using miniCM9 lately i've noticed that ringtones not workin anymore and only vibration that works , and no idea why is that !!
Maybe u should try to full wipe the phone.
Also make sure that the phone is not in silent mode and the ringtone selected is not silent...
Press THANKS if I tried to help u...
i've made sure of that :/ maybe i'll reinstall the rom afterall
Related
hey guys,
I'm now using Froyo 2.2 XWJPA and every time it reboots, only system volume goes off automatically and I have to get into the sound mode to turn it on. I don' t know what happens to the firmware. I have done nothing to it....just updated to 2.2, fresh one....
If you guys know about this issue, please help me.
Thanks
Hi
Please help, im a total newb and i have problem with my Darky 10.2!
First i had Darky 8.2, used odin, and did all that was asked. Worked fine, even donated to darky that time
then upgraded it to 9.5, but after a 6months started lagging bad... then i decided to put 10.2, and it fixed the lagging and the cellphone got tons faster. But it crashes like crazy:/ No matter, i wanted to put back 9.5, but i cant get into recovery mode!!!!
When my i9000 boots up it gives a lot of screen jumble before the computor voice od darky rom, it gives some jumble after...and sometimes when i open gallery... it crashes a lot on diferent things:/
I have JVQ, it seems important, but i dont even know what that means.
Please help!
Thnx for your time
Try 3 button or get a jig to get in download mode and then flash anyother rom
Sent from my GT-I9000 using XDA App
it dosent want to go into recovery or download mode... thats the problem!
it just freezes when i try the three buttons or via darky configurator
Have you tried with adb?
germaligni said:
Hi
Please help, im a total newb and i have problem with my Darky 10.2!
First i had Darky 8.2, used odin, and did all that was asked. Worked fine, even donated to darky that time
then upgraded it to 9.5, but after a 6months started lagging bad... then i decided to put 10.2, and it fixed the lagging and the cellphone got tons faster. But it crashes like crazy:/ No matter, i wanted to put back 9.5, but i cant get into recovery mode!!!!
When my i9000 boots up it gives a lot of screen jumble before the computor voice od darky rom, it gives some jumble after...and sometimes when i open gallery... it crashes a lot on diferent things:/
I have JVQ, it seems important, but i dont even know what that means.
Please help!
Thnx for your time
Click to expand...
Click to collapse
Download and install DarkyOTA App or DarkyROMTool
Select wipe and install Darkys 10.2.2 using any of this Darky app.
Once you finish installation lets see what will happen..
i tryed that already!
got a restart and then black screen.... and needed to long hold lock button to restart again, and then booted normaly... no instalation happend.
its like recovery is blocked out!
how can i gat around it?
germaligni said:
i tryed that already!
got a restart and then black screen.... and needed to long hold lock button to restart again, and then booted normaly... no instalation happend.
its like recovery is blocked out!
how can i gat around it?
Click to expand...
Click to collapse
try using ADB and force with that to get download mode, or just make usb jig...
for optional option firstly change your included kernel on that rom ...
What is ADB?
I can get into Download mode, but i can go to recovery mode... i Instaled new roms from recovery, what can i do from download mode?
Thnx alot, im so newb and my phone is killing me
Had the same problem !
I flashed back to a stock GS rom, like 2.3.x and, root it, fixed permissions en whipe all date, everything thats whip-a-ble i whiped in recovery mode.
Then flash back Darky, that worked for me.
Hi everyone,after flashing my Galaxy Note with Odin to Sheep ROM V2, vibration stopped working, since then i´ve tried a lot of roms and tricks but vibration sitll doesnt work.
Can you tell me how can i solve this issue? Now im with Romow 5.1 and CWM recovery.
Thanks for your help.
I´ve ordered JIG in order to reset counter for SAT visit
No one knows how to solve this problem i have?
Still without vibration. I need help!
Tried flashing to Sheep v 2.1 but no changes. Any help?
Have you tried installing the app Volume Control+ from the Market and checking the vibrate settings? My last phone (Atrix) got stuck in a mode where it wouldn't vibrate, no matter what I did in settings, but using Volume Control+ I was able to get the vibrate to work again.
Tried it but still without any vibration
So when you open Volume Control the little blue vibrate icons are lit up, but there's still no vibration?
Sent from my GT-N7000 using Tapatalk
thepartybeaver said:
So when you open Volume Control the little blue vibrate icons are lit up, but there's still no vibration?
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
[FONT=Verdana, Helvetica, Arial, sans-serif]That´s it, no vibration at all with all icons lit up.[/FONT]
You said you've tried a lot of other ROMs...have you used Odin to flash your device back to stock? That may be your best bet at this point. Then you can start over again. Have you been making backups?
Sent from my GT-N7000 using Tapatalk
I´ve flashed back to kl7 and kl8 with ODIN, sadly i forgot making backup when i flashed it for the first time.
I still need help with my vibration!!!
Hi fellows. I have weird problem with my phone. I have GingerDX v021 ROM, stock kernel, not overclocked CPU and locked bootloader. My problem is that when someone is calling me phone is not making any sound or even vibrating. I checked in settings and everything is correct. I can't answer any call if I won't look at my phone in the time someone's calling.
Any ideas?
try a factory reset in CWM. if this doesnt help, try this:
1.flash stock ROM
2. test your incoming call sound
3. if it works, root your stock and install xrecovery
4. flash gingerdx013 using xrecovery and test your incoming call sound
5. gingerdx013 has builtin CWM. reboot in cwm
6. install gingerdx021
7. install stock kernel applications for gingerdx (uv dual touch etc)
8. test it
Thanks a lot, man. Now it works
np just hit the thanks button
Hi,
I am using Galaxy Note N7000 for the past 1 year. (OFFICIAL ROM)
I am facing a strange issue since the day I bought this phone... The screen goes black suddenly (this could happen even if the phone is not touched for 3 to 4 hrs. Don't know why this happens) and freezes. If i press any button , the screen will not wake up. During this time, if someone calls me then I will not get any ring, but the other party who calls me gets the ring tone that my phone is ringing. The only way to bring up my phone is , i need to press the power button still the phone reboots.
I tried factory reset twice (both gui mode and the other with Volume UP+HOME+power button)
I tried Wipe cache memory many times.
Pls let me know .. how to get rid of this issue. Should I need to use some other rom. If so pls advice.
I am ready to do any thing to get this phone to work properly.
Regards,
Dennis
It could be a motherboard issue.
Ahh this is simple, this is when your phone just goes to sleep! This can be configured, by changing your kernel! if you're on stock this happens a lot! so Change your kernel it should help a lot! I prefer speedmod or C.O.H ! They may solve this issue! it's not a board issue, don't be worried! and try Good ROMS! not the stock!
Hit Thanks!
thanks
NoteboyTech said:
Ahh this is simple, this is when your phone just goes to sleep! This can be configured, by changing your kernel! if you're on stock this happens a lot! so Change your kernel it should help a lot! I prefer speedmod or C.O.H ! They may solve this issue! it's not a board issue, don't be worried! and try Good ROMS! not the stock!
Hit Thanks!
Click to expand...
Click to collapse
Can you pls let me know exact ROM, which I can use it for better performance. If possible help me with tutorial link too... As I am amateur with this flashing things.. I have seen some videos , but still don't have any hands-on experience.
THis is very simple brother! First you need to have a SD Card, and download Philz kernel and install via Recovery(Volume UP+ Home+ Power) and you need to be on jellybean then it is helpful! or to be on a safer side, download odin and flash the philz or speedmod odin files! they will get you CWM Recovery and Root!
But first I recommend using a kernel if that doesn't help! then Flash a ROM!
I gone through many links... and not able to clearly find what is the philz kernal.
http://forum.xda-developers.com/showthread.php?t=1901191
Where to download the kernal.. ??
Should I need to take backup and factory reset the phone before doing this activity. Later can I use Kies to restore the backup??
xdennismike said:
I gone through many links... and not able to clearly find what is the philz kernal.
http://forum.xda-developers.com/showthread.php?t=1901191
Where to download the kernal.. ??
Should I need to take backup and factory reset the phone before doing this activity. Later can I use Kies to restore the backup??
Click to expand...
Click to collapse
Same link 1st post and read on, once you flash the .zip file you will have root and you can use titanium backup to backup apps and you can also take nandroid backuo
Sent from my GT-N7000 using Tapatalk