Related
Hello guys!
Firstly, sorry to be asking this, but I'm desperate and have tried a lot about this subject, but could not solve the problem.
I'm from Brazil, do not speak English very well, but I'll try anyway.
I tried to update my Galaxy S I9000B for Android 2.3.3 and I do not disable the lagfix, now the device is stuck on the screen with the name "Galaxy S", and I can not reset the device to factory settings (I think it is because of lagfix, error: E:Can't mount /dev/block/st110
E:copy_dbdata_media:Can't mount DBDATA.
I wonder if there is as I restore the partition to be able to relive my Galaxy S.
If possible, please send me some procedure.
Thank you all!
Think you need to flash again from scratch with Odin with partition enabled
Sent using TCP/IP
I think that flashing again with Odin is the best way..why don't you update your phone with the 2.3.4 or 2.3.5 with Odin?
Put it on Download mode:
when your device is turned off keep pushing vol+,menu button and power button!
After that flash a firmware with Odin,connecting your device with the USB cable to the pc on download mode!
It's easy
Now it works!
I used these files:
“I9000XXJP2-REV03-PDA-CL464213.tar
“MODEM_I9000XXJP2.tar
“GT-I9000-CSC-MULTI-OXAJP2.tar”
But, now, it is very slow and doesn't enter in download mode.
What I have to do now?
OK, Download and Recovery Mode works again.
But I don't know what is the files that I have to download and use in Odin to resolve the problem of lagfix.
Galaxy S Model i9000B.
I need PDA, PHONE and CSC files.
Help me plz!
Spend some time reading these forums regarding firmware versions. You don't need help, you need to help yourself.
Sent from my GT-I9000 using xda premium
You have to install a custom kernel(like Speedmod for example) to enable lagifix
Here man I think this is the thread you should be looking in. The official Gingerbread firmware for your phone is in the first post. Doesnt look like the same firmware you just posted. Read, Read, Read. http://forum.xda-developers.com/showthread.php?t=919219&highlight=i9000b
---------- Post added at 09:31 AM ---------- Previous post was at 09:25 AM ----------
Here check this link too...looks like a pretty decent mod for your phone once you get back to stock firware. http://www.movilmaniaco.com/android/100-gingerbread-mod-v31-firmware-234-para-los-galaxy-s-i9000b
---------- Post added at 09:57 AM ---------- Previous post was at 09:31 AM ----------
You might even try using a JVT pda with the phone and csc from the first link, then flash a cf-root and add the ext 4 addon for lagfix.
Hey, I tried rooting using fugumod for galaxy S http://forum.xda-developers.com/showthread.php?t=1010141 I went into download mode, installed fugumod, then went into download mode again, and put on my kernel. It all started up fine, but before I got a chance to see if I was rooted, it restarted. It keeps doing this. I know I'm not bricked, i can get into recovery and download fine, but what can i do to fix this problem?
What firmware are you currently running? JVT? Did you try to root with a JVT kernal? Go back into Download mode and root with a kernal that is made for your firmware.
Helpful links:
Firmware
http://forum.xda-developers.com/showthread.php?t=1102881
Root kernals
http://forum.xda-developers.com/showthread.php?t=1112908
http://forum.xda-developers.com/showthread.php?t=788108
I'm in Australia, and I have the JVK firmware.
Usin Odin Upgrade your PDA to JVT, use the JVK Modem and CSC, repartition with 512pit. Flash one of the root kernals in the above links in the PDA section of Odin. Now you will have JVT and option to use many custom roms...or just keep it on stock JVT.
Edit: I think the most recent modem upgrade for Austrialia is XXJVQ and CSC is VAUJV6. See firmware link above.
JVK is European. Youll most likely have better cell coverage if you use the modem and csc above. Flash with JVT PDA
Do you know where to find JVK modem and csc?
Its all in Firmware Link.
Download the first download under Europe JVT 2.3.5...use only the PDA. You have to unzip it after you download it.
Dont use JVK if your in Australia...it will work but cell coverage most likely sucks.
Download the first download under Australia/NewZealand....it has the current Modem and CSC you should use. Unzip it and you will have your modem and csc
Put these in Odin with a 512pit....under how to Flash on the same link you will see a link for Odin with Pit files.
Sorry for my inexperience, but what is a 512pit?
Edit: You also said to download JVT 2.3.5. I'm on 2.3.3, does this matter?
No worries....You can download the odin and pit files on same link...its right below how to flash...there is a link.
So remember you want to flash
XXJVT in PDA
SRJV1 in MODEM XXJVQ will work but seems like SRJV1 is recommended in Aus i9000 thread
VAUJV6 in CSC
512 pit in PIT
After flash, go into recovery and wipe data reset, wipe cache partition, and wipe Dalvik Cache.
Reboot, power down, back to Download mode flash either of the root kernals from links in first post. Flash in PDA.
When done you will have rooted phone with current JVT PDA with your proper modem and CSC.
EDIT :When your done you will be on 2.3.5 JVT more current and many more options for using custom roms.
---------- Post added at 06:50 PM ---------- Previous post was at 06:34 PM ----------
Found this....after reading the austalia i9000 thread...this is the best modem to use...http://forum.xda-developers.com/showpost.php?p=14273164&postcount=4
Seems like guys in Aus...are recommending this Modem...SRJV1
I did all that, now my phone just isn't turning on...
Edit: I just got into download mode, so i'm not bricked...
Edit 2: I installed Semaphore kernel, And i say reboot system now, it goes straight back to clockwork? Does that mean i don't have a rom?
If your flashing the files in the right spots in Odin ...the files I suggested above then everything should work fine....go to the i9000 australia thread and ask if the configuration I suggested should work.
GL
So will Cyanogen work with this if i put it on a sd card and flash it in recovery?
rytro1 said:
I did all that, now my phone just isn't turning on...
Edit: I just got into download mode, so i'm not bricked...
Edit 2: I installed Semaphore kernel, And i say reboot system now, it goes straight back to clockwork? Does that mean i don't have a rom?
Click to expand...
Click to collapse
What? Your obviously not doing what Im telling you to do. How are you installing semaphore you just said your phone doesnt turn on. Follow the instructions Ive posted for you in order.
Open Odin on Computer
load JVT in PDA, SRJV1 in Modem, VAUJV6 in CSC 512pit in PIT
Put phone in Download mode.
Connect phone to computer.
Com port goes yellow
Press start.
Wait till phone reboots.
After reboots, power down.
Reset Odin
Put semaphore 1.9.0 tar in PDA of Odin
put phone in Download mode
connect phone...com port goes yellow...press start
wait till phone reboots.
now you are rooted.
---------- Post added at 07:39 PM ---------- Previous post was at 07:36 PM ----------
rytro1 said:
So will Cyanogen work with this if i put it on a sd card and flash it in recovery?
Click to expand...
Click to collapse
Is your phone working now with JVT and semaphore?
Yes, but I can only get to clockwork. After I reboot clockwork it just goes straight back to clockwork.
rytro1 said:
Yes, but I can only get to clockwork. After I reboot clockwork it just goes straight back to clockwork.
Click to expand...
Click to collapse
man thats not working.....go into download mode and follow the instructions Ive given you....dont know what your doing but your getting ahead of yourself.
see post 12
I'm assuming "Phone" is the same as "Modem"?
rytro1 said:
I'm assuming "Phone" is the same as "Modem"?
Click to expand...
Click to collapse
yes thats right
I've done all that. It boots to clockwork mod. I hit "Reboot system now" and it reboots back into clockwork mod.
rytro1 said:
I've done all that. It boots to clockwork mod. I hit "Reboot system now" and it reboots back into clockwork mod.
Click to expand...
Click to collapse
after you started odin did it run for about 5 to 10 minutes and say pass at the end and reset.
if so....try flashing again but use the csc from the jvt download instead of the vaujv6.
After flashing Sephamore or the modem stuff? Because both didn't even take a minute..
forget about semaphore right now.... follow these instructions exactly
open odin on computer.
put xxjvt in PDA...its the one that says CODE from the files you downloaded and unzipped.
Put SRJV1 in PHONE the one from the download under australia/newzealand modems.
Put the csc file from the Jvt download in csc....it says csc
put the 512 pit file in PIT
put phone in download mode and connect to computer.
com port goes yellow press start.
it should take about 5 to 10 minutes. when its done it will say pass and reset. once the phone resets disconnect usb...it will take a few minutes to reboot....do this and tell me when done.
---------- Post added at 08:56 PM ---------- Previous post was at 08:28 PM ----------
After downloaded and unzipped this is what the files will look like.
PHONE_SRJV1.tar.md5....this goes in the phone section of odin
CODE_I9000XXJVT_CL617736_REV03_user_low_ship.tar.rar....this goes in PDA
GT-i9000-CSC-HOME-MULTI-OXAJVT.tar.rar....goes in CSC
S1_odin_20100512.pit.....goes in PIT
This exactly what the files look like if you downloaded the ones I told you and unzipped them.
the case in detail's :
i flashed bad kernel on my device previously and now when iam trying to flash another kernel even use ODIN or CWM everything going well and completed but when check i found the old kernel still. i tried many times with same results and no error .
- system can read/write/mount the internal memory but the new pasted files deleted after restart. external card behave normal and i can preform flash using files pasted on it but without result any change.
- in CWM wipe/format/flash operations running well but no effect on device even restarted to CWM only.
- device has yellow triangle. is it effected?
- the devil kernel stacked in machine is 2.6.35.7-gb4846d2 [email protected] #2 and the build no. is jpkj4
system running normal but cannot keep any changes i do if restarted.
-system rooted and no problem with root
-can access adb
- ODIN behave same CWM, operation work but no change.
can anyone help me guys?
i did repartition the memory useing PIT for note butno change also
thank you all in advance
anyone may share an idea?
Try wipeing everything in cwm including all formats in mounts and storage and then flash a stock rom try kk9 with Odin then re root with kk9 root then if on gb use a jig to remove triangle or if going on ics try using triangle away from chainfire
brockyneo said:
Try wipeing everything in cwm including all formats in mounts and storage and then flash a stock rom try kk9 with Odin then re root with kk9 root then if on gb use a jig to remove triangle or if going on ics try using triangle away from chainfire
Click to expand...
Click to collapse
thank you for sharing
i tried this steps using N7000OJPLA1 without success, what the spicial in KK9?
do you aware about tool stronger than Odin please? i used to flash with PIT file but odin couldn't call the memory to re-partition it.
do you think the counter if counted (1) and the triangle if appeared could prevent the system from even saving and keeping the settings which you may do? such WiFi On if make it off and restart its going back on, the rom in device now is stock rom GB.
jamaljmys said:
thank you for sharing
i tried this steps using N7000OJPLA1 without success, what the spicial in KK9?
do you aware about tool stronger than Odin please? i used to flash with PIT file but odin couldn't call the memory to re-partition it.
do you think the counter if counted (1) and the triangle if appeared could prevent the system from even saving and keeping the settings which you may do? such WiFi On if make it off and restart its going back on, the rom in device now is stock rom GB.
Click to expand...
Click to collapse
The counter and yellow triangle need to be removed for warrenty purpose if you need to send the phone back and Odin normally is the saviour of most problems NEVER flash with Odin and mark the repartition as that alone can brick your device and I use kk9 cause it can directly be rooted easily and the counter and triangle have nothing to do with your setting
Also try a rom in Odin with a pit file to see if that helps
brockyneo said:
The counter and yellow triangle need to be removed for warrenty purpose if you need to send the phone back and Odin normally is the saviour of most problems NEVER flash with Odin and mark the repartition as that alone can brick your device and I use kk9 cause it can directly be rooted easily and the counter and triangle have nothing to do with your setting
Also try a rom in Odin with a pit file to see if that helps
Click to expand...
Click to collapse
thank you brother
could you recommend me a PIT file working with direct root abel rom such kk9 and its tested ?
jamaljmys said:
thank you brother
could you recommend me a PIT file working with direct root abel rom such kk9 and its tested ?
Click to expand...
Click to collapse
Give me one min mate I'll go on PC its a pain trying on phone lol
---------- Post added at 07:54 PM ---------- Previous post was at 07:49 PM ----------
here you go mate try this
Get Heimdall, put your note in download mode. Go to the utility page, under "download as a file" click "save as", in the dialog put "galaxynote.pit". This will download the pit from the phone. Now you can untar the odin package (which might contain a pit too, in this case, you'd want to use that one), go to the flash tab of heimdall and select the pit you made (or got from the odin package, if it came with one), and add partitions and add the files from the odin tarball you extracted.
let me know how it goes
brockyneo said:
Give me one min mate I'll go on PC its a pain trying on phone lol
Click to expand...
Click to collapse
take your time bro. thank you
i think my device problem like that, the new kernel effected the internal memory by bad script which prevent the memory to deal with any operation, since the kernel in the same block with boot loader, so every time device boot load the kernel so run that bad script.
- anyway to remove the kernel files manually?
- how to stop kernel in boot at least so could do something through CWM or Odin.?
jamaljmys said:
take your time bro. thank you
i think my device problem like that, the new kernel effected the internal memory by bad script which prevent the memory to deal with any operation, since the kernel in the same block with boot loader, so every time device boot load the kernel so run that bad script.
- anyway to remove the kernel files manually?
- how to stop kernel in boot at least so could do something through CWM or Odin.?
Click to expand...
Click to collapse
try whats in the post above and if no good try cleaning the kernal files using this
http://forum.xda-developers.com/showthread.php?t=1473622
but above post should help
brockyneo said:
Give me one min mate I'll go on PC its a pain trying on phone lol
---------- Post added at 07:54 PM ---------- Previous post was at 07:49 PM ----------
here you go mate try this
Get Heimdall, put your note in download mode. Go to the utility page, under "download as a file" click "save as", in the dialog put "galaxynote.pit". This will download the pit from the phone. Now you can untar the odin package (which might contain a pit too, in this case, you'd want to use that one), go to the flash tab of heimdall and select the pit you made (or got from the odin package, if it came with one), and add partitions and add the files from the odin tarball you extracted.
let me know how it goes
Click to expand...
Click to collapse
mate
iam doing the heimdall way now
- i got the pit from device and i uploaded in flash tap
- i extracted the TAR firl and got the files:
boot.bin
cache.img
factoryfs.img
hidden.img
modem.bin
param.lfs
Sbl.bin
zImage
do i add them in same flash tab by select each one and press add ? or in package tab. really hiemdall improved much since last time i used in my GT P1000
i added in this sequense:
the partition not found i extracted file i selected to him FactoryFs file, others matched name with partition name and file in extracted.
exept one partition name UMS couldnot mach with any file.
could help by more details ?
thank you mate
jamaljmys said:
mate
iam doing the heimdall way now
- i got the pit from device and i uploaded in flash tap
- i extracted the TAR firl and got the files:
boot.bin
cache.img
factoryfs.img
hidden.img
modem.bin
param.lfs
Sbl.bin
zImage
do i add them in same flash tab by select each one and press add ? or in package tab. really hiemdall improved much since last time i used in my GT P1000
thank you mate
Click to expand...
Click to collapse
Just press add in same flash tab and should be good to go mate
brockyneo said:
Just press add in same flash tab and should be good to go mate
Click to expand...
Click to collapse
i added in this sequense:
the partition not found i extracted file i selected to him FactoryFs file, others matched name with partition name and file in extracted.
exept one partition name UMS couldnot mach with any file.
could help by more details ?
thank you mate
jamaljmys said:
i added in this sequense:
the partition not found i extracted file i selected to him FactoryFs file, others matched name with partition name and file in extracted.
exept one partition name UMS couldnot mach with any file.
could help by more details ?
thank you mate
Click to expand...
Click to collapse
Can you not flash without the ums its been a long time since I've used it I'll have a look now for ya
Uploading PIT
PIT upload successful
Uploading GANG
0%
1%
2%
3%
4%
5%
6%
7%
8%
9%
10%
11%
12%
13%
ERROR: Failed to confirm end of file transfer sequence!
GANG upload failed!
Ending session...
Rebooting device...
Heimdall Crashed!...
what is F**** that?
jamaljmys said:
Uploading PIT
PIT upload successful
Uploading GANG
0%
1%
2%
3%
4%
5%
6%
7%
8%
9%
10%
11%
12%
13%
ERROR: Failed to confirm end of file transfer sequence!
GANG upload failed!
Ending session...
Rebooting device...
Heimdall Crashed!...
what is F**** that?
Click to expand...
Click to collapse
Mmm that's odd I'll find the files needed for Odin flash
---------- Post added at 09:53 PM ---------- Previous post was at 09:47 PM ----------
are you selecting the 16gb pit well thats if your note is 16gb
---------- Post added at 09:56 PM ---------- Previous post was at 09:53 PM ----------
also may i ask what bad kernel did you flash
also can you boot into cwm and try formatting everything in mounts and storage and then flash stock rom via odin
brockyneo said:
Mmm that's odd I'll find the files needed for Odin flash
---------- Post added at 09:53 PM ---------- Previous post was at 09:47 PM ----------
are you selecting the 16gb pit well thats if your note is 16gb
---------- Post added at 09:56 PM ---------- Previous post was at 09:53 PM ----------
also may i ask what bad kernel did you flash
also can you boot into cwm and try formatting everything in mounts and storage and then flash stock rom via odin
Click to expand...
Click to collapse
-the partition UMS is"USB Mass Storage" and its not added so crash expected bro.
- i selected the 16GB yes i downloaded the PIT from device and used it
-its 2.6.35.7-gb4846d2 [email protected] #2
- i can do everything normal and get completed after any operation in CWM and Odin but when reboot the device its return for the point before, i mean nothing change. i mean also ( if wipe/format the CWM said Done but when reboot found nothing wiped or formatted)
(when flash by CWM or Odin kernel/rom any zip file its said completed but when reboot the device nothing changed even rom or kernel)
don't fed-up please, its same devil inside device.
need the tar file which included the partition name UMS now.
thank you
jamaljmys said:
-the partition UMS is"USB Mass Storage" and its not added so crash expected bro.
- i selected the 16GB yes i downloaded the PIT from device and used it
-its 2.6.35.7-gb4846d2 [email protected] #2
- i can do everything normal and get completed after any operation in CWM and Odin but when reboot the device its return for the point before, i mean nothing change. i mean also ( if wipe/format the CWM said Done but when reboot found nothing wiped or formatted)
(when flash by CWM or Odin kernel/rom any zip file its said completed but when reboot the device nothing changed even rom or kernel)
don't fed-up please, its same devil inside device.
need the tar file which included the partition name UMS now.
thank you
Click to expand...
Click to collapse
I didn't realise net chip released a kernel for the note and you was on gb right?
Right I'll have look for the ums file but should be able to extract it from heimdall
brockyneo said:
I didn't realise net chip released a kernel for the note and you was on gb right?
Right I'll have look for the ums file but should be able to extract it from heimdall
Click to expand...
Click to collapse
i think its wrong kernel yes.
iam downloading now XXLA1 wipe version and i will look inside the zip file. i guess its included.
thanks
jamaljmys said:
i think its wrong kernel yes.
iam downloading now XXLA1 wipe version and i will look inside the zip file. i guess its included.
thanks
Click to expand...
Click to collapse
OK mate let me know how it goes its bit of a pain for me to properly help as I'm not at comp at the moment sorry
brockyneo said:
OK mate let me know how it goes its bit of a pain for me to properly help as I'm not at comp at the moment sorry
Click to expand...
Click to collapse
i got the ums file and tried againg, got same Hiemdall error after 12% .
what is that? really devil?
Yea...
Instead of using cm7 for my i9000 I flashed cm7 Mesmerize..accidentally
I can enter Download mode...can flash via Odin but the problem is that it just wont start the firmware.. it boots samsung animation but then it restart...over and over agzain. Now I flashed some stock firmware via Odin but it just restarts after loading samsung logo.
Some solutions to this?
Thank you very much.
You will need to use odin with a stock ROM and the pit512 file.
In odin add all the files of the stock rom as usual then select the pit512. Once selected check re-partition.
now put phone in download mode and flash as usual.
CM based ROMS use a different file system from CM based ROMS.
Occasionally, as has happened to me, you may need to flash the ROM twice.
Once with pit & repartition checked and then a second time with no pit and repartition not checked.
---------- Post added at 02:32 PM ---------- Previous post was at 02:31 PM ----------
I see your phone is a galaxy s2.
This is the galaxy s1 forum so while the procedure is the same as above I would confirm in the SGS2 forum which pit file you should use.
Thanks for reply.
I did some flash via odin and cwm while I was waiting for an answer..
Now my Odin can`t see my Phone. Windows sees it as a gadget serial...but it wont appear in Odin. I have ClockWord Speed Recover Kernel. Heimdall kernel flashing works..
edit: and if I try to install any rom via CWM it says assert failed: getprop("ro.product.device") =="galaxys" || getprop....... E:Error in/mnt/sdcard/CWM Firmware/update-cm-7.1-GalaxyS-signed.zip
(Status 7)
Installation aborted.
I can`t mount system either...
I recommend a google search for that error. I've had something similar before a resolved it through a google search. Unfortunately can't remember where or how.
To get odin to see the phine i would download driver from sammobile.com and try to reinstall it otherwise try heimdall.
Sent from my GT-P7500 using Tapatalk 2
Odin did finally recognized the phone. Did a re-partition and it worked. Thanks a lot!
Glad i could help
Sent from my GT-P7500 using Tapatalk 2
Hello everybody.
I have a problem in my gt-N7000.
I tried to install the CM10, install normal.
I installed Gapps also normal.
When I went to wipe it crashed.
Now no more enters recovery mode, download mode only.
When I turn it only gets in this mensage:
"Formware upgrade ancountered an issue. Pease select recovery mode in Kies & try again."
I've tried to pass other Stock Roms via Odim, but always hangs Odim.
I do not know what else to do, will my phone still has solution?
And have you tried that recovery mode in Kies?
Sent from my Galaxy S3 using Tapatalk 2
NuttyBunny said:
And have you tried that recovery mode in Kies?
Sent from my Galaxy S3 using Tapatalk 2
Click to expand...
Click to collapse
Hello,
Yes, but the Kies does not recognize and is carrying the cel.
I made a DESBRICK him, and now he is going into Recovery mode.
Now is no longer appearing that message gets stuck in samsung logo.
try flashing a safe kernel from odin first and try
Qwerty123 \m/ said:
try flashing a safe kernel from odin first and try
Click to expand...
Click to collapse
Kernel There are many available.
Could you direct me to one? for no errors
Edit: I tried flashing CM10, but it hangs and then resets.
where does the odin hang? and before install cm rom what rom & kernel were you on?
nokiamodeln91 said:
where does the odin hang? and before install cm rom what rom & kernel were you on?
Click to expand...
Click to collapse
Hello,
Unfortunately I do not know which kernel was using, but I was the Official Rom 4.0.3.
I'm downloading now the site of the kernel SamMobile'll try and pass via Odin.
If it does not work, post the error here ok?
Ok.. also.. what was your flashing method? which file did you flash first? was your phone rooted?
nokiamodeln91 said:
Ok.. also.. what was your flashing method? which file did you flash first? was your phone rooted?
Click to expand...
Click to collapse
I do not know if I can answer all your questions ... I did not root the phone.
I tried going through the kernel odin said that he caught up and in factoryms.img, as stated in the attached image.
Do not know if this is of great relevance but I can not give Wipe the recovery mode, it also crashes and resets the phone.
What should I do? = /
gabrielfonsecas said:
. I did not root the phone.
Click to expand...
Click to collapse
1. I don't know what you mean by this.? The was was not rooted or some one else rooted it for you?
2. The place where odin is stuck could indicate a brick. So you need to be precise in the info you give.
3. Did you use cwm.zip to install the rom directly on a non rooted phone?
If ODIN is working for you,
Get your mobile flashed with Philz Kernel by putting the TAR file on PDA.
Enter Philz Kernel in recovery and flash a ROM of your choice.
If you can't then u r a superbrick.
nokiamodeln91 said:
1. I don't know what you mean by this.? The was was not rooted or some one else rooted it for you?
2. The place where odin is stuck could indicate a brick. So you need to be precise in the info you give.
3. Did you use cwm.zip to install the rom directly on a non rooted phone?
Click to expand...
Click to collapse
Sorry for my english, I'm using google translation.
I was using the official version 4.0.3, so I entered the reovery and installed CWM and the file to the Root. Shortly thereafter, without restarting the phone installed the CM10 and then the gapps. When I do the Wipe the phone crashed.
Since then, officials have spent several Roms by Odin and all lock.
I do not know if I was very clear on the information, but now the phone is locked it sansumg logo. And when he enters recovery does not wipe, lock and resets the device.
Again, sorry for my english.
So you have flashed cwm.zip and the the root file and then on the same temp recovery, wiped.? That is serious mistake and it seems a brick.
---------- Post added at 12:31 AM ---------- Previous post was at 12:29 AM ----------
What you can try is go to this thread
http://forum.xda-developers.com/showthread.php?t=1424997
Download the PIT file, open odin and choose the file in PIT tab. Make sure the repartition is checked. Then load the rom in pda tab. Flash the rom again.
nokiamodeln91 said:
So you have flashed cwm.zip and the the root file and then on the same temp recovery, wiped.? That is serious mistake and it seems a brick.
---------- Post added at 12:31 AM ---------- Previous post was at 12:29 AM ----------
What you can try is go to this thread
http://forum.xda-developers.com/showthread.php?t=1424997
Download the PIT file, open odin and choose the file in PIT tab. Make sure the repartition is checked. Then load the rom in pda tab. Flash the rom again.
Click to expand...
Click to collapse
I will try, thanks!!
Wait so you were on stock4.0.3 or 4.0.4 ?
Nand corruption i guess ?
nokiamodeln91 said:
So you have flashed cwm.zip and the the root file and then on the same temp recovery, wiped.? That is serious mistake and it seems a brick.
---------- Post added at 12:31 AM ---------- Previous post was at 12:29 AM ----------
What you can try is go to this thread
http://forum.xda-developers.com/showthread.php?t=1424997
Download the PIT file, open odin and choose the file in PIT tab. Make sure the repartition is checked. Then load the rom in pda tab. Flash the rom again.
Click to expand...
Click to collapse
I did what you said.
Enter the field arquivo.pit PIT odin and rom in PDA. I marked the re-partition option and it hangs in the same place.
Will my cell phone died?
Seems you system partition got corrupted. Do you have warranty?
Qwerty123 \m/ said:
Wait so you were on stock4.0.3 or 4.0.4 ?
Nand corruption i guess ?
Click to expand...
Click to collapse
Hi,
was using the official 4.0.3!!
nokiamodeln91 said:
Seems you system partition got corrupted. Do you have warranty?
Click to expand...
Click to collapse
I was also thinking that. Unfortunately it is no longer under warranty.
The techniques assists solve this kind of problem?
Do you still have access to recovery? If yes is it cwm recovery or stock android 3e recovery?