Hey guys, I got my Incredible S a while ago. It's a splendid phone. My dad gave it tome as a gift, he bought it from Singapore. I rooted and installed many roms over the course of having it. Up until today I was using the Revolutionary 2.3.0 rom. I was browsing a Diablo 3 app on the phone when suddenly my volume down button (without me pressing it) began to function on its own. I was like "Ok, just restart the phone, probably something bugged." After the restart nothing happened for a while until after 3 minutes its started vibrating in Vibrate mode (Displaying the volume rocker on-screen) I decided to change roms since I have some .zips laying around. I installed MIUI 2.1.16 (a fairly old version I know for certain is working) Still, the issue persisted and after another restart I cannot get past Hboot. My phone is stuck in Hboot cycling the options on its own (without entering them). All my other keys function perfectly except the media button. If anyone has experienced similar issues I'd love to hear some feedback. I've also searched other threads on here, NOTHING found so far.
Cheers,
d.lesov*
Take the back cover off and examine the actual hardware button that sits under the rocker switch. Perhaps it is stuck in the down position. See it you can get it to pop back up.
That was the first thing I did, the key is not stuck and I can freely press it. As a last resort I can send it to a local service shop but I'd like to see if I can manage this at home first. =)
Ok, fast update: by pressing the Volume UP button while pressing the Power button I managed to boot my phone into the rom itself. Now the Volume Down button does not function at all. I'll just run it through a local service shop and see if they can fix it. I was looking to buy a new phone anyways. Might keep this one as for my other carrier's sim card. =)
Related
okay so when my n1 is in sleep, it takes like 3 tries to wake it up. The first time I press the unlock button the unlock screen comes and then goes back to sleep instantly. The second time the lights for the back menu home and search light up and that's it. the third time it works. I'm on froyo. anyone else with this problem?
I have a similar issue.
Sometimes just the capacitive buttons light up and not the screen. I have to make 2 or 3 tries to get it to turn on. Its rare, but its there. It only happened on 2.2.
ok good, me too!
was just looking for this topic.
mine doesnt always turn anything on at all. sometimes the light go on, others nothing. Also trying to turn off the phone is hard as it sleeps straight away with out opening up the power menu.
I have a stock N1, which recently updated to Froyo, with the same problem.
any ideas would be great!
cheers,
lorin.bute said:
I have a similar issue.
Sometimes just the capacitive buttons light up and not the screen. I have to make 2 or 3 tries to get it to turn on. Its rare, but its there. It only happened on 2.2.
Click to expand...
Click to collapse
Also happens on CM 5.0.7.1.
i think it may be a hardware button issue.
I have tried turning mine off (had to pull the battery out) and then to turn it on.
It should turn on readily as it has nothing to do with the OS at that point.
any ideas?
No HW button issue described. HW button works - if it didn't, lights wouldn't go on. It's a wrong reaction on the button, at least that's what OP describes (and me too).
Your N1's power button is dying, it's a known HARDWARE issue. I experienced all of that what you may think a software bug, nut dear friends, prepare to meet HTC or Google for warranty. My N1's power button is dead, I couldn't swap for a new one because I bought it in my country where no official distributor for N1 yet. Sad!
ps: you may try to search for "N1 power button" and see there are more and more reports about this problem.
I've read more than one or two threads on power button issues, and I know what I'm talking about. My power button DOES power up the phone when the battery is taken off the first shot, it DOES wake the phone from standby, it DOES register long presses - there was even one time when a second press was long, and suddenly the screen woke up with power menu, while the first press left it dark with touch button light going on.
Doesn't look even a bit like HW to me. HW would leave the phone dead, non-responsive to touches, or create a loose touch which would translate into several touches - none of those would EVER turn into a phone being on with screen off, and suddenly snapping back to screen on when the SCREEN is touched several times.
Could be your cpu was too busy to accept any inputs.
I have a thread about it here:
http://forum.xda-developers.com/showthread.php?t=692874
Take your time! As for me, I'm using my N1 for 3 months now for the power button to completely dead with everyday use (I didn't use any app to trackball-wake).
As I said, all the things you are yelling I have been through. And I, too, thought it was software problem.
I tried both MCR and Cya with no hope.
Good luck!
ps: One of my friend just told me about his N1's power button issue right after hearing me telling about mine.
This sucks
anyone know where i can buy a new button??
Corrupt SD Card
I had the same issue. I'd press the power button, the bottom four buttons would light up but no screen wake. Only way to get out of it was to pull the battery. It would happen maybe 30-40% of the time. (Nexus One Froyo FRF72)
I think it was due to a corrupt MicroSD card. I recently installed a 32gb card and put some music on it using songbird and possibly didn't safely remove. That's when I started getting issues. Removed the SD card completely and it worked fine. Changed back to the old card and no issues. Then formatted the 32gb and tried again, worked fine. Then I tried to transfer more music, there was an error and I got the same problem. (Cheap ebay card from Hong Kong, that'll teach me).
Anyway, I'd be interested to know if that solved anyone else's problem, because all I see on forums are that it's a faulty power button, but that didn't seem to be the case in my situation.
Cheers,
Dylan
-Witty esoteric statement about science/technology.
Mine is doing kinda the same weird thing but a little different.
When I push the power button the screen comes on but is unresponsive to touch. If I press the power button again the screen dims and then turns off, the home keys light up and then the trackball glows white. The phone then does not respond to the power button for around 10 secs and repeats this behavior 4 or 5 times until it actually starts working correctly and I can swipe my finger to get to the home screen.
It usually does this after being inactive for a period of time, like after sitting overnight.
FRF91
LancherPro Beta 0.6.7.2(maybe the problem?)
jimbobalu said:
Mine is doing kinda the same weird thing but a little different.
When I push the power button the screen comes on but is unresponsive to touch. If I press the power button again the screen dims and then turns off, the home keys light up and then the trackball glows white. The phone then does not respond to the power button for around 10 secs and repeats this behavior 4 or 5 times until it actually starts working correctly and I can swipe my finger to get to the home screen.
It usually does this after being inactive for a period of time, like after sitting overnight.
FRF91
LancherPro Beta 0.6.7.2(maybe the problem?)
Click to expand...
Click to collapse
i have almost the same issue, although mine happened twice when i was on EPE54B but it's been far more common on FRF91
the only difference is my power will continue to turn the back light on and off no matter if the screen has already timed out or not
kobecamp2009 said:
okay so when my n1 is in sleep, it takes like 3 tries to wake it up. The first time I press the unlock button the unlock screen comes and then goes back to sleep instantly. The second time the lights for the back menu home and search light up and that's it. the third time it works. I'm on froyo. anyone else with this problem?
Click to expand...
Click to collapse
I have exactly the same issue. Over in the general forum, there's another thread on this issue. Many, myself included, are reporting that this problem started after the FRF91 update. Can you confirm?
rtx101 said:
Your N1's power button is dying, it's a known HARDWARE issue. I experienced all of that what you may think a software bug, nut dear friends, prepare to meet HTC or Google for warranty. My N1's power button is dead, I couldn't swap for a new one because I bought it in my country where no official distributor for N1 yet. Sad!
ps: you may try to search for "N1 power button" and see there are more and more reports about this problem.
Click to expand...
Click to collapse
Read again carefully. Are you sure your hardware problem was identical to what the OP described? I've noticed a lot of people with obvious hardware problems (i.e., the power button is completely unresponsive) posting on threads like this when they actually have a different problem. It's very confusing.
britoso said:
Could be your cpu was too busy to accept any inputs.
I have a thread about it here:
http://forum.xda-developers.com/showthread.php?t=692874
Click to expand...
Click to collapse
This sounds VERY promising -- thank you britoso!
PS: Are you guys getting the unresponsive unlock slider like britoso describes?
I had this problem when I first flashed CM6 yesterday. Even after wiping and reflashing it was the same. Only way to get out of the black screen was to do a soft reset, power + vol down + trackball. I finally found out that my SD card malfunctioned and was corrupt. I tried reformatting the sd card in an microsd card reader but windows said it could not be reformatted. I finally switched back to another microsd card that was working, wipe and reflashed cm6 and the problem went away. Try backing up all the data on your microsd onto your computer then reformat it and wipe then reflash to see if it works
Edit: ughhhh it just happened again, but not as bad as before, turns back on after second try... maybe i didnt press the trackball hard enough
I know this is a known issue, but I think i got a rare case here.
I had some random issues in the start, before 2.2 came out, when the first
I started getting this issue after going over to 84B(?) and had used the N1 torch (high brightness) till the light started flickering, after that the button hasn't worked at all, EXCEPT inside the flashboot(?) menu, there the button works after about a minute.
Im still lucky enough to the point that the phone starts itself when i remove and insert the battery again (might this mean the power button is already "pushed" in?), also, i installed the trackball wake function just before the power button started malfunctioning so i havn't lost control of my phone just yet.
Does anyone have any tips to get the power button working again?
Get a swap from HTC.
I've done it with a broken power button and unlocked phone.
There's a little problem with that, since I the warranty goes away when you unlock, i took the liberty to open up the phone (removing the warranty sticker over one of the screws). I was happy I did it back then, because my power button started to work abit after that.
Also, I bought my N1 through a reseller on ebay, right after the phone was released, i also live in europe, so i think there will most likely be repair costs to get it fixed.
Has anyone done this before? Does anyone know how much these repairs cost?
I have searched this exact title and came up with 10 pages and I never saw anyone else with this problem. Surely I cannot be the only one.
After the Gingerbread upgrade I was getting the tethering message/force close, during that time my phone started to randomly shut off ( settle down Beavis, this isn't the same question thats been asked a thousand times ) and reboot. I lived with the tethering message problem for as long as I could but my phone became more ignorant day by day. I finally found a fix for the tethering issue and haven't had a return problem with that but now my phone either stays in standby mode ( dark screen ) and refuses to respond to the hard button to wake it up OR once on it refuses to go into standby mode and stays on until I pop the battery or I go into settings and time the screen out in 15 seconds ( often times this doesn't shut it down either ). Sometimes I can get it to come on by multiple pressing the power button ( this can't be healthy ) and the lock screen will flash momentarily just long enough for me to unlock the screen. Other times it will go to the lock screen while I'm in the middle of something.
Every day at some point while it's on and I'm using it, the power button option screen pops up ( silent mode, flight mode, power off ). When I'm done with a call I try to go into standby and it just sets there...ON.
The thought has crossed my mind that the button doesn't work or has a short but I really think it's something else ( I hope ). Can somebody help me? I am not very techie although I have updated the phone three times myself. It is unrooted and 2.3.5
Thank you in advance
I would go with the power button. It's a known issue on captivate.
mrhaley30705 said:
I would go with the power button. It's a known issue on captivate.
Click to expand...
Click to collapse
I stopped by the AT&T store the other day to check on insurance (ends up I didn't have it) and told them about my button not working properly and how the Captivate was notorious for this problem and they all said "We've never heard that". So the gadget gal is in there so she offers to take it apart and check it. She claims there isn't anything wrong with it and that it has the same amount of spring as the volume buttons. She then noticed that when she put the battery back in the phone came on automatically, I said it's not supposed to do that and she agreed but fortunate for me since I cannot turn it on. She then says I'm eligible for an upgrade and try's to sell me a new phone. I don't want a new contract.
So should I try and buy a new button and change it or could it be something else? Thank you in advance.
Are you using a case for your phone by any chance? If yes, is it too tight? Maybe the power button gets stuck because of that sometimes? Just a long shot! You stated that power menu pops up once in awhile when you're using it, is it possible that the way you grip the phone causes that? (Just trying to help and not trying to offend you btw.)
You might want to try flashing UCKK4 with bootloader(use it from the one click master collection of stock rom's) just to make sure that there is no issue with the firmware. It is not likely to fix your problem but it's good to have a clean start. At least that's what I would do to begin with.
Since you're willing to change the power button, why not do an experiment? Remove the power button and see if there is any change? If it works fine then it's the power button that's faulty else it's a hardware problem.
If your phone's power button is in a 'pressed' state, like mine, (turns on automatically when battery is inserted), it is a hardware issue.
Here is a hassle free alternative to turn on the phone when it is in sleep mode, without relying on the power key!! Takes a minute or two only!!
1. Get 'Go launcher' from the app market (play)
2. Get 'Go Locker'
3. Now Enable Go Locker on your device. And you are done!!
When the screen goes black again, Just press the volume button, The screen wakes up!!
Using this method you don't lose the normal functionality of the volume rocker!!
I recalled that I used to have Go Locker on my phone, and that when I pressed the Volume key the screen turned on!!
At that time I found it a little annoying, But now it has turned out to be such a gift!!
* For this method to work, your phone has to be rooted.
The power button is not going to work until the hardware is repaired, I prefer to use this method, because it is a safe and quick method!!
Believe me I looked around the internet and this forum for a fix, The usual method: editing the system files on the phone, and after which the volume button cannot be used to control the volume.
For those looking for a quick fix, just follow my method!
Cheers!
There are also several roms out there that have the volume rocker wake built into the rom without making it completely useless for it intended purpose. As well as several that offer a go to sleep toggle in the notification window so you can lock your phone again.
so this is a hardware issue ? i had been using the go locker i been using but the power button is annoying cus it keep showing the power button options . and killing my battery.
only fix is samsung?
Pretty much every version of cm for cappy has volume rocker wake as an option, because of this common problem. I use app called turn off screen as well.
Natureboyhcg said:
so this is a hardware issue? only fix is samsung?
Click to expand...
Click to collapse
I had the exact same problem with my Epic Touch 4G. Thought it was the ROM, the overclock, etc. I flashed back to (almost) stock, went back to original clock speeds. I couldn't figure out what it the world was causing the issue, until it got worse. Then, I noticed that even brushing past the power button would wake the screen, and about 10 seconds later the phone would reboot.
Long story short, I bought a replacement power switch, soldered it in place, and have had zero problems since!
Several eBay sellers offer the proper replacement switch you'll need.
(They don't include the required skills to properly desolder/solder it, however. It's a tiny switch - about 4mm x 2mm x 1.5mm, and you'll need a good quality fine-tipped soldering iron.)
I just rooted my turbo with Moforoot and it's been O.K. yesterday except the fact that i couldn't install xposed after hours upon hours. I was tired and decided to sleep and my phone fell off my bed and this morning it was dead although the battery was alright. I have a case on my phone and i've dropped it other times. It is also noteworthy saying that today i FELT as if my power button was sort of permanently jammed in my phone - it feels like the power button doesn't come out as much as it should- .
Main concern: my phone has been freezing every so 7-10 minutes after turning it back on, even after deleting and undoing everything that I had done since the day I rooted my droid.
Second Concern: I'm not sure whether my droid's power button normally came with a somewhat deep power button. If anyone can, can you check to see if, when you push in your power button, whether or not the button gets pushed PASSED the phone as in it gets pushed into the phone, unlike the volume buttons. Thanks guys. This problem has made my weekend quite hectic.
It is also worth noting that my phone has had no problems before, so it is fair to conclude that this problem is either due to the rooting, the tampering, or the dropping of the phone.
If anyone would be so generous and would post a video of them pushing their power button, that would be of great help too. Thanks everyone.
-Qarie
Hey - saw your post - I also rooted recently. Separately, was also critical of the right side buttons on a naked XT1254. They are too easily engaged, pocket-pressed or could be "over-pushed" or jarred in a drop.
Buttons: Put your naked phone in a good case that has its own buttons that overlay those on the phone. I use a Tudia hard case. It's bit thick & heavy but the Tudia's buttons take some pressure to push & cannot be pocket-pushed. The case's buttons balance the too-soft touch on phone's buttons nicely. Totally solved over-pushing and no more pocket-pushes.
Root:
I had a couple of crashes post-root too, but tracked it down to a SU conflict between AirPlay and AirAudio BT streaming music or vids from GMusic or DoubleTwist on android>Apple TV>hifi system. Problem solved, gave SU access to AirAudio and took it away from AirPlay and all's right since. Be cautious which apps get SU access and which do not. If your phone crashes, besides a regular restart w/ power button, consider a hard restart pressing screen + both volume buttons at same time. See if the ensuing rooted restart makes the phone behave. It did for me and I've had no probs since. Root freedom has its price! Good luck.
--------------------------------
It is also worth noting that my phone has had no problems before, so it is fair to conclude that this problem is either due to the rooting, the tampering, or the dropping of the phone.
If anyone would be so generous and would post a video of them pushing their power button, that would be of great help too. Thanks everyone.
-Qarie[/QUOTE]
bookman888 said:
Hey - saw your post - I also rooted recently. Separately, was also critical of the right side buttons on a naked XT1254. They are too easily engaged, pocket-pressed or could be "over-pushed" or jarred in a drop.
If your phone crashes, besides a regular restart w/ power button, consider a hard restart pressing screen + both volume buttons at same time.
-Qarie
Click to expand...
Click to collapse
[/QUOTE]
Unfortunately, my power button was "over-pushed" in a drop (putting phone in pocket with gloves on, missed the pocket...oops phone managed to land precisely on the power button) and no longer works. The button is now limp/loose and no longer makes any "clicking" tactile response when pressed. Obviously it does not control the power anymore. I have been afraid to take it into Verizon as there is some clear physical damage near the power button and I am sure I will need to pay to have it warrantied. I wish I would have seen your advice to put it in a case that protected the buttons before it was too late!!
I just wanted to reiterate your point and also ask a follow-up question about your hard restart advice? I have never heard of this method before (pressing screen/both volume buttons). I am a habitual resetter of my devices as I feel like starting with a clean slate always makes them run faster, but unfortunately can't do this anymore unless I let the phone run out of battery completely (which is pretty much impossible with this unit LOL).
Thanks in advance.
I just wanted to reiterate your point and also ask a follow-up question about your hard restart advice? I have never heard of this method before (pressing screen/both volume buttons). I am a habitual resetter of my devices as I feel like starting with a clean slate always makes them run faster, but unfortunately can't do this anymore unless I let the phone run out of battery completely (which is pretty much impossible with this unit LOL).
Thanks in advance.[/QUOTE]
I'm not sure what your question is. I discovered 3 button method of reset and found it worked. Had a few crashes the first days post root but since all's well. Zero crashes in 2 weeks. . Not expert enough to tell you why is works, it just did in my case. If you're apprehensive about verizon repair, find a local phone tech, it shouldn't be that tough or costly to replace a power-on button. Then buy a good case!
bookman888 said:
I'm not sure what your question is. I discovered 3 button method of reset and found it worked. Had a few crashes the first days post root but since all's well. Zero crashes in 2 weeks. . Not expert enough to tell you why is works, it just did in my case. If you're apprehensive about verizon repair, find a local phone tech, it shouldn't be that tough or costly to replace a power-on button. Then buy a good case!
Click to expand...
Click to collapse
I am wondering what exactly this three button method is? I am not rooted so it might not work for me (scared to root with the broken power button! thanks for the advice re: local phone tech, I will look into that), but how does it work? Where do I press on the screen, etc? If you could give me a step by step it could prove very helpful.
Thanks.
jfrostad said:
I am wondering what exactly this three button method is? I am not rooted so it might not work for me (scared to root with the broken power button! thanks for the advice re: local phone tech, I will look into that), but how does it work? Where do I press on the screen, etc? If you could give me a step by step it could prove very helpful.
Thanks.
Click to expand...
Click to collapse
=====================
If your power button is toast, then this is not going to work, but if the power button is functional...
In any screen, just hold down Power + VolUp + VolDown simultaneously for about 3 to 5 seconds or until the phone goes dark.
Then release all 3 buttons and the phone will restart itself in a few seconds with the usual DROID animation screen. No need to press Power-on again.
I'm not a tech but suspect this kind of restart clears a few caches and the phone should run normally on restart, rooted or not. I've done this about 4 or 5 times with no issues. This method will also work if an app "freezes" the phone. It's just another way to restart. Let me know if it works out for u.
bookman888 said:
=====================
If your power button is toast, then this is not going to work, but if the power button is functional...
In any screen, just hold down Power + VolUp + VolDown simultaneously for about 3 to 5 seconds or until the phone goes dark.
Then release all 3 buttons and the phone will restart itself in a few seconds with the usual DROID animation screen. No need to press Power-on again.
I'm not a tech but suspect this kind of restart clears a few caches and the phone should run normally on restart, rooted or not. I've done this about 4 or 5 times with no issues. This method will also work if an app "freezes" the phone. It's just another way to restart. Let me know if it works out for u.
Click to expand...
Click to collapse
Got it. Ya, I guess that won't work for me - I got confused because earlier you said "press screen" so I thought perhaps that might just be the phone screen itself (not the power button). I will look into a local phone tech, this is getting ridiculous!
Workaround . . .
Qarie said:
I just rooted my turbo with Moforoot . . . today i FELT as if my power button was sort of permanently jammed in my phone . . .
Click to expand...
Click to collapse
jfrostad said:
Unfortunately, my power button was "over-pushed" in a drop (putting phone in pocket with gloves on, missed the pocket...oops phone managed to land precisely on the power button) and no longer works. . .
Click to expand...
Click to collapse
Just FYI, I'm using an app+widget called Power Toggles (link below) that offers on-screen tap functions, including power, for rooted devices. The widget bar is customizable, to include adding a button that will give you pretty much all options for restarting your phone: Power off, Reboot, Reboot to Recovery, etc. You have to scroll way down the "Add" list to find the power-related buttons, but there's a "master" button that provides several options on pop-up.
I believe it could serve as a good temporary (or permanent) workaround for a broken power button, as long as the phone is never actually turned off ('cause then you really would need a working power button).
There may be other apps that do some of the same things, but I've been using P.T. for a month or more and I'm extremely happy with it. Here's the app info (browser link):
https://play.google.com/store/apps/details?id=com.painless.pc
( PS: I don't have a Turbo yet, I'm just browsing the forum for info. )
Moondroid said:
Just FYI, I'm using an app+widget called Power Toggles (link below) that offers on-screen tap functions, including power, for rooted devices. The widget bar is customizable, to include adding a button that will give you pretty much all options for restarting your phone: Power off, Reboot, Reboot to Recovery, etc. You have to scroll way down the "Add" list to find the power-related buttons, but there's a "master" button that provides several options on pop-up.
Click to expand...
Click to collapse
Thanks for the helpful and informative post. I already use PowerToggles but am not currently rooted.
No problem. Yeah, I didn't realize it was using root (on my Razr M, at least for the power functions) till I installed it on my unrooted Moto X.