Hello,
I installed revolutionary on my phone and i installed vittorus ICS ROM and i want to revert back to original HTC 2.3.5 so i downloaded the RUU.exe and that didnt work so i extracted it and renamed it PG58IMG.zip and tried to install it, i got the progress bar then nothing, then i renamed it to PG32IMG.zip and it also did the same. Then i extracted the HBOOT and Android.txt from it and named it PG32IMG.zip and then it got stuck on 'Persing' or something like that.
So heres the point:
I have a HTC Incredible S thats been unlocked with HTCDev and S is ON and i have Revolutionary installed and i have the ROM (RUU) of 2.3.5 (Optus Australia) and i have no idea how to install it (Revolutionary couldn't install it).
Please help!
Thanks, Danz207
danz207 said:
Hello,
I installed revolutionary on my phone and i installed vittorus ICS ROM and i wanot sure hont to revert back to original HTC 2.3.5 so i downloaded the RUU.exe and that didnt work so i extracted it and renamed it PG58IMG.zip and tried to install it, i got the progress bar then nothing, then i renamed it to PG32IMG.zip and it also did the same. Then i extracted the HBOOT and Android.txt from it and named it PG32IMG.zip and then it got stuck on 'Persing' or something like that.
So heres the point:
I have a HTC Incredible S thats been unlocked with HTCDev and S is ON and i have Revolutionary installed and i have the ROM (RUU) of 2.3.5 (Optus Australia) and i have no idea how to install it (Revolutionary couldn't install it).
Please help!
Thanks, Danz207
Click to expand...
Click to collapse
Not sure how you managed to get revolutionary on an s-on phone... but here's a thread that might help you http://forum.xda-developers.com/showthread.php?t=1359555
Edit: what version is your hboot?
Nonverbose said:
Not sure how you managed to get revolutionary on an s-on phone... but here's a thread that might help you http://forum.xda-developers.com/showthread.php?t=1359555
Edit: what version is your hboot?
Click to expand...
Click to collapse
I used a cmd.exe prompt whilst on Fastboot, and 2.00
Nonverbose said:
http://forum.xda-developers.com/showthread.php?t=1359555
Click to expand...
Click to collapse
That doesnt work, it needs me to get the rom.zip and name it PG32IMG.zip and then go into HBOOT and let it install but i get an error saying 'Invalid image or file'
danz207 said:
That doesnt work, it needs me to get the rom.zip and name it PG32IMG.zip and then go into HBOOT and let it install but i get an error saying 'Invalid image or file'
Click to expand...
Click to collapse
If your hboot is 2.00, then you do not have revolutionary installed. Could you post the output of "fastboot getvar all"? Minus the imei and serial number.
Nonverbose said:
If your hboot is 2.00, then you do not have revolutionary installed. Could you post the output of "fastboot getvar all"? Minus the imei and serial number.
Click to expand...
Click to collapse
I do have HBOOT 2 AND revolutionary installed, and i have no idea what you want me todo in the second part.
danz207 said:
I do have HBOOT 2 AND revolutionary installed, and i have no idea what you want me todo in the second part.
Click to expand...
Click to collapse
Put the phone in FASTBOOT USB and then in a command window on your PC tpe that command and then post the output of that command for us to look at.
If you don't understand these instructions, I suggest you read and study before going on otherwise you cold really hose up your phone.
tpbklake said:
Put the phone in FASTBOOT USB and then in a command window on your PC tpe that command and then post the output of that command for us to look at.
Click to expand...
Click to collapse
C:\Users\NAME>fastboot getvar all
'fastboot' is not recognized as an internal or external command,
operable program or batch file.
I'm guessing thats not what you were after?
I'm not on my usual computer so i'll have to do it later maybe.
danz207 said:
I do have HBOOT 2 AND revolutionary installed, and i have no idea what you want me todo in the second part.
Click to expand...
Click to collapse
I believe you have Revolutionary confused with ClockworkMod recovery after I reread your OP.
As part of the HTCDEV unlock process you installed the Android SDK to your PC. You need to open a command window and change the working directory to that directory. That is where the Fastboot.exe is located.
tpbklake said:
I believe you have Revolutionary confused with ClockworkMod recovery after I reread your OP.
Click to expand...
Click to collapse
Oops :S
I guess i do have that installed. As i said i'll have to do that tomorrow or Friday. Sorry for the confusion
danz207 said:
Oops :S
I guess i do have that installed. As i said i'll have to do that tomorrow or Friday. Sorry for the confusion
Click to expand...
Click to collapse
Also, after I reread your OP, the problem with trying to run the RUU is that you have the bootloader unlocked, that is why the RUU fails.
You need to put the phone into FASTBOOT USB mode and then enter the command:
fastboot oem lock
Then you should be able to the RUU and get back to stock.
tpbklake said:
Also, after I reread your OP, the problem with trying to run the RUU is that you have the bootloader unlocked, that is why the RUU fails.
You need to put the phone into FASTBOOT USB mode and then enter the command:
fastboot oem lock
Then you should be able to the RUU and get back to stock.
Click to expand...
Click to collapse
Ok, so if i install Android SDK on this computer and get fastboot and that other file into another folder and point cmd at it and do that, does that mean i can just run the ruu.exe and it will revert it back to HTC firmware?
danz207 said:
Ok, so if i install Android SDK on this computer and get fastboot and that other file into another folder and point cmd at it and do that, does that mean i can just run the ruu.exe and it will revert it back to HTC firmware?
Click to expand...
Click to collapse
Yes once you relock the bootloader the RUU should run to completion and you will be back to stock.
tpbklake said:
Also, after I reread your OP, the problem with trying to run the RUU is that you have the bootloader unlocked, that is why the RUU fails.
You need to put the phone into FASTBOOT USB mode and then enter the command:
fastboot oem lock
Then you should be able to the RUU and get back to stock.
Click to expand...
Click to collapse
Ok, i did that then i got:
c:\Android>fastboot oem lock
...
(bootloader) Lock successfully...
FAILED (status read failed (Too many links))
finished. total time: 0.456s
My phone now says:
*** RELOCKED ***
*** Security Warning ***
And in reply to 'Nonverbose' i typed in fastboot getvar all and got:
c:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0000
(bootloader) version-baseband: 3822.10.08.28_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.09.980.4
(bootloader) serialno: **********
(bootloader) imei: **********
(bootloader) product: vivo
(bootloader) platform: HBOOT-7630
(bootloader) modelid: PG3213000
(bootloader) cidnum: OPTUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4197mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-af9874be
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
danz207 said:
Ok, so if i install Android SDK on this computer and get fastboot and that other file into another folder and point cmd at it and do that, does that mean i can just run the ruu.exe and it will revert it back to HTC firmware?
Click to expand...
Click to collapse
tpbklake said:
Yes once you relock the bootloader the RUU should run to completion and you will be back to stock.
Click to expand...
Click to collapse
Which RUU are you going to try and run? That is the reason why nonverbose wanted you to run the Fastboot getvar all command to make sure you are trying to run the right one.
tpbklake said:
Which RUU are you going to try and run? That is the reason why nonverbose wanted you to run the Fastboot getvar all command to make sure you are trying to run the right one.
Click to expand...
Click to collapse
I'm going to run: RUU_Vivo_Gingerbread_S_Optus_AU_2.12.980.2_R_Radio_20.2803.30.085AU_3805.04.03.12_M_release_185028_signed.exe
But i can't get into my phone now. Everytime i try to turn it on it goes straight to HBOOT... Help?
danz207 said:
I'm going to run: RUU_Vivo_Gingerbread_S_Optus_AU_2.12.980.2_R_Radio_20.2803.30.085AU_3805.04.03.12_M_release_185028_signed.exe
But i can't get into my phone now. Everytime i try to turn it on it goes straight to HBOOT... Help?
Click to expand...
Click to collapse
That RUU is too old to flash anyway based on your current mainver value. It will fail. You need to flash the 3.11 405.2 RUU and will probably need a goldcard to do so.
Did you make a nandroid backup from Recovery before you flashed your custom ICS ROM?
tpbklake said:
That RUU is too old to flash anyway based on your current mainver value. It will fail. You need to flash the 3.11 405.2 RUU and will probably need a goldcard to do so.
Did you make a nandroid backup from Recovery before you flashed your custom ICS ROM?
Click to expand...
Click to collapse
I made some sort of backup in Clockworkmod but i had like 30 folders on my sd card so i deleted a few and only kept a folder called 'Backup'
Which is for Astro... so uhh.. no. And i have no idea what a 'Goldcard' is, so im pretty much stuffed huh?
danz207 said:
I made some sort of backup in Clockworkmod but i had like 30 folders on my sd card so i deleted a few and only kept a folder called 'Backup'
Which is for Astro... so uhh.. no. And i have no idea what a 'Goldcard' is, so im pretty much stuffed huh?
Click to expand...
Click to collapse
You'll need to unlock the bootloader again and then install ClockworkMod and then flash a custom ROM to get going again.
tpbklake said:
You'll need to unlock the bootloader again and then install ClockworkMod and then flash a custom ROM to get going again.
Click to expand...
Click to collapse
I already have a rom on there now, can i just flash the boot.img to get it working?
Also after i do this is there anyway to get HTC firmware back on?
Related
Hi guys, I've looked around for this but have found no answers so far. So I'm looking to unroot my phone, but have had a massive problem when using SuperCID to change my CID to HTC___001 from H3G__001 (Three UK). Instead of changing the CID by using the command, it will say "[SD_ERR] The project doesn't support SD card" Is this because when I used s-off the data was wiped or something similar? Please help the phone is bricked and can access the bootloader and recovery (using TWRP) would it be worth trying to flash a new ROM and try to sort it out? Any help would be welcome and will be thanked for any legitimate suggestion.
People need to stop mixjng up soft bricked and bricked...what fastboot command are you entering?
Sorry, I'm not 100% sure what either one meant, but thanks. The command that is issued is - fastboot oem writecid HTC__001
Anyone else have some ideas? Need to get this fixed quickly! I'm going to try and put a new ROM on it to flash it, and then hopefully I will be able to recover it properly. I have a H3G RUU from the HTCDev portal, but don't know how to put the kernel into a RUU and boot it into the phone, so if someone knows how to do this, it would be greatly appreciated if they could tell me, thank you!
At what point did your phone stop booting (what was the step you took last time it booted)?
Are you using the SuperCID command in fastboot?
JHyde92 said:
Hi guys, I've looked around for this but have found no answers so far. So I'm looking to unroot my phone, but have had a massive problem when using SuperCID to change my CID to HTC___001 from H3G__001 (Three UK). Instead of changing the CID by using the command, it will say "[SD_ERR] The project doesn't support SD card" Is this because when I used s-off the data was wiped or something similar? Please help the phone is bricked and can access the bootloader and recovery (using TWRP) would it be worth trying to flash a new ROM and try to sort it out? Any help would be welcome and will be thanked for any legitimate suggestion.
Click to expand...
Click to collapse
how far does your phone get when booting? Splash screen or nothing at all?
voltigeur said:
how far does your phone get when booting? Splash screen or nothing at all?
Click to expand...
Click to collapse
Ardmanz said:
At what point did your phone stop booting (what was the step you took last time it booted)?
Are you using the SuperCID command in fastboot?
Click to expand...
Click to collapse
I get to bootloader and recovery, however I used to get to Cyanogenmod 10.1 load screen (blue circle) but never got past it. I am looking to unroot my phone and go back to Sense 5. I used fastboot to try SuperCID.
JHyde92 said:
I get to bootloader and recovery, however I used to get to Cyanogenmod 10.1 load screen (blue circle) but never got past it. I am looking to unroot my phone and go back to Sense 5. I used fastboot to try SuperCID.
Click to expand...
Click to collapse
go to fastboot and type this. fastboot oem getvar
and copy what you get to the thread
voltigeur said:
go to fastboot and type this. fastboot oem getvar
and copy what you get to the thread
Click to expand...
Click to collapse
MacBook-Prolatform-tools JHyde$ ./fastboot oem getvar
...
(bootloader) [ERR] Command error !!!
and whindows pc?
JHyde92 said:
MacBook-Prolatform-tools JHyde$ ./fastboot oem getvar
...
(bootloader) [ERR] Command error !!!
Click to expand...
Click to collapse
Are you sure you are in the right section of bootloader??
It has to say "Fastboot USB"
Try to install the proper drivers on a windows system and go into bootloader (Fastboot screen) and run the command...
If you are able to go into recovery and bootloader, then your device is not bricked.
:No-Frost: said:
Are you sure you are in the right section of bootloader??
It has to say "Fastboot USB"
Try to install the proper drivers on a windows system and go into bootloader (Fastboot screen) and run the command...
If you are able to go into recovery and bootloader, then your device is not bricked.
Click to expand...
Click to collapse
Okay I've got onto a Windows computer, I've got the drivers for the HTC One loaded up onto it. Which command would it be to use? Thanks
JHyde92 said:
Okay I've got onto a Windows computer, I've got the drivers for the HTC One loaded up onto it. Which command would it be to use? Thanks
Click to expand...
Click to collapse
u have fastboot and ADB files?
No i have them for u
voltigeur said:
u have fastboot and ADB files?
No i have them for u
Click to expand...
Click to collapse
Now use "fastboot oem getvar"? I have just put TrickDroid 8.0 so I do have access to my phone if I need it. What else will I need to do? Sorry for being a bit of a noob haha
JHyde92 said:
Now use "fastboot oem getvar"? I have just put TrickDroid 8.0 so I do have access to my phone if I need it. What else will I need to do? Sorry for being a bit of a noob haha
Click to expand...
Click to collapse
if you have the system booted into the rom, first you will have to issue the command "adb reboot bootloader". That will take you to the bootloader were you will be able to run the fastboot commands like "fastboot getvar all"
That will give you some information about the device
voltigeur said:
u have fastboot and ADB files?
No i have them for u
Click to expand...
Click to collapse
:No-Frost: said:
if you have the system booted into the rom, first you will have to issue the command "adb reboot bootloader". That will take you to the bootloader were you will be able to run the fastboot commands like "fastboot getvar all"
That will give you some information about the device
Click to expand...
Click to collapse
Thanks mate, this is what I've got.
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.44.0000
INFOversion-baseband: 4A.13.3231.27
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.28.771.6
INFOversion-misc: PVT SHIP S-ON
INFOserialno: FA33VW902453
INFOimei: 354436050499639
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: H3G__001
INFObattery-status: good
INFObattery-voltage: 3926mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
JHyde92 said:
Thanks mate, this is what I've got.
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.44.0000
INFOversion-baseband: 4A.13.3231.27
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.28.771.6
INFOversion-misc: PVT SHIP S-ON
INFOserialno: FA33VW902453
INFOimei: 354436050499639
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: H3G__001
INFObattery-status: good
INFObattery-voltage: 3926mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
Click to expand...
Click to collapse
okay
get new unlock token at HTCDEV
Flash CMW recovery
http://forum.xda-developers.com/showthread.php?t=2173863
use this line
fastboot flash recovery recovery-clockwork-6.0.3.2-m7.img
Download your rom here:
http://bugsylawson.com/files/file/1056-m7-cwm-nandroid-backup-cid-h3g-001-128771x/
Flash it whit ADB sideload command
that wil work
Also, I recommend you to upgrade the firmware first... Don't have the link now, but you can check on Android Revolution HD topic. On first post, Mike posted a link from where to get latest firmware, make sure to have the right CID, if not, you should follow the revone instructions to get your device S-OFF (it's extremely easy ), just check on the Original Android Development section
---------- Post added at 01:35 PM ---------- Previous post was at 01:34 PM ----------
By the way, your device is S-ON so you're not gonna be able to change the CID until you get S-OFF
voltigeur said:
okay
get new unlock token at HTCDEV
Flash CMW recovery
http://forum.xda-developers.com/showthread.php?t=2173863
use this line
fastboot flash recovery recovery-clockwork-6.0.3.2-m7.img
Download your rom here:
http://bugsylawson.com/files/file/1056-m7-cwm-nandroid-backup-cid-h3g-001-128771x/
Flash it whit ADB sideload command
that wil work
Click to expand...
Click to collapse
Will I need to S-Off too?
JHyde92 said:
Will I need to S-Off too?
Click to expand...
Click to collapse
Once you have your device unlocked (bootloader unlocked by HTC Developer) you can install custom recovery (make sure to clear the cache from fastboot, can't remember the command now as I have a terrible headache and I'm doing my best trying to remember everything), then you can copy the rom into the SD or sideload the rom and then flash a custom rom...
In order to get SUPER-CID you will require to be S-OFF
Hi, i have update my HTC One to GE 4.3. All works fine but now i must return to stock because i prefer sense. The question is, how can i run ruu? I have s off and i chance my cid to HTC__001, my hboot is 1.54, i need to do something else? Tnx for reply!
RockLee91 said:
Hi, i have update my HTC One to GE 4.3. All works fine but now i must return to stock because i prefer sense. The question is, how can i run ruu? I have s off and i chance my cid to HTC__001, my hboot is 1.54, i need to do something else? Tnx for reply!
Click to expand...
Click to collapse
Simply flash a stock RUU which matches the CID or just use fastboot oem writecid 11111111 to be able to flash any RUU.
RockLee91 said:
Hi, i have update my HTC One to GE 4.3. All works fine but now i must return to stock because i prefer sense. The question is, how can i run ruu? I have s off and i chance my cid to HTC__001, my hboot is 1.54, i need to do something else? Tnx for reply!
Click to expand...
Click to collapse
if you have S-Off download any RUU and open the .EXE file on your Windows PC, then follow the instruction
Can i execute a ruu of a lower version? And can i do that with 1.54 hboot? When i try with HTC__001 cid the setup wizard give me error this is the ruu i want to flash. RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed
Its the correct One?
I've tried with super cid but the result was the same... Any advice?
RockLee91 said:
I've tried with super cid but the result was the same... Any advice?
Click to expand...
Click to collapse
Try this.
1. Run the RUU and click next but no further
2. Go to your user folder ie C:\Users\Nameofuser\AppData\Local\Temp
3. Search for rom.zip and then copy it to another location on your PC
4. Stop the RUU
5. Reboot your phone into the bootloader
6. Go into fastboot
7. fastboot oem rebootRUU
8. fastboot flash zip rom.zip (will fail the first time)
9. fastboot flash zip rom.zip (should now work)
daleski75 said:
Try this.
1. Run the RUU and click next but no further
2. Go to your user folder ie C:\Users\Nameofuser\AppData\Local\Temp
3. Search for rom.zip and then copy it to another location on your PC
4. Stop the RUU
5. Reboot your phone into the bootloader
6. Go into fastboot
7. fastboot oem rebootRUU
8. fastboot flash zip rom.zip (will fail the first time)
9. fastboot flash zip rom.zip (should now work)
Click to expand...
Click to collapse
The first time i do fastboot the terminal work for a while and then get the failed message, the second time got failed message again without work, it says status read failed (too many links)
RockLee91 said:
The first time i do fastboot the terminal work for a while and then get the failed message, the second time got failed message again without work, it says status read failed (too many links)
Click to expand...
Click to collapse
Did you literally flash everything to get the GE edition as per another thread on the conversion and also did you flash the 4.3 GE hboot?
I flash the zip of the rooted GE 4.3 the same way you told me to do before.
I follow this guide : http://forum.xda-developers.com/showthread.php?t=2358781
RockLee91 said:
I flash the zip of the rooted GE 4.3 the same way you told me to do before
Click to expand...
Click to collapse
can you run fastboot getvar all and post the output here?
INFOversion: 0.5
INFOversion-bootloader: 1.54.0000
INFOversion-baseband: 4A.18.3263.15
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.06.1700.10
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: *************
INFOimei: *************
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 3826mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-94cf81a8fd
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.062s
Probably a good idea to remove your IMEI and SERIAL number from your post but anyway...
Try just flashing the stock rom from this thread using CWM or TWRP and then flash the stock recovery back after.
http://forum.xda-developers.com/showthread.php?t=2224752
Done, remove from quote top pls XD
daleski75 said:
Probably a good idea to remove your IMEI and SERIAL number from your post but anyway...
Try just flashing the stock rom from this thread using CWM or TWRP and then flash the stock recovery back after.
http://forum.xda-developers.com/showthread.php?t=2224752
Click to expand...
Click to collapse
how can i get custom recovery on GE 4.3?
RockLee91 said:
how can i get custom recovery on GE 4.3?
Click to expand...
Click to collapse
Flash a custom recovery as normal ie fastboot flash recovery openrecovery.img etc
i have flashed the rom that you linked me but now the phone stuck on boot screen :crying:
any advice?
SOLVED: i've flashed another rom and now work like a charm i flashed android revolution hd 12.1 ^^ tnx for all the support you saved me!
Help!
I recently installed the 4.06.1540.3.zip firmware onto my HTC One in preparation to install Android Revolution HD 41. After installing the firmware, I have been unable to unlock the relocked bootloader. I am able to send commands via fastboot and can successfully send the unlock code but nothing shows up on the phone. I currently have no working OS on the phone and only have stock recovery, it seems, and obviously can't send over a custom recovery until I'm unlocked which I can't do =(.
Please help, I have no phone!
Why did you lock it?
Sent from my HTC One using Tapatalk
xcrazydx said:
Why did you lock it?
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Mike's directions for updating firmware required a re lock.
How to flash?
(bootloader needs to be relocked)
Re-lock your bootloader (this will most probably wipe content of your device)
Copy downloaded .zip to fastboot.exe location (e.g. c:/SDK/platform-tools/fastboot.exe)
Re-name .zip file to firmware.zip
Open command prompt
Boot your device in fastboot mode (vol down + power ===> fastboot)
Connect device to the PC
In command prompt cd to fastboot.exe location
Make sure you have correct modeid and cidnum (type: fastboot getvar all)
Type: fastboot oem lock (if your device is not relocked yet)
Type: fastboot oem rebootRUU and wait for device to reboot
Type: fastboot flash zip firmware.zip and wait for process to complete
Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
Type: fastboot flash zip firmware.zip and wait for process to complete
Type: fastboot reboot
Unlock your bootloader and flash custom recovery if you are going to use custom ROM.
Click to expand...
Click to collapse
Whaines said:
Mike's directions for updating firmware required a re lock.
Click to expand...
Click to collapse
If u r s_off ..u dont need to relock bootloader mike clearly stated tht in his post read properly before u even proceed
Sent from my HTC One using xda app-developers app
vaibhav satam said:
If u r s_off ..u dont need to relock bootloader mike clearly stated tht in his post read properly before u even proceed
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Yup. I am and was s-on and followed directions. So why can't I unlock again?
Whaines said:
Yup. I am and was s-on and followed directions. So why can't I unlock again?
Click to expand...
Click to collapse
Unlock boot loader using HTC Dev instructions again?
Sent from my HTC One using xda app-developers app
you will need a new unlock bin file from HTC
Jcc1dls said:
you will need a new unlock bin file from HTC
Click to expand...
Click to collapse
Yes, and I've received one (and then kept trying and got about 30 more). I can flash it just fine but the screen on my phone never pops up to accept the unlock. This is my issue. There is no error message on the flash. It just doesn't show up and I can't accept the unlock.
Whaines said:
Yes, and I've received one (and then kept trying and got about 30 more). I can flash it just fine but the screen on my phone never pops up to accept the unlock. This is my issue. There is no error message on the flash. It just doesn't show up and I can't accept the unlock.
Click to expand...
Click to collapse
S-On, right? :crying:
1- was that a signed firmware package
2- did the update go all the way (ie you flashed it twice in a row, first one came back with "flush again immediately" and you did)
3- you confirmed everything was updated by checking your "fastboot getvar all"
4- bootloader also shows the correct firmware
if yes to above, try a factory reset in bootloader and/or stock recovery, then try a new unlock token, and hope it works.
nkk71 said:
S-On, right? :crying:
1- was that a signed firmware package
2- did the update go all the way (ie you flashed it twice in a row, first one came back with "flush again immediately" and you did)
3- you confirmed everything was updated by checking your "fastboot getvar all"
4- bootloader also shows the correct firmware
if yes to above, try a factory reset in bootloader and/or stock recovery, then try a new unlock token, and hope it works.
Click to expand...
Click to collapse
Yes, S-ON since getting S-OFF on hboot 1.5 is a pain.
I'm almost certain it was a signed firmware otherwise it wouldn't have even be able to have been flashed.
The firmware update was successful, after flashing twice. I can successfully flash that firmware and ..1540.2
Getvar shows the new firmware, as does the bootloader.
Here's the getvar:
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.22.3263.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.06.1540.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ***
(bootloader) imei: ***
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4283mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bee46337
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
I just don't understand why I can't get the popup on my phone. That's what I get for trying to do it the right way, I guess =(.
I'd like to at least get stock back on the phone so I can have a working phone but I can't find an RUU that will work, my firmware is too new for any that I've found. =(
Should have done s-off. No point in modding without it.
Sent from my HTC One using Tapatalk
No unlock acknowledgment
I had the same issue with my first HTC One, it was a tmobile version. I ended up having to RUU whick alligned the firmware, hboot, rom, and recovery to the same versions. Boot and go through the setup. shut down. reboot. shutdown. boot into fastboot. create a new user with HTC, submit your token. Reboot your PC. Send the bin file to the device. unlock. powerdown. flash recovery. powerdown. enter recovery. powerdown and accept the install of SU. boot into the stock ROM. powerdown. You should be set to go.
Jcc1dls said:
I had the same issue with my first HTC One, it was a tmobile version. I ended up having to RUU whick alligned the firmware, hboot, rom, and recovery to the same versions. Boot and go through the setup. shut down. reboot. shutdown. boot into fastboot. create a new user with HTC, submit your token. Reboot your PC. Send the bin file to the device. unlock. powerdown. flash recovery. powerdown. enter recovery. powerdown and accept the install of SU. boot into the stock ROM. powerdown. You should be set to go.
Click to expand...
Click to collapse
I can't find an RUU for 4.06.1540.X though. =( I believe that will fix my problem but the solution is not out there.
xcrazydx said:
Should have done s-off. No point in modding without it.
Click to expand...
Click to collapse
At the time I modded there was no solution for S-OFF for 1.5+.
As for now, the only thing I seem to be able to successfully flash via RUU are the two 4.06 firmwares from @mike1986. Unfortunately, it's just firmware and not a full RUU so I can't boot into anything but the bootloader. Any hints on where I can find a stock rom that it will let me install via fastboot since I don't have a custom recovery?
Run a ruu exe
Sent from my HTC One using Tapatalk
xcrazydx said:
Run a ruu exe
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Code:
target reported max download size of 1514139648 bytes
sending 'zip' (1103159 KB)...
OKAY [ 36.684s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 148.740s
=/ Can't seem to find one that passes the signature verification.
Whaines said:
Code:
target reported max download size of 1514139648 bytes
sending 'zip' (1103159 KB)...
OKAY [ 36.684s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 148.740s
=/ Can't seem to find one that passes the signature verification.
Click to expand...
Click to collapse
Your CID is still CWS__001.
Get the AT&T RUU from HTC and run it. Then start the bootloader unlock process all over.
Once you've got a working phone, then attempt to s-off using rumrunner with a live CD/USB of a Linux distribution.
Sent from my HTC One using xda app-developers app
ilal2ielli said:
Your CID is still CWS__001.
Get the AT&T RUU from HTC and run it. Then start the bootloader unlock process all over.
Once you've got a working phone, then attempt to s-off using rumrunner with a live CD/USB of a Linux distribution.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I really appreciate all the help, but there either is no AT&T RUU that will run with the firmware on my phone (afaik you can't go backward when you're S-ON), or it's not where I'm able to find it on the internet. I've looked here and htc1guru.com.
Whaines said:
I really appreciate all the help, but there either is no AT&T RUU that will run with the firmware on my phone (afaik you can't go backward when you're S-ON), or it's not where I'm able to find it on the internet. I've looked here and htc1guru.com.
Click to expand...
Click to collapse
That might be the case then...
I ran this RUU:
http://www.htc1guru.com/dld/ruu_m7_...3_10-38j-1157-04_release_334235_signed_2-exe/
I used it go return to stock for a warranty exchange and had the 3.62.401.1 firmware at the time, but I was s-off.
Hopefully someone knows a way to get a ROM back on the phone so that you can get the bootloader unlocked.
Sent from my HTC One using xda app-developers app
I'm on ARHD 31.6 which is Android 4.3.
Would like to be KitKat.
Can I get to the T-Mo OTA from here somehow, or am I better off with:
http://www.htc1guru.com/dld/ruu-zip...157-04_release_336982_signed_2_decrypted-zip/
metropical said:
I'm on ARHD 31.6 which is Android 4.3.
Would like to be KitKat.
Can I get to the T-Mo OTA from here somehow, or am I better off with:
http://www.htc1guru.com/dld/ruu-zip...157-04_release_336982_signed_2_decrypted-zip/
Click to expand...
Click to collapse
To update my One (that is S-OFF), I relocked the bootloader and loaded that RUU which put it on 4.3, then let it do the OTAs that brought it first to 4.4.2/Sense 5.5, then the OTA to 4.4.2/Sense 6.0. Then I re-unlocked and rooted it. I run the stock T-Mobile ROM that is rooted and using the ElementalX 14.2 kernel.
Fuzi0719 said:
To update my One (that is S-OFF), I relocked the bootloader and loaded that RUU which put it on 4.3, then let it do the OTAs that brought it first to 4.4.2/Sense 5.5, then the OTA to 4.4.2/Sense 6.0. Then I re-unlocked and rooted it. I run the stock T-Mobile ROM that is rooted and using the ElementalX 14.2 kernel.
Click to expand...
Click to collapse
may I ask you why you have re-locked and re-unlocked bootlader?
Fuzi0719 said:
To update my One (that is S-OFF), I relocked the bootloader and loaded that RUU which put it on 4.3, then let it do the OTAs that brought it first to 4.4.2/Sense 5.5, then the OTA to 4.4.2/Sense 6.0. Then I re-unlocked and rooted it. I run the stock T-Mobile ROM that is rooted and using the ElementalX 14.2 kernel.
Click to expand...
Click to collapse
K, Darn the Luck ! ! !
I'm looking to run the same as you actually.
metropical said:
K, Darn the Luck ! ! !
I'm looking to run the same as you actually.
Click to expand...
Click to collapse
you can use that zip or a RUU exe file available there htc1guru but you need tell your getvar all without imei
If your firmware version is lower than this ruu zip then you can flash it with S On if higher you need S off
So tell us getvar all
from HTC One
getvar all
yatindroid said:
you can use that zip or a RUU exe file available there htc1guru but you need tell your getvar all without imei
If your firmware version is lower than this ruu zip then you can flash it with S On if higher you need S off
So tell us getvar all
from HTC One
Click to expand...
Click to collapse
would I need to lock the bootloader again?
Martin:~ fritz$ fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.03
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.24.531.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4182mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-412e361e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all:
You are on 3.24.531.3 so you can flash that zip even with S On
Your phone S off that's very good so go ahead flash it
from HTC One
yatindroid said:
You are on 3.24.531.3 so you can flash that zip even with S On
Your phone S off that's very good so go ahead flash it
Click to expand...
Click to collapse
flashing zip fails, nearly instantly
Fuzi0719 said:
To update my One (that is S-OFF), I relocked the bootloader and loaded that RUU which put it on 4.3, then let it do the OTAs that brought it first to 4.4.2/Sense 5.5, then the OTA to 4.4.2/Sense 6.0. Then I re-unlocked and rooted it. I run the stock T-Mobile ROM that is rooted and using the ElementalX 14.2 kernel.
Click to expand...
Click to collapse
I relocked and tried the HTC1guru RUU for 3.24.531.3 (T-MOB010)
failed.
metropical said:
I relocked and tried the HTC1guru RUU for 3.24.531.3 (T-MOB010)
failed.
Click to expand...
Click to collapse
no need to relock when you're s-off.
can you copy/paste command prompt/terminal output of the commands you ran.
PS: did you check MD5 of the download?
nkk71 said:
no need to relock when you're s-off.
can you copy/paste command prompt/terminal output of the commands you ran.
PS: did you check MD5 of the download?
Click to expand...
Click to collapse
I thought not, but I tried the relock when the zip wouldn't flash.
hmmm, there's an issue with the MD5, so I'm dl'g again from htc1guru.
30 mins left to dl. I'll report back if the md5 is correct this time
metropical said:
flashing zip fails, nearly instantly
Click to expand...
Click to collapse
flashing zip fail means some stock apps missing data/preload apps
from HTC One
now the md5 is right but using TWRP 2.6.3.3 to flash fails.
??
is there some reason I'd have to adb or fastboot rather than TWRP to flash this RUU?
metropical said:
now the md5 is right but using TWRP 2.6.3.3 to flash fails.
??
Click to expand...
Click to collapse
flash in fastboot not in twrp
Put zip in fastboot folder in computer
Command fastboot oem rebootRUU
fastboot flash zip xxxxx.zip
fastboot flash zip xxxxx.zip
fastboot reboot oem
xxxx is zip file name
You have to flash it 2 times that's why flash zip command 2 times
from HTC One
yatindroid said:
flash in fastboot not in twrp
Put zip in fastboot folder in computer
Command fastboot oem rebootRUU
fastboot flash zip xxxxx.zip
fastboot flash zip xxxxx.zip
fastboot reboot oem
xxxx is zip file name
You have to flash it 2 times that's why flash zip command 2 times
from HTC One
Click to expand...
Click to collapse
just realized this, doh!
metropical said:
just realized this, doh!
Click to expand...
Click to collapse
after flashing zip fastboot reboot-bootloader will complete last step of flashing after that reboot oem
from HTC One
yatindroid said:
after flashing zip fastboot reboot-bootloader will complete last step of flashing after that reboot oem
from HTC One
Click to expand...
Click to collapse
done
back to OEM and OTA updating to KK.
Thanks,
alray said:
may I ask you why you have re-locked and re-unlocked bootlader?
Click to expand...
Click to collapse
I've never gotten an RUU to work while the bootloader is unlocked, on any HTC phone I've had. Relocking the bootloader the RUU works as designed. Also, the OTA updates from T-Mobile will not install with an unlocked bootloader.
Fuzi0719 said:
I've never gotten an RUU to work while the bootloader is unlocked, on any HTC phone I've had. Relocking the bootloader the RUU works as designed. Also, the OTA updates from T-Mobile will not install with an unlocked bootloader.
Click to expand...
Click to collapse
apparently the RUU will install, but alas I'm between unlocked and locked.
oh boy
had to relock, then unlock.
flash TWRP and SuperSU
seems to be ok now.
metropical said:
apparently the RUU will install, but alas I'm between unlocked and locked.
oh boy
Click to expand...
Click to collapse
try with unlocked if not then lock & try
Flashing will not lock your phone
from HTC One
Hello everyone,
I am trying to get S-ON and I cant seem to figure it out, here is a little bit of background information you may need to provide proper help.
------------------------------------------------------------------
Background info:
- HTC One M7
- I have a LOCKED Bootloader
- I have tried "fastboot oem writesecureflag 3" command to try to set S-ON but i got this error: "partitions siganture failed"
- I have stock recovery
------------------------------------------------------------------
If someone can help me it would be greatly appreciated.
slicer812 said:
Hello everyone,
I am trying to get S-ON and I cant seem to figure it out, here is a little bit of background information you may need to provide proper help.
------------------------------------------------------------------
Background info:
- HTC One M7
- I have a LOCKED Bootloader
- I have tried "fastboot oem writesecureflag 3" command to try to set S-ON but i got this error: "partitions siganture failed"
- I have stock recovery
------------------------------------------------------------------
If someone can help me it would be greatly appreciated.
Click to expand...
Click to collapse
post your fastboot getvar all minus serial and IMEI and your bootloader screen
clsA said:
post your fastboot getvar all minus serial and IMEI and your bootloader screen
Click to expand...
Click to collapse
What is "getvar" and also why would you need my IMEI?
Here is a pic of my bootloader.
slicer812 said:
What is "getvar" and also why would you need my IMEI?
Here is a pic of my bootloader.
Click to expand...
Click to collapse
you have a Verizon HTC one ...why would you want s-on ?
it may be impossible to ever s-off again and you'll be stuck with stock
I said Minus your Serial and IMEI
clsA said:
you have a Verizon HTC one ...why would you want s-on ?
it may be impossible to ever s-off again and you'll be stuck with stock
I said Minus your Serial and IMEI
Click to expand...
Click to collapse
The reason I would want S-ON is to update to HTC Sense 6 Verizon does not allow updates to go through with S-OFF, as I was told by HTC, I have tested updating my device it wont work.
slicer812 said:
The reason I would want S-ON is to update to HTC Sense 6 Verizon does not allow updates to go through with S-OFF, as I was told by HTC, I have tested updating my device it wont work.
Click to expand...
Click to collapse
you phone will update with s-off
you need stock recovery
you should be using these forums before you screw up completely
http://forum.xda-developers.com/verizon-htc-one/general
clsA said:
you phone will update with s-off
you need stock recovery
Click to expand...
Click to collapse
I have the stock recovery though. And when i called HTC they said it will only update with S-ON.
slicer812 said:
I have the stock recovery though. And when i called HTC they said it will only update with S-ON.
Click to expand...
Click to collapse
lol, what did you think they would say ...shakes head
go here and do some reading
http://forum.xda-developers.com/verizon-htc-one/general
clsA said:
lol, what did you think they would say ...shakes head
go here and do some reading
http://forum.xda-developers.com/verizon-htc-one/general
Click to expand...
Click to collapse
I have looked up many things like that I just cant figure out what else i need to do I have tried restoring S-On by doing this "fastboot oem writesecureflag 3" then I get this error "partitions siganture failed"
Any suggestions?
And by the way I appreciate all your help.
slicer812 said:
I have looked up many things like that I just cant figure out what else i need to do I have tried restoring S-On by doing this "fastboot oem writesecureflag 3" then I get this error "partitions siganture failed"
Any suggestions?
And by the way I appreciate all your help.
Click to expand...
Click to collapse
regardless of what HTC told you you don't need s-on to take the OTA ...
have you downloaded the OTApkg.zip ?
what stock recovery did you use ?
what is your fastboot getvar all results ? Minus your serial and IMEI
clsA said:
regardless of what HTC told you you don't need s-on to take the OTA ...
have you downloaded the OTApkg.zip ?
what stock recovery did you use ?
what is your fastboot getvar all results ? Minus your serial and IMEI
Click to expand...
Click to collapse
What is "fastboot getvar"? Also where do I get the OTApkg.zip?
slicer812 said:
What is "fastboot getvar"? Also where do I get the OTApkg.zip?
Click to expand...
Click to collapse
fastboot is an app you run from your PC command prompt to flash your phone
fastboot flash recovery recovery.zip is an example
fastboot getvar all outputs the specs for your device
here's mine
C:\fastboot>adb reboot
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000 My phones hboot
(bootloader) version-baseband: 4T.27.3218.14 Radio
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.401.10 < my phones software version
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT34 Removed
(bootloader) imei: 354 Removed
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000 My MID
(bootloader) cidnum: CWS__001 My CID
(bootloader) battery-status: good
(bootloader) battery-voltage: 4316mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.066s
C:\fastboot>
Click to expand...
Click to collapse
here's the only RUU I can find for your phone
http://flyhalf205.com/?dir=RUU/m7vzw
you flash them with fastboot
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip << yes two times
fastboot reboot-bootloader
Just make sure you name the RUU rom.zip not rom.zip.zip and it's in the same folder as fastboot
Don't lock your bootloader and Don't go s=on
just flash the PN07IMG_M7_WL_JB_50_VZW_2.10.605.1_DECRYPT.zip
and take all the OTA updates you want .. then flash custom recovery and re- root your phone if you want.
clsA said:
fastboot is an app you run from your PC command prompt to flash your phone
fastboot flash recovery recovery.zip is an example
fastboot getvar all outputs the specs for your device
here's mine
here's the only RUU I can find for your phone
http://flyhalf205.com/?dir=RUU/m7vzw
you flash them with fastboot
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip << yes two times
fastboot reboot-bootloader
Just make sure you name the RUU rom.zip not rom.zip.zip and it's in the same folder as fastboot
Click to expand...
Click to collapse
I used flashify app to flash my recovery but I backed up my stock recovery. My phone is on the stock recovery right now and its been on stock for over a day now. I tried to issue the command "fastboot getvar" but nothing happened and it listed command options. I do not have too much experience with this lol sorry if I'm annoying you.
slicer812 said:
I used flashify app to flash my recovery but I backed up my stock recovery. My phone is on the stock recovery right now and its been on stock for over a day now. I tried to issue the command "fastboot getvar" but nothing happened and it listed command options. I do not have too much experience with this lol sorry if I'm annoying you.
Click to expand...
Click to collapse
pretty much all i can tell you is, everything you need is above in post #12
Flash the RUU and your phone will redownload and install the updates one at a time.
Don't Relock the bootloader
Don'T go S-On !
use this custom recovery when you done taking updates
http://techerrata.com/file/twrp2/m7vzw/openrecovery-twrp-2.7.0.1-m7wlv.img
P.S I'm not Annoyed ..I'm just old and grouchy
clsA said:
pretty much all i can tell you is, everything you need is above in post #12
Flash the RUU and your phone will redownload and install the updates one at a time.
Don't Relock the bootloader
Don'T go S-On !
use this custom recovery when you done taking updates
http://techerrata.com/file/twrp2/m7vzw/openrecovery-twrp-2.7.0.1-m7wlv.img
P.S I'm not Annoyed ..I'm just old and grouchy
Click to expand...
Click to collapse
What if I install the RUU and I cant update my phone? <-- Im not sure if thats even possible. lol
Couldn't I just call verizon and have them push an RUU to my phone? They said they could do that.
elsaltu vers
slicer812 said:
What if I install the RUU and I cant update my phone? <-- Im not sure if thats even possible. lol
Couldn't I just call verizon and have them push an RUU to my phone? They said they could do that.
Click to expand...
Click to collapse
Also, would installing the RUU wipe my phone?
Have somewhat similar problem
have RUU flashed should be completely stock, but can't S-ON
https://www.dropbox.com/s/33jun0xivk0wamt/Screenshot 2014-07-13 00.02.23.png
Heres the getvar all
Btw, does the RUU contains stock recovery?
slicer812 said:
Also, would installing the RUU wipe my phone?
Click to expand...
Click to collapse
Yes RUU wipes everything
Sent from my HTC One_M8 using Tapatalk 4
---------- Post added at 09:49 PM ---------- Previous post was at 09:48 PM ----------
alwinwh said:
Have somewhat similar problem
have RUU flashed should be completely stock, but can't S-ON
https://www.dropbox.com/s/33jun0xivk0wamt/Screenshot 2014-07-13 00.02.23.png
Heres the getvar all
Btw, does the RUU contains stock recovery?
Click to expand...
Click to collapse
Yes RUU is stock everything
Don't go S-on ever!!
Sent from my HTC One_M8 using Tapatalk 4
clsA said:
Yes RUU wipes everything
Sent from my HTC One_M8 using Tapatalk 4
Click to expand...
Click to collapse
What if I install an RUU and I still can't update my phone? Also, couldn't I call Verizon and have them puch an RUU to my phone, they said they can do that?
slicer812 said:
What if I install an RUU and I still can't update my phone? Also, couldn't I call Verizon and have them puch an RUU to my phone, they said they can do that?
Click to expand...
Click to collapse
Just flash the RUU and take the updates
Sent from my HTC One_M8 using Tapatalk 4