Related
General discussion and reviews of users running on Andro-ID V3.3-RC3. I just tried it, but switched back to original MI 410 GB rom as the phone app on this rom sucks and GPU posts lower FPS. This also causes games such as GTA III to crash unexpectedly. TJ_Style must switch back to the original dialer and incase if he wishes to change, I suggest use a dailer/phone app which has a different all receiving screen. I really face a problem receiving calls with sweaty fingers. Guys please post your reviews here. Thanks.
Hi i tried to install the rc3 7z file via SUT 1.8.2 but it doesn't seem to recognise the 7z file that's available for download.. it keeps asking for an nb0 / xml file selection . do i need to change the extension or something before flashing ?
i just had a corrupted download the redownloaded 7z was extracting fine.
older backup did not work with this rom's recovery
guy's today i nearly braked by phone.
after trying this rom, when i try to flash backup made by napstar recovery then after installation when i try to reboot the phone, i m stucked at andro-id logo.
then i take battery out and boot into recovery again, then i try to update to napstar recovery. i flash the zip file and reboot the recovery. then i am also not able boot into recovery too.
then i flash stock 2.3 rom through SUT LR v1.8.2 and boot into download mode again replaced stock recovery.img with napstar's one in image folder. after that i booted into recovery and flashed my backup
thank's god my phone is safe now and running edowar great cm7.2
Hi Kallan_suz, you need to extract the .7z file using winrar. There is a file with an extension .nb0 in it. This is the file sut lr is asking for. If U need any more help post here. Its very easy yo flash though. Connect the fone and U are good to go.
Mithil
strange problem when i try to install this .nb0 it says some kind of error using sut
Dude use SUT LR 1.8.2, the other version 1.7 gives errors. Search on Google with this name and U shud find it.
Sharp Rom Vs Andro-ID V3.3-RC3
Can anyone let me know pros and cons of these 2 two roms? Coz i am very much confused selecting one. I am using Sharp Rom for my MI410 but i didn't find anything special in this rom.
SO awating your reply eagerly.
[email protected] said:
Can anyone let me know pros and cons of these 2 two roms? Coz i am very much confused selecting one. I am using Sharp Rom for my MI410 but i didn't find anything special in this rom.
SO awating your reply eagerly.
Click to expand...
Click to collapse
hi
i have used both the roms and both seem to be more or less the same
its just that i feel that the battery is better on the sharp rom
Thanks for ur reply bro. so may be i should use this rom untill our great developers gift us with most awaited ICS ROM
Sent from my SH8188U using XDA App
Hi, having problem when reflash cm7 rom from andro-id rc3 via cwm recovery.
After install Andro-id RC3 rom via SUT LR, i decided went back to edowar cm7, then i flash the cm7 thru cwm recovery (fullwipe & install zip)
I end up stuck at the "ANDRO-ID" logo during reboot, now I flash back to andro-id rc3 via SUT again.
May I know how to flash CM7 rom from Andro-id? need help =(
orangez1988 said:
Hi, having problem when reflash cm7 rom from andro-id rc3 via cwm recovery.
After install Andro-id RC3 rom via SUT LR, i decided went back to edowar cm7, then i flash the cm7 thru cwm recovery (fullwipe & install zip)
I end up stuck at the "ANDRO-ID" logo during reboot, now I flash back to andro-id rc3 via SUT again.
May I know how to flash CM7 rom from Andro-id? need help =(
Click to expand...
Click to collapse
Ok, here's what U need to do. Flash back to the stock SPICE GB rom, because Sharp and RC3 use different kernel. Then flash back to CM 7.2.
Hope this helps.
Guide to Install Rom using Sut LR
Hello friends,
This video will let you know how to install ROM using
SUT LR 1.8.2 well check out thje video how to install
for those ho do not know or have any problem installing...
in this i install Andro-id RC3
Thankz TJ. your the man.
as said by you. all the RC3 download should be counted...
hope you wil come out with ICS soon.. we know your on the road map to ICS.
hope to see soon.
This video will show you how to install the Andro-id Rc3
inforall.webs.com/spicemi410.htm
please download the software from the below link...
you will need SUT LR software to install the RC3
mediafire.com/download.php?di3xii1yy3ii4c3
hi i noticed few thing in this fw the camera refused to work by giving cannot connect error then after somehow it worked the sound production in hp is not that great earlier was using csl gingerbread rom the sound production was awesome plz contribute is it me or is it the rom whose facing such problem
Having wifi connection problem with this rom
I have tested this rom for a few days.
Everything is ok, but the only problem I have is the wifi connection.
It can't connect to my office new TP-Link TL-WA801ND.
But it works with my old BelkinG.
Anyone can help me?? Thanks!!
Althought I'm running on CM7 now
But I was use this ROM for 6weeks
This ROM has good performance n very stable
But 2 things which annoying me,,so annoying
1.Headset Volume too loud,,maybe kernel build problem,,I use headset volume control to minimize problem
2.If RAM usage too heavy,,it cause auto reboot(not sudden reboot)so you must using AKM/AMM or for best experience,use V6Supercharger script
Thats I feel of this ROM
Hey guys,,is anyone have Bravia engine tweak for this device?
Edit : ah i forgot 1thing,,bad camera start if you have low RAM,,it caused black screen n FC,,try again if you experience that,also bad video result,resulting .3gp
Sent from my CSL-MI410 using Tapatalk 2
I just installed this ROM last night. I don't find any significant difference between this and sharp ROM, with some added features. Everything works ok including FM radio. I did not test the hdmi feature.
Guys can someone tell me what is the difference between a stock ROM like Sharp and this Andro-ID V3.3-RC3, I find this very similar to rooted sharp ROM with some differences like, lock screen and bloatware removed. I am sure there must be some advantages and better features that I might be not aware of. Guys please enlighten me about the better features that I can use. I am on this ROM right now.
Thanks in advance...
Sent from my FIH-FB0 on Andro-ID V3.3-RC3 using XDA
Hi,
I have just installed this ROM. Everything seems to be working fine except GPS. The GPS is not locking. I tried rebooting several times. Whenever I tried to turn GPS on, it's just blinking but not locking. I tried for more than 15 minutes. Any fix for this?
Sent from my FIH-FB0 using XDA
Install faster fix and choose a server for your country then try gps test app for locking
Sent from my MacLite-FB0 using XDA
bravida engine
does bravida engine work on this room
Hey, I wanna to get back to 2.3 from MiniCM9 (nAa) and I don't know If I should first change kernel to standard, or first ROM to 2.3. Can somebody tell me?
mati96PL said:
Hey, I wanna to get back to 2.3 from MiniCM9 (nAa) and I don't know If I should first change kernel to standard, or first ROM to 2.3. Can somebody tell me?
Click to expand...
Click to collapse
First change rom to 2.3 then flash the appropriate kernel.
I don't think it really makes a difference, just that one is slightly less risky than the other.
Sent from my E15i using Tapatalk 2
Kernel then rom, if it's rom 1st then you MIGHT have to reflash the rom anyway
Lloir said:
Kernel then rom, if it's rom 1st then you MIGHT have to reflash the rom anyway
Click to expand...
Click to collapse
No need for reflash of rom in any circumstances... point is entering flash mode to flash correct kernel is much more doable and likelier to succeed than entering a kernel embedded recovery to flash a rom.
Hence rom first, then kernel.
Sent from my E15i using Tapatalk 2
Hmm... Who to trust?
I'm curently on nAa ICS kernel and his MiniCM9, and want to get back to Achotjan Semc Debrand Engine 2.3 with nAa 11 kernel
From my experience there is no difference at all because the kernel you wanna flash has a recovery and gives you the option to flash your rom. For example when I wanted to revert back to stock without using seus I flashed the rom first and then the kernel because if I did otherwise my device would be softbricked. I hope I made my self clear. The choice is up to you. But I like flashing the kernel first;-)
Sent from my U20i using xda premium
Ok, so I tried now with kernel first -> that doesn't work, now I'm going to check with rom first
you cant build a house without foundation! flashing the kernel first is only proper way to do this!
1.put 2.3 Rom in SD
2.flash a kernel
3.on 1st boot(at kernel logo)push back button rapidly to enter cwm
4.make a full wipe and install 2.3 rom
5.done
zmuhammx said:
1.put 2.3 Rom in SD
2.flash a kernel
3.on 1st boot(at kernel logo)push back button rapidly to enter cwm
4.make a full wipe and install 2.3 rom
5.done
Click to expand...
Click to collapse
exactly right~!
It doesnt mattersjust do both no matter which first
Sent from my E15i using XDA
Here's the stock Apanda rom Android GB 2.3.7. I couldn't know anything about this rom as it won't let me pass the lockscreen. Lockscreen was similar to the spice stock rom. Don't know if it is any different.
Mod : edit removed this link
I flashed it but seems like the touch screen is not compatible with Spice mi 410.
[Edit] Flash 0.35 kernel(sharp/tj) to make touchscreen work -> Thanks to Abenagiel.
This didn't seem to be any better than sharp rom.
Before flashing this rom be sure to backup your imei. Me and Demonskill had problems of unknown imei number when we flashed the rom and tried to revert back using cwm restore. My personal suggestion, before you do cwm restore make sure to flash tj's rc3. Find more info about imei backup using 5iromtoolbox take a look at post by http://forum.xda-developers.com/showpost.php?p=28096182&postcount=3. Thanks to LibertyMonger
Steps to flash this rom:
(1) Go to download mode and Flash this rom via SUT.
(2) Go to download mode and place the recovery.img from tj_style for the new kernel 0.35
(3) Place this 0.35 sharp kernel on sd card https://www.dropbox.com/s/c2myh6s2kgb9wi6/sharp_Kernel.zip
(4) Flash the zip via recovery.
Mirrors for the rom, recovery and 0.35 kernel can be found in the post. Thanks to aloklike- MOD edit: removed link
MOD EDIT : ok guys and the OP
i see a lot of problems i think for the safety of all i am closing this thread and removing the links. if everything is ok PM me and ill open this thread
yup touchscreen doesn't work..
kernel problem..
flash with sharp rom or andro-id rc3 kernel,, and touchscreen will work again..
Sent from my FIH-FB0 using xda
abenagiel said:
yup touchscreen doesn't work..
kernel problem..
flash with sharp rom or andro-id rc3 kernel,, and touchscreen will work again..
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
Does that mean flashing 0.35 kernel will fix the touchscreen. and make the rom work i will try
nayneshdev said:
Does that mean flashing 0.35 kernel will fix the touchscreen. and make the rom work i will try
Click to expand...
Click to collapse
yup.. work for me..
Sent from my FIH-FB0 using xda
abenagiel said:
yup.. work for me..
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
hi
sorry slightly confused r u saying if we flash RC3 or sharp and then flash this rom it will work or What
haree said:
hi
sorry slightly confused r u saying if we flash RC3 or sharp and then flash this rom it will work or What
Click to expand...
Click to collapse
not like that..
we need to replace the stock kernel with rc3 kernel or sharp kernel to make the touchscreen work..
or maybe we can replace touchscreen files with rc3 or sharp (never try this)
Sent from my FIH-FB0 using xda
abenagiel said:
not like that..
we need to replace the stock kernel with rc3 kernel or sharp kernel to make the touchscreen work..
or maybe we can replace touchscreen files with rc3 or sharp (never try this)
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
hi
sorry still confused ok simple question
im right now on the recent kernal ie im using MatBlks CM9
now if i flash this rom will it work
Edit : got my answer on the 1st page not trying ill wait for ur new ROM
its working .....
----deleted----
the file has been deleted, can u re-upload it..
thanks
[ROM]
----deleted----
Op forgot to mention in thread title this is Stock GB 2.3.7
to Install
Flash nb0 with SUTLR
Replace recovery with CWM5.XX
flash sharp Kernel with CWM
reboot
----deleted----
aloklike said:
hey mattBLK,
which kernel are you using with this rom,how is battery life on this rom ..........
Click to expand...
Click to collapse
not sure what original name was i renamed it? i was trying to find in a separate thread but noone posted so i found this.. it has OC upto>1600Mhz and smartassV2. what is the other kernel like that was posted here?
Just noticed the subtle changes in settings with 2.3.7 with added cell broadcast
aloklike said:
uploading on mediafire ..... plz wait .....
here it is ....
Apanda 2.3.7 :: http://www.mediafire.com/?69xvxkbkdcvy6t9
recovery :: http://www.mediafire.com/?dpphpw3r8z3qhmp
kernel :: http://www.mediafire.com/?2w67p3wot3x9w3t
Steps to install :
1. put kernel zip in sdcard
2. install rom via SUT (erase user data option)
3. go to donload mode and replace recovery file
4. install kernel.zip via cwm
Click to expand...
Click to collapse
Try this also, Kernel from Abenagiel's GingerMia V1 it comes with more governor.
Hit Thanks if I help
how stable is this stock rom running on other. 35 kernels like mia and rc3?
got icv problem? or any bugs?
cheezzzz said:
how stable is this stock rom running on other. 35 kernels like mia and rc3?
got icv problem? or any bugs?
Click to expand...
Click to collapse
very stable no fc no bugs for me with the kernel im using, camera & camcorder still zooms.. just use another launcher and get rid of all the bloatware/5keyboards
Guess I will have to try this, hope it is more stable than Sharp ROM. Sharp ROM has been rebooting and just had an awful freezeup while playing a basic game. Lost sensor functionality and had to pull battery. I have no luck with any ROM really wish we had one "go-to ROM" that is fully stable.
Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700
tj_style said:
Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700
Click to expand...
Click to collapse
(0_0!)
wow the master was here..
there was FB1-FB3 devices??
#tumbennongolom??
tj_style said:
Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700
Click to expand...
Click to collapse
after flashing this rom i am having issues with unknown imei number.so it seemed like i had lost my imei number, but after flashing rc3 i again recovered it this is the reason why i removed the link but couldnt post this information sooner then this. Those who are using this please backup your imei first using 5iromtoolbox app available on xda also on ideos x5 forum.
Sent from my Desire HD using xda app-developers app
how can i flash properly a cm9 or cm10 rom if i'm currently using kingdroid v7.1 and notecore kernel ???
Sent from my GT-N7000 using xda premium
If you mean notecore kernel.. It is safe to flash roms from there as it has MMC_CAP_ERASE disabled and you can perform all the necessary wipes in order to flash the new rom
Enviado desde mi GT-N7000 usando Tapatalk 2
Notecore is safe but not any ics.kernel is safe to flash cm base ROM
Dont understand why op asking someone tried, why someone flash from ics when it can brick device. Just to try brick?
Sent from my GT-N7000 using xda premium
dr.ketan said:
Notecore is safe but not any ics.kernel is safe to flash cm base kernel.
Dont understand why op asking someone tried, why someone flash from ics when it can brick device. Just to try brick?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Well if he by "glnote" kernel means stock ics I think this thread should be reported/blocked
Sent from my GT-N7000 using Tapatalk 2
dr.ketan said:
Notecore is safe but not any ics.kernel is safe to flash cm base kernel.
Dont understand why op asking someone tried, why someone flash from ics when it can brick device. Just to try brick?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
i'm sorry cause in a cm10 based thread i asked if it is safe to flash cm10 with notecore kernel and someone said that it's a safe kernel..So what do they mean by that? just finding a way how properly flash cm9 or cm10 if i'm on kdv7.1 ics and my kernel is notecore v13.. sorry for the misunderstanding....
i meant notekernel by gavin..
Notekernel is safe means you can safely wipe, flash CWM, can take nadroid backup/Restore on ICS ROM only.
Here in your case this safety have no concern. Notecore is TW based ICS kernel. You can't flash CM based ROM on any ICS based kernel/ROM.
To flash CM based ROM, get GB ROM/Kernel + CWM and flash CM based ROM using that.
Yes. Flash using pc odin, then root and install cwm, before flashing cm9.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Notekernel is safe means you can safely wipe, flash CWM, can take nadroid backup/Restore on ICS ROM only.
Here in your case this safety have no concern. Notecore is TW based ICS kernel. You can't flash CM based ROM on any ICS based kernel/ROM.
To flash CM based ROM, get GB ROM/Kernel + CWM and flash CM based ROM using that.
Click to expand...
Click to collapse
That is 100% wrong,
you CAN flash CM{9,10} from a safe kernel, be it SpeedMod, franco or NoteCore, exactly the same way you can flash a TW rom from a CM kernel, as long as it's a safe kernel you can do whatever you want.
Now, if you flash NoteCore *after* you flash CM, your device won't boot, however you can always use the recovery to install a CM kernel or just a TW rom.
You do NOT need to flash a whole GB ROM, you can just flash the kernel and boot into it's recovery.
Also, you do NOT need a GB kernel or Abyss to flash anything as long as you have a safe kernel, aka SpeedMod, NoteCore, CM9/10, Thor, etc.
Your statement about flashing a whole GB ROM just to flash CM is misleading and wrong.
I still appreciate all your useful posts.
@PierreTech, it is 100% safe to wipe and install CM from NoteCore.
Steps :
0. Do a nandroid backup or a titanium backup. (optional really)
1. Reboot into recovery.
2. Do a factory reset.
3. Install CM9/10/whatever.
4. If it doesn't include google apps, make sure you have the appropriate zip file and flash it too.
life.eq.null said:
That is 100% wrong,
you CAN flash CM{9,10} from a safe kernel, be it SpeedMod, franco or NoteCore, exactly the same way you can flash a TW rom from a CM kernel, as long as it's a safe kernel you can do whatever you want.
Now, if you flash NoteCore *after* you flash CM, your device won't boot, however you can always use the recovery to install a CM kernel or just a TW rom.
You do NOT need to flash a whole GB ROM, you can just flash the kernel and boot into it's recovery.
Also, you do NOT need a GB kernel or Abyss to flash anything as long as you have a safe kernel, aka SpeedMod, NoteCore, CM9/10, Thor, etc.
Your statement about flashing a whole GB ROM just to flash CM is misleading and wrong.
I still appreciate all your useful posts.
@PierreTech, it is 100% safe to wipe and install CM from NoteCore.
Steps :
0. Do a nandroid backup or a titanium backup. (optional really)
1. Reboot into recovery.
2. Do a factory reset.
3. Install CM9/10/whatever.
4. If it doesn't include google apps, make sure you have the appropriate zip file and flash it too.
Click to expand...
Click to collapse
Hehe dr.ketan I gotta agree this guy... You can use notecore kernel to flash any ICS custom rom... Aosp or tw.. As when you flash the rom via cwm the rom will flash its own kernel... In the case of CM9/10 the proper kernel will be flashed along with the rom overwriting notecore/speedmod..
But I can not agree the tone he does make things clear.. He could just kindly say no dude this works this way or that...
I'm sure you know way more things than me or him but in this little thing they guy its right
Enviado desde mi GT-N7000 usando Tapatalk 2
I meant no disrespect to dr.ketan, without his great guide I wouldn't have been able to root my phone.
Oh, i really dont mind. It.is possible i may not knowing everything . My opinion was just based on Instruction on cm9 thread where it is mentioned that cm based rom shudn't flash on ics based rom, and that only thing i took into reference. I never have used any custom rom so may be not aware of fact, but this also be useful if such clearification to be made on installation instruction on op of cm rom thread, as really i m feeling awkward to go against developers instruction.
Just to edit :
@life.eq.null
You finds my statement to flash full rom misleading and wrong, but actually
I already used word 'GB ROM/Kernel' to flash.
That just means either rom or kernel. I never said you need to flash only ROM. I showing you one possibility, if someone on Non rootable GB ROM, then it will not be easy task to flash Full prerooted/rootable ROM to get CWM? in that case it is niether misleading nor 100% wrong.
Now here i am copying text written on CM9 thread installation instruction
Make sure to run CM9 or an AOSP-based ROM : FLASHING FROM STOCK ICS OR ROMS BASED ON STOCK ICS WILL RESULT IN A BRICK!
Click to expand...
Click to collapse
Now if my statement is 100% wrong. totally misleading then you should head up to developers of CM9, to edit instruction in more clear way. b'coz here ROM itself said to avoid, no instruction about to use safe kernel mentioned.
I am agree your information may be recent and experience based, even i can say may be better and useful to users who are on safe kernel. But that doesn't make older instruction wrong and misleading, when till now everybody following this instruction which is instructed by developer only.
Regards.
Sent from my GT-N7000 using xda premium
That's the reason why i'm doubting to flash cm10 over my rom/kernel.. Anyway thanks. Learned a lot
Sent from my GT-N7000 using xda premium
PierreTech said:
That's the reason why i'm doubting to flash cm10 over my rom/kernel.. Anyway thanks. Learned a lot
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
"Quote:
Make sure to run CM9 or an AOSP-based ROM : FLASHING FROM STOCK ICS OR ROMS BASED ON STOCK ICS WILL RESULT IN A BRICK!"
I think they only talk about the Kernel, not about the whole rom. I flashed many times a cm9 rom on a stock ics rom, but always AFTER flashing through CWM a safe cm9 kernel, or abyssnote4.2.
from ics stock, usually I boot to recovery, apply the cleaning script Sybr, flash my safe kernel (do not reboot, it will work now), do the 3 wipes, then flash new rom cm9 based. then reboot.
Hi, just found at my wife's huawei u9000 restarting sometimes.
Want to flash with newest stable rom, maybe after when i understand better this proces something modified/custom
Model: HUAWEI-U9000
Android 2.2.2
Radio PR232
Kernel: Apps_2.6.32.9-perf
When i try this rom: http://forum.xda-developers.com/showthread.php?t=1274063 it gives me wrong PID ???!!!
My last flashing was with HTC diamond, and it wasn't so complicated like android. So just need help.
SUT is software updating tool that i found, can't just put nb0 file on sd card?
What is CWM ? Need root ? (what does it mean)
I know is different .32 and .35
Best if i get stable android 4.04 .35 Just give me ritght directions to doing it guys
CWM is an recovery used to install an custom rom
you want to get an custom rom right?
and also the .nbo file should be on the root of sd and installed from bootloader
Sent from my WT19i using xda app-developers app
So i should find CWM for my rom ?
Kernel: Apps_2.6.32.9-perf
Android 2.2.2
Best if i cen get 4.0.4 with all working inside
find CM9 for your device and install via CWM for your phone
Sent from my WT19i using xda app-developers app
Just installed http://forum.xda-developers.com/showthread.php?t=1278027
and starting with CM9 RC2...
Stop, but i think i should go from .32 to .35 first, so how can i make this now.
1. I have installed CWM recovery v5.0.2.7 for .32
For changing base kernel.. you need to flash andro-id rc3 via windows sultr file extention is .nb0.. and you also got CWM .35 base automaticaly included..
And than you can flash the other custom rom for .35 base kernel..
Sent from my FIH-FB0 using xda app
Enable HDMI port
Hi guys,
How to enable the HDMI port in our device especially for our custom ICS ROM?...Is there any tools or step that we need to do so that we can use our phone's HDMI?
After flashing to CM9 RC2 everything looks and works awesome, but softkeys are changed/randomized. How can fix this?
FIXED: http://forum.xda-developers.com/showthread.php?t=1715906