Hi I'm running CM9 25.04.2012 on Galaxy Tab p1000.
I want to upgrade to the new release (27.04.2012) without wipe data partition.
How can I do?
Thanks to all.
I believe all you have to do is boot in to recovery, and go to the install menu, select zip from sd card and install.
Usually, the requirement is to wipe cache, factory reset and wipe dalvik cache. However, since you are coming from the CM9 already, just install the new update.
What are the current not working items in the build you are using?
Related
I have the GT-i9000M
I did not put Cyanogen 9 on myself, the phone was given to me with it on it. I wanted to upgrade to cyanogen 10 so I followed the instructions here: http://forum.xda-developers.com/showthread.php?t=1778526 .
"- Upgrading from CM7/CM9?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon"
Did my nandroid backup obviously, wiped everything, then I went to "install zip from sdcard" picked "cm-10-20120726-UNOFFICIAL-galaxysmtd.zip" then my phone went into a reboot loop of just failing. So I went back into recover with 3 button combo and wiped everything again and restored from my nandroid backup, then when I booted back up I had no lockscreen and my phone and camera apps were gone.
What did I do wrong and how do I get those back and/or upgrade to cyanogen 10 properly?
Keep in mind this is my first time doing anything like this to my android, I was given it with cyanogen 9 on it.
Edit: Now when I try restoring from my nandroid backup and reboot all I see the is the cyanogen (mod) 9 animation boot screen forever, it never boots.
fastfreddy101 said:
Edit: Now when I try restoring from my nandroid backup and reboot all I see the is the cyanogen (mod) 9 animation boot screen forever, it never boots.
Click to expand...
Click to collapse
First i9000M is not same as I9000 http://forum.xda-developers.com/showthread.php?t=886158
so you need to check for compatibility problems
This procedure is for i9000
1. Using CWM, make sure to wipe data/factory reset, then wipe cache, and then go into advanced, and wipe the Dalvik cache too.
2. From there, flash the ROM
3. Afterwards, repeat the wipe step (step #1).
4. Continuing on, go into advanced and fix permissions.
5. Finally, reboot the device.
Thanks for the reply!
I finally got it by wiping everything and the dalvik cache, and reinstalling the zip from the SD card, got everything working now.
Hello.
tryed to root Official CM 7 For my galaxy ace, I had pre installed 2.3.6 version instead of 2.3, and Now It wont start normally, I didnt backup system, what should I do to get it working again? at the moment every time I turn the phone its stuck in screen that says 'android'
thanks.
Josef.!
josef19 said:
Hello.
tryed to root Official CM 7 For my galaxy ace, I had pre installed 2.3.6 version instead of 2.3, and Now It wont start normally, I didnt backup system, what should I do to get it working again? at the moment every time I turn the phone its stuck in screen that says 'android'
thanks.
Josef.!
Click to expand...
Click to collapse
You should flash CM7 ROM again with the following steps:
1. bοοt into CWM5 Recovery
2. wipe data/factory reset, wipe cache, wipe dalvik
3. flash the CM7 ROM
4. wipe data/factory reset, wipe cache
5. reboot
Hi. My galaxy s3 4g I9305 OPTUS AUSTRALIA. has been rooted cwm installed. I have tried to install Xtreme.v6.1 and supreme rom 5.0. Neither would fire up after multiple attempts. I have wiped delvic cache, cache partition, wipe data/ factory reset, battery stats and fix permissions.
both roms load (flash) sucessfully then I get the samsung reboot screen and after that a pulsing samsung logo which stays for hours. can any one tell me what I may have missed? Flash is done via cwm install zip from sd card.
tommo the noob said:
Hi. My galaxy s3 4g I9305 OPTUS AUSTRALIA. has been rooted cwm installed. I have tried to install Xtreme.v6.1 and supreme rom 5.0. Neither would fire up after multiple attempts. I have wiped delvic cache, cache partition, wipe data/ factory reset, battery stats and fix permissions.
both roms load (flash) sucessfully then I get the samsung reboot screen and after that a pulsing samsung logo which stays for hours. can any one tell me what I may have missed? Flash is done via cwm install zip from sd card.
Click to expand...
Click to collapse
Try to do the 3 wipes...
I would try TWP recovery, as big as CWM is I have found many bugs and such with it and so far absolutely zero with TWP. Is it giving you any errors when trying to flash via CWM? Read the text because it may just be warnings and install anyway. There are also logs you can upload (go to advanced settings I believe)
Sent from my GT-I9305 using xda premium
Yea, Try this recovery : http://forum.xda-developers.com/showthread.php?t=2140681
Hello,
i have recently flashed this rom: http://forum.xda-developers.com/showthread.php?t=2192109 con my i9001
i then tried to flash the gapps-jb-20130301-signed.zip and a more recent 20130421 gapps pack but after flashing using the cwm touch i then reboot and the phone starts normally without any apps installed.
how can i get the gapps to install and work?
thanks
Simone
Hmm, I'd try to wipe everything (rom, dalvik cache, data etc.) and start from scratch with two packages (ROM + chosen GAPPS) then we'll see
just for all of you to know..
since my clockworkmod (i9001 Touch CWM 6.0) taken from here http://forum.xda-developers.com/showthread.php?p=29331775#post29331775 kept giving me strange script errors not working i decided to change it with this one CWM6014-TOUCH-CM9-recovery.zip from the wiki page http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#ClockWorkMod_Recovery
then i did again the same procedure i did a few time till now with the other cwm which is:
wipe data/factory reset
wipe cache
advanced -> wipe dalvik cache
then install from external sd, flashed the rom then flashed the gapps
then reboot phone
i can now say that everything worked fine
so problem was on the cwm! cheers
I have a Galaxy S GT-i9000 with a baseband of I9000ZWJV4 and MIUI software.
I would like to remove the existing MIUI software and do a clean install of the latest Jelly Bean OS.
The more how-to guides I read, the more confused I get.
I would like to know if I do ;
Wipe data/factory reset
Wipe cache
Advanced > wipe dalvik cache
does this clean my phone of the MIUI software now installed on my phone?
Why does some programming guides say to use a pit file and some do not.
Some guides use PIT, PDA, Phone and CSC files and some do not.
Can I just "Wipe" my phone and install 4.3 Jelly Bean
or do I have to install and upgrade,
2.1 Eclair
2.3 Gingerbread
4.0 ICS
4.3 JellyBean
in that order?
When programming, does the Rom and gapps .zip files go on the phone' sd-card?
I would appreciate it very much if someone would help me install
4.3 Jelly Bean or the latest Jelly Bean on my Galaxy S GT-i9000.
Also what is the most popular Rom for the Galaxy S GT-i9000.
Thank You
No, just install lastest version of official gingerbread, find the cf root compatibile version, then go in recovery wipe data and install your jellybean(except slimbean, its buggy when installing from stock) (when flashing, it will reboot! Dont panic just use vol up+power+home, release when Samsung show up, you will booted in recovery, flash ROM again and reboot) you are done
To install jellybean firmware..
You will need to root the phone first. install cwm recovery, reboot into recovery mode wipe data/factory reset wipe cache wipe dalvik cache format data format data data format cache format system & flash zip files.
Reboot & enjoy...
# sent from a blazing slim SGSi9000 using tapatalk 2 #
Thank You