[Help]ICS 4.0.3 + Kernel? can use NTFS? - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

When I use firmware 2.3.6 +Kernel Abysus (I can use my sdcard in NTFS format)
Today, after update to 4.0.3 my Galaxy Note can't read sdcard with NTFS format.
Help me. Thanks

mathuatden said:
When I use firmware 2.3.6 +Kernel Abysus (I can use my sdcard in NTFS format)
Today, after update to 4.0.3 my Galaxy Note can't read sdcard with NTFS format.
Help me. Thanks
Click to expand...
Click to collapse
Because Abysus kernel enables it..
Wait for a custom ICS kernel to support NTFS
And finally.. WRONG SECTION!!

benthian89 said:
Because Abysus kernel enables it..
Wait for a custom ICS kernel to support NTFS
And finally.. WRONG SECTION!!
Click to expand...
Click to collapse
THANKS

Thread moved
Questions DO NOT belong in Development.

Related

[Q] Need Froyo Custom Rom

I need a Froyo based custom ROM for my galaxy mini.
I am facing some wifi issues with the gingerbread roms like cm7,emanon and also ics based ones.
I need a Custom ROM based on froyo. Also my galaxy mini, when running stock froyo ROM(ddka7) lags frequently.
To be able to use wifi at my home i need froyo roms.
Can you guys please suggest any Froyo based custom ROM for sgm. Also do the stock Froyo Roms of sgm support init.d ?
Please Reply ASAP. Thanks in advance.
Really ? If you need to flash Custom ROM you need ClockWorldMod Recovery (CWMR), and CWM need Gingerbread to work !
So answer is = NO
we have cwm for froyo but no custom rom. so bad luck
init.d?
F4uzan said:
Really ? If you need to flash Custom ROM you need ClockWorldMod Recovery (CWMR), and CWM need Gingerbread to work !
So answer is = NO
Click to expand...
Click to collapse
And what about init.d? Do the stock Froyo firmwares of SGM support init.d scripts like AdrenalnEngine/slaidyboost? Thanks for earlier advice.
sasank360 said:
And what about init.d? Do the stock Froyo firmwares of SGM support init.d scripts like AdrenalnEngine/slaidyboost? Thanks for earlier advice.
Click to expand...
Click to collapse
N O, maybe?
those script will work if you got success in enabling init.d
to enable init.d try the below command
Code:
busybox run-parts /system/etc/init.d
dheeraj (dhlalit11) said:
those script will work if you got success in enabling init.d
to enable init.d try the below command
Code:
busybox run-parts /system/etc/init.d
Click to expand...
Click to collapse
Should I run the above command in terminal emulator?
sasank360 said:
Should I run the above command in terminal emulator?
Click to expand...
Click to collapse
Yes, if not there then where ?
F4uzan said:
Yes, if not there then where ?
Click to expand...
Click to collapse
Hey what about Vanilla ROM? Isn't it based on froyo. If so can you give me the link.
sasank360 said:
Hey what about Vanilla ROM? Isn't it based on froyo. If so can you give me the link.
Click to expand...
Click to collapse
is there any vanilla rom
try this... i only have googled for it so i didn't tryied it.... but if you want you can try...
http://forum.xda-developers.com/showpost.php?p=14678040&postcount=315
dheeraj (dhlalit11) said:
is there any vanilla rom
Click to expand...
Click to collapse
there was, made by parasmi, but it was gb and i can't find it anymore.
!edit!
apparently there is froyo and gingerbread version
You want a froyo ROM and jellybean is out!!!!!!!!!! Dude I suggest you to checkout akop or cm10 by the whisp they are both good roms but you need to be on gingerbread in order to flash them using CWM so good luck.
Sent from my GT-S5570 using xda premium
if you want all things to work then try stock gingerbread 2.3.6
it is very stable and no wifi issues
Vanilla ROM by parasmi
Android version : 2.2.1
Flash method : Odin Multidownloader
Developer : parasmi
Type : Odex & Deodex
Features :
System, data, and cache partitions converted to Ext4
Pre-rooted
With bootanimation
Busybox commands in recovery mode
Init.d support (running custom scripts during boot)
Added tun.ko (for vpn) and cifs.ko (for mounting network shares)
Overclock Kernel by tj_style
Faster SD-Read Speed
ADB as root
LowMemKiller values adjusted
Darktremor App2SD
Link : Here !
Download : Gamefront Server
it would be good if there is a link to the thread so that we can thank the dev

[Q] rom and kernel

** MOD EDIT: Thread closed at OP request **
hi guys
i'm new user of the galaxy s1 so my question is what's the best rom to use the stable version of cyanogenmod 9.1 or last nightly cm 10?
and what's the best kernel to use?
thanks in advance
midomad said:
hi guys
i'm new user of the galaxy s1 so my question is what's the best rom to use the stable version of cyanogenmod 9.1 or last nightly cm 10?
and what's the best kernel to use?
thanks in advance
Click to expand...
Click to collapse
Hmm. A lot of threads to read in the development section for you there are. Answers you will find.
-
But as I am kind:
I think the best beginner roms with great benefit are darkys roms. But since u have to flash cm9 to flash darkys v11 black, you can also stay with cm9.
I think the stable 9.1 is a good choice with either semaphore 1.3.0 kernel or devils 1.0.3 kernel.
Cm10 is still too unstable for me, but I am sure there are other opinions.
Sent from my GT-I9000 using xda app-developers app
moriansafas said:
Hmm. A lot of threads to read in the development section for you there are. Answers you will find.
-
But as I am kind:
I think the best beginner roms with great benefit are darkys roms. But since u have to flash cm9 to flash darkys v11 black, you can also stay with cm9.
I think the stable 9.1 is a good choice with either semaphore 1.3.0 kernel or devils 1.0.3 kernel.
Cm10 is still too unstable for me, but I am sure there are other opinions.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
thank you
now that i have instaled cm stable 9.1
is there any script to flash or kernel?
and what about memory do i need to install any script?
midomad said:
thank you
now that i have instaled cm stable 9.1
is there any script to flash or kernel?
and what about memory do i need to install any script?
Click to expand...
Click to collapse
In CM, you are flashing kernels, modems, mods - via CMW (flash zip from sdcard).
I think ICS - based roms don't need any memory tweaks.
midomad said:
thank you
now that i have instaled cm stable 9.1
is there any script to flash or kernel?
and what about memory do i need to install any script?
Click to expand...
Click to collapse
CM9.1's stock kernel works well.
IMHO If you're not looking for specific tweaks, you don't need to flash a different kernel.
what's about memory(storage)?
do i need to install anything to expand it?
midomad said:
what's about memory(storage)?
do i need to install anything to expand it?
Click to expand...
Click to collapse
Storage is physical memory. You have to buy a external microSD card or delete apps to get more.
If you are talking about ram: there are tweaks in the kernels mentioned above.
Sent from my GT-I9000 using xda app-developers app
Hi guys,
I'm running on CyanogenMod 9.1.
Which kernel i can use to overclock CPU? Is siyah kernel compatible with CM9??
Please help.

[SCRIPT][KERNEL PATCHER] PSN MEMORY-MOD-v2 + Swapall-v3.0

PSN>> MEMORY-MOD-v2 SwapAll-v3.0 KERNEL MODDER
USE THIS AT YOUR OWN RISK​
INFO:
MEMORY-MOD
SD-EXT partition (/dev/block/mmcblk0p2) on phone's memory card is mounted as /data instead of original internal data partition(stl13)
SWAPALL v3.0
Original Internal Storage (/dev/stl13 on stock GB & /dev/block/stl13 on AOSP) is formatted to be used as swap partition entirely so as to fully take advantage of fast internal data partition and relieving read/write load on memory card.
The third swap partition on memory card created using CWM or MiniTool or Gparted (/dev/block/mmcblk0p3) IF FOUND is used as swap space, with lower priority . So it will be used for swapping only when above mentioned swap partiton on internal data storage is full.
Swappiness set at 30.
Q.) WHATS NEW WITH MEMORY-MOD v2 IN THIS "KERNEL PATCHER" ???
A.) It simply patches an existing flashed kernel on phone
It extracts an existing flashed kernel from the phone
Then it extracts ramdisk from the kernel
Then it patches the required files on ramdisk
Then it builds back ramdisk and compiles back boot.img
Then it flashes the modded boot.img on phone to the phone
REFERENCE Threads: (my ACE threads)
http://forum.xda-developers.com/showthread.php?t=1883211 Memory modded ACE Stock kernels
http://forum.xda-developers.com/showthread.php?t=1960652 Memory modded ACE CM7 kernels
http://forum.xda-developers.com/showthread.php?t=1959779 Memory modded ACE ICS/JB kernels
http://forum.xda-developers.com/showthread.php?t=2184189 SIMILAR KERNEL PATCHER for ACE
PREREQUISITES:
1: Custom kernel to be flashed before installing this script (STOCK based/AOSP/AOKP with ext4 support and init.d support but not Mem-Modded)
2: SD-EXT partition on sdcard formatted to ext4 (u can use this tool PSN_EXT4_Recovery_based_SD-EXT_ONLY_Format_Tool-signed.zip)
3: SWAP support implemented in kernel
4: Atleast 2.1 MB of free space available in /system
5: An SDCARD of CLASS 6 or more (class 4 users please dont report of phone crawling slow!)
NOTE:
1: for fresh install only; user data on original /data will not be moved on /sd-ext; after flashing this script you will have to setup ur phone again.
1: after flashing this you wont be able to directly do a nandroid backup in cwm; so wipe(format) "/data" in recovery before attempting nandroid backup.
2: do not use any int.d script to expand memory using /sd-ext like S2E or a2sd or cronmod or a2sdx etc with this mod else your phone will not boot
3: your phone will boot always as first boot with this script if no memory-card inserted or memory-card inserted without a sd-ext partition
4: Memory-Mod v2 will delete the init.d scrips of adrenaline engine which when unmodified is not compatible with Memory-Mods
5: if your rom has Adrenaline Engine 4.3 or 4.4 which has not been modified by for compatibility with Memory-Mod then you can reflash a compatible Adrenaline Engine 4.4 by flashing this(STOCK version / CM version) AFTER flashing the MEMORY-MOD script.
6: to reflash newer fixed versions of this mod you have to reflash ur non-patched kernel or rom and then flash this kernel patcher in recovery.
Some info:
PSN_STOCK-GB_MEM-MOD-v2_SWAPALLv3.0 : coming soon (provide me with stock-based custom kernel link or boot.img)
PSN_CM7.2-GB-official_MEM-MOD-v2_SWAPALLv3.0 : will work on kernels on official cm7.2 roms
PSN_CM10.1-JB_MEM-MOD-v2_SWAPALLv3.0 : will work on unofficial cm10.1 kernels in roms like Rohans CM10.1 builds
ICS users can try JB version... its almost same .. should work... report if it doesnt work for u
UNINSTALL METHOD: (to get back to old-school 150MB internal data)
1: flash your original non-modded kernel or custom rom
2: flash PSN_factory_reset_EXT4_Recovery_based_Format_Tool-signed.zip
3: you need to setup your phone all over again for old-school 150MB internal data.
CHANGELOGS​
Memory-Mod v2
boot.img extracted from bml8 partition on phone
it is split into kernel zImage and ramdisk
it extracts ramdisk and patches required files
it packs the modded ramdisk and builds back boot.img ready to be flashed back to phone
it flashes the boot.img to phone !!
hello psn..nice to see u in mini section
will try it out and report..thanks
edit = maybe u can build us ur kernel with battery extender modules ? just a suggestion..
Nice work.. nice to see an Indian, Maharashtrian from Aamchi Mumbai..!!
A chemical engineer n still interest in android...!! I need to contact u.. for some tips for my future studies..
Awesome I had this idea and googled around but nothing for Jellybean 4.2 or like that. Everyone nays for that SD wear.
The Alchemist said:
hello psn..nice to see u in mini section
will try it out and report..thanks
edit = maybe u can build us ur kernel with battery extender modules ? just a suggestion..
Click to expand...
Click to collapse
possible
Sent from I9300 Jellybam v6.7 4.2.2 (CM10.1+AOKP+PAC) + Yank Kernel v1.5 with latest Mali 400MP driver support.
psndna88 said:
possible
Sent from I9300 Jellybam v6.7 4.2.2 (CM10.1+AOKP+PAC) + Yank Kernel v1.5 with latest Mali 400MP driver support.
Click to expand...
Click to collapse
Can I install this in rohan builds?
Enviado desde mi GT-P3110 usando Tapatalk 2
moliverac8 said:
Can I install this in rohan builds?
Enviado desde mi GT-P3110 usando Tapatalk 2
Click to expand...
Click to collapse
thats a cm10.1 JB ... provide me with its boot.img in its zip and ill upload a JB version too
Sent from I9300 Jellybam v6.7 4.2.2 (CM10.1+AOKP+PAC) + Yank Kernel v1.5 with latest Mali 400MP driver support.
psndna88 said:
thats a cm10.1 JB ... provide me with its boot.img in its zip and ill upload a JB version too
Sent from I9300 Jellybam v6.7 4.2.2 (CM10.1+AOKP+PAC) + Yank Kernel v1.5 with latest Mali 400MP driver support.
Click to expand...
Click to collapse
Here you are https://www.dropbox.com/s/5seqed4y318uvp9/boot.img
Enviado desde mi GT-P3110 usando Tapatalk 2
JB support available
PSN_CM10.1-JB_MEM-MOD-v2_SWAPALLv3.0 : will work on unofficial cm10.1 kernels in roms like Rohans CM10.1 builds
feedback !!!
Didn't work for both AOKP and CM10.1 Tried various things that might have went wrong from my side. I am using CWMR 6.0.2.7. Other than that no script. Stock roms. Ur patch runs fine. Phone boots fine. But no SD-Ext mounted nor Internal Mem is mounted as swap.
Tried with 5.0.2.8 Again nothing on both roms.
ill recheck..
Sent from I9300 Jellybam v6.7 4.2.2 (CM10.1+AOKP+PAC) + Yank Kernel v1.5 with latest Mali 400MP driver support.
can you do it for cm10 link to boot.img
https://www.dropbox.com/s/6g3ozr6lbep7nb3/boot.img
prafiles said:
Didn't work for both AOKP and CM10.1 Tried various things that might have went wrong from my side. I am using CWMR 6.0.2.7. Other than that no script. Stock roms. Ur patch runs fine. Phone boots fine. But no SD-Ext mounted nor Internal Mem is mounted as swap.
Click to expand...
Click to collapse
Confirmed.
not working on Cm 10.1 build 20130310
prafiles said:
Didn't work for both AOKP and CM10.1 Tried various things that might have went wrong from my side. I am using CWMR 6.0.2.7. Other than that no script. Stock roms. Ur patch runs fine. Phone boots fine. But no SD-Ext mounted nor Internal Mem is mounted as swap.
Click to expand...
Click to collapse
prafiles said:
Tried with 5.0.2.8 Again nothing on both roms.
Click to expand...
Click to collapse
darkshadow1997 said:
can you do it for cm10 link to boot.img
https://www.dropbox.com/s/6g3ozr6lbep7nb3/boot.img
Click to expand...
Click to collapse
ic92 said:
Confirmed.
not working on Cm 10.1 build 20130310
Click to expand...
Click to collapse
uploaded another reworked CM10.1 kernel patcher... try it...
psndna88 said:
uploaded another reworked CM10.1 kernel patcher... try it...
Click to expand...
Click to collapse
Still not working. Same results as before.
tried this on CM7, booted but no ext4 partition
Don't working on CM10.1
Enviado desde mi GT-S5570 usando Tapatalk 2

[Q] [CM7.2] Kernel with ext4 support?

Can anyone help me to find a good kernel with ext4 support for cm7.2 rom? Thanks!
:laugh::laugh::laugh::laugh:brother for you i have these
:laugh::laugh::laugh:
1 space kernel its link http://forum.xda-developers.com/showthread.php?t=2215454
:laugh::laugh::laugh:
2 fire kernel its link http://forum.xda-developers.com/showthread.php?t=1675023
have fun :good::good::good::good:
aditya rathee said:
:laugh::laugh::laugh::laugh:brother for you i have these
:laugh::laugh::laugh:
1 space kernel its link http://forum.xda-developers.com/showthread.php?t=2215454
:laugh::laugh::laugh:
2 fire kernel its link http://forum.xda-developers.com/showthread.php?t=1675023
have fun :good::good::good::good:
Click to expand...
Click to collapse
I'm currently using firekernel... If I create link2sd's script for ext4 it doesn't work while if I create link2sd's script for ext3 (despite I have an ext4 partition) it works...What's the problem?
And...which of that kernel is the best for you?
rapkiller91 said:
I'm currently using firekernel... If I create link2sd's script for ext4 it doesn't work while if I create link2sd's script for ext3 (despite I have an ext4 partition) it works...What's the problem?
And...which of that kernel is the best for you?
Click to expand...
Click to collapse
if you have an ext partition based on ext3 then its no harm and sometimes it happens that ext4 is not supported but it should not happen on fire kernel even though no problem in ext3 and which kernel is better i would say fire kernel {no offense to any developer} according to me but you can also try mounting script on ext 4 after flashing space kernel
:good::good::good::good:

[Q] Cronmod sdext Unofficial

hi i flashing CronMod Unofficial but not worked help me intrnal be full :| i can flashin this scrip on rafael bugies kernel and working
but not working bieltv3 :|
partition on SD card EXT4
ROM : CM 7.2 RC4
kernel : bieltv3 v 3.0 #7 > suport EXT4
pls help me
4550286 said:
hi i flashing CronMod Unofficial but not worked help me intrnal be full :| i can flashin this scrip on rafael bugies kernel and working
but not working bieltv3 :|
partition on SD card EXT4
ROM : CM 7.2 RC4
kernel : bieltv3 v 3.0 #7 > suport EXT4
pls help me
Click to expand...
Click to collapse
First of all it is not the correct section, next time use GT-S5830i Q&A Thread
BTW look at this thread
forum.xda-developers.com/showthread.php?t=2468740

Categories

Resources