Related
Hi guys, my first post here but i has been following your roms and forum since a year or so
i bought a moto milestone from ebay free free operator and i brought it here to colombia my country, my operator is tigo 850/1900/2100 but i never been able to activate 1900 band.
is possible activate my baseband to 1900 and get 3g working?
i already tried openrecovery for change baseband to some country/operator with the baseband combo 850/1900/2100 but it never works
i have just right now miui lastest version, lastest openrecovery and i know how to root, how to unroot and the basic knowledge about install roms
any help is so much appreciated
BLacKR1D3R said:
Hi guys, my first post here but i has been following your roms and forum since a year or so
i bought a moto milestone from ebay free free operator and i brought it here to colombia my country, my operator is tigo 850/1900/2100 but i never been able to activate 1900 band.
is possible activate my baseband to 1900 and get 3g working?
i already tried openrecovery for change baseband to some country/operator with the baseband combo 850/1900/2100 but it never works
i have just right now miui lastest version, lastest openrecovery and i know how to root, how to unroot and the basic knowledge about install roms
any help is so much appreciated
Click to expand...
Click to collapse
Try setting up your 3G by changing the APN in Mobile Network Settings.
thx for your answer, i have the rigth settings in the APN, and i have edge data only.
UNLOCKED BOOTLOADER ONLY!!!
Well i wrote this post because many users are having problem upgrading the HD to Jelly Bean, there are simple steps to having a 100% working JB Phone!!!
1. download the JB firmware from Telstra Full from here http://sbf.droid-developers.org/van...A028.0R_LSAVNQJBTELSTRA_P010_A010_CFC.xml.zip or from Firmware thread!
THANKS TO FIRMWARE TEAM!
I like the Telstra one because Orange and SFR have many battery issues.
2. download the modem_signed file of your operator, U can find it on your Firmware file ICS, In this case were gonna use the Telcel Mexico one (is very important to use the correct one, because in each region LTE works in different freq.
Also u have to extract the fsg_signed file too.
Telcel Modem_Signed https://www.box.com/s/dp2aj3v8odeu65yqkr2x
Rogers Modem_Signed https://www.box.com/s/i2qnaauvc0pd3xmn23mg
AGAIN THANKS TO FIRMWARE TEAM!
3. download the .xml edited: https://www.box.com/s/ylydzzjs79ynmj1vbdm3 This file works for everyone, its just an edited file to run the rsd lite without GETVAR error.
4. with the Telstra firm downloaded double click on it and open with WinRar and Replace the .xml, the fsg_signed and modem_signed files.
5. and thats it! u have a fully functional SBF file to start flashing with RSD Lite.
Btw here u can find the latest drivers.... https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
any issue im here to support u!!!
Thanks for this! I really needed a tut, can't believe telcel hasn't released jb for our devices u.u
Sent from my XT925
Royalfox said:
Thanks for this! I really needed a tut, can't believe telcel hasn't released jb for our devices u.u
Sent from my XT925
Click to expand...
Click to collapse
The official JB release comes to telcel in lately January or February.
dashiell.cano said:
The official JB release comes to telcel in lately January or February.
Click to expand...
Click to collapse
Can't wait lol.
How do I flash with RSD Lite? And how can I keep root?
Sent from my XT925
dashiell.cano said:
UNLOCKED BOOTLOADER ONLY!!!
Well i wrote this post because many users are having problem upgrading the HD to Jelly Bean, there are simple steps to having a 100% working JB Phone!!!
1. download the JB firmware from Telstra Full from here http://sbf.droid-developers.org/van...A028.0R_LSAVNQJBTELSTRA_P010_A010_CFC.xml.zip or from Firmware thread!
I like the Telstra one cause Orange and SFR have many battery issues.
2. download the modem_signed file of your operator, U can find it on your Firmware file ICS, In this case were gonna use the Telcel Mexico one (is very important to use the correct one, because in each region LTE works in different freq.
Telcel Modem_Signed https://www.box.com/s/dp2aj3v8odeu65yqkr2x
3. download the .xml edited: https://www.box.com/s/ylydzzjs79ynmj1vbdm3 This file works for everyone, its just an edited file to run the rsd lite without GETVAR error.
4. with the Telstra firm downloaded double click on it and open with WinRar and Replace the .xml and modem_signed files.
5. and thats it! u have a fully functional SBF file to start flashing with RSD Lite.
any issue im here to support u!!!
Click to expand...
Click to collapse
Little question ... Telstra don't support LTE ?
I have installed the full Telstra without Rogers modem ... because i am not in lte zone for the moment ... i really prefer the telstra modem version ! More stable in HSPA and better signal/speed for me on The canadian Telus Carrier Than the Original Rogers modem on ics ! just no test in lte ...
Royalfox said:
Can't wait lol.
How do I flash with RSD Lite? And how can I keep root?
Sent from my XT925
Click to expand...
Click to collapse
download and install rsd lite Version 6.1.4 and the drivers from Motorola support website, conect ur phone, select the sbf file that u create in Filename and click on start! easy!!!
if u have problems add me in whatsapp +524423599702
cedqc418 said:
Little question ... Telstra don't support LTE ?
I have installed the full Telstra without Rogers modem ... because i am not in lte zone for the moment ... i really prefer the telstra modem version ! More stable in HSPA and better signal/speed for me on The canadian Telus Carrier Than the Original Rogers modem on ics ! just no test in lte ...
Click to expand...
Click to collapse
YES, Telstra support LTE but LTE have different freqs and sometimes one doesnt work in another country, ex. In Mexico And Canada we have the same freq, but in Brazil and US we cant have LTE working! the modem_signed from Telstra could work in ur country but maybe not, better u replace the file and u gonna have a fully working Firm!
Please Credits Firmware Team, thanks
Enviado desde mi XT925 usando Tapatalk 2
Pzyduck said:
Please Credits Firmware Team, thanks
Enviado desde mi XT925 usando Tapatalk 2
Click to expand...
Click to collapse
Yeah youre right! .... post edited!
*Sent from my Razr G*
on rogers tried with rogers modem. everything works except lte.
Sent from my XT925 using Tapatalk 2
Did u check the network config?
*Sent from my Razr G*
Just test on telus ( with the rogers phone full flashed to telstra firmware... no need to flash rogers radio ) LTE work great without any problem... in QC City area...
i will try in the next hours with a rogers lte micro sim card
dashiell.cano said:
Did u check the network config?
*Sent from my Razr G*
Click to expand...
Click to collapse
Sorry i meant i'm on Fido but with Rogers Modem, I checked network config. everything was correct but no LTE. was getting 3G speeds.
I also tried the Telstra Modem, no LTE but 3g works. Maybe others will have better luck then me.
Rogers LTE
Krizid said:
Sorry i meant i'm on Fido but with Rogers Modem, I checked network config. everything was correct but no LTE. was getting 3G speeds.
I also tried the Telstra Modem, no LTE but 3g works. Maybe others will have better luck then me.
Click to expand...
Click to collapse
Im having the same problems. Im using The Telstra Full with the rogerss modem and I cant get LTE, only HPDSA. Its quite fast, about 8mbps down but no LTE
I double checked all my APN settings from the Rogers website.
My Rogers XT925 phone work great in lte with telstra full flash with rogers and telus !
But a friend have a problem like you ...
Download http://forum.xda-developers.com/showthread.php?t=1943879
Telcel Mexico... get the radio files ... flash it ...
Now my friend have LTE
This is really werd
cedqc418 said:
My Rogers XT925 phone work great in lte with telstra full flash with rogers and telus !
But a friend have a problem like you ...
Download http://forum.xda-developers.com/showthread.php?t=1943879
Telcel Mexico... get the radio files ... flash it ...
Now my friend have LTE
This is really werd
Click to expand...
Click to collapse
So weird! Some friends are having the LTE issue and when they replace the modem signed with one totally different the LTE back to work! Dont know why!
*Sent from my Razr G*
Telstra with Mexico Modem..still no LTE
dashiell.cano said:
So weird! Some friends are having the LTE issue and when they replace the modem signed with one totally different the LTE back to work! Dont know why!
*Sent from my Razr G*
Click to expand...
Click to collapse
I tried using the Telstra full with the mexico modem. still no LTE on Rogers (BC) in the mobile settings, only 2g/3g/4g is offered, no LTE
ill try to put links to each modem from each region, and a easy way to flash it without lose anything, just waaaaait!
AdamMarkTodd said:
I tried using the Telstra full with the mexico modem. still no LTE on Rogers (BC) in the mobile settings, only 2g/3g/4g is offered, no LTE
Click to expand...
Click to collapse
Lol i have found you problem ... i thing ... 4G icon is LTE ... on telstra firwmware !!! there are no LTE icon !!!! 4G is LTE !
---------- Post added at 03:27 PM ---------- Previous post was at 03:22 PM ----------
http://techau.tv/blog/images/Motorola-and-Telstra-Announce_D5F4/IMG_0997.jpg
Check the phone at the left ... is connected to LTE ;p
dashiell.cano : Add this détails on the first post ;p !
Fixed it
cedqc418 said:
Lol i have found you problem ... i thing ... 4G icon is LTE ... on telstra firwmware !!! there are no LTE icon !!!! 4G is LTE !
---------- Post added at 03:27 PM ---------- Previous post was at 03:22 PM ----------
Check the phone at the left ... is connected to LTE ;p
dashiell.cano : Add this détails on the first post ;p !
Click to expand...
Click to collapse
Your half right! before I was getting only HSDPA+. I flashed the Rogers Modem signed AND fsg_signed. Then It all of a sudden started working on 4G (which I now know is actually LTE)
I had to enter MCC and the MNC to have 4G work. I found then on wiki
Hello Guys.
I flashed Tmobile 4.4.3 sbf in my XT1052 europe.
Every is fine but I had signal.
The only solution that I see is flash baseband of sbf eu.
With this I have signal. LMT, 3G, Edge.... Etc.... But I´ll like use the radio original of tmobile ever that possible.
My operator in Spain is Vodafone.
I saw other thread but is no solution for me because, the People was run a simcard of tmobile and I want run rom tmobile sbf in my XT1052 with Vodafone Spain and I can´t it.
Thanks in advance.
Nothing? :/
Enviado desde mi XT1053 mediante Tapatalk
You will probably have to flash a correct radio for your phone.
The TMO phone has LTE bands 2/4/17. Your phone has LTE bands 3/7/20.
mandrsn1 said:
You will probably have to flash a correct radio for your phone.
The TMO phone has LTE bands 2/4/17. Your phone has LTE bands 3/7/20.
Click to expand...
Click to collapse
And prior to that probably adjust build.prop and set the correct APN for your provider.
I don't want LTE because in my region haven't it.
I have radio of rom stock eu. And now I have signal.
I'll think that is possible run with radio of tmobile with 3g or 2g
I flashed patch of kryptonyte and nothing happen for my model.
Have a solution run tmbobile rom with baseband tmobile?
isaakmg said:
I don't want LTE because in my region haven't it.
I have radio of rom stock eu. And now I have signal.
I'll think that is possible run with radio of tmobile with 3g or 2g
I flashed patch of kryptonyte and nothing happen for my model.
Have a solution run tmbobile rom with baseband tmobile?
Click to expand...
Click to collapse
I don't quite understand your situation. Do you have signal but no data transmission or there is no mobile signal at all? In the first case set APN. In the second case something went terrible wrong during flashing. Dirty flash is possible reason what caused impact of two different systems. I assume that you have bootloader unlocked. Go back to stock and make a clean flash.
The answer is very simple. Tmobile stock rom 4.4.2 or 4.4.3 don't work radio with her baseband. Nothing of gsm, 2g or 3g. Nothing of data. WiFi yes.
The only solution is flash radio/baseband of rom eu or uk 4.4.2 for have signal and can make calles, data etc etc.....
I want work with the baseband of tmobile because I think that is better that work for other no original baseband like eu of uk....
Do you understand me now?
Sorry, my english is very poor.
isaakmg said:
The answer is very simple. Tmobile stock rom 4.4.2 or 4.4.3 don't work radio with her baseband. Nothing of gsm, 2g or 3g. Nothing of data. WiFi yes.
The only solution is flash radio/baseband of rom eu or uk 4.4.2 for have signal and can make calles, data etc etc.....
I want work with the baseband of tmobile because I think that is better that work for other no original baseband like eu of uk....
Do you understand me now?
Sorry, my english is very poor.
Click to expand...
Click to collapse
What are you trying to tell me is that US Tmobile Moto x can only work in the USA, what is not exactly true. Partially is correct for LTE but not for gsm or 3g. Tmobile's Moto x supports almost the same gsm or 3g frequencies as any European phone.
piskr said:
What are you trying to tell me is that US Tmobile Moto x can only work in the USA, what is not exactly true. Partially is correct for LTE but not for gsm or 3g. Tmobile's Moto x supports almost the same gsm or 3g frequencies as any European phone.
Click to expand...
Click to collapse
Why don't ran radio tmobile in 2g por 3g for calls and data?
isaakmg said:
Why don't ran radio tmobile in 2g por 3g for calls and data?
Click to expand...
Click to collapse
As I said dirty flash is possible reason. Try to get back original entire system (if you're unlocked) and this time totally follow the instructions.
I have unlocker version.
Flash total clean with adb....
Nothing of signal.....
Enviado desde mi XT1053 mediante Tapatalk
He says that he flashed XT1053 4.4.3 to EU version XT1052 and had no cell signal.
This is normal. You won't get signal on XT1052 when running on XT1053 modem firmware.
I did the same thing some time ago but the other way. I flashed XT1052 firmware to my XT1053 to get more EU languages. But I had to flash XT1053 modern files to get it working.
Why are you insisting on running XT1053 modem firmware on XT1052?
Sent from my XT1053 using Tapatalk
ujoty said:
He says that he flashed XT1053 4.4.3 to EU version XT1052 and had no cell signal.
This is normal. You won't get signal on XT1052 when running on XT1053 modem firmware.
I did the same thing some time ago but the other way. I flashed XT1052 firmware to my XT1053 to get more EU languages. But I had to flash XT1053 modern files to get it working.
Why are you insisting on running XT1053 modem firmware on XT1052?
Sent from my XT1053 using Tapatalk
Click to expand...
Click to collapse
Because in general the works most fine....
Hello Friends!!
I have a big problem with my device.
It's a Sony Xperia T( LT30p). The problem is that it does not have support for the band 900 UMTS. And I have problems of coverage in many zones where this band is for that my operator operates in H+.
My device works on GSM850, GSM900, GSM1800, GSM1900, UMTS_BC1, UMTS_BC2, UMTS_BC4, UMTS_BC5, LTE_BC2, LTE_BC4, LTE_BC5 and LTE_BC17.
I need to have UMTS_BC8.
I do not understand how this device may have LTE support when is not a 4G device; and not works on UMTS_BC8 when Sony indicates that it works in the band 900 UMTS.
My firmware is the stock unbranded for Spain, 4.1.2.
My question is if I can solve this problem if i will flashing a correct euro baseband with flashtools. The problem is that I do not find any baseband in file .ftf for Xperia T; thing that if that there is in XDA is the whole compilation for the Xperia Arc S.
I would be very grateful to you if you will helping me to solve this problem.
Another point is that in the menu of selection of band only me there appears USA Band, when there should appear EURO Band.
A Greeting!!!
This is weird
In fact in my phone I have UMTS_BC8 and there are no LTE bands.
Your customization number 1268-8488 seems right (generic Spain), I can't believe your device is working with a wrong baseband which is the one for LT30a or LT30at.
So, just try to flash a complete new firmware with Flashtool.
Go here: http://forum.xda-developers.com/showthread.php?t=2648320
Pick an unbranded one for LT30p from any country and... anyway there's also your 1268-8488 (Unbranded Spain) to choose if you like
istux said:
This is weird
In fact in my phone I have UMTS_BC8 and there are no LTE bands.
Your customization number 1268-8488 seems right (generic Spain), I can't believe your device is working with a wrong baseband which is the one for LT30a or LT30at.
So, just try to flash a complete new firmware with Flashtool.
Go here: http://forum.xda-developers.com/showthread.php?t=2648320
Pick an unbranded one for LT30p from any country and... anyway there's also your 1268-8488 (Unbranded Spain) to choose if you like
Click to expand...
Click to collapse
I thought that, that flashing new firmware the baseband be changed, but no.
I can change firmware but not the baseband.
I was flashed all tips of versions of Android, 4.0, 4.1, 4.3 (all stock) unbranded Spanish, Italian, European, Vodafone, Yoigo.
Even install it a zip archive Baseband by Recovery of Hybrid based stock, without any effect, I have been unable to modify the baseband of the device.
I bought it on Amazon. I imagine it would unlock bad seller
I think it would be either a software solution to fix the phone after a bad unlock or flash a euro baseband on .ftf with flashtools.
Xlp22 said:
I thought that, that flashing new firmware the baseband be changed, but no.
I can change firmware but not the baseband.
I was flashed all tips of versions of Android, 4.0, 4.1, 4.3 (all stock) unbranded Spanish, Italian, European, Vodafone, Yoigo.
Even install it a zip archive Baseband by Recovery of Hybrid based stock, without any effect, I have been unable to modify the baseband of the device.
I bought it on Amazon. I imagine it would unlock bad seller
I think it would be either a software solution to fix the phone after a bad unlock or flash a euro baseband on .ftf with flashtools.
Click to expand...
Click to collapse
I'm thinking that you might actually have an LT30a/LT30at, which does not have the BC8 band and does have LTE support, and either you or the seller flashed the wrong FTF. I don't know if this is actually possible, but if it is the case, you should check under the battery if there is a label that actually shows which model you really have. It's the only thing that makes sense to me, because you're describing an LT30a/LT30at.
Antiga Prime said:
I'm thinking that you might actually have an LT30a/LT30at, which does not have the BC8 band and does have LTE support, and either you or the seller flashed the wrong FTF. I don't know if this is actually possible, but if it is the case, you should check under the battery if there is a label that actually shows which model you really have. It's the only thing that makes sense to me, because you're describing an LT30a/LT30at.
Click to expand...
Click to collapse
mmmm
Its possible.
Maybe they gave me pig in a poke
Or in this case, LT30AT instead of LT30P .
I have no time to open the device and look under the battery, but the sticker off the side.
The model is 12w39, if detachment, put another sticker under PM-0140-BV.
So I conclude that it is very possible that they sold Sony Xperia T LT30at (Sony Mint Amy).
Perfect, I can not use the 900 band HSPA + (BC 8) and nor LTE because in Spain is on the 1800 and 2600 BC 3 and BC 7.
WHILE 2100 can continue to use the UMTS settle me.
Curious that LT30p firmware is going great, really does not give me no type of error.
I will not be forced to claim, as I feel cheated, the box, the firmware and everything was the LT30p.
What a scam.
Thank you very much!.
Antiga Prime said:
I'm thinking that you might actually have an LT30a/LT30at, which does not have the BC8 band and does have LTE support, and either you or the seller flashed the wrong FTF. I don't know if this is actually possible, but if it is the case, you should check under the battery if there is a label that actually shows which model you really have. It's the only thing that makes sense to me, because you're describing an LT30a/LT30at.
Click to expand...
Click to collapse
I thought the same thing, but it's so strange. I mean, why it beahaves that way also with LT30p baseband which doesn't include LTE support?
Xlp22 said:
mmmm
Its possible.
Maybe they gave me pig in a poke
Or in this case, LT30AT instead of LT30P .
I have no time to open the device and look under the battery, but the sticker off the side.
The model is 12w39, if detachment, put another sticker under PM-0140-BV.
So I conclude that it is very possible that they sold Sony Xperia T LT30at (Sony Mint Amy).
Perfect, I can not use the 900 band HSPA + (BC 8) and nor LTE because in Spain is on the 1800 and 2600 BC 3 and BC 7.
WHILE 2100 can continue to use the UMTS settle me.
Curious that LT30p firmware is going great, really does not give me no type of error.
I will not be forced to claim, as I feel cheated, the box, the firmware and everything was the LT30p.
What a scam.
Thank you very much!.
Click to expand...
Click to collapse
12w39 is about when the device was made. It says: Year 2012 Week 39 (=september/october 2012)
Pull the same label inside the sim/sd-card door and tell me what's the SI number (abcd-efgh)
Look also at the side behind, it should say LT30p.
I think you can use your warranty anyways.
13w25
AAA
SI
1265-9981
Xlp22 said:
13w25
AAA
SI
1265-9981
Click to expand...
Click to collapse
Made in April 2013, model LT30p, country: United Kingdom, Brand: Orange
Your phone seems to have been assembled with many parts from different phones.
If I were you, I would ask the seller an explanation
Where I can find these values?
Xlp22 said:
13w25
AAA
SI
1265-9981
Click to expand...
Click to collapse
DS-1 said:
Where I can find these values?
Click to expand...
Click to collapse
http://sony.yt/topic/4622-spis-customizacji-firmware-dla-xperia-t-lt30p-list-of-firmware-customization-for-xperia-t-lt30p-%D1%81%D0%BF%D0%B8%D1%81%D0%BE%D0%BA-%D0%BAa%D1%81%D1%82%D0%BE%D0%BC%D0%B8%D0%B7%D0%B0%D1%86%D0%B8%D0%B8-%D0%B4%D0%BB%D1%8F-xperia-t-lt30p/
I was talking about the values of my phone (date of production, ecc.).
istux said:
http://sony.yt/topic/4622-spis-customizacji-firmware-dla-xperia-t-lt30p-list-of-firmware-customization-for-xperia-t-lt30p-%D1%81%D0%BF%D0%B8%D1%81%D0%BE%D0%BA-%D0%BAa%D1%81%D1%82%D0%BE%D0%BC%D0%B8%D0%B7%D0%B0%D1%86%D0%B8%D0%B8-%D0%B4%D0%BB%D1%8F-xperia-t-lt30p/
Click to expand...
Click to collapse
DS-1 said:
I was talking about the values of my phone (date of production, ecc.).
Click to expand...
Click to collapse
13w25
13 = year = 2013
w25 = week 25 of the year = June (more or less)
Ok, I understood this.
I'd like to know where I can find those values on my phone!
istux said:
13w25
13 = year = 2013
w25 = week 25 of the year = June (more or less)
Click to expand...
Click to collapse
DS-1 said:
Ok, I understood this.
I'd like to know where I can find those values on my phone!
Click to expand...
Click to collapse
Pull the white label you can find behind the door on the rear cover, just above sim & sd cards.
Hello,
my moto voice stopped working and even a factory reset didnt help. So I unlocked my bootloader and everything from the Rom I downloaded. I got an error upon flashing the modem, but the script sadly still deleted modemst1 and 2. Everythng works now, except the phone is now Brasilian and I have no signal whatsoever. My Moto is a XT1092 if it helps. Help would be much appreciated
Indeed yo may killed to modem/radio, probably your carrie does not support the same bands as the retail brazil carrier. Which carrier are you?, all gsm bands still may work unless you have CDMA.
Regards
beelzebu said:
Indeed yo may killed to modem/radio, probably your carrie does not support the same bands as the retail brazil carrier. Which carrier are you?, all gsm bands still may work unless you have CDMA.
Regards
Click to expand...
Click to collapse
Im currently using o2 germany. Just got off the phone with the Repair company and they said if i have root or unlocked bootloader its fubar and they wont repair it. WTF....i found brazil or us stock firmwares, but no german one...
I doubt it is broken. But it may not work until you find a stock original ROM to flash. Maybe you should look for a UK or FR ROM , I believe there is only one ROM for xt1092, not a specific German one. It might be called EU ROM, but I haven't searched for it.
Judge584 said:
I doubt it is broken. But it may not work until you find a stock original ROM to flash. Maybe you should look for a UK or FR ROM , I believe there is only one ROM for xt1092, not a specific German one. It might be called EU ROM, but I haven't searched for it.
Click to expand...
Click to collapse
The Build that was running on it before definitely ended in DE. But I will keep searching for it. Do you think I should send it to a repari center and risk paying a lot of money, or should I just wait until a German Rom is released somewhere? I mean, Android L at least should fix it right up again.
Because you are not stock you won't be able to update it to lollipop... For the repair center you are the only one to be able to answer that question
Judge584 said:
Because you are not stock you won't be able to update it to lollipop... For the repair center you are the only one to be able to answer that question
Click to expand...
Click to collapse
I am stock, I actually managed to get my TWRP Backup back on the phone, so im on a German Rom again. Still, the modem doesnt work, as TWRP doest back that up.
I see... You have to find a stock radio and to flash it again.
I think someone with unlocked bootloader can probably extract it for you?
Judge584 said:
I see... You have to find a stock radio and to flash it again.
I think someone with unlocked bootloader can probably extract it for you?
Click to expand...
Click to collapse
Yes exactly. I do not know how someone can extract the radio though...
I hope, Android L will flash a new modem. If that would be the case, my problem would be solved
Yes but again: if your modem not stock then no android L for you.
Judge584 said:
Yes but again: if your modem not stock then no android L for you.
Click to expand...
Click to collapse
I know that, but I guess there will be someone who can grab the OTA and i can flash it manually
Good guess you're right. But I suggest you to ask someone with a xt1092 and an unlocked bootloader to extract radio for you, ask it in the dev section.
This thread you should follow : http://forum.xda-developers.com/showthread.php?p=56392284
Judge584 said:
This thread you should follow : http://forum.xda-developers.com/showthread.php?p=56392284
Click to expand...
Click to collapse
Tanks! I just found out, that i have no IMEI and my EFS Partition is probably screwed. Do you know of any way to restore that to stock?
Efs partition ? Unfortunately not
---------- Post added at 11:16 AM ---------- Previous post was at 10:38 AM ----------
This thread might help you : http://forum.xda-developers.com/showthread.php?t=1308546
Radixtrator said:
Im currently using o2 germany. Just got off the phone with the Repair company and they said if i have root or unlocked bootloader its fubar and they wont repair it. WTF....i found brazil or us stock firmwares, but no german one...
Click to expand...
Click to collapse
Goodnight[emoji14]
beelzebu said:
Indeed yo may killed to modem/radio, probably your carrie does not support the same bands as the retail brazil carrier. Which carrier are you?, all gsm bands still may work unless you have CDMA.
Regards
Click to expand...
Click to collapse
have you been able to resolve this? I basically did the same thing and removed my modemst1 and modemst2 as well..
Can you send me link for US stock firmware please
Radixtrator said:
Im currently using o2 germany. Just got off the phone with the Repair company and they said if i have root or unlocked bootloader its fubar and they wont repair it. WTF....i found brazil or us stock firmwares, but no german one...
Click to expand...
Click to collapse
Hey man ive been looking around for the US stock firmward, could you please let me know where you saw it?
Thanks
veekta said:
have you been able to resolve this? I basically did the same thing and removed my modemst1 and modemst2 as well..
Click to expand...
Click to collapse
Had to RMA the phone..