Is this the bootloader being corrupted? Thx.

hi i do have a same problem in my htc desire hd its not only in boot menu its also have a problem while phone is booted. if i press hardly in the side of the phone its became scrambled,
please help me how to solve this?
htc desire hd
rom - rcmix 3d kingdom v2.0
clockwokmod recovery v.3.0.2.6

Hi guys I'm having similar problem with my galaxy s but my scrambled screen looks different but same thing, phone works but I can't see anything on recovery, please help us out tech God's
Sent from my GT-I9000 using XDA Premium App

steve57925 said:
Hi guys I'm having similar problem with my galaxy s but my scrambled screen looks different but same thing, phone works but I can't see anything on recovery, please help us out tech God's
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Flash this bootloader through odin/heimdall, tick Update Phone Bootloader and click FLASH
http://www.chameleonwebhosting.com/galnetmiui/EZboot-GingerBread-1.0.tar.md5

[Q] Please help! black screen after installing 2.3 gingerbread on my Galaxy TAB

Hi to all
I have a Galaxy Tab 1000N, follow the steps to install the 2.3, but to finish installing the dbdata.tar, the galaxy never restart.
The screen remains totally black, but if I can connect to the pc and using odin. Any suggestions?

Used odin v1.7 then do the same connect ur tab even it 's on a black screen this happen to me

hi
another problem
reinstall the firmware 2.2 P1000NUBJM2, the galaxy started, I can
use it, but pressing the power button to turn off the screen
restarts, each time when press the power button to black screen the galaxy restarts... ... any help?

You can fix this problem by flashing Humberos kernel from this thread
http://forum.xda-developers.com/showthread.php?t=974408
However your boot loader may be locked/signed which will prevent you from installing the kernel, you can however patch your kernel by reading this post
http://forum.xda-developers.com/showthread.php?t=888071
After that flash humberos kernel using ODIN

Well, i tried the above.. and i couldnt figure it out -_-
So i flashed the original firmware while the screen was still blank, and after it restarted the screen came on. But its now stuck at the Samsung Logo.
Files: gt-p1000_mr.pit
PDA: P1000NUBJM2
Phone: modem.bin (extracted from the above firmware)
Where do i go from this point, wish i knew

Found the solution here: nontent.blogspot.com/2011/05/samsung-galaxy-tab-blank-screen-after.html
hope it works for you too

[Q][I9000] Black black black screeeen ;-(

Hi there
I had gingerbread 2.3.4 and Semaphore kernel and I flashed MIUI 2.3.4 then I flashed Glitch from : http://forum.xda-developers.com/show....php?t=1315400
I didn't like glitch because of its bad colors so I decided to reflash my gingerbread rom using odin3.... now odin3 got stock at modem.bin and i had to disconnect my device
my device had a black screen and I tried to flash the same rom and tried other roms from http://forum.xda-developers.com/show....php?t=1102881
but it always stuck on the same place
one froyo was falshed successfully but the screen remained black and the only change happened is that i heard the start up sound but... again a black screeen
I tried to flash rom without "phone" file
it was flashed successfully
bt again I heard the startup sound with a black dead screen
yet the buttons are still lighted
Pleaaaaaaase Help
I tried flashing a wrong rom... now the device can't go in download mode
the usb jig doesn't work
ow even buttons are off
I neeed help...
would i have to take it to samsung Maintenance center?

Can you go in to download mode? If not, your bootloader is pretty much fuc*ed the only solutions i can think of is JTAG
Sent from my GT-I9000 using xda premium

Galaxy Note logo problem

Hi.
Had my Note, a rom and kernel Philz, however i would install the new speed mod kernel, and there was a problem, he start on the samsung logo and when I try to start the cellphone, he hangs on the inicial samsung logo appears and then type pinstripe and goes down. it seems that the screen broke. if i try to enter the cwm or download mode also looks like this. what happened? a mistake?
a screen logo brick ?
sorry about my english . concluding : i try to start my phone, appears the samsung logo and then a "screen broken" and goes down.

Try wiping cache and dalvik
Sent from my GT-N7000 using Tapatalk 2

M_FCPORTO said:
Hi.
Had my Note, a rom and kernel Philz, however i would install the new speed mod kernel, and there was a problem, he start on the samsung logo and when I try to start the cellphone, he hangs on the inicial samsung logo appears and then type pinstripe and goes down. it seems that the screen broke. if i try to enter the cwm or download mode also looks like this. what happened? a mistake?
a screen logo brick ?
sorry about my english . concluding : i try to start my phone, appears the samsung logo and then a "screen broken" and goes down.
Click to expand...
Click to collapse
I am not sure what the problem is, but it seems you flashed an incomplete or incompatible kernel
Try to flash Philz kernel again using Odin, I suppose you can't log onto recovery
if you can't log onto recovery or download modes, I suppose you have a brick issue
refer to samsung repair center