[Q] No bootloader, only connect to PC Icon - please help - HD7 Q&A, Help & Troubleshooting

Hi,
I have got a problem with my HD7 device.
After unsuccesful flashing it went to the state:
1) After it starts it goes straight into the "Connect to PC" mode
Photo:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2)
It is unable to go into booloader mode (Power + vol down) because it ignores it - it goes straight to 1)
3) If I connect it to zune it detects it but momentally it returns error
I don't have an idea what to do next, I have working Y-cable and sd-card with 1gb card which I already used few months ago.

adminmodeenabled said:
Hi,
I have got a problem with my HD7 device.
After unsuccesful flashing it went to the state:
1) After it starts it goes straight into the "Connect to PC" mode
Photo:
2)
It is unable to go into booloader mode (Power + vol down) because it ignores it - it goes straight to 1)
3) If I connect it to zune it detects it but momentally it returns error
I don't have an idea what to do next, I have working Y-cable and sd-card with 1gb card which I already used few months ago.
Click to expand...
Click to collapse
did u try entering the USB host mode? If you can enter the USB host mode try flashing again using the gold card method....
And when u said unsuccessful flashing were u updating through Zune?

sirajgoku said:
did u try entering the USB host mode? If you can enter the USB host mode try flashing again using the gold card method....
And when u said unsuccessful flashing were u updating through Zune?
Click to expand...
Click to collapse
No - it is not because updating through Zune, I tried to upload new Rom - previously I had WP7.5 with 2 month old rom
I tried to reflash using 2 roms with gold card method, both times it completed "UPDATE SUCCESS" but it doesnt' boot up - still the same screen.
Update process looked like that
1) First rom
RADIO - OK
BOOTLOADER - OK
OS - OK
RCUST - OK
TOUCH - OK
TOUCH - OK
TOUCH - OK
TOUCH - OK
TOUCH - OK
2) Second rom
RADIO - OK
BOOTLOADER - OK
OS - OK
RCUST - OK
3) ZUNE ERROR: C101002E - RESTORE ERROR
4) RUU_Schubert_HTC_Europe_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_Signed_SCHUBERT_RELEASE.exe
ERROR[260] CONNECTION - THe Update Utility can't connect your phone
Additional info - I have got SPL 1.54

Advanced setting problem
Hi Dear members,
I used advanced setting, after some setting some of my phone (htc-hd7) do not work such as Nokia drive, Nokia map, touchxplorer. When I touch them to use, the icon only tremble. This icon are tottering and don't work.
I tried to reinstall again but the ds market also does not work. I upgrade ds market and install devstor but this app also does not work.
Please help me what can I do ?
My direct email is [email protected]

m_r_anari said:
Hi Dear members,
I used advanced setting, after some setting some of my phone (htc-hd7) do not work such as Nokia drive, Nokia map, touchxplorer. When I touch them to use, the icon only tremble. This icon are tottering and don't work.
I tried to reinstall again but the ds market also does not work. I upgrade ds market and install devstor but this app also does not work.
Please help me what can I do ?
My direct email is [email protected]
Click to expand...
Click to collapse
Please open a separate thread for your question as it has no relevancy to the OP.

Did u try reflashing using the Y cable?

sirajgoku said:
Did u try reflashing using the Y cable?
Click to expand...
Click to collapse
Yes, I did it 3 times. Here are logs from screen
1) First rom
RADIO - OK
BOOTLOADER - OK
OS - OK
RCUST - OK
TOUCH - OK
TOUCH - OK
TOUCH - OK
TOUCH - OK
TOUCH - OK
2) Second rom
RADIO - OK
BOOTLOADER - OK
OS - OK
RCUST - OK
3) Rom extracted from %TEMP% by running RUU_Schubert_HTC_Europe_1.69.401.01_Radio_5.54.09. 21_22.33b.50.10_Signed_SCHUBERT_RELEASE.exe
RADIO - OK
BOOTLOADER - OK
OS - OK
RCUST - OK

did you try using another CardReader or FlashDrive?

KatoGuro said:
did you try using another CardReader or FlashDrive?
Click to expand...
Click to collapse
Cardreader - it detects it, detects rom on it, and loads everything from it with
"OK, OK, OK"
and then it writes that update is successful

sirajgoku said:
did u try entering the USB host mode? If you can enter the USB host mode try flashing again using the gold card method....
Click to expand...
Click to collapse
Press power for about 10 sec, then try to get in USB host mode for reflash

KatoGuro said:
Press power for about 10 sec, then try to get in USB host mode for reflash
Click to expand...
Click to collapse
But what for? Because if I press power it immediately starts to show HTC logo.
Maybe I should do it in different situation?

when you get stuck into the "Connect to PC" mode, press PowerButton for 10 sec for Restart, then hold Power+Camera+VolumeDown until the USB Host Mode appears!

KatoGuro said:
when you get stuck into the "Connect to PC" mode, press PowerButton for 10 sec for Restart, then hold Power+Camera+VolumeDown until the USB Host Mode appears!
Click to expand...
Click to collapse
I know how to enter USB HOST MODE - I reflashed the rom few times using goldcard (logs are in previous posts).
No I am trying your way - not after taking of battery, but after exiting from "Connect to PC" using power button.
SHUIMG.nhb -OK
RADIO - OK
BOOTLOADER - OK
OS - RCUST - OK
TOUCH - OK
TOUCH - OK
TOUCH - OK
TOUCH - OK
TOUCH - OK
Update Complete
UPDATE SUCCESS
Same - booting to "Connect to PC Mode"

but how...
how you managed to flash in just seconds??? should take about 30 min

KatoGuro said:
but how...
how you managed to flash in just seconds??? should take about 30 min
Click to expand...
Click to collapse
I thought about what you wrote and that was the only logical explanation - so after your answer I already guessed what did you mean.
Generally yeah...it took something about 15 minutes (not sure if it was 30).
But there is one problem - When i push the power button during the "Connect to pc screen" it reboot itselfs after 3-4 seconds and then is starting again so I have to press Camera + vol down button to enter USB Host mode (I am still holding the power button).
Maybe you meant something else?
I have time - I can try multiple things

adminmodeenabled said:
I thought about what you wrote and that was the only logical explanation - so after your answer I already guessed what did you mean.
Generally yeah...it took something about 15 minutes (not sure if it was 30).
But there is one problem - When i push the power button during the "Connect to pc screen" it reboot itselfs after 3-4 seconds and then is starting again so I have to press Camera + vol down button to enter USB Host mode (I am still holding the power button).
Maybe you meant something else?
I have time - I can try multiple things
Click to expand...
Click to collapse
I can even record what I do and upload video

Related

Rom upgrade failed

Hello,
my htc p3600 has failed during rom update. Now it does not even start.
I see only black screen and only the green light is on.
It is definitely dead or not?
please help.
thank you
P3600 fail during rom upgrade
I have the same problem. I found that my USB cable has bad connection and during upgrade it lost the signal. Now I cannot connect to Active sync or recover is there any solution?
i upgraded and everything was successful till after the reboot.
my phone now hangs on the HTC startup page.
any help?
if your htc hangs like mine(blakc screen and nothing else) you have to load the boot loader.
To load the boot laoder press power+camera+softreset. You will see on the screen some colors. Then plug your usb cable and refalsh.
ps:soft reset is the button over the call button
now i have another problem. The firmware procedure begins but it stops at 1% saying the rom is corrupted!
what does this mean?
i have tried with different roms but same error!!!!
nope..mine does not have a black screen.
after custom rom flashing, it reboots as per normal and enters loading screen
it just hangs at the initial loading screen without entering today screen
i have soft and hard reset and reflashed countless times with the same effect
i have SOLVED!!!!
here are the steps!
1.first of all if you are on vista you have to install the driver for the usb and not the one installed by default with "mobile device center".
You can find it here 32 bit the version of vista http://forum.xda-developers.com/attachment.php?attachmentid=33662&d=1169888879
Here 64 bit version for windows vista http://forum.xda-developers.com/attachment.php?attachmentid=33892&d=1170385335
2.Reboot windows vista in order to make sure the driver is loaded!
3.Next, you have to format the htc at low level with this procedure
http://www.htcblog.com/2008/02/23/e...-rom-corrotte-sul-pocketpc-htc-p3600-trinity/.
Basically, you have to
a)load the boot loader(power +camera+soft reset button - soft reset is the button over the green one),
b)connect the usb cable,
c) launch mtty(you can find it here http://rapidshare.com/files/89966008/mtty.exe)
d)connect on usb port.
e)Type enter and you will see "CMD>". then type
task 32 "and then press ENTER the keyboard"
task 28 "and then press ENTER the keyboard"
task 2A "and then press ENTER the keyboard"
info 8 "and then press ENTER the keyboard"
task 8 "and then press ENTER the keyboard"
f)Do a hard reset, look here http://www.hardreset.eu/htc_trinity_(p3600)_hard_reset_soft_reset_en.html/showthread.php?t=315
4.Remove battery
5.Insert battery
6.Again bring on the boot loader, and install original rom. I have used the one here in italian
http://rapidshare.com/files/65452211/trinity_tutto_originale__.rar.html
now my htc is working...
next i'm going to flash it with cooked room...
thanks man will try it and update
again really appreciate for the advice
does anyone happen to have the original rom in english?
well you could use the italian one only to see if works and then load the rom you desire...
just a question. when you connect your trinity, did it show up on the pc? or was there just the sound?
cos in bootloader , all i got was the sound but i know its connected
when it was like i described here in my first post i dont even listen the sound of a connected usb. It behaviour was like dead!
thats wierd , so how does mtty pick up the connection to the device?
anyway mine has the sound and i know its connected so ill try the method in the morning.
again thanks so much !
because i have been able to bring on the boot loader
which is this one
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
albgen said:
because i have been able to bring on the boot loader
which is this one
Click to expand...
Click to collapse
Is that a trinity?
AFAIK, the latest IPL is 1.00, and SPL 1.07
You will need to flash a correct IPL+SPL+OS at least, flash an original rom and when you get it working try whith a cooked one.
mac_es said:
Is that a trinity?
AFAIK, the latest IPL is 1.00, and SPL 1.07
You will need to flash a correct IPL+SPL+OS at least, flash an original rom and when you get it working try whith a cooked one.
Click to expand...
Click to collapse
dont know what it is!!!
the image is a sample found on internet!!! Only the colors are the same with my trinity!!!
lol i guess thats a sample of what bootloader looks like.
my bootloader reads
TRIN100
1PL-1.00
TRIN100 MFG
SPL-1.30. Olipro
Which one do i need to select to install the driver?
after i do the low level format , do i have to install Hard SPL + Radio before installing original rom?
bigrockshow said:
lol i guess thats a sample of what bootloader looks like.
Click to expand...
Click to collapse
After a failure it is quite important to see which bootloader you have
my bootloader reads
TRIN100
1PL-1.00
TRIN100 MFG
SPL-1.30. Olipro
Click to expand...
Click to collapse
Ok, you have a HardSPL already
Which one do i need to select to install the driver?
Click to expand...
Click to collapse
You should install Windows Mobile Center first, and after that it should find the drivers alone.
after i do the low level format , do i have to install Hard SPL + Radio before installing original rom?
Click to expand...
Click to collapse
The hard spl is not erased if you don't force it, so not
i have installed windows mobile media center.how do i get it to find the drivers?
i downloaded the set of drivers from albgen for vista 32bit
bigrockshow said:
i have installed windows mobile media center.how do i get it to find the drivers?
i downloaded the set of drivers from albgen for vista 32bit
Click to expand...
Click to collapse
It should find the drivers alone. Plugin in boot loader and it should install the device, after that use the update program 3.14.4.1 (Compatible whith vista)
Sorry for confusion but i've solved the driver thingy..

[Guide] How to update/change the ROM

Modified from my instructions posted in the wiki.
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Omnia_7#Updating.2FChanging_the_ROM
Updating/Changing the ROM
Before continuing with any of the following processes, you should note that (at present) there is no way to back up your user data. Things such as your contacts and emails can be re-downloaded from your phone since they are stored on remote servers. Multimedia items which have been synced with Zune to your PC can also manually be transferred back to your phone. However, things such as personalisation settings, SMS and MMS are lost. Programs can, of course, be re-downloaded from the Marktetplace - but this, again, is a manual process.
This process may also help your recover a "bricked"device - or rather one which does not successfully boot up into Windows Phone fully.
Hard Reset / Full Format
You may wish to hard reset the phone if you are experiencing software errors which are not fixed after a soft reset (pulling the battery out) or if you wish to clear the phone (i.e. you've just bought the phone second hand or are selling the phone).
To hard Reset your Omnia 7 without booting into Windows Phone 7, you have to:
Turn off the phone.
Turn on the phone, holding the Power + Volume DOWN + Camera buttons
Hit home button (Start) twice to begin.
Update/Change the ROM
Disclaimer:You should note that this process may void your warranty! Neither I nor xda will be held responsible for any damage caused, or refusal of warranty, by following this guide.
Before you can update your ROM you'll need to see if you can access the phone's Download Mode.
Accessing Download Mode
To update your ROM software, you will need to be able to access the phone's download mode.
Turn off the phone
Turn on the phone, holding down the Power + Volume UP + Camera buttons simultaneously.
When the phone turns on, release the power button.
A yellow triangle with an exclamation mark and a "download mode” message should appear.
If you are successful in this then you can continue with the flash. If you are unable to access download mode, then your phone has a faulty(?) bootloader. Follow the instructions in this forum post.
Download your ROM and flash tools
To flash the new ROM you will need:
Your new ROM.
There are currently three ROMs available though the only difference is their locale (which you can change later in the settings). The 8700XXJK1 ## 2010 November CSC_Cetus_Europe_I8700XENJK1 can be found here. The ROM package is compressed in .rar format, the password is samfirmware.com
Edit: A nice sticky thread now exists with loads of ROMs available here
Samsung Mobile USB Drivers v5.2
Can be found here
Samsung WP7 Flash Program
Can be found here
Now we're ready to flash!
Turn off your phone and disconnect it from the PC
Unrar the downloaded ROM package and install the Samsung USB drivers
Boot the phone into download mode (or insert your jig)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now connect the phone to your PC. Windows should recognise your device and install the drivers (it may check Windows Update first, you can either skip this or just let it be).
Open the WP7 flash program. If you are prompted with an md5 error, don't worry! You should see now an Active COM port (green) in the program.
Drag and drop the ROM files (all four) into the program, a small box will pop up and check the files. It will disappear.
Click start and the flash process begins!
DO NOT interrupt this process. Keep the phone and PC connected throughout. After 10-15mins the phone will reboot and you'll have your fresh new ROM.
Some things to note:
Between steps 7 and 8 everything should go automatically.
After the phone reboots for the fist time, a screen with a phone and a computer with an arrow and a red cross over the arrow will appear - this is OK!
There may be some delay between the phone asking for its new configuration settings and the flash program saying the flash is complete (a progress bar states it is still "Rebuilding"). It may be wise to just allow that progress bar to complete before inserting the new settings.
Depending upon what ROM you flash, you will find that your language and locale are probably not correct. You will need to change these in "Settings" for things such as Marketplace to work correctly.
If the Flash program does not recognise your device, try a different USB port. If that still doesn't work, try starting the program first and then plug in your phone.
Credits: Heathcliff74 and Erwan for the images.
Casey
Very good and very detailed... super job dude!
One quick question if i may... the screenshots show Vista OS i believe? Any idea if this will work on XP at all?
Thanks in advance
Yep, I think it works on Windows 2000 SP4, XP SP3, Vista and 7 - though I've only tested it on Win 7.
Let us know, if it doesn't!
Casey
i cant seem to extract the file. its failing
The updater app didn't seem to recognise the phone at first try, y had to reconnect it several times until everything went fine
Thanks, updated!
mikkybukky82 said:
i cant seem to extract the file. its failing
Click to expand...
Click to collapse
Did you enter the password? Somewhere in your rar extractor you'll have to put the password: samfirmware.com
Hope that helps,
Casey
Update successful ^^
Thanks for the guide !
Omnia 7 French locked to ORANGE
Flashing the ROM always seemed quite complicated to me. But after going thorugh the guide and flashing my phone successfully I have to say it actually quite easy.
Thanks for the guide.
Flashing is quick and easy with this guide, very n00b friendly.
I have a problem :S ...
i want to update my Omnia 7 and i get this...
I don't know why ... it was green...com 3
EDIT: I guess that i must connect USB cable to back of my PC ... in front USB just disconnecting device.
gogibyte said:
I have a problem :S ...
i want to update my Omnia 7 and i get this...
I don't know why ... it was green...com 3
[B]EDIT: [/B] I guess that i must connect USB cable to back of my PC :) ... in front USB just disconnecting device.[/QUOTE]
Yeah that's strange but I used to have the same problem when flashing ROMs to my HTC HD2, some of the USB ports worked and some didn't.
Glad you managed to fix it though!
Casey
Click to expand...
Click to collapse
Is this fw 7.0.7008?
premikkoci said:
Is this fw 7.0.7008?
Click to expand...
Click to collapse
No, but you should find that as soon as you flash this you'll get the notification to update.
Casey
I have a problem. My HP pavilion 6 doesn´t found my omnia 7 in download mode.
premikkoci said:
I have a problem. My HP pavilion 6 doesn´t found my omnia 7 in download mode.
Click to expand...
Click to collapse
You've installed the drivers, right?
If so, try using a different USB port.
Casey
premikkoci said:
I have a problem. My HP pavilion 6 doesn´t found my omnia 7 in download mode.
Click to expand...
Click to collapse
had the same issue...
- first i had to use jig for downloadmode (with the 3 button "trick" i got only the restore thing)
- i plugged the phone to computer...nothing happens (driver was installed before and i have rebooted)
- i unplugged the phone and used another usb port
-> driver where installed, i thought all is fine
- i started "WP7 flash program" but the program didnt see the phone, i checked device manager and all looked fine
- i unplugged the phone and plugged it in at the usb port i used first (when the phone was in restore mode)
- wp7 flash program found my phone
- flashed and all was fine
btw had a t-mobile (de) branded one and didnt get the 7008 update...now i have it in no time
€dith
i think marketplace and zune (on the phone) are now much more stable#
@dith 2:
marketplace ist much much much more stable compared to my original image and i had bad lags, now...no lags.
I dont know if the 7008 update makes this all or just the new firmware
EDIT. It works!
Is it possible to reverse this incase you need to return your phone for repair etc ?
Forzahibs said:
Is it possible to reverse this incase you need to return your phone for repair etc ?
Click to expand...
Click to collapse
If you can find your original ROM, then yes.
Casey
Download Mode
When I try to put my Omnia 7 into download mode using the 3 buttons I get a screen showing a phone to the left with a zig zag arrow to a laptop on the right. Is this an alternative download mode screen or is it the "bad" downloader??

[Q] Xperia Z cannot get in FLASH MODE

I try to update my Xperia Z but while need press volume up button and plug in cable, nothing happen~~~
keroro84 said:
I try to update my Xperia Z but while need press volume up button and plug in cable, nothing happen~~~
Click to expand...
Click to collapse
I think you have to press the volume down button and then plug it in.
hope i helped.
Mufrad said:
I think you have to press the volume down button and then plug it in.
hope i helped.
Click to expand...
Click to collapse
Same, I try Press Volume Up or Volume Down, also same, nothing happen.:crying:
keroro84 said:
Same, I try Press Volume Up or Volume Down, also same, nothing happen.:crying:
Click to expand...
Click to collapse
I only get an unknown USB device and i don't seem to have any correct driver.
unable to access flashmode
nurps said:
I only get an unknown USB device and i don't seem to have any correct driver.
Click to expand...
Click to collapse
i can confirm that, got the same issue - i installed at least cwm for cm10.1, want to go back to stock rom - need another kernel - only can be installed by fastboot but i can not access the mode - volume up or down while plugging in usb cable doesn't work, no driver change
keroro84 said:
I try to update my Xperia Z but while need press volume up button and plug in cable, nothing happen~~~
Click to expand...
Click to collapse
same here, trying to to update using Sony PC Companion and was told in the instructions, under step 5, to press and hold volume don key on the phone while plugging the USB cable into your phone, tried several times, even restarted phone, not happening.. HELP!1111111111
- Make sure the phone has charge.
- Remove SD card from phone.
- Make sure the correct divers are installed:
http://forum.xda-developers.com/showthread.php?t=2153261
Scroll down to: [ before we begin unlocking bootloader ]
Here 3 packages are given for fastboot drivers:
download the fastboot package with usb drivers (alternate drivers if the ones in package dont work OR this)
- Try another PC \ USB port \ USB calbe?
- Switch the phone OFF , hold the volume UP button while you plug-in the USB. (DO NOT PRESS POWER!) Blue led?
- Switch the phone OFF , hold the volume DOWN button while you plug-in the USB. (DO NOT PRESS POWER!) Green led?
Does any of these options work?
Kind regards, Stefan.
No change for me, works fine on another PC. But i want to be able to update that phone in my own home.
Thaevil0ne said:
- Make sure the phone has charge.
- Remove SD card from phone.
- Make sure the correct divers are installed:
http://forum.xda-developers.com/showthread.php?t=2153261
Scroll down to: [ before we begin unlocking bootloader ]
Here 3 packages are given for fastboot drivers:
download the fastboot package with usb drivers (alternate drivers if the ones in package dont work OR this)
- Try another PC \ USB port \ USB calbe?
- Switch the phone OFF , hold the volume UP button while you plug-in the USB. (DO NOT PRESS POWER!) Blue led?
- Switch the phone OFF , hold the volume DOWN button while you plug-in the USB. (DO NOT PRESS POWER!) Green led?
Does any of these options work?
Kind regards, Stefan.
Click to expand...
Click to collapse
hi, no one of both options works, also tried hard power off (3 x vibrations and then plugin while holding down/up)
anybody, i have sam problem too...Cant see that flashboot drivers are installed in flastoll?
---------- Post added at 09:58 PM ---------- Previous post was at 09:55 PM ----------
anybody? i have same problem too...
Sauriann said:
anybody, i have sam problem too...Cant see that flashboot drivers are installed in flastoll?
---------- Post added at 09:58 PM ---------- Previous post was at 09:55 PM ----------
anybody? i have same problem too...
Click to expand...
Click to collapse
Keep trying, not a lot else you can do.
Sent from my C6603 using xda premium
XperienceD said:
Keep trying, not a lot else you can do.
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
I got the same issue, cant get to fastboot mode, This issue maybe related to the registry, but i dont know how to deal with it.
Sent from my Nexus 4 using xda app-developers app
chungjimmybb said:
This issue maybe related to the registry, but i dont know how to deal with it.
Click to expand...
Click to collapse
Not sure why, it's usually more to do with user error, so simply retrace your steps and start over.
I tried via Sony PC Companion 2.1 and I get this message:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I use these rom on Xperia Z:
Sauriann said:
I tried via Sony PC Companion 2.1 and I get this message:
Click to expand...
Click to collapse
So use the flashtool then, and read the stickys too.
I tried flashtool at least 20 times. Simply can not start the installation system (vol. down button + USB cable at the same time does not work!). SO, I can not put phone in flashmode enymore. Flashtool see phone in this mode for a few seconds and then stuck. On the phone i have green led for a sec, then nothing...
So any method that requires phone in flashmode is unusable.
Before this i use it (flashtool) several time normaly.
Sauriann said:
So any method that requires phone in flashmode is unusable.
Click to expand...
Click to collapse
Then you need to clean your computer of all things Sony, remove drivers etc and start over. http://developer.sonymobile.com/services/flash-tool/
XperienceD said:
Not sure why, it's usually more to do with user error, so simply retrace your steps and start over.
Click to expand...
Click to collapse
i got the same issue too and just tried in friend's computer with no luck. i am sure to stick with the flashtool guide step by step, but can't do fastboot mode yet.
Ok this (http://developer.sonymobile.com/services/flash-tool/) work, and this "flashtool" is Emma fom Sony Mobile.
Tnx for help.
keroro84 said:
I try to update my Xperia Z but while need press volume up button and plug in cable, nothing happen~~~
Click to expand...
Click to collapse
Wat kind of version do you use? The regular one or beta one?
Sent from my C6603 using xda app-developers app

[q] my galaxy pocket wont start nor can i enter recovery

HEY GUYS !!
I am new to xda so im not sure if i have posted it at the right place.
anyway, my phone (galaxy pocket GTS5300) is rooted runs on infuzion 2 kernel and has hydroperia v2 custom rom(i followed the instructions from xda)
so recently i wanted to increase its ram so i partioned my external sd and installed swapper 2 (just like the post in xda),everything went all right
then i downloaded "file2sd"" from play store and installed it to gets some space in my phones internal memory but as i opened the app and selected
the format as ext3 the said i have to reboot and i pressed the "" restart now ""button,thats it and the phone just got stuck i waited for some time no buttons responded so removed the battery and tried turning it on but it just shows a blank screen after showing the model no. and i CANT enter recovery mode but i can enter odin (but my laptop does not recognize the device,eventhough i have tried installing all the usb drivers and kies ,i dont know if its because of the data cable or windows8 or my phone ) so i removed my external sd copied all my files and saw (in mini tool partition wizard)that my 2nd partition was full(512 mb)i didnt know what to do and i formatted everything(sd).
i dont know what to do next .someone please help!!!
glenzac said:
HEY GUYS !!
I am new to xda so im not sure if i have posted it at the right place.
anyway, my phone (galaxy pocket GTS5300) is rooted runs on infuzion 2 kernel and has hydroperia v2 custom rom(i followed the instructions from xda)
so recently i wanted to increase its ram so i partioned my external sd and installed swapper 2 (just like the post in xda),everything went all right
then i downloaded "file2sd"" from play store and installed it to gets some space in my phones internal memory but as i opened the app and selected
the format as ext3 the said i have to reboot and i pressed the "" restart now ""button,thats it and the phone just got stuck i waited for some time no buttons responded so removed the battery and tried turning it on but it just shows a blank screen after showing the model no. and i CANT enter recovery mode but i can enter odin (but my laptop does not recognize the device,eventhough i have tried installing all the usb drivers and kies ,i dont know if its because of the data cable or windows8 or my phone ) so i removed my external sd copied all my files and saw (in mini tool partition wizard)that my 2nd partition was full(512 mb)i didnt know what to do and i formatted everything(sd).
i dont know what to do next .someone please help!!!
Click to expand...
Click to collapse
So you can actually enter the "download" mode. Thats good at least.
Win 8 comatible driver --> Samsung 1.5.27.0
Which version of odin do you use? This will wotk for you --> Odin 3.07
thanks 4 quick reply
THANKS FOR THE REPLY!!!!!
I HAVE THE USB DRIVER 1.5.23 and still the phone wont work.
actually i have both odin1.85 and 3.09
glenzac said:
THANKS FOR THE REPLY!!!!!
I HAVE THE USB DRIVER 1.5.23 and still the phone wont work.
actually i have both odin1.85 and 3.09
Click to expand...
Click to collapse
Check under device manager if it shows usb device with yellow triangle while phone is connected to computer (Be sure to set show all devices)
yes
LS.xD said:
Check under device manager if it shows usb device with yellow triangle while phone is connected to computer (Be sure to set show all devices)
Click to expand...
Click to collapse
when i used to connect the phone it would show "usb device not recognized".i tried reinstalling the usb drivers but no use.
glenzac said:
when i used to connect the phone it would show "usb device not recognized".i tried reinstalling the usb drivers but no use.
Click to expand...
Click to collapse
you have to force the installation. Right mouse on device. Install driver. select driver manually. (you have to xtract the driver files from the installer first) show "incompatible" devices --> musg be sth like "USB composite device"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
k
LS.xD said:
you have to force the installation. Right mouse on device. Install driver. select driver manually. (you have to xtract the driver files from the installer first) show "incompatible" devices --> musg be sth like "USB composite device"
Click to expand...
Click to collapse
im sorry i havent understood what you said, can you PLEASE explain it in a detailed manner
glenzac said:
im sorry i havent understood what you said, can you PLEASE explain it in a detailed manner
Click to expand...
Click to collapse
device manager shoes "unknown device" with a yellow triangle?
glenzac said:
HEY GUYS !!
I am new to xda so im not sure if i have posted it at the right place.
anyway, my phone (galaxy pocket GTS5300) is rooted runs on infuzion 2 kernel and has hydroperia v2 custom rom(i followed the instructions from xda)
so recently i wanted to increase its ram so i partioned my external sd and installed swapper 2 (just like the post in xda),everything went all right
then i downloaded "file2sd"" from play store and installed it to gets some space in my phones internal memory but as i opened the app and selected
the format as ext3 the said i have to reboot and i pressed the "" restart now ""button,thats it and the phone just got stuck i waited for some time no buttons responded so removed the battery and tried turning it on but it just shows a blank screen after showing the model no. and i CANT enter recovery mode but i can enter odin (but my laptop does not recognize the device,eventhough i have tried installing all the usb drivers and kies ,i dont know if its because of the data cable or windows8 or my phone ) so i removed my external sd copied all my files and saw (in mini tool partition wizard)that my 2nd partition was full(512 mb)i didnt know what to do and i formatted everything(sd).
i dont know what to do next .someone please help!!!
Click to expand...
Click to collapse
The Best Solution Is :
Press thanks if It helps
Download CWM From here : http://forum.xda-developers.com/attachment.php?attachmentid=1461120&d=1352197095
Download Stockrom from here : http://www.4shared.com/zip/SZzB-egN/S5300XXLF5_S5300BTULF1_BTU.html
Put both zips in your sd card
go to recovery mode by pressing vol up + home button + power button (Hold for 10 seconds)
Now in recovery mode select apply update from sd card and select cwm file...
Now in cwm mode again go to apply update from sd card ...
Select Stock ROm ZIP...
You will now boot normally
N'ayam Amarsh'e said:
Download The Samsung Unbicking Software from Here http://forum.xda-developers.com/showthread.php?t=1153310 and try it out and if it works press thanks button and also of the creator of this software....
Click to expand...
Click to collapse
Have you tried this before? I did --> no success at all, its made for Galaxy S. Sure try it out
PM me if ya want something-...
further?
LS.xD said:
device manager shoes "unknown device" with a yellow triangle?
Click to expand...
Click to collapse
ok i am working on it
if at all it works what am i to do next?
what all files should i have?
LS.xD said:
Have you tried this before? I did --> no success at all, its made for Galaxy S. Sure try it out
PM me if ya want something-...
Click to expand...
Click to collapse
It's edited now....
glenzac said:
ok i am working on it
if at all it works what am i to do next?
what all files should i have?
Click to expand...
Click to collapse
you have extracted samsung drivers in a folder on your desktop????
right mouse button on unknown device - install driver - searh pc for drivers -> show list -> select folder where the samsung driver is stored -> unmark "compatible devices" and then you can manually select a device if it shoes not compatible -> ignore just install
before we fill 20 more pages may be you can install "gtalk"?
what next???
N'ayam Amarsh'e said:
It's edited now....
Click to expand...
Click to collapse
the soft brick software will not do as i can access odin
so can someone please help me to go ahead with odin
what files would i require?
also there is another major problem my phone wont charge.the second i connect the charger the phone tries to turn on and returns back to the black screen,
please help
glenzac said:
the soft brick software will not do as i can access odin
so can someone please help me to go ahead with odin
what files would i require?
also there is another major problem my phone wont charge.the second i connect the charger the phone tries to turn on and returns back to the black screen,
please help
Click to expand...
Click to collapse
MAN did you installed driver as i said? when its showing Samsung USB comosite device --> flash stock rom with odin. S5300 Stock firmwares make sure to have your region
Your phone has to b connected in "download" mode (by pressing the 3 button combo)
If you cant enter download mode? release battery and connect phone to pc with usb cable then press Vol- and home and power and put back in battery while. Your computer should get the device.
you flash stockrom using odin.
Sry for that complicated chat, but its not that easy using a browser based chat for that. Also you got more then 1 person tell what to do. Seems not workin that good...
So if something is still not cleat, may be install GTalk for easier chat or teamviewer that i can "show" what i mean.
regards
no luck
LS.xD said:
MAN did you installed driver as i said? when its showing Samsung USB comosite device --> flash stock rom with odin. S5300 Stock firmwares make sure to have your region
Your phone has to b connected in "download" mode (by pressing the 3 button combo)
If you cant enter download mode? release battery and connect phone to pc with usb cable then press Vol- and home and power and put back in battery while. Your computer should get the device.
you flash stockrom using odin.
Sry for that complicated chat, but its not that easy using a browser based chat for that. Also you got more then 1 person tell what to do. Seems not workin that good...
So if something is still not cleat, may be install GTalk for easier chat or teamviewer that i can "show" what i mean.
regards
Click to expand...
Click to collapse
sorry for responding late i tried all that you said but no luck.
i am beginning to suspect it is the problem of the cable or of the phones jack
Hey ,
Just install Kies and uninstall that USB driver . Download files exept .pit and try again . If boot is force closing , go to recovory mode . It should work . Worked in my case
Sent from my GT-S5300 using xda app-developers app
sorry everyone for the late reply
I had gone on a long trip on my way back I also bought an USB cable then it worked perfect ,and I flashed stock Rom with Odin. Alright
Thanks
Now I have a new query can I upgrade my galaxy pocket to jelly bean.
Please help

n7000 won't turn on no recovery only download mode

my phone after i downloaded stock rom (don't have another information about it it wasn't me) didn't open, only black screen when i press power button nothing happens but when i connect usb cable firstly it was getting like it was charging now it just keep appearing and disappearing but when i press (power button +vol. down +menu button) i gets me to download mode i tried many times to get to recovery but i can't please help me it's been 2 days and i can't find a solution .
roryror2010 said:
my phone after i downloaded stock rom (don't have another information about it it wasn't me) didn't open, only black screen when i press power button nothing happens but when i connect usb cable firstly it was getting like it was charging now it just keep appearing and disappearing but when i press (power button +vol. down +menu button) i gets me to download mode i tried many times to get to recovery but i can't please help me it's been 2 days and i can't find a solution .
Click to expand...
Click to collapse
Download Odin and Stock rom for your phone, open odin click on PDA and navigate to your stock rom you downloaded, check Auto Reboot and F.Reset Time checkboxes in odin put your phone i download mode Connect USB data cable to Phone. The ID:COM box will will be highlighted and turn to color yellow when the phone is properly connected and already detected with Odin. Tick the 'START' button when all is set and ready to begin flashing. Don't touch phone while odin is flashing wait until you get green box with PASS sign and until your phone reboots, and do full reset. Hope it helps.
RoloRS said:
Download Odin and Stock rom for your phone, open odin click on PDA and navigate to your stock rom you downloaded, check Auto Reboot and F.Reset Time checkboxes in odin put your phone i download mode Connect USB data cable to Phone. The ID:COM box will will be highlighted and turn to color yellow when the phone is properly connected and already detected with Odin. Tick the 'START' button when all is set and ready to begin flashing. Don't touch phone while odin is flashing wait until you get green box with PASS sign and until your phone reboots, and do full reset. Hope it helps.
Click to expand...
Click to collapse
i tried to flash stock rom but still same problem.
roryror2010 said:
my phone after i downloaded stock rom (don't have another information about it it wasn't me) didn't open, only black screen when i press power button nothing happens but when i connect usb cable firstly it was getting like it was charging now it just keep appearing and disappearing but when i press (power button +vol. down +menu button) i gets me to download mode i tried many times to get to recovery but i can't please help me it's been 2 days and i can't find a solution .
Click to expand...
Click to collapse
If your phone is still detectable in odin follow the instructions for odin in this link:
http://forum.xda-developers.com/showthread.php?t=1901191
boot into download mode
start odin3 and configure it as in picture below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
connect phone in download mode to PC via USB
press start to flash the tar.md5 package
Location of tar.md5 recoverys: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7000/
Then once youve got a working recovery just pick ur rom and flash from extrnal sd card
Good luck m8
pdolton2000 said:
If your phone is still detectable in odin follow the instructions for odin in this link:
http://forum.xda-developers.com/showthread.php?t=1901191
boot into download mode
start odin3 and configure it as in picture below
connect phone in download mode to PC via USB
press start to flash the tar.md5 package
Location of tar.md5 recoverys: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7000/
Then once youve got a working recovery just pick ur rom and flash from extrnal sd card
Good luck m8
Click to expand...
Click to collapse
thanks for your reply but still same problem .
roryror2010 said:
thanks for your reply but still same problem .
Click to expand...
Click to collapse
Thats fine pal...so what did odin say...was it detectable...did it appear to flash ok but just doesnt let you boot into recovery on the phone or was there an error with odin?
The more info the more we can help
pdolton2000 said:
Thats fine pal...so what did odin say...was it detectable...did it appear to flash ok but just doesnt let you boot into recovery on the phone or was there an error with odin?
The more info the more we can help
Click to expand...
Click to collapse
ok the device was detectable flash was pass there was no errors but when i press [vol. up + power +menu] nothing happens.
roryror2010 said:
ok the device was detectable flash was pass there was no errors but when i press [vol. up + power +menu] nothing happens.
Click to expand...
Click to collapse
Maybe your plus key is not working?
If odin detected it, and odin said pass thats impossible unless it really was successful...that recovery is on there alright...its just that plus button must be to blaim...question is how can you test the plus button really works?
EDIT
Hang on did odin say pass when flashing your stock rom before Using rolors's suggestion?
---------- Post added at 09:44 PM ---------- Previous post was at 09:23 PM ----------
roryror2010 said:
ok the device was detectable flash was pass there was no errors but when i press [vol. up + power +menu] nothing happens.
Click to expand...
Click to collapse
Ok this is the only other thing you can try. There is a way of using adb commands to kick your device into recovery mode...and adb commands to install roms...first you need this neat piece of software For windows so you can use adb commands to your phone
http://forums.androidcentral.com/so...g/415287-open-source-adb-console-wizzrah.html
Then type "adb reboot recovery" i think whilst in dwnload moad to see if at least it tries to....if you see dwnload mode dissapear you know it recieved the command at least...best i can do...a quick google of adb commands will show you more Though
Good luck.
pdolton2000 said:
Maybe your plus key is not working?
If odin detected it, and odin said pass thats impossible unless it really was successful...that recovery is on there alright...its just that plus button must be to blaim...question is how can you test the plus button really works?
EDIT
Hang on did odin say pass when flashing your stock rom before Using rolors's suggestion?
---------- Post added at 09:44 PM ---------- Previous post was at 09:23 PM ----------
Ok this is the only other thing you can try. There is a way of using adb commands to kick your device into recovery mode...and adb commands to install roms...first you need this neat piece of software For windows so you can use adb commands to your phone
Then type "adb reboot recovery" i think whilst in dwnload moad to see if at least it tries to....if you see dwnload mode dissapear you know it recieved the command at least...best i can do...a quick google of adb commands will show you more Though
Good luck.
Click to expand...
Click to collapse
thanks for your reply i tried adb console while i'm on download mode first i entered "adb reboot recovery " i got "Error: error: device not found" then i entered "adb devices" and there was nothing in "list of devices"
roryror2010 said:
thanks for your reply i tried adb console while i'm on download mode first i entered "adb reboot recovery " i got "Error: error: device not found" then i entered "adb devices" and there was nothing in "list of devices"
Click to expand...
Click to collapse
Out of curiosity is there any unknown devices in device manager when its in dwnload mode? Or anything with a yellow exclamation mark...its strange because odin only detects devices with adb drivers installed so this adb software should pick it up really....if everything seems fine in device manager try right clicking on this program and pressing run as administrator....ive never used this program though so ill experiment tomoz myself with it and report back....we will not be beaten lol
roryror2010 said:
thanks for your reply i tried adb console while i'm on download mode first i entered "adb reboot recovery " i got "Error: error: device not found" then i entered "adb devices" and there was nothing in "list of devices"
Click to expand...
Click to collapse
You haven't configured adb correctly for your computer. If it was done properly, you would have got your device listed.
Please follow proper instructions before attempting anything worthy to your device.
i did it now i can reach recovery mode and i tried to wipe cache n data but ;i'm facing the same problem i only got to recovery mode while usb cable is connected it gets me battery logo but it doesn't charge it keeps gets on n off i pressed (vol. up +menu +power) i was able to get to recovery mode ,any suggestions
nobody can help me or what ??
Problem Solved
finally i solved my problem i just bought a new battery and it worked like a charm ,
thank you guys for trying.

Categories

Resources