I receive new firmware over Samsung Kies application,and i accidently pull of cable in the middle of flashing.Now my tab is dark.It wont boot or power on.I I searched the forum and find some answers but still i did not find soluitions for my problem. Odin application see my tab on port 0:[COM9] , and i try to flash with different roms but everything i got is this :<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P1000XWJQ8_P1000XXJPZ_P1000DBTJQ1_HOME.tar.md5 is valid.
<OSM> P1000XWJQ8_P1000XXJPZ_P1000DBTJQ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
Then i wait,and wait, nothing happers for hours...
If anyone has tip what to do,I would be very grateful. Tab FCC ID :A3LGTP1000
Thanks in advance!
Try overcome Stock Save v5 method.
There is a long thread in section for Overcome 4.1 ROM.
or head to
http://www.teamovercome.net
follow their guide but you can stop after flashing the Stock Safe from Odin.
Or if you want, you can continue and end up with Overcome custom ROM which is excellent.
The guide has broken image, but follow this link and you will get the cached image copy:
http://forum.xda-developers.com/showthread.php?p=20974872
Thank you very much!!!
Make sure you enter Download Mode (volume+power buttons).
Once you do that, make sure your tab is detected in the COM port of Odin. It should be marked in yellow. Also make sure you use Odin 1.7 (this version works best for the tab!).
The behavior you describe suggests Odin cannot connect to your Tab in download mode!
If all of the above are in order, use the Overcome giude as priyana suggested, it should work fine. And be careful what you flash! Odin is not a toy...
Peace,
C.
Thanks for advice Cheatman,but i can't power on my tab. I can't get downlad mode.But when i connect tab to pc odin recognizes it some port 0:[COM9]
.Should I continue with flashing by the Overcome giude? I can certainly try my tab is dark anyway.
problem solved
"It's Alive!!!!!!!!!!!!!!!!!!!" Thank you very much!!!!! You make me happy !!!
Many thanks to priyana and cheatman!!!!
All the best!!!!
Thank you so very much !
priyana said:
Try overcome Stock Save v5 method.
There is a long thread in section for Overcome 4.1 ROM.
or head to
http://www.teamovercome.net
follow their guide but you can stop after flashing the Stock Safe from Odin.
Or if you want, you can continue and end up with Overcome custom ROM which is excellent.
The guide has broken image, but follow this link and you will get the cached image copy:
http://forum.xda-developers.com/showthread.php?p=20974872
Click to expand...
Click to collapse
Thank you so very much for the " overcome " link - I accidently soft bricked my GT-P1000 and after days of searching the web for a solution I found this post .... and I've just finished downloading and installing - and YES my TAB is alive again !!!!!!
hello,
i have a problem with my gt p1000 - i tried flashing new overcome 4 kernel with odin and heimdall and it did not work.
now the tab cant boot anymore, it only shows a mobile, an exklamation mark and a pc.
i tried flashing kernel with odin 1.85 and odin 1.7; device is being detected (yellow COM display) and all i recieve is the following message:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> zImage
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
anyone has a clue? help would be appreciated!
edit: oh well thanks i already figured it out by myself
sruf said:
hello,
i have a problem with my gt p1000 - i tried flashing new overcome 4 kernel with odin and heimdall and it did not work.
now the tab cant boot anymore, it only shows a mobile, an exklamation mark and a pc.
i tried flashing kernel with odin 1.85 and odin 1.7; device is being detected (yellow COM display) and all i recieve is the following message:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> zImage
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
anyone has a clue? help would be appreciated!
edit: oh well thanks i already figured it out by myself
Click to expand...
Click to collapse
Can you explain how you did it?
I have the same problem with less messages:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I am having issues with galaxy tab p1000. Currently stock on a phone PC logo. Have tried Odin 3 but it stops at all trend succeed 0 failed 1
Added!!
Odin v.3
File analysis..
SetupConnection..
All threads completed. (succeed 0 / failed 1)
Related
Hi Guys,
I got a problem with my Samsung Galaxy S SCH-I909
First I have tried changing it's ROM to a different one. It failed. My SGS won't turn on at all anymore. No phone,!,computer sign at all, BUT CAN still go to the Download mode.
I've tried flashing it again with the ROM for SCH-i909 itself(SCH-i909_DI13). But still it keeps on failing.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Leave CS..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Leave CS..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.rfs
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried doing it with repartition pit 512 and without repartition and to no luck. Does this mean that my phone is totally bricked? Hope somebody can help.
Thank yoU!
I got similar problem on my Galaxy S.
When Odin is on factory.rfs screen on my phone is turning blue and thats all!
Stuck on it.HELP!
I'm having the same problem and haven't been able to find a solution yet. Anyone have any ideas?
Hi
I have now for couple of hours tried to find a solution.. did not suceed. So i hope someone has time to help a bit.
Firstly i've tried to "CF-Root" my galaxy S, but i got the message below.
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I thought maybe it is because of my firmware, so i tried to change the firmware with odin, but got the same message..
I have found people with the same problem, but no answers, so i'm begging for help cause i want to go "darky"
Any known solution to the above?
thanx.
Hi!
When i got the same result, the solution was simple: put my phone to download mode
remal said:
Hi!
When i got the same result, the solution was simple: put my phone to download mode
Click to expand...
Click to collapse
probably a very stupid question but "Download mode" means to enable the "USB Debuging" or am i totally off?
No, it is by turning your phone off, holding volume down, home and power on until you see a yellow triangle. That is download mode.
Don't try it if you have no idea what you are doing. Also, your download mode may not work which might mean it needs to be fixed.
Sent from my GT-I9000 using XDA App
I think it is better to read first (HOW TO section): http://forum.xda-developers.com/showthread.php?t=723596
That is the point: "Several batches of phones that were sold have the download-mode button combo disabled (VolumeDown+Home+Power or alternatively Home+Power on some phones). Check if the download-mode combo works BEFORE flashing!"
speedin said:
Hi
I have now for couple of hours tried to find a solution.. did not suceed. So i hope someone has time to help a bit.
Firstly i've tried to "CF-Root" my galaxy S, but i got the message below.
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I thought maybe it is because of my firmware, so i tried to change the firmware with odin, but got the same message..
I have found people with the same problem, but no answers, so i'm begging for help cause i want to go "darky"
Any known solution to the above?
thanx.
Click to expand...
Click to collapse
i guess your three button download mode works..what you can do at this point is to download a stock rom...if the rom is only a tar file, place it on the PDA with repartition unchecked and no pit file...after flashing the stock rom, flash the CF Root with unchecked repartition and no pit...place the CF Root tar file on the PDA...that's it...place darky's in your sdcard and flash via CWM
Also make sure no part of Samsung Kies is running (use ctrl alt del and check for it running in the background) as I tried odin after using Kies and had this problem until checking this and rebooting
Sent from my GT-I9000 using XDA App
Thnx for all the responses.
@ jaju123
So that's called download mode, did not know that, ive been there before just did not know that it was called DL Mode
never mind, thnk you, i have now FW 2.2.1...
now the next step is the CF Root and after that i will become darky
always think before you act, is a good thought to take with you from this piont in your quest for the darky !
That is to late.. ive already become darky.though i miss my danish t9 dictionary with samsung/gingerbread keyboard.. The once in the market are not the best.. Is it possible to take out a t9 dictionary from a standard samsung FW and put it in the darky i use now
Sent from my GT-I9000 using XDA App
Same issues
Hi there,
I'm look the solution for this everywhere. I got no idea which one I'm wrong.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I have been try around a week. I'm using KH3_modem_s2_+_ODIN\modem.bin. Izzit correct? Plz do help me
hafees89 said:
Hi there,
I'm look the solution for this everywhere. I got no idea which one I'm wrong.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I have been try around a week. I'm using KH3_modem_s2_+_ODIN\modem.bin. Izzit correct? Plz do help me
Click to expand...
Click to collapse
had the same issue... in case you are still curious, I got it working by unplugging and replugging the usb cable (with odin running)
speedin said:
Hi
I have now for couple of hours tried to find a solution.. did not suceed. So i hope someone has time to help a bit.
Firstly i've tried to "CF-Root" my galaxy S, but i got the message below.
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I thought maybe it is because of my firmware, so i tried to change the firmware with odin, but got the same message..
I have found people with the same problem, but no answers, so i'm begging for help cause i want to go "darky"
Any known solution to the above?
thanx.
Click to expand...
Click to collapse
Just shutdown your laptop or computer
Triskite said:
had the same issue... in case you are still curious, I got it working by unplugging and replugging the usb cable (with odin running)
Click to expand...
Click to collapse
this worked for me
NONE of these "solutions" worked for me. NOT even unplugging and plugging it back in
Can someone provide a *working* solution?
Arceist Justin said:
NONE of these "solutions" worked for me. NOT even unplugging and plugging it back in
Can someone provide a *working* solution?
Click to expand...
Click to collapse
you should use old version of odin
you use new version of odin?
new version doesnt support
Tuesday, August 18, 2015
I just upgrade my Samsung Galaxy Tab 3V from 4.4.4 Kitkat to 5.0.2 (S6 ROM)
And it says:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Well, how can I do this???
Hello XDA,
I think I messed up my phone pretty bad. Firstly, I tried putting in CWM kernel, my device was at 2.2.? that time and it was a 2.3 kernel. Device wouldnt boot, tried installing some 2.2 kernels but that simply didn't work (with Heimdall).
I tried installing I9000XWJVH_ODKJV3_XXJVO with Odin. It managed to get to the Galaxy S video but not any futher. And this is where it starts to get strange; I ticked "Phone Bootloader update" and "Phone ESF clear" and right now it has a black screen... but all the sound is working, and I still can get into download mode.
Ive tried most things, but without succes. Does any of you have an idea?
edit: so after 10 minutes of pretending to be dead, it resurrected. I tried rebooting (the fw was 2.3.3 and kernal was something rooted) to install CWM but now it wont respond anymore?
If you can access Download mode with 3-buttons combo you can odin-flash a stock rom (JVT for example), reboot and flash a custom kernel to have root and CWM recovery.
http://forum.xda-developers.com/showthread.php?t=1134975
cabessius said:
If you can access Download mode with 3-buttons combo you can odin-flash a stock rom (JVT for example), reboot and flash a custom kernel to have root and CWM recovery.
Click to expand...
Click to collapse
Problem is that I cant acces the CWM. Well, atleast I can't see it. I tried flashing CWM on it, Heimdall said it went OK. When I boot, I get a black screen, hear the boot music and see the touchbuttons lit up. The only thing that wont respond is the screen, I can only to get it to work when I check my pit using Heimdall fronted and let that program reboot my device.
OK, the result:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9000XXJVR_CL425308_REV03_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVR_REV_00_CL1044379.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> Sbl.bin
<ID:0/008> param.lfs
<ID:0/008> factoryfs.rfs
<ID:0/008> dbdata.rfs
<ID:0/008> cache.rfs
<ID:0/008> zImage
<ID:0/008> modem.bin
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008>
<ID:0/008> Receive Response form LOKE
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
Does anyone have a clue?
Still noone has a clue?
Do like above poster said and try to access download mode, done by either volume down, home, power, all together or by using a jig if that doesnt work. Even if you screen is not displaying anything hook it up to odin and see if odin detects it. Youll know if it does because a com port will turn yellow. If it does flash back to stock and repartition with 512pit.
hi guys,
my phone doen't work anymore..
when i press the power button nothing happens.
when i try to get into odin mode nothing happens.
when i plug in usb cable nothing happens.
its totally dead.
anyone idea what i can do?
or shall i send it to samsung?
thanks
lol4it said:
hi guys,
my phone doen't work anymore..
when i press the power button nothing happens.
when i try to get into odin mode nothing happens.
when i plug in usb cable nothing happens.
its totally dead.
anyone idea what i can do?
or shall i send it to samsung?
thanks
Click to expand...
Click to collapse
What exactly did you do to arrive at that point?
Sent from my GT-N7000 using Tapatalk 2
tried to flash using odin 1.85
ehmmm maybe try to charge battery. And sometimes phone works but screen isnt, try to go in download mode and to check is it connecting to odin even if screen is black ;D gl
batterie is charged.
already tried everything i know
i dont think so that after flashing with 1.85 odin you would get hard brick, i think that you messed up with files in not right sections and baam- brick :/
yes youre right
i just plugged into my pc and windows is searching for samsung mobile usb composite device drivers..
and now finaly odin found it too
i think i just paniced too hard...
where can i get a original firmware?
lol4it said:
yes youre right
i just plugged into my pc and windows is searching for samsung mobile usb composite device drivers..
and now finaly odin found it too
i think i just paniced too hard...
where can i get a original firmware?
Click to expand...
Click to collapse
www.sammobile.com all official firmwares ;D
ok gonna try:
GT-N7000 N7000XXLPY 4.0.3 2012 May N7000OXALPY Open Germany Download Unlock
(got vodafone germany)
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
lol4it said:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
you extracted zip file? you need to put .tar file at PDA ^^
ok
now my pc find my phone as unknown device -.-
and odin nothign..
ok worked now:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> zImage
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
but when i press power button still black screen??
EDIT: do i have to change standard settings like re-partition or flash lock?
lol4it said:
ok worked now:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> zImage
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
but when i press power button still black screen??
EDIT: do i have to change standard settings like re-partition or flash lock?
Click to expand...
Click to collapse
i didnt change settings like re-partition and etc. You fcked up something, a lot of people flashed without problems
yes i know =(
but i dont think my screen is broken..
wtf is this?? someone must help me
i got sound and everthing but dat screen is BLACK
Sorry mate phone had dont suppose u would sell as need screen for mine as drop it
Sent from my GT-N7000 using xda premium
Tried to flash aokp jb 4.1.2 milestone1 rom on my galaxy note ics 4.0.4.Launched cwm recovery mode and wiped data,which went off fine but when I flashed the aokp milestone 1 rom the whole thing stuck for few minutes and suddenly the screen went blank.I waited long hoping it would restart... but it didnt.Opened the battery,reinstall it and tried to switch on but failed..I also tried to launch the Cwm recovery ,also tried the download mode but the phone refused to start.... please help....
dead battery?
nokiamodeln91 said:
dead battery?
Click to expand...
Click to collapse
No... I charged the phone before proceeding....it was around 90-95% when I started....!!!
Hi,
my girlfriend just came back from China with a P1000 from her friend. As the whole device was running on chinese language and for some strange reason it was not possible to enter System Setting to change the language, I decided to flash her the latest firmware and just make a fresh start. (i'm a flash veteran on my SGS since 2 years, so I know how to use Odin)
I downloaded the P1000XWJQ8 from Sammobile, fired up Odin and flashed the new ROM with repartition enabled.
The procedure went through without errors:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P1000XWJQ8_P1000XXJPZ_P1000DBTJQ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> cache.rfs
<ID:0/003> hidden.rfs
<ID:0/003> modem.bin
<ID:0/003> factoryfs.rfs
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/003> Added!!
At the end of it the device didn't auto-boot as expected, it just stayed there with a black screen!!!!!!
Disconnecting and reconnecting it triggers in Odin the REMOVED and the ADDED lines but nothing happens.
I cannot switch on, cannot go into download nor recovery, the device just seems to stay dead :-(
My next idea was trying to pull the battery but apparently the battery is glued to the casing, so before I do more damage, I better start asking here.
Hope someone can help, my girlfriend will kill me if I can't repair this damn thing...
EDIT: after having closed Odin on the PC I tried to connect the device again and it started to play the startup song and Win7 started to install the new drivers from the new firmware. 7 out of 9 found drivers installed correctly, 2 instead failed.
But nothing changed to the vegetarian state of the P1000
EDIT 2: now, after 12 hours wait, the device doesn't do anything anymore when I connect it to the PC, no USB connect, no sign of adding it in Odin. It seems like the charging mechanism doesn't work anymore either. The deivce appears totally dead.
Did you see my thread http://forum.xda-developers.com/showthread.php?t=1769144? This problem is totally the same as mine.
Is yours rooted? Coz it says here http://www.teamovercome.net/p1000/?page_id=17 that :
[REQUIRED FOR FROYO-BASED TABS ONLY:] Your Tab must be rooted. (Please look for SuperOneClick root method as it’s usually the safe bet! But for more information on rooting, please refer here: http://forum.xda-developers.com/showthread.php?t=812367)
Click to expand...
Click to collapse
I hope someone can help us, or else, no choice but to bring this to service center.
itenos said:
Hi,
my girlfriend just came back from China with a P1000 from her friend. As the whole device was running on chinese language and for some strange reason it was not possible to enter System Setting to change the language, I decided to flash her the latest firmware and just make a fresh start. (i'm a flash veteran on my SGS since 2 years, so I know how to use Odin)
I downloaded the P1000XWJQ8 from Sammobile, fired up Odin and flashed the new ROM with repartition enabled.
The procedure went through without errors:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P1000XWJQ8_P1000XXJPZ_P1000DBTJQ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> cache.rfs
<ID:0/003> hidden.rfs
<ID:0/003> modem.bin
<ID:0/003> factoryfs.rfs
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/003> Added!!
At the end of it the device didn't auto-boot as expected, it just stayed there with a black screen!!!!!!
Disconnecting and reconnecting it triggers in Odin the REMOVED and the ADDED lines but nothing happens.
I cannot switch on, cannot go into download nor recovery, the device just seems to stay dead :-(
My next idea was trying to pull the battery but apparently the battery is glued to the casing, so before I do more damage, I better start asking here.
Hope someone can help, my girlfriend will kill me if I can't repair this damn thing...
EDIT: after having closed Odin on the PC I tried to connect the device again and it started to play the startup song and Win7 started to install the new drivers from the new firmware. 7 out of 9 found drivers installed correctly, 2 instead failed.
But nothing changed to the vegetarian state of the P1000
Click to expand...
Click to collapse
MarlX said:
Did you see my thread http://forum.xda-developers.com/showthread.php?t=1769144? This problem is totally the same as mine.
Is yours rooted? Coz it says here http://www.teamovercome.net/p1000/?page_id=17 that :
I hope someone can help us, or else, no choice but to bring this to service center.
Click to expand...
Click to collapse
hey guys, are sure your gtab is P1000??
see the back cover, and chek your gtab model to make sure.
qm4n76 said:
hey guys, are sure your gtab is P1000??
see the back cover, and chek your gtab model to make sure.
Click to expand...
Click to collapse
Yes, 100% sure, my one is a P1000. As wrote in EDIT2 my device now seems to be totally dead