Flash with PC Odin stucks - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

My Problem: My Note will not boot. But I can put it into download mode. Then I try to flash a custom rom with PC Odin 1.85. Odin starts flashing but stucks after only perhaps 5% of flashing (factory...?).
What can I do? I tried different USB-Ports and different PC. Nothing helps. Ever the same problem!! Flash stucks after some seconds.

rogermiet said:
My Problem: My Note will not boot. But I can put it into download mode. Then I try to flash a custom rom with PC Odin 1.85. Odin starts flashing but stucks after only perhaps 5% of flashing (factory...?).
What can I do? I tried different USB-Ports and different PC. Nothing helps. Ever the same problem!! Flash stucks after some seconds.
Click to expand...
Click to collapse
Turn off firewall and antivirus. Make sure Kies is NOT running in the background. If you're having problems flash back to a stock GB rom and try again. Also give it some time. I have a very old PC and it took me 10 mins to flash.
Good luck!

I'll try it.
Edit: I tryed to flash kk9. Flash failed with error : can't open serial(com) port.
Gesendet von meinem Sensation mit Tapatalk 2

rogermiet said:
I'll try it.
Edit: I tryed to flash kk9. Flash failed with error : can't open serial(com) port.
Gesendet von meinem Sensation mit Tapatalk 2
Click to expand...
Click to collapse
Something could be wrong with your PC drivers.
It could also be that your firewall or antivirus is blocking the process.

- Make sure you have the proper drivers installed. Do that by either searching for the drivers on this forum or install Kies
- Put your phone in Download mode but don't hook it up to the pc yet
- On your pc open task manager and kill every process that has something to do with Kies or Samsung
- Start Odin
- Put all the files in the right sections
- Plug in your Note, preferably in a USB port you've not used with the Note
- Odin now should detect the Note
- Flash away

Now I tryed another USB Port. Started flashing kk9 and it went till "nand write start". Then it stucks there for more than 10 minutes.
Gesendet von meinem Sensation mit Tapatalk 2

Amy idea?
Gesendet von meinem Sensation mit Tapatalk 2

And flash from another computer ?

Try to flash
AbyssNotekernel42CWTouchOriginalLogo.tar
If it passes you can boot into CWM and flash a rom in your external SD. It worked for my SGN when it get stuck.

Will try this. Report later
Gesendet von meinem Sensation mit Tapatalk 2

Try starting Odin as administarator.
Then flash the new 4.0.3 official firmware and then flash Chainfire's kernel for it.
I had a similar problem.....no boot and only download mode was on...Stupid Note went dead between flashing on mobile odin....
This was the way I did it.
Best of luck to you !

Related

How to root my galaxy s without usb?

Hi guys, the galaxy s usb is damaged since 5 months ago and i'm trying to root my phone because i want use mobile odin to upgrade...gingerbread 2.3.3, that i have now is full of bugs, so i would get 2.3.5...please help me, i will give you 1$ paypal to thank if you want
Inviato dal mio GT-I9000 usando Tapatalk
you can try z4root or universal androot , or other apk that work nice with froyo, but not with gingerbread
so even the addresses z4root
What I would do is:
1. Download SGS kernel flasher from market.
2. Download latest Speedmod kernel from : http://forum.xda-developers.com/showthread.php?t=1044519
3. Use SGS kernel flasher to back up existing kernel and then flash Speedmod kernel.
4. Reboot into recovery (Turn phone off first. Then Power button, volume up and home button. Let go of home button when display comes on.)
5. Choose advanced speedmod features and then install superuser/root. Navigate recovery with volume up/down, select with power button.
6. Choose go back and then Reboot.
You should now be rooted (see if superuser app is in apps)
ColinB63 said:
What I would do is:
1. Download SGS kernel flasher from market.
2. Download latest Speedmod kernel from : http://forum.xda-developers.com/showthread.php?t=1044519
3. Use SGS kernel flasher to back up existing kernel and then flash Speedmod kernel.
4. Reboot into recovery (Turn phone off first. Then Power button, volume up and home button. Let go of home button when display comes on.)
5. Choose advanced speedmod features and then install superuser/root. Navigate recovery with volume up/down, select with power button.
6. Choose go back and then Reboot.
You should now be rooted (see if superuser app is in apps)
Click to expand...
Click to collapse
Sgs kernel flesher needs root .. ___
Inviato dal mio GT-I9000 usando Tapatalk
Sorry mate, can't think of any way.
Pierfranc said:
Sgs kernel flesher needs root .. ___
Inviato dal mio GT-I9000 usando Tapatalk
Click to expand...
Click to collapse
Bro is it the cable or the usb adapter of your phone? Cuz i dont get how can you charge the phone without the USB...
joelox said:
Bro is it the cable or the usb adapter of your phone? Cuz i dont get how can you charge the phone without the USB...
Click to expand...
Click to collapse
The problem is the usb of my phone, not cable or adapter bro, infact i can only charge it but pc or other devices don't see my phone
Inviato dal mio GT-I9000 usando Tapatalk
Just a thought, is usb debugging on? Menu, settings, applications, development. If usb debugging is ticked, untick it and see if the pc recognises it then.
1. call *#1234# on your phone and check what's written behind PDA
2. download the corresponding file from this thread if you are able to find it: http://forum.xda-developers.com/showthread.php?t=788108
3. Follow the "instructions (long)" in the previously mentioned thread
4. be glad, that it's rooted
otherwise let us know what you receive on step 1
[edit] forget it - i didn't consider the usb-problem, so I know only this option for SGS+:
here you should try this: http://forum.xda-developers.com/showthread.php?t=1253707
but according to the comment above, you could also check what's activated here:
> Menu > Settings > Wireless and network > USB settings > "Samsung Kies" or "Media player" or "Mass storage" - I'd recommend the last option for your circumstances!
I have tried anything to connect my phone with usb but i have resolved nothing..so my last solution would be "apply update.zip from sdcars" in recovery, and update from there, bur i need a signed update.zip that kies creates automatically in sdcard when you update your firmware
Inviato dal mio GT-I9000 usando Tapatalk
Does it charge when you plug in the usb cable?
and have you tried with an other usb cable?
if it charges, uninstall and install kies again to get the latest usb drivers,
if that does not work you could download and install android SDK and download the usb drivers from SDK manager.exe under "other"
Here is an guide for how to set up Android SDK and manually set the right driver if it doesnt detect it automaticly:
http://theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/
Hope this helps, Android is so much more with root!
pzayx said:
Does it charge when you plug in the usb cable?
and have you tried with an other usb cable?
if it charges, uninstall and install kies again to get the latest usb drivers,
if that does not work you could download and install android SDK and download the usb drivers from SDK manager.exe under "other"
Here is an guide for how to set up Android SDK and manually set the right driver if it doesnt detect it automaticly:
http://theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/
Hope this helps, Android is so much more with root!
Click to expand...
Click to collapse
I tried differents pc and cable but doesn't work so i think i have to send it to repair
Inviato dal mio GT-I9000 usando Tapatalk
Hi There,
I have same problem, my usb is not working and i did the way you said,
1. i cant see root-i9000-signed.zip instead there "apply from sd card - update.zip"
2. when i hit this option i got error "E signature verification failed"
Any clue, how can i fix it??
thanks.
prasmit said:
Hi There,
I have same problem, my usb is not working and i did the way you said,
1. i cant see root-i9000-signed.zip instead there "apply from sd card - update.zip"
2. when i hit this option i got error "E signature verification failed"
Any clue, how can i fix it??
thanks.
Click to expand...
Click to collapse
try to remove and reinstall kies from samsung site and after reboot pc...then you can go in download mode with three buttons and connect phone to computer...try and try if pc is not able to see the phone, this must works
Inviato dal mio GT-I9000 con Tapatalk 2
Maybe u should download and install the Samsung driver manually first. Then Install and start Kies. This was the solution for me in that situation
Sent from my GT-I9000 using Tapatalk 2
jogibush said:
Maybe u should download and install the Samsung driver manually first. Then Install and start Kies. This was the solution for me in that situation
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
yes but kies just contains the drivers!
Inviato dal mio GT-I9000 con Tapatalk 2
I know but sometimes kies is crashing during the driver installation and don't show that to the user.
BTW: kies isn't very comfortable and very laggy on win 7 and /or other 64 bit system's. Just install the drivers manually and flash a stock it clean custom GB ROM to get a good start. But that's my opinion
Sent from my GT-I9000 using Tapatalk 2
jogibush said:
I know but sometimes kies is crashing during the driver installation and don't show that to the user.
BTW: kies isn't very comfortable and very laggy on win 7 and /or other 64 bit system's. Just install the drivers manually and flash a stock it clean custom GB ROM to get a good start. But that's my opinion
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
I agree, but if you have 32 bit system it is stable enough, however better install only drivers after you have found them!
Inviato dal mio GT-I9000 con Tapatalk 2

Firmware upgrade problem + 4.0.3

Earlier I was trying to upgrade the firmware via Kies and something went wrong. My Note is now stuck with a " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". But when you try to connect to Kies via usb then nothing happens and is unable to connect.
What are my alternatives to get my phone working again?
next to following the recovery mode steps, usb connection troubleshooting, etc in Kies,
you can get phone into download mode and flash the desired rom throught pc odin See dr Ketans thread in sticky section original development
Sent from my GT-N7000 using Tapatalk 2
Can't seem to do it via Kies anymore since when I plug it via USB to KIES - its just says "connecting" the whole time until it times out. Sucks that this could happen even if i'm using the Kies software. Such a hassle.
Looking over dr ketans thread, would it matter which country ROM one uses from the list? What are the pros and cons?
Enter in download mode and flash the .tar file via pc odin
Sent from my GT-N7000 using xda app-developers app

Install Motorola ADB Interface Drivers

Hello a little help please. I can't install ADB driver so I Can connect my phone in fastboot mode. It happens that installation crashes every time no matter the driver version nor the source I download it from. I think it's related to the fact that the computer I have access to has a illegal windows version 'cause every time it crashes a window pops up with the warning of been victim of software falsification. So, Is there any way of achieve a successful installation in this computer?
AW: Install Motorola ADB Interface Drivers
There is an way, but XDA is not the right Place to talk about warez and cracking :thumbdown:
Gesendet von meinem XT910 mit Tapatalk 2

Brick

I think I bricked my device. not sure as i've never bricked anything before. it was rooted, and I had CWM and TWRP on it with a recovery. But it appears as though that doesn't matter lol. screen comes on and all that displays is the word Sony...and that just sits there forever. then if I connect a USB nothing happens.
Then when I dont turn it on, and connect a usb It connects but i haven't a clue if that will help at all as the device absolutely refuses to turn on when connected...Very sad day for me.
Tragediya said:
I think I bricked my device. not sure as i've never bricked anything before. it was rooted, and I had CWM and TWRP on it with a recovery. But it appears as though that doesn't matter lol. screen comes on and all that displays is the word Sony...and that just sits there forever. then if I connect a USB nothing happens.
Then when I dont turn it on, and connect a usb It connects but i haven't a clue if that will help at all as the device absolutely refuses to turn on when connected...Very sad day for me.
Click to expand...
Click to collapse
First grab flashtool from
http://www.flashtool.net/index.php
then get a stock ftf, connect your device in flashmode and flash the stock ftf
Gesendet von meinem C6603 mit Tapatalk
Do you used once flashtool?
Gesendet von meinem C6603 mit Tapatalk

[Q] pattern locked (no usb debug enabled) and recovery mod isn't working

first of all my language skills are bad so sorry for that
my problem is that device is pattern locked and asking for a google sign in verification but my data connection or wireless isn't turned on
i tried android multitools but no success device isn't detected by that tool, the problem seems to be when in download mode windows shows the error message "The last usb device you connected to this computer malfunctioed and windows does not recognize it." When i tried to enter recovery mod(stock) after showing the animation for a short while device continued to boot.What should i do ? I prefer to not to lose any data (thats why i used android multitools) but incase rest is the only way im ready for it Please help Me....:crying:
Has your computer ever worked with download mode? Have you tried uninstalling and reinstalling your USB driver's. From there you can flash a semaphore TAR from Odin and hopefully get access back to recovery. and from there use a pattern reset tool found on Google.
Sent from my GT-I9000 using Xparent Skyblue Tapatalk 2
Thanks for the Help
RuffBuster said:
Has your computer ever worked with download mode? Have you tried uninstalling and reinstalling your USB driver's. From there you can flash a semaphore TAR from Odin and hopefully get access back to recovery. and from there use a pattern reset tool found on Google.
Sent from my GT-I9000 using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
yes i've tried download mode earlier with samsung devices in my pc and it's not the first pc i tried with this phone
aksfysal said:
yes i've tried download mode earlier with samsung devices in my pc and it's not the first pc i tried with this phone
Click to expand...
Click to collapse
unless you can get it into download mode or recovery you won't be able to do anything with phone. Try another USB cable or the Samsung driver set from the "apps and themes" section on this I9000 XDA forum
Sent from my GT-I9000 using Xparent Skyblue Tapatalk 2
RuffBuster said:
unless you can get it into download mode or recovery you won't be able to do anything with phone. Try another USB cable or the Samsung driver set from the "apps and themes" section on this I9000 XDA forum
Sent from my GT-I9000 using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
I've already tried 2 cables i'm gonna try the driver you mentioned hope that helps
No success at all :crying:

Categories

Resources