Hello, mine is not a technical question (i know how to undervolt), I'd like to know what ICS kernel allows me to undervolt the cpu. Can't find one..
wanzer said:
Hello, mine is not a technical question (i know how to undervolt), I'd like to know what ICS kernel allows me to undervolt the cpu. Can't find one..
Click to expand...
Click to collapse
Tegrak app should allow that, it injects a module into any kernel (most are supported)
thank you, but it does not work with criskelo.. what kernel do you suggest?
Try voltage control.
Sent from my GT-N7000 using XDA
hing98 said:
Try voltage control.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
I have installed Voltage control and setcpu, no one works if kernel doesn't support undervolting.
Related
I just installed tegrak overlocking on my sgs fone. Pls help me what settings will i use. im running android 2.3.3. pls help
You need a kernel that supports overclocking. For values just look in the Glitch-kernel-thread. And I prefer 'Voltage Control'.
Sent from my GT-I9000 using XDA Premium App
hi. i saw the thread. WOW too techy for me. i dont know where to start and what to look for
Just look at the values.
Sent from my GT-I9000 using XDA Premium App
i dont know what is my rom? if cvm or maui? i mean cm
Go to Settings -> About phone then you'll see what's your ROM.
how will i know if im CM7 or maui as my fone doesnt say so
errrr if you're talking about the tegrak overclocking app, it does overclocking by itself without the need for a custom kernel or other app. that is its purpose *facepalm*
Try set OC to 1.2 GHz and see how that goes. if it makes the phone reboot/not work properly, click on "optimisation" and increase the voltage value for 1200 a little bit (ie. 25 or 50 mv). You can apply the same principles when attempting higher GHz too.
actually ive installed voltage control but it says my fone's kernel does not support voltage control. What kernel will i install so i can overclock my fone. Pls see below my firmware:
Firmware version: 2.3.3
Baseband version: I9000 XXJVO
Kernel Version: 2.6.35.7-i9000XWJVH-CL184813
Build Number: GINGERBREAD.XWJVO
@oswade i followed your instructions. my fone did not boot at 1.2 ghz. what does it mean?
by the way i read from other thread that stock kernel cant be overclocked that i need a custom kernel for overclocking? if this is true then installing tegrak overclock is useless except for custom kernel?
softpinkishlips said:
by the way i read from other thread that stock kernel cant be overclocked that i need a custom kernel for overclocking? if this is true then installing tegrak overclock is useless except for custom kernel?
Click to expand...
Click to collapse
Yes, you need a custom kernel.
And be sure to have the kernel cleaning script on your sdcard to, it can provide flashing if you have made sh*t.
Available here: http://forum.xda-developers.com/showthread.php?t=1053304
Thanks Lunchbox!! However i find it complicated and im scared to do it. i guess ill be needing a tutor for this.
Tank u very much!
softpinkishlips said:
Thanks Lunchbox!! However i find it complicated and im scared to do it. i guess ill be needing a tutor for this.
Click to expand...
Click to collapse
Why?
You lookbfor a kernel that fits your firmwareversion and that supports oc. You have to flash this kernel via Odin oder CWM (there are always installation instructions in each kernel-thread). Then you download 'Voltage Control' out of the market, set your CPU frequency and you are done.
Sent from hell to take your soul
Sent from my GT-I9000 using XDA Premium App
Ok lunchbox ill try.
Sent from my GT-I9000 using XDA Premium App
Hi
I have install setCpu on my touchpad (64G) with the latest nightly (cm-9-20121111-NIGHTLY-tenderloin)
It seems to work fine and stats tells that i am up to 1.5GHZ.
I have seen on the forum the GamerZ kernel tuned to OC the touchpad.
Question is simple, is there a benefit from installing this kernel or setCpu is enough, or both are meant to live together ?
Thanks
Well, there is the GPU OC, which really helps with fps if your TP can handle it...
Sent from my cm_tenderloin using xda premium
-SGA- said:
Well, there is the GPU OC, which really helps with fps if your TP can handle it...
Sent from my cm_tenderloin using xda premium
Click to expand...
Click to collapse
So if i install this kernel, there is no need for setcpu ?
ethome said:
So if i install this kernel, there is no need for setcpu ?
Click to expand...
Click to collapse
With the GamerZ kernel you'll be able to OC to 2.something ghz and the GPU will be overclocked
SetCPU is used to adjust the frequencies.
Voltage Control's option only allows for the changing of CPU governor and I/O scheduler. There's no voltage control for me to undervolt. Any other alternatives or is there a workaround?
On V28C Ice Cream Sandwich (flashed with SFT).
Magic.*snort* *snort*
But I guess its not possible on a stock Rom other than Zeus
Sent from my LG-P970 using xda app-developers app
chuayx1 said:
Voltage Control's option only allows for the changing of CPU governor and I/O scheduler. There's no voltage control for me to undervolt. Any other alternatives or is there a workaround?
On V28C Ice Cream Sandwich (flashed with SFT).
Click to expand...
Click to collapse
You also need a kernel, that supports uv... so no uv kernel, no uv wait for a few weeks and we ll have new kernel sources and then we ll get uv, ov, uc and oc
Sent from my LG-P970 using xda app-developers app
N00BY0815 said:
You also need a kernel, that supports uv... so no uv kernel, no uv wait for a few weeks and we ll have new kernel sources and then we ll get uv, ov, uc and oc
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
I see, i'm using the stock kernel hence there's no options for it. If I flash back to CM10 I believe the kernel will have the options of adjusting voltage opened up to Voltage control?
chuayx1 said:
I see, i'm using the stock kernel hence there's no options for it. If I flash back to CM10 I believe the kernel will have the options of adjusting voltage opened up to Voltage control?
Click to expand...
Click to collapse
Nope stock cm10 kernel also doesnt have support afaik. But there soon will be some i guess, as soon as we have p970 ics sources
Sent from my LG-P970 using xda app-developers app
N00BY0815 said:
Nope stock cm10 kernel also doesnt have support afaik. But there soon will be some i guess, as soon as we have p970 ics sources
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
I see. Which Jellybeans or ICS based custom roms's kernel have support for it?
chuayx1 said:
I see. Which Jellybeans or ICS based custom roms's kernel have support for it?
Click to expand...
Click to collapse
None.
sent from my Optimus Black V28c
Hey,
I am a New member.
I Search a OverClocking supported Kernel for the Samsung Galaxy S3 LTE GT-I9305.
Please help me.
Thank you
have a try in the S3 forum http://forum.xda-developers.com/forumdisplay.php?f=1563
http://forum.xda-developers.com/showthread.php?t=2167091 Yank555.lu kernel v3.3 ported for GT-I9305
Hello
Refreshing topic, I'm looking to overclock the GPU kernel for gt-i9305 android 4.1.2 stock rom samsung. I'm currently using kernel 3.4 and yank is good, but I would like to tweak the gpu more. Perseus kernel reboots my device non-stop.
Please help me.
Thread moved to I9305 Q&A.
ReaperEZG said:
Hello
Refreshing topic, I'm looking to overclock the GPU kernel for gt-i9305 android 4.1.2 stock rom samsung. I'm currently using kernel 3.4 and yank is good, but I would like to tweak the gpu more. Perseus kernel reboots my device non-stop.
Please help me.
Click to expand...
Click to collapse
boeffla?
chongc1996 said:
boeffla?
Click to expand...
Click to collapse
Unfortunately, for me is worse than yank the kernel, moreover, did not see in him the option to overclock the gpu, so eliminated. I wonder why I have bootloop Kernel Perseus*?
ReaperEZG said:
Unfortunately, for me is worse than yank the kernel, moreover, did not see in him the option to overclock the gpu, so eliminated. I wonder why I have bootloop Kernel Perseus*?
Click to expand...
Click to collapse
Download Boeffla-config v2 app from play store to adjust cpu/gpu
Sent from my GT-I9305 using xda app-developers app
chongc1996 said:
Download Boeffla-config v2 app from play store to adjust cpu/gpu
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
thanks man, with this application kernel works great. You do not know what value can the gpu can tweak in our i9305*?
Best one for me is agni kernel manage to undervolt my cpu to -100mV and gpu to -50mV and by me it has the best app to Oc (build in).
Hello guys.
I am about to use cm10.1. I would like to make my phone faster but overclock is rebooting my phone too often, also it gets hot really easily. Is there anything 'speed kernel compatible with cm10 / up ?
Sent from my GT-I9000 using xda premium
Zahovay said:
Hello guys.
I am about to use cm10.1. I would like to make my phone faster but overclock is rebooting my phone too often, also it gets hot really easily. Is there anything 'speed kernel compatible with cm10 / up ?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Semaphore kernel is compatible and fast
however, you have to play with the governors and scheduler to change speed without overclocking (also in stock kernel)
look your best configuration
Overclock
quack75 said:
Semaphore kernel is compatible and fast
however, you have to play with the governors and scheduler to change speed without overclocking (also in stock kernel)
look your best configuration
Click to expand...
Click to collapse
Could u give me a link about a thread that includes the kernel and the way how to set it up? I haven't done kernel change for ages..
And amm.. I don't mind overclocking but if I have to, I need one that does not reboot every 3rd minute...
Zahovay said:
Could u give me a link about a thread that includes the kernel and the way how to set it up? I haven't done kernel change for ages..
And amm.. I don't mind overclocking but if I have to, I need one that does not reboot every 3rd minute...
Click to expand...
Click to collapse
here it is
http://forum.xda-developers.com/showthread.php?t=1786220
and a tread for the app to manage the kernel ( is in a play store)
http://forum.xda-developers.com/showthread.php?t=1886686
quack75 said:
here it is
http://forum.xda-developers.com/showthread.php?t=1786220
and a tread for the app to manage the kernel ( is in a play store)
http://forum.xda-developers.com/showthread.php?t=1886686
Click to expand...
Click to collapse
I have to flash the kernel right after the flashed rom?
Zahovay said:
I have to flash the kernel right after the flashed rom?
Click to expand...
Click to collapse
yes