Database Develop

N7000 (drive sec s5pc210 test B/D)

HI
I have got my friends Note N7000 when I connect it to my computer I get the following message
drive sec s5pc210 test B/D
I have been unable to do any thing to the phone
will not power no
unable to get into flash mode
no charging light
when i connect it to the computer i get the following message sec s5pc210 test B/D

mega hard brick

http://forum.xda-developers.com/lg-l90/general/how-to-unbrick-hardbricked-phone-t3100163
fixed

TreQUS said:
i cant turn on my phone.
only have a black screen
I just want to install cyanogen and flash aboot and cwm and i rebooted to recovery.
DBI Apps Watchdog Reset
DmiGod Crash Handler: DBI Apps Watchdog Reset
Option: SD card ram dump mode.
Push below files to sdcard before test.
rdcookie.txt, rtcookie.txt
Please do following action
1) Ram dump Mode. Please connect USB.
2) Get the ram dump image using QPST Configuration.
3) If sdcard ram dump enabled just wait for reboot.
4) Collect ramdump files from your pc to sdcard.
5) Send e-mail to [email protected]
WHAT?!!!!!!!!!!!!!!!!
If i connect my phone to pc i see partition with image, verinfo folder.
I have lg d405n with 20a soft (5.0).
Help please
40 views.
guys c'mon
Click to expand...
Click to collapse
if you laptop can detect you phone then flash kdz again

4peace1 said:
if you laptop can detect you phone then flash kdz again
Click to expand...
Click to collapse
16:55:28 : 1 - Normal connect success
16:55:28 : 2 - Emergency connect success
16:55:28 : Phone Mode(1)
16:55:28 : *****GetPhoneType Start*****
16:55:36 : You can't continue the upgrade due to errors.\nFollow the order: (1)Separate the USB cable and battery from the phone; (2)Connect the battery; \n(3) Connect the USB cable to the phone.\n(4)Press the power button on the phone for 3~5 seconds. When the phone is on,\npress the '[Restart]' button for upgrade.\nGo to LG Mobile home and read notices about upgrades.\nTo finish the upgrade, press the 'Finish' button. (_CheckPhoneType() Error)
16:55:36 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
16:55:36 : Page_Error şÎşĐŔÔ´Ď´Ů
16:55:36 : ż©±â´Â Retry şÎşĐŔÔ´Ď´Ů
16:55:36 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate

TreQUS said:
16:55:28 : 1 - Normal connect success
16:55:28 : 2 - Emergency connect success
16:55:28 : Phone Mode(1)
16:55:28 : *****GetPhoneType Start*****
16:55:36 : You can't continue the upgrade due to errors.\nFollow the order: (1)Separate the USB cable and battery from the phone; (2)Connect the battery; \n(3) Connect the USB cable to the phone.\n(4)Press the power button on the phone for 3~5 seconds. When the phone is on,\npress the '[Restart]' button for upgrade.\nGo to LG Mobile home and read notices about upgrades.\nTo finish the upgrade, press the 'Finish' button. (_CheckPhoneType() Error)
16:55:36 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
16:55:36 : Page_Error şÎşĐŔÔ´Ď´Ů
16:55:36 : ż©±â´Â Retry şÎşĐŔÔ´Ď´Ů
16:55:36 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
Click to expand...
Click to collapse
Can you go into download mode by press volume up only and plug your phone into your pc (hold it till you see download mode)

4peace1 said:
Can you go into download mode by press volume up only and plug your phone into your pc (hold it till you see download mode)
Click to expand...
Click to collapse
I Say download mode not working (black screen)

TreQUS said:
I Say download mode not working (black screen)
Click to expand...
Click to collapse
me too, i'm without words....
help!!!

TreQUS said:
I Say download mode not working (black screen)
Click to expand...
Click to collapse
I'm telling you what i did when i was in your situation.
I had black screen too and twice i sent it to LG care custom,which they repaired with warning on second repair.
Then,i flash twrp on unlock bootloader brick it again as usual,having try all method without success.
One day i was just pissed off using the flashtool 2014,i didnt attach my phone until when its require me to attach my phone thru Usb and press continue,then i removed my battery put it back,i pressed Volume+ only and plug in usb into my phone,surprisingly download mode instruction came up and i just still hold the volume+ key until i got to download mode proper.The rest is history now bcos since then i have brick my phone almost everyday now.
Note; i always use kitkat kdz 10d as lollipop dont give me desire result.
but if that didnt work,please take it to LG care centre

for me doesn't work...

I do not have 2 screws
broken screen XD
@edit
computer cant detect l90's
lol help

i managed to get it in firmware update
4peace1 said:
I'm telling you what i did when i was in your situation.
I had black screen too and twice i sent it to LG care custom,which they repaired with warning on second repair.
Then,i flash twrp on unlock bootloader brick it again as usual,having try all method without success.
One day i was just pissed off using the flashtool 2014,i didnt attach my phone until when its require me to attach my phone thru Usb and press continue,then i removed my battery put it back,i pressed Volume+ only and plug in usb into my phone,surprisingly download mode instruction came up and i just still hold the volume+ key until i got to download mode proper.The rest is history now bcos since then i have brick my phone almost everyday now.
Note; i always use kitkat kdz 10d as lollipop dont give me desire result.
but if that didnt work,please take it to LG care centre
Click to expand...
Click to collapse
i managed to get it on firm ware upadate lg support tool tells me that i have an update but when i try to do it it says that i lack space to get tha upadate.did u had the same issue?

makhss said:
i managed to get it on firm ware upadate lg support tool tells me that i have an update but when i try to do it it says that i lack space to get tha upadate.did u had the same issue?
Click to expand...
Click to collapse
How you start lg support tool?!

TreQUS said:
i cant turn on my phone.
only have a black screen
I just want to install cyanogen and flash aboot and cwm and i rebooted to recovery.
DBI Apps Watchdog Reset
DmiGod Crash Handler: DBI Apps Watchdog Reset
Option: SD card ram dump mode.
Push below files to sdcard before test.
rdcookie.txt, rtcookie.txt
Please do following action
1) Ram dump Mode. Please connect USB.
2) Get the ram dump image using QPST Configuration.
3) If sdcard ram dump enabled just wait for reboot.
4) Collect ramdump files from your pc to sdcard.
5) Send e-mail to [email protected]
WHAT?!!!!!!!!!!!!!!!!
If i connect my phone to pc i see partition with image, verinfo folder.
I have lg d405n with 20a soft (5.0).
Help please
40 views.
guys c'mon
Click to expand...
Click to collapse
Try BoardDiag,I cant show you picture because my emmc is probably fried.Is it show as Qualcomm Download mode or something related to that?

androidvillage said:
Try BoardDiag,I cant show you picture because my emmc is probably fried.Is it show as Qualcomm Download mode or something related to that?
Click to expand...
Click to collapse
how to use this boarddiag, flash?

makhss said:
i managed to get it on firm ware upadate lg support tool tells me that i have an update but when i try to do it it says that i lack space to get tha upadate.did u had the same issue?
Click to expand...
Click to collapse
nope
try flash another kdz if you re on let say v20a you can use kitkat
more if you r on
v10a look for higher version
v20b look for lower version
and always select CSE not normal on flashtool if you brick your phone

4peace1 said:
nope
try flash another kdz if you re on let say v20a you can use kitkat
more if you r on
v10a look for higher version
v20b look for lower version
and always select CSE not normal on flashtool if you brick your phone
Click to expand...
Click to collapse
stuck at 4%
and got error

TreQUS said:
stuck at 4%
and got error
Click to expand...
Click to collapse
4% at where,on phone or flashtool

4peace1 said:
4% at where,on phone or flashtool
Click to expand...
Click to collapse
hmm...
flashtool??????

TreQUS said:
hmm...
flashtool??????
Click to expand...
Click to collapse
if phone % did not stop then dont touch it,when it reaches 100 it will boot

TreQUS said:
how to use this boarddiag, flash?
Click to expand...
Click to collapse
Well,seems you need a tot file for this,For this,find it in 4pda or something...Also,
http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830
this guide could help.

mega hard brick lg l90 d410
me to have the same problem... watchdog,purple screen. i switched off my phone now its not switching on pls help

Doogee x5pro dead ??

hi!
i have a doogee x5pro and after an update got a boot loop
tried to flash stock rom downladed on neeedrom.com and now my prone is totaly dead ,doesnt start at all
doest not get recognized by pc at all if i dont pres up button (battery removed ,with battery in phone nothing hapens ) and than it conect for 10-15 sec and disconect again and i cant flash with sp flash tool because it says "BROM ERROR S_FT_ENALE_DRAM_FAIL (0xFC0)
[EMI] Enabe DRAM Failed!
[HINT]:
Please check your load matches to your target which is to be downloaded."
im totaly a noob and dunno what to do please help me
(sorry if bad engish im form Albania)

[3T]Using MsmDownloadTool V3.0.6 flashing OnePlus3T_28_A.23_161027 has an error

Today,I Using MsmDownloadTool V3.0.6 flashing OnePlus3T_28_A.23_161027 has an error : sahara protocol download failed, please power outage phone and try again.
The Qualcomm dirver is OK, right display 9008 COM1 port on my pc.
Most of friends send their phone to OnePlus.com to repair,but i cannot.I just want to try by myself.
So what should I do ?Thanks a lot!
Eh~I forget something:
I use win7 32' & 64' in my VMware Workstation.
As well as I have one question about this flash way : which files will be flash?
This is my Verify File：
dynamic_nvbk.bin: OK
emmc_appsboot.mbn: OK
gpt_backup0.bin: OK
gpt_main0.bin: OK
userdata.img: OK
rawprogram0.xml: OK
NON-HLOS.bin: OK
rpm.mbn: OK
static_nvbk.bin: OK
tz.mbn: OK
boot.img: OK
cache.img: OK
persist.img: OK
recovery.img: OK
system.img: OK
So, are these files will be flash?Maybe I can flash it by myself with command : fastboot flash xxx xxx.xxx
Alright？

Try to reboot your computer, reinstall the driver, use diffrent USB Port, diffrent USB cable, or even a diffrent computer.
I encountered this issue a couple of times and solved it by rebooting my PC or using a different USB port.

Try to hold the power up button the whole process this worked for me

weihan1102 said:
Try to reboot your computer, reinstall the driver, use diffrent USB Port, diffrent USB cable, or even a diffrent computer.
I encountered this issue a couple of times and solved it by rebooting my PC or using a different USB port.
Click to expand...
Click to collapse
Thank u for your reply.
Actually I did this just now expect use different usb cable and computer ,I just have one usb cable and computer >_<...........
So thank u so much again,maybe I can use my friend's computer and usb cable.^_^

CroW_D said:
Try to hold the power up button the whole process this worked for me
Click to expand...
Click to collapse
Yup,I tried it but not work on my phone.
Hi bro,thanks a lot!

M4CH0 said:
Yup,I tried it but not work on my phone.
Hi bro,thanks a lot!
Click to expand...
Click to collapse
Kind of confused now did it worked my way ?.

CroW_D said:
Kind of confused now did it worked my way ?.
Click to expand...
Click to collapse
No , I did it , just have same result : the driver is OK and sahara protocol download faild either.

M4CH0 said:
No , I did it , just have same result : the driver is OK and sahara protocol download faild either.
Click to expand...
Click to collapse
I can't help you much but I know it is your computer's fault, I changed my computer 2 times before going back to the first one and it worked! Which was odd. I did restart the computer after some sort of windows update. If possible take out your mouse or keyboard USB and plug your phone in those. Not much help, sorry.

ExjeetzZ said:
I can't help you much but I know it is your computer's fault, I changed my computer 2 times before going back to the first one and it worked! Which was odd. I did restart the computer after some sort of windows update. If possible take out your mouse or keyboard USB and plug your phone in those. Not much help, sorry.
Click to expand...
Click to collapse
You are so kind.As I think it was my computer's problem too .I decide try it on other computer .I just use Linux on my PC ,you know all of this operation I did it on my VM.

Completely turn of your phone by holding power button for 40 seconds. Then press volume up button for 10 seconds and proceed further..
It helped me.
Sent from my OnePlus3T using XDA Labs

rahulrs0029 said:
Completely turn of your phone by holding power button for 40 seconds. Then press volume up button for 10 seconds and proceed further..
It helped me.
Click to expand...
Click to collapse
Thanks bro.I'll try it next time.

rahulrs0029 said:
Completely turn of your phone by holding power button for 40 seconds. Then press volume up button for 10 seconds and proceed further..
It helped me.
Sent from my OnePlus3T using XDA Labs
Click to expand...
Click to collapse
Thank you so much bro, I use your method to solve this problem quickly, much kind of you, and I told others this method to solve their problems.:good:

M4CH0 said:
Thank you so much bro, I use your method to solve this problem quickly, much kind of you, and I told others this method to solve their problems.:good:
Click to expand...
Click to collapse
Sent from my OnePlus3T using XDA Labs

Thank
Bro.
I want to solution
MsmDownloadTool ''show Connect Timeout!''

linesouth.fone said:
Bro.
I want to solution
MsmDownloadTool ''show Connect Timeout!''
Click to expand...
Click to collapse
Sorry for late reply.. issue solved?

M4CH0 said:
Today,I Using MsmDownloadTool V3.0.6 flashing OnePlus3T_28_A.23_161027 has an error : sahara protocol download failed, please power outage phone and try again.
The Qualcomm dirver is OK, right display 9008 COM1 port on my pc.
Most of friends send their phone to OnePlus.com to repair,but i cannot.I just want to try by myself.
So what should I do ?Thanks a lot!
Eh~I forget something:
I use win7 32' & 64' in my VMware Workstation.
As well as I have one question about this flash way : which files will be flash?
This is my Verify File：
dynamic_nvbk.bin: OK
emmc_appsboot.mbn: OK
gpt_backup0.bin: OK
gpt_main0.bin: OK
userdata.img: OK
rawprogram0.xml: OK
NON-HLOS.bin: OK
rpm.mbn: OK
static_nvbk.bin: OK
tz.mbn: OK
boot.img: OK
cache.img: OK
persist.img: OK
recovery.img: OK
system.img: OK
So, are these files will be flash?Maybe I can flash it by myself with command : fastboot flash xxx xxx.xxx
Alright？
Click to expand...
Click to collapse
Don't use a virtual machine as it doesn't automatically pass all devices through. I had a similar problem until i used a standard windows pc

Realme C15 How to fix bootloop !!!

After lock bootload i got bootloop and Show :
Red state "restart every 5 second"
can't go to recovey or turn off
it only restart
I tried SP flash tool but got error as soon as click download. And error is ;
ERROR: STATUS_BROM_CMD_SEND_DA_FAIL_(OxC0060003).
another thing i noticed is when phone is usb connected i keep hearing sound for usb conenct and disconnect every 10 seconds.
looks like phone is not connecting well to PC.
I installed all posisble drivers for win 10. I installed mediatek driver, Oppo, Realme drivers etc
Please please please HELP Meee

Hint: Replace in this thread's title "Help Pleaseeeeee" by "How to fix bootloop"

thankx2u said:
After lock bootload i got bootloop and Show :
Red state "restart every 5 second"
can't go to recovey or turn off
it only restart
I tried SP flash tool but got error as soon as click download. And error is ;
ERROR: STATUS_BROM_CMD_SEND_DA_FAIL_(OxC0060003).
another thing i noticed is when phone is usb connected i keep hearing sound for usb conenct and disconnect every 10 seconds.
looks like phone is not connecting well to PC.
I installed all posisble drivers for win 10. I installed mediatek driver, Oppo, Realme drivers etc
Please please please HELP Meee
Click to expand...
Click to collapse
Try to format your bootloader using sp flash tool and reflssh it