[Q]From Midteam 1.1 to AlBa XXLPY Repack please help - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hello! Please give me steps for installing this ROM. I read many thread and dont get it...
I'm afraid because of i9220 leak. And can't find actual steps to update from it.

1st go to CWM
Flash Abyss or Franco or any other GB Kernel !!!!
then go to advance - reboot recovery
then flash rom
enjoy!

xaoc747 said:
1st go to CWM
Flash Abyss or Franco or any other GB Kernel !!!!
then go to advance - reboot recovery
then flash rom
enjoy!
Click to expand...
Click to collapse
don't have root
tried also abyss, after full wipe and than repack - nothing changed. Again all works fine, but don't have root and don't have superuser app.

But you have rooted Rom before?

xaoc747 said:
But you have rooted Rom before?
Click to expand...
Click to collapse
Yes.
What shall I do now? How to get back root? Looks like CWM working now. Maybe I need to flash CF-root kernel from chainfire?

Related

[Q] From an old ICS Stunner ROM, to a new CM9/10 ROM

It's been a long time since I was last seen here, I've been busy working and studying, but now that it's vacation I'd very much like to update my ROM.
Currently I'm on Kernel version: 3.0.15-I9220ZCLP5-CL295568
And my ROM is ICS Stunner Beta 5.0 (yes, a pretty old one)
CWM: v5.0.2.7
So, the question is.. How do I get from that ROM, to a new, updated one?
I've been looking around but there are no specific guides on how to do this.. And I rooted mine back when I was on 2.3.4.
Honestly, I have no idea what I should get back to before putting a new ROM over it.
It'd be great if any of you could help me out describing how it's done! I would really appreciate the effort.
Thank you in advance, and hopefully I'll be able to get the best out of my Note again after this!
Use PC Odin to flash a stock gingerbread ROM, then root and install clockworkmod recovery, download and place whatever ROM you'd like to flash on your external sd card or internal memory, lastly boot into recovery (hold volume up + home + power buttons) and factory rest, wipe cache partition and dalvik cache then flash the ROM and reboot.
Sent From An Awesome Jelly Bean Galaxy Note
Can I go directly from a GB ROM to a ICS/JB ROM? Or do I need to flash some ICS update first?
Thank you for the explanation thus far!
Lanarix said:
Can I go directly from a GB ROM to a ICS/JB ROM? Or do I need to flash some ICS update first?
Thank you for the explanation thus far!
Click to expand...
Click to collapse
You can go directly from a rooted GB ROM to a ICS ROM. I wont recommend JB rom as of now as its a preview and not a daily driver.
No flashing of ICS repacks. Forget them. They are now history
Alright thank you.
By the way, I'm on the LP5 Kernel from Stunner ROM, which had alot of bricks when you flashed stuff.
Is this still an issue? If so.. How do I work around it? Because I don't want to brick it obviously.
Bump .
Nobody has an answer for me? Please?
Lanarix said:
Alright thank you.
By the way, I'm on the LP5 Kernel from Stunner ROM, which had alot of bricks when you flashed stuff.
Is this still an issue? If so.. How do I work around it? Because I don't want to brick it obviously.
Click to expand...
Click to collapse
I just explained to you the "100% safe way" to go from a stock ics rom to a custom rom in my last post. Stock gingerbread first through pc odin, root, install clockworkmod recovery, flash custom ics/jb rom of choice.
Lanarix said:
Nobody has an answer for me? Please?
Click to expand...
Click to collapse
Follow these instructions.
If you have CWM installed and your device have full root.
Reboot into CWM Recovery
Install a safe kernel (hardcore, notecore, cf root, franco etc) or flash abyss 4.2 redpill recovery.
Reboot recovery
Now full wipe for a clean install.(cache/dalvik /data)
Flash rom
Reboot system
Done.
Sent from my GT-N7000 using Xparent ICS Tapatalk 2
So I wouldn't even need to go back to GB if I follow your instructions sahilarora2003?
And you install a kernel just by flashing a .zip file right?
+1 I would hold off on the Jelly.....nothing exciting now. Give it a little more time....like another 3-5 updates I flashed CM10 and lasted 10mins before I came back to ICS. :good:
abhisahara said:
You can go directly from a rooted GB ROM to a ICS ROM. I wont recommend JB rom as of now as its a preview and not a daily driver.
No flashing of ICS repacks. Forget them. They are now history
Click to expand...
Click to collapse
Lanarix said:
So I wouldn't even need to go back to GB if I follow your instructions sahilarora2003?
And you install a kernel just by flashing a .zip file right?
Click to expand...
Click to collapse
Yes.
Sent from my GT-N7000 using Xparent ICS Tapatalk 2

[Q] How to upgrade GB to JB?

Hi Guys,
Can someone guide / help me on how to upgrade my N7000 unit to JB and still rooted.
I'm still using GingerBread ROM with AbyssNote Kernel and already Rooted. Also installed with CWM
I want to know the step in upgrading it to Custom JB ROMs (MKalter JB, RocketRom)
Any suggestion will greatly appreciated.
Kindly refer on the images regarding details of my beloved SG Note
Thanks
You can not go from gingerbread to jb.
You need to download an ics rom ,like rocket with root and cwm. Do full wipe. Flash ics rom.
If that's cool download eybees jb
Full wipe and flash that .if root has gone open up SU and update the binary. The app will do this .just press on it .
Do not try skipping the ics . You will brick your phone ! Hope I helped
Sent from the man in Your attic.....
who says you can't go from gb to jb
i was on rooted stock gb and i flashed leaked stock jb over it and everything is working fine..
why do you think that ics has to be flashed ?
infact i did ask here at xda before flashing and nobody told me to flash ics over gb first
itsrijo said:
who says you can't go from gb to jb
i was on rooted stock gb and i flashed leaked stock jb over it and everything is working fine..
why do you think that ics has to be flashed ?
infact i did ask here at xda before flashing and nobody told me to flash ics over gb first
Click to expand...
Click to collapse
Same here. I downgraded to GB yesterday to SIM unlock my phone and went back directly to JB the second it was done.
Safe kernel is the only thing that matters, Rom base has nothing to do with it.
Sent from Nexus 7
You mean guys I can flash directly to any Custom JB ROMs without bricking my beloved Note?
Downloading the RocketRom V1 JB (by Eybee1970 -Thanks!)
Currently, I'm using the AbbysNote 4.2 Kernel I just need to follow this steps below and everything will be fine. Right?
copy ROM on your USB-storage
boot in Recovery
FullWipe (also when coming from other Sammy-JB-ROM!)
Format SYSTEM!!!
flash ROM (it will reboot automatically in most cases)
after initial setup, open Super SU-app and you have to update SU-bin (app will do that for you if necessary!)
*FullWipe - clear cache, clear Dalvik, format system, factory restore?
Thank You..
chasmodo said:
Same here. I downgraded to GB yesterday to SIM unlock my phone and went back directly to JB the second it was done.
Safe kernel is the only thing that matters, Rom base has nothing to do with it.
Sent from Nexus 7
Click to expand...
Click to collapse
Ill dig the quote out
Sent from the man in Your attic.....
howard bamber said:
You can not go from gingerbread to jb..
Click to expand...
Click to collapse
howard bamber said:
Ill dig the quote out
Click to expand...
Click to collapse
No need...its simply not accurate information
Sent from my GT-N7000 using Tapatalk 2
nhivlem said:
You mean guys I can flash directly to any Custom JB ROMs without bricking my beloved Note?
Downloading the RocketRom V1 JB (by Eybee1970 -Thanks!)
Currently, I'm using the AbbysNote 4.2 Kernel I just need to follow this steps below and everything will be fine. Right?
copy ROM on your USB-storage
boot in Recovery
FullWipe (also when coming from other Sammy-JB-ROM!)
Format SYSTEM!!!
flash ROM (it will reboot automatically in most cases)
after initial setup, open Super SU-app and you have to update SU-bin (app will do that for you if necessary!)
*FullWipe - clear cache, clear Dalvik, format system, factory restore?
Thank You..
Click to expand...
Click to collapse
That's correct, all you need is safe kernel.
Sent from my GT-N7000 using xda premium
itsrijo said:
who says you can't go from gb to jb
i was on rooted stock gb and i flashed leaked stock jb over it and everything is working fine..
why do you think that ics has to be flashed ?
infact i did ask here at xda before flashing and nobody told me to flash ics over gb first
Click to expand...
Click to collapse
i agree!! i've done that several times to flash from gb to jb using abyss kernel (just a personal preference); there are other safe kernels to flash from.
Successfully Flashed Custom ROM
From GingerBread 2.3.5 upgrade to Jelly Bean 4.1.1
This is what I've do:
1.Flash Abyss Kernel (Many Thanks to Chasmodo)
2.Reboot CWM Recovery
3. Wipe Data
4. Wipe Cache
5. Mount/System -> Format/System
6. Advance/Wipe Dalvik Cache
7. Wipe Battery Stats
8. Fix Permissions
9. Flash Rom RocketRom V1 - (Many Thanks to Eyebee)
10.Reboot (it will reboot by itself) - wait for at least 2 - 5 mins
Lastly Wait and do the Gangnam style ^_^
Note: you MUST have a safe kernel in performing this.
Many thanks to all the guys who reply to this post
Many thanks to XDA!:good:
Congrats
Back up your EFS now using k-tool
Sent from my GT-N7000 using Tapatalk 2
Thanks for the info - asf58967 :angel:
Backup and verified my EFS done.. :highfive:
flash hydracore kernel with mobile odin or if you can deal with triangle with pc odin and then you can flash whatever you want.
caution. hydracore might not work with this rom
nokiamodeln91 said:
caution. hydracore might not work with this rom
Click to expand...
Click to collapse
Present HydraCore kernels will most certainly NOT work with the JB leak Rom.

[Q] Can i flash Hydracore over Philz kernel?

I flashed philz-cwm6(safe kernel+recovery). Can i flash Hydracore kernel (.zip) through philz recovery?
mannyvinny said:
I flashed philz-cwm6(safe kernel+recovery). Can i flash Hydracore kernel (.zip) through philz recovery?
Click to expand...
Click to collapse
yes of course :good: ... but please dont say that you want use it on TW JB rom:cyclops:
djoni_gitara said:
yes of course :good: ... but please dont say that you want use it on TW JB rom:cyclops:
Click to expand...
Click to collapse
Does this answer fit for vise versa flashing ?? from hydracore to philz? im using chimera rom with 3.0.15 hydracore v7 and want to flash philz 3.99 XXLSC.
best regards
the rom you are using is not based on TW right? cannot install Philz kernel on any other rom except stock TW roms
nokiamodeln91 said:
the rom you are using is not based on TW right? cannot install Philz kernel on any other rom except stock TW roms
Click to expand...
Click to collapse
So the the rom is not starting ? No problem if a can start recovery after flashing the kernel. After flashing the kernel i want to install an TW rom http://forum.xda-developers.com/showthread.php?t=2079094 . The instruction says:
Installation: use philz TW kernel (i am using philz3.99)
1. download SlimWizz2_Tablet and xplose framework along with xposed app setting module. place these files on sdcard
2. boot in recovery
3. cleanup for new rom flash(use philz menu)
4. install rom
Can i flash it through the recovery of the hydracore??
Yes but there wont be step 3 in hydracore recovery.. so you will need to go to mounts and storage and format /sytstem, data, cache and preload
nokiamodeln91 said:
Yes but there wont be step 3 in hydracore recovery.. so you will need to go to mounts and storage and format /sytstem, data, cache and preload
Click to expand...
Click to collapse
Ok but can i flash the philz Kernel via the recovery from HC ? I want to do the Installation exactly like the instruction...
Yes .. and the phone wont boot but you will have access to Philz recovery..
nokiamodeln91 said:
Yes .. and the phone wont boot but you will have access to Philz recovery..
Click to expand...
Click to collapse
Thank you very much. Now i can safely change my rom.
Have a nice day
Happy flashing

[Q] Lost trying to install Cm10

Hi, i am want to do a clean install of CM10 but i am lost and confused.
I have Gb stock Rom 2.3.6 pda: XWJW6 csc: dbtjw2
1- How can i root my phone? I tried everything but i can't. I read in some threads that i should use SuperOneClick, Cm10 thread says that i have to use CF-root...
2- Which version of Clockworkmod Recovery should i use? I have 3e-recovery, is it necessary to install CWM?
3- Do you recommend me to use another kernel, or stock kernel is fine?
4- Are the followings steps correct?
a) Root and install CWM
b) Wipe Data (I dont want to backup my data)
c) Install Cm10
d) Install Gapps
e) Install Kernel (If necessary)
Thank you, and i know that all the info is in other threads, but i am confused!.
yoboo said:
Hi, i am want to do a clean install of CM10 but i am lost and confused.
I have Gb stock Rom 2.3.6 pda: XWJW6 csc: dbtjw2
1- How can i root my phone? I tried everything but i can't.
2- Which version of Clockworkmod Recovery should i use?
3- Do you recommend me to use another kernel, or stock kernel is fine?
4- Are the followings steps correct?
a) Root and install CWM
b) Wipe Data (I dont want to backup my data)
c) Install Cm10
d) Install Gapps
e) Install Kernel (If necessary)
Thank you, and i know that all the info is in other threads, but i am confused!.
Click to expand...
Click to collapse
Yes, these are basically the right steps. But don't forget to wipe cache. An instruction how to flash CM10 i also given in the theard of CM10 for your phone
temeritas said:
Yes, these are basically the right steps. But don't forget to wipe cache. An instruction how to flash CM10 i also given in the theard of CM10 for your phone
Click to expand...
Click to collapse
Thanks!:good:
What about kernel and version of CWM?
Anyone??
yoboo said:
Anyone??
Click to expand...
Click to collapse
Just flash cf root kernel using Odin to get root and cwm recovery. Then flash the cm10 zip and gapps.
Sent from my Galaxy Nexus using xda premium
NIMBAH said:
Just flash cf root kernel using Odin to get root and cwm recovery. Then flash the cm10 zip and gapps.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thank you! What about using semaphore kernel?? And just doing cf root I get cwm recovery??
Thank you again!!!!
yoboo said:
Thank you! What about using semaphore kernel?? And just doing cf root I get cwm recovery??
Thank you again!!!!
Click to expand...
Click to collapse
Semaphore kernel is inside the CM10 zip so it will get automatically installed when your flash the zip.
Yes CWM recovery is built into cf root kernel.
Also when you flash the Cm10 zip remember your phone will restart almost straight away and go into boot loop. This is because the partition layout is being changed.
Just reinsert the battery and boot into recovery again. Flash the cm10 zip again and this time it will finish installation.
& its no problem
Sent from my Galaxy Nexus using xda premium
NIMBAH said:
Semaphore kernel is inside the CM10 zip so it will get automatically installed when your flash the zip.
Yes CWM recovery is built into cf root kernel.
Also when you flash the Cm10 zip remember your phone will restart almost straight away and go into boot loop. This is because the partition layout is being changed.
Just reinsert the battery and boot into recovery again. Flash the cm10 zip again and this time it will finish installation.
& its no problem
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thank youuu!!!!!
I'm going to try it! Maybe I send you a pm if I have a doubt of course if it isn't a problem

[Q] Recovery for CM11 kitkat

Guys i am new here, i am looking for a recovery to flash kitkat rom. on my previews device i just only need cwm zip then flash for recovery. in there device as i read you need kernel or something before flashing cwm (im not sure sorry. ) my phone galaxy n7000 was new, i need you advice guys and can you guys give me the link for cwm for kitkat. thanks in advance.
ANDROID-000 said:
Guys i am new here, i am looking for a recovery to flash kitkat rom. on my previews device i just only need cwm zip then flash for recovery. in there device as i read you need kernel or something before flashing cwm (im not sure sorry. ) my phone galaxy n7000 was new, i need you advice guys and can you guys give me the link for cwm for kitkat. thanks in advance.
Click to expand...
Click to collapse
If you are on stock rom, flash philz kernel first and reboot to recovery , flash Raw kernel and reboot recovery and flash KK rom with gapps.
treacherous_hawk said:
If you are on stock rom, flash philz kernel first and reboot to recovery , flash Raw kernel and reboot recovery and flash KK rom with gapps.
Click to expand...
Click to collapse
2 kernel? Is that a permanent recovery?
Flash phils kernel using stock recovery?
Can i flash kk without rooting my phone? Can i ask for the link. Thanks for the reply:thumbup:
ANDROID-000 said:
2 kernel? Is that a permanent recovery?
Flash phils kernel using stock recovery?
Can i flash kk without rooting my phone? Can i ask for the link. Thanks for the reply:thumbup:
Click to expand...
Click to collapse
Yes permanent recovery.
Yes flash philz kernel in stock recovery. Do the factory reset and wipes in philz recovery. It will root your phone too but only till you flash another rom with or without root.
You can flash omnirom with gapps and don't flash superSU wouldn't have root.
Google for philz kernel n7000 and Raw kernel R4.
Sent from my GT-N7000 using Tapatalk
Thanks a lot bro....:thumbup: I'll just look in development section it is there right?:what::beer:
ANDROID-000 said:
Thanks a lot bro....:thumbup: I'll just look in development section it is there right?:what::beer:
Click to expand...
Click to collapse
I mentioned google, easiest way out.
Philz kernel: http://lmgtfy.com/?q=philz+kernel+n7000
Raw kernel: http://lmgtfy.com/?q=raw+kernel+n7000

Categories

Resources