Related
Hi,
I'm asking for some guidance from the people who have actually changed their housing on the Xperia.
I bought a silver one with some cracks, and some marks on the housing. However, €60 for a brand new black housing would be a good deal for me, as long as I would manage to replace it succesfully.
I changed the housing on my SE P1i from the silver one to a black one before, and already found that quite hard, and now that I've seen the instruction video and read the service manual on how to change the housing, I'm a bit hesitant about replacing it, in the fear that I would break my new €200 smartphone.
So, have any of you done this, how hard was it, and how much experience did you already have dis- and reassembling phones?
Also: Did any of you manage to break anything in the process?
Thanks in advance, and sorry for my bad English,
Ed Banger
check this out:
For front: http://www.youtube.com/watch?v=RcDqyEyC_HY
& rear: http://www.youtube.com/watch?v=AWDurQrRt-Y
I think you can get complete housing for approx $100 if you shop around. http://cgi.ebay.co.uk/ws/eBayISAPI....Category=20345&_trkparms=algo=LVI&its=I&otn=1
Hi I also would like to change my housing because of some cracks, this is my first time. so will it be really difficult for a newbie?
also, where to buy to get the cheapest yet legit?
I found this cnn.cn is it safe everyone? it currently offers 79.99 USD for the full housing. is that the market price? thanks guys.
I changed a lot of phone houses and the one of xperia is easyer than nokia ones. if you follow the instructial movie on youtube you will not have any problem there are some dificult places.
here read this thread its posted by Crank1 its his experiance with changing the housing. http://forum.xda-developers.com/showthread.php?t=550258
80 Dollar is the market price i think the cheaper ones are used or not originaly SE housing.
goog luck with changin the housing.
thanks for the reply, now its quite a dilemma which one I should buy, the used one is 43AUD while the new one is almost 100AUD. Is the new one really worth it? The used one description says its fascia while the 100AUD is OEM. any suggestion would be great. thanks
much harder than it looks
vietdoan20062006
I did it last week
Hi Ed,
See my post for info....hope it helps & good luck!!
http://forum.xda-developers.com/showthread.php?t=550258
Can't read lol
Ooops, just noticed Commodoor had already given you the link. Hope it helped.
Crank1 said:
Ooops, just noticed Commodoor had already given you the link. Hope it helped.
Click to expand...
Click to collapse
Yhea i beat yha
I did buy a new housing for 80$ and i did get buy a hard case for preventing it getting scratches.
so what did you do, you gonna give it a try?
80$ for housing, it must be gold housing to be charged at the price,
seriously, checkout ebay, amazon they offer lots cheaper.
i would pay $20 for housing only
Ive done a few already, not too hard if you know what you doing and be careful.
I have changed the housing of my Xperia partly. Read the story here: http://forum.xda-developers.com/showpost.php?p=4403612&postcount=14
It's quite easy if the housing fits well, the cheap housing does not fit very well....
hey guys... i dont really want to change my housing cause its more or less 100%...
HOWEVER i have a slight problem with the screen not being tight (mate has the black one and apparently they dont have the problem - and i can feel his one doesnt move a mm when its extended... whereas mine has a slight give)
whats the best method to tighten it?
(will it be obvious when i pry it apart?)
ryousuke said:
hey guys... i dont really want to change my housing cause its more or less 100%...
HOWEVER i have a slight problem with the screen not being tight (mate has the black one and apparently they dont have the problem - and i can feel his one doesnt move a mm when its extended... whereas mine has a slight give)
whats the best method to tighten it?
(will it be obvious when i pry it apart?)
Click to expand...
Click to collapse
I had the same problem. after i changed mine housing and made it black it was gone. maybe the black ones are a little bit better
The silver is so much nicer looking thou
the black looks weird with a silver kb
but thatsjust me
anyone have a silver model which screen is as the black unit? (i.e not flexing)
ryousuke said:
The silver is so much nicer looking thou
the black looks weird with a silver kb
but thatsjust me
anyone have a silver model which screen is as the black unit? (i.e not flexing)
Click to expand...
Click to collapse
yhea i have to admit the keyboard looks weird but the front is black and that looks weird on the silver one. so you have to make a choice. people see the front first and that makes the impression
is this housing http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=260453968402&ssPageName=ADME:X:RTQ:US:1123 a FURTHER rip-off in quality as the OEM found here http://cgi.ebay.com/OEM-SONY-ERICSS...ries?hash=item2ea6dd8d1e&_trksid=p3286.c0.m14
i want to buy a new housing but i don't wanna buy one with less quality than the original
what are your thoughts on the pics there?
Judging by the pics both fascias seem identical. Although don't know why this big pricing difference. Maybe the first auction is for a replica housing? Don't have large pics as the second auction so we can tell for sure.
Also, at CNN http://cnn.cn/shop/sonyericsson-xperia-c-28_638.html the housings are pricey. For me go for the second auction or buy from CNN, you will be 100% sure that the housing is the OEM.
yeah i was looking at the $24.00 on ebay too... someone should buy it and tell me how it is
i think im gonna let this pass and sell my x1 as it is, im thinking of leaning towards the touch diamond 2 i will miss my keyboard but what the heck
Yo!
I ordered the $24.00 last week... When I receive the housing parts, I will take pictures and spread the message....
Fingers crossed......
Damn the cracks....Its a pity to sacrifice a gd device just now that some gd new things are coming....senseUI....Leo...sure it'll come for d2 too.....but no KeyBoard there.....I have ur very same problem...but I'll try the case !!
Received the housings yesterday.
They're certainly not OEM (maybe the backcover is, the rest not). The outside looks quite nice finished, the set is quite complete (with some tools for the fitting). From the two sets I ordered, one has a large gluestain on the top part of the housing (below the LCD). This gluestain damaged the paint. So I decided to start transferring the phone in the other housing.
After dissecting the phone I started with the assembly of the screen part. The speaker fitted not quite nice, so took some feddling to get mounted. At last it fitted (the print on top of the speaker fitted just). Closing the top part of the housing was a mess. The snap-locks didn't snap (partly) and on one side the housing did not flush fit. The (original) screws did not fit in the thread bushings.... With some fiddling I sort of managed to fit them. Then on with the bottom part. The new chrome buttons do not fit in the new chrome housing part.......
This is were I give up for yesterday. I think I'm going to rebuild the old housing en give up on the new one....
So.....
Decide for yourself if it's worth the trouble.... The housing looks quit neat (not as good as OEM though) but the fitment process is quite troublesome. Delivery was fast and the package is complete (including self-adhesive rubber for screen and speaker fitment). I will get in touch with the guy from Ebay with my findings.... Maybe I'm doing something wrong....
Will post some pictures tomorrow or something....
thnx ur comments were of gr8 benefit to me.....will be gladly w8ing for the pics !
thnx, ur comment were of gr8 benefit to me.....will be gladly w8ing for the pics !
thnx dude, im waiting on mine to be delivered,
looking forward for more reactions...
@Fliptil
From a scale from 0-10, how hard was it to do?
Before starting myself, I want to know if i'm capable of doing this.
To be honest, I know how to fix stuff, but don't know if I can do this trick..
Thanks for sharing anyway
Does anybody know, where i can buy a non branded battery cover for my sliver x1?
It is branded with T-Mobile, but i would like to have it blank or non-branded.
An original one is 25 € in ebay Germany. That's too much. So a cheap one would be fine.
Thanks in advice for all tips!
Best regards
Jog
ebay dude, i purchased one 2 weeks ago for about 10 GBP
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170363212269
OK guys....
I managed to revive the Xperia tonight.... It has become a hybrid with the metal (original) front and black backside. The middle part is also left original. So the only part I ended up exchanging has been the back cover.
First of all; kudo's to HTC for making the Xperia somewhat sturdy (at least the inside is...). The amount of mechanical havoc tha has been put through the innards of the phone are substantial... And still everything functions!!
After the initial assembly attempt a few weeks ago, I was sure that I had wrecked my phone trying to assemble it with the new housing. Some parts did not fit really well, and the (original) screws did not quite fit the (new) threaded bushings. Halfway through the assembly process I ran into the new chrome buttons not fitting in the new chrome middle part and I gave up on assembly for the time being. After recharging myself for a couple of weeks I forced myself to take up the task of finishing the assembly of the phone tonight...
First I had to disassemble the phone (I was halfway assembling it...) again. I decided to use the original front (had some scratch damage and a very small crack) to surpass the not-fitting thread bushings in the new part. This was a problem... One of the screws had settled in the not-fitting thread bushing and decided to not unscrew, but turn the bushing in the plastic instead. After trying careful and not damaging anything for some time I decided it was time for the hobby knife and screwdriver (as crowbar...). The new front cover did not survive this operation. The screw and the innards of the phone did however!! Reassembly using the old front cover was quite easy, as was reassembly of the back using the original middle part. In the new back part was the thread bushing missing for fixation of the speaker... I used the not-fitting bushing from the front cover as bushing for the speaker fixation. Off course after I made the bushing fitting by forcing the screw in the bushing using a sturdy screwdriver and a set of pliers. This bushing was hammered (carefully...) into the location where the bushing should have been.... This sort of worked. The new back cover does not fit as neat into the original middle part as the original back cover, but it did fit (with some force). The plastic lip that fixes the SIM card was a bit to long, so I had to cut of 0,5mm to make it fit the SIM card. And last but not least only one of the two new battery covers was able to get a grip on the phone...
Then came the thrilling moment to switch on the phone.... Everything worked as if nothing had happened!! So end good all good; I have a phone that looks quite neat (part brushed metal - part black) and functions.
If it was worth the hassle... I doubt it... When you've got a phone that is in pieces and you want spare parts to repair it (as cheap as possible and you like some hobbying) then go ahead and buy this housing. If you want a phone that looks as good as new (and you don't want to risk a heart attack or nervous break down) then I guess you're better off leaving this housing as it is.... For a phone that's worth a few hundred bucks I think this housing is not OK. For a scrapheap phone that needs revitalisation for a small amount of money than it's OK.... If I had to do it all again I think I would have gone for an OEM housing.... After all, I'm happy that my phone functions again so I can leave the TYTN at home. I was to stubborn to buy another housing...
This has become quite a story, hope it will be of any help to somebody. Now I must see if I can post some images....
Grreetz,
Ronald
Some pictures.... try if it works....
Hmm i've dropped my poor x1 on the concrete sidewalk as i got out of my car.
Amazingly it must be good quality because there are a only a couple of scratches on the front and some damage on the rubber around where the
stylus is, but otherwise everything works and is functional.
What this experience did, was got me lookin for spare parts in case I'd
ever need them. As a result I ordered from the same person on eBay 2 days ago
and I just now found this post. Needless to say, I'm damn scared that I've
wasted the money. You tried to fit the black parts on a silver X1, and mine is black,
so I'm crossing my fingers that for some unknown odd fantastical reason, it fits better on the black version. Also may ask whether your model is an x1i or x1a?
I'm guessing b/c its silver its an x1i but u can nvr be to sure. As for me, mine is
a black x1a. I'll post back if i have any updates.
Hi Nick.
I've got a X1i, as you had already guessed.... The mixing of the parts is also a bit of a risk.... The chrome middle part (original) has suffered some damages during my disassembly actions to start with... And has developed some new cracks in the use as a hybrid. Maybe I've overtightened some screws, or maybe the bottom part does not fit well enough so it develops to much tension I don't know...
I've decided to use the X1 till it dies, and to buy something else (no slide keyboard) a little bit more sturdy when it does. I am not going to do any repairwork on it. The design is simply flawed, I have had it repaired at SE once, when it came back it was broken again within two months. These stories can be found al over the internet, so I am not going to repair it again (just to get it broken again). I am not careful enough for a phone like this (however, my colleague also has a X1 that's broken and he is very careful...) I guess.
Just my two cents.
thanks fliptil I'll keep those things in mind.
Before i dropped my x1 for the first time. There was some kind of defect in the silver middle part. At first it was a slight crack so i thought nothing of it, until a piece fell right out of it. Until now i've never needed to go through the process
of getting something fixed and was my experience painful. I got mine through a carrier (Rogers) so I called them on the phone. I was on hold forever, and when I finally got through they told me I had to go to a rogers store to have someone
personally take a look at it.
I got to the store, got on their phone, and was on hold for 20 minutes. When I got through they told me they would connect me to a specific department.
Another 20 minute wait.
I got through and then gave the phone to a rogers employee there. He confirmed that it should be a defect as there were no signs of dropping it and then HE waited 20 minutes while the guy on the line called sony.
I waited all that time to find out that I cannot get it replaced through my carrier but had to go through sony themselves.
I looked up some stories of experiences with SE's services and found that most (if not all) of the time they replace your x1 with a refurbished one, and I wasn't about to trade a perfectly brand new one with a minor ding in it, for
one that could be potentially scratched up and badly treated.
Now that I've dropped it though I fear that whether the defect gets worse or not I cannot get Sony's warranty on it. However, after what you've just told me I don't think I want to. Here's to hoping that i won't have to do x1
surgery anytime soon...
hi all,
i got a bargin latly and have now got a note but the main donside to this is that is has a chip/crack on the edge of the screen near the menu button.
i need to know anyone oppinion if i can get away with just repacing the digitizer or wil i have to repace the full lcd aswell, im really low on cash now but iv been checking ebay and heres what i found
digitizer - £8.95/$13.89
http://www.ebay.co.uk/itm/Front-White-Digitizer-lens-Glass-Screen-For-Samsung-Galaxy-Note-i9220-N7000-/300733099033?pt=LH_DefaultDomain_0&hash=item460516ec19
full lcd + digitizer - £118.04/$138.24
http://www.ebay.co.uk/itm/LCD-Touch-Digitizer-Screen-for-Samsung-Galaxy-Note-GT-N7000-i9220-white-/221002976265?pt=LH_DefaultDomain_0&hash=item3374cdcc09
iv added the pics bellow and would love feedback to see what is the best situation for me. my so called local samsung repair centre who carnt even fix phones propperly (feedback from alot of people with broken screens) said that i have to replace it all and they quoted me £180.
please let me know guys
Ive seen worse
A simple digitizer replacement should suffice, theres numerous how to videos on you tube.
Just take your time and do not rush it, Also, Dont skimp on the price, If you get a cheap aftermarket digitizer, the performance might not be as good as a genuine one.
Finally, once you get it fixed, There is an app that can tune the sensitivity so you can get it perfect I think its called screentuner im not sure, google it !
azzledazzle said:
Ive seen worse
A simple digitizer replacement should suffice, theres numerous how to videos on you tube.
Just take your time and do not rush it, Also, Dont skimp on the price, If you get a cheap aftermarket digitizer, the performance might not be as good as a genuine one.
Finally, once you get it fixed, There is an app that can tune the sensitivity so you can get it perfect I think its called screentuner im not sure, google it !
Click to expand...
Click to collapse
thanks man really appreciate your help i didnt realise if i got a cheaper one would make it work crap. how much would you say to speand roughly?
btw i kno it isnt the worst but i ike my phone to be in mint condition especialy as i get bored very easy then it ends up in the mp withing 2 months lol
im not saying buy a really expensive one and get ripped off, I just mean dont buy one made from cheap parts, Like a chinese one.
If you could afford it, Buy genuine, If you cant, buy a recommended one, Check the sellers feedback and scour the internet for recommendations, There may even be some in the accessories section
EDIT: Im unsure whether the amoled screen is an all in one screen, Meaning the screen also recognises the touch and there is no digitizer, Does your phone respond to touch ?
Look at this i found on ebay - http://www.ebay.co.uk/itm/Outer-Len...arts_Tools&hash=item20c7b38727#ht_2782wt_1037 It is just the outer glass screen, So if you get this, It wont affect the touch response :good:
I understand that it would affect the sale price, but be careful as I've found the most difficult thing to do is to separate the digitizer from the LCD screen without patience. The safest route would be to get the Digitizer + LCD costs, but ofc it costs ridiculously higher than just the digitizer.
For howto videos, search for "Galaxy Note Disassembly" on YouTube.
Yeah +1
Upon some more searching it seems like a really tricky job, Some say impossible, The choice is yours really, Try it and hopefully save your self some money, Or take the hit and get the whole package - Screen, Glass, digitizer ect.
You could also look at some sort of glass crack repair kit, Like they do on car windscreens, Its only a little crack where the soft keys are so its not disrupting the view of the screen, And it might just save some £££ and a lot of hassle too
again thanks guys,
the thing is all aspects of the screen are fully functioning. it did get it at a very good price i will admit it was cheap but it was only because it was too big for the women who had it previous and cex offered her £190 but wouldnt take it because o the crack!
im all for making sure my device look good i know you can say it doesnt ook bad but its just if it was cheap enough to fix i will do it. or if i end up putting it in the MP in a few weeks when i bored it can either buy and throw in the digitizer or the full pakage.
over than that this is why i posted iv never dont it before and iv sceen my mate do his galaxy s1 but thats it lol
I put my phone to charge before sleeping yesterday, when i woke up, i unlocked the screen and phone was charged fully,
Suddenly after 3 or 4 seconds my screen went black! but i still can hear touch sounds, my computer recognizes the phone storage and i can feel the vibration when i turn it on or off.
I've also tried wiping and flashing a stock ftf through flashtool, nothing.
So my guess is the screen is completely dead and i will be replacing it shortly but before
is there any way to make sure that the problem is with the touch panel only? so it's not related to the motherboard or any other component?
To make sure that screen is dead use hammer or other heavy and hard object.
You need to place it on the screen with good amount of speed to get give this object more power.
I would recommend dropping it in the middle of the screen so you could be sure that screen is dead.
Im not recommending using car or dropping it from high, because there is a chance that you would kill not only screen but also other components of the phone.
Akinaro said:
To make sure that screen is dead use hammer or other heavy and hard object.
You need to place it on the screen with good amount of speed to get give this object more power.
I would recommend dropping it in the middle of the screen so you could be sure that screen is dead.
Im not recommending using car or dropping it from high, because there is a chance that you would kill not only screen but also other components of the phone.
Click to expand...
Click to collapse
That's not funny at all.
Well... when I saw this title I could not resist...
But to be on topic. If fresh flash dont help, there is no "software" way to check if screen is dead for sure.
XZ construction is tight as hell, and only way to fix screen is replace it in service center OR make it by yourself.
On aliexpress you can buy XZ screen for less than 25 euro
http://www.aliexpress.com/item/Orig...LCD-Screen-With-Touch-display/1894781909.html
http://www.aliexpress.com/item/Blac...Z-L36h-L36i-C6606-C6603-C6602/1901021035.html
Its not much, and if you played a bit with phones before its gonna take you less than 30min.
I ordered screens from ali few times, for my old Xperia Arc S and Neo V. no problem still work like new.
But because you need to remove back panel, I would recommend buying it too, its less than 7 euro for panel with NFC antena
You get all tools with it, and only what you need it hair dryer or wet towel that you put in microwave. Its necessary to unglue back panel.
PS. I know that it sound weird, but one time when I have Galaxy S and screen was dead... I throw it ""by accident"" on the ground... and its start working xD Im not saying that you should throw it... but you know... ""shake that baby""
Akinaro said:
Well... when I saw this title I could not resist...
But to be on topic. If fresh flash dont help, there is no "software" way to check if screen is dead for sure.
XZ construction is tight as hell, and only way to fix screen is replace it in service center OR make it by yourself.
On aliexpress you can buy XZ screen for less than 25 euro
http://www.aliexpress.com/item/Orig...LCD-Screen-With-Touch-display/1894781909.html
http://www.aliexpress.com/item/Blac...Z-L36h-L36i-C6606-C6603-C6602/1901021035.html
Its not much, and if you played a bit with phones before its gonna take you less than 30min.
I ordered screens from ali few times, for my old Xperia Arc S and Neo V. no problem still work like new.
But because you need to remove back panel, I would recommend buying it too, its less than 7 euro for panel with NFC antena
You get all tools with it, and only what you need it hair dryer or wet towel that you put in microwave. Its necessary to unglue back panel.
PS. I know that it sound weird, but one time when I have Galaxy S and screen was dead... I throw it ""by accident"" on the ground... and its start working xD Im not saying that you should throw it... but you know... ""shake that baby""
Click to expand...
Click to collapse
I was already considering the "shake that baby method", it might be just a problem with some inner connection or cable or something.
That's why i was asking if there's is a method to make sure that the screen is completely dead, so i might not need to replace the whole panel.
And about the replacements, i read some reviews on similar products on amazon, most are complaining that they started to see blurry text, lower brightness, microphone not working and alot of other problems, you seem exprerienced with the procedure of repairing so what do you think?
Well, in terms of changing screens I bought screens only for Xperia Arc S and Neo V If we talk about smartphones :]
I speed almost whole day looking for it on eBay and Aliexpress. Of course before that I checked professional shops and local services, but its F hilarious that they want even 150% of phone price JUST FOR SCREEN....
I always sort list by number of orders, so I have chance to read more comments, and most of this time I spend reading them. If I found even single comment that say that quality is bad... I checked next one. And after few hours I had 2-3 screens to choose.
And in terms of quality... its hard to tell, most of problems are made by person who put that screen in phone, not screen it self. And because as I said build quality of new phones are tight as hell, 0.5mm difference and something is not working.
But overall quality of those screens that I had where good. I didnt had problem with brightness, ghosting(in moving object) or blurry text. I only had problem with less saturated colors. Difference is not huge, but if you spend with phone some time you see that its about 10-15% less saturated.
To be honest with buying something online that is more complex than brick and it contain electronic components its always hit and miss...
I could had luck with screen, someone could not have... Normally I trust online shops, but its better to spend whole day in front of PC than buying first product from the list...
In terms of actual replacement, instead of inventing wheel again, just check YT videos, watch few of them, and if they have link in description for screen, check them, sometimes they give link to screen that doesnt cost fortune and you know that you can get good quality product.
here are few of them:
https://www.youtube.com/watch?v=dfXaze8AS2o
https://www.youtube.com/watch?v=U_hXv-Fouio
Just remember to prepare everything, flat place for work, all tools, and few cups or bowls for parts... flat table or not, Its better to keep all screws in bowl :]
Akinaro said:
Well, in terms of changing screens I bought screens only for Xperia Arc S and Neo V If we talk about smartphones :]
I speed almost whole day looking for it on eBay and Aliexpress. Of course before that I checked professional shops and local services, but its F hilarious that they want even 150% of phone price JUST FOR SCREEN....
I always sort list by number of orders, so I have chance to read more comments, and most of this time I spend reading them. If I found even single comment that say that quality is bad... I checked next one. And after few hours I had 2-3 screens to choose.
And in terms of quality... its hard to tell, most of problems are made by person who put that screen in phone, not screen it self. And because as I said build quality of new phones are tight as hell, 0.5mm difference and something is not working.
But overall quality of those screens that I had where good. I didnt had problem with brightness, ghosting(in moving object) or blurry text. I only had problem with less saturated colors. Difference is not huge, but if you spend with phone some time you see that its about 10-15% less saturated.
To be honest with buying something online that is more complex than brick and it contain electronic components its always hit and miss...
I could had luck with screen, someone could not have... Normally I trust online shops, but its better to spend whole day in front of PC than buying first product from the list...
In terms of actual replacement, instead of inventing wheel again, just check YT videos, watch few of them, and if they have link in description for screen, check them, sometimes they give link to screen that doesnt cost fortune and you know that you can get good quality product.
here are few of them:
https://www.youtube.com/watch?v=dfXaze8AS2o
https://www.youtube.com/watch?v=U_hXv-Fouio
Just remember to prepare everything, flat place for work, all tools, and few cups or bowls for parts... flat table or not, Its better to keep all screws in bowl :]
Click to expand...
Click to collapse
Thank you for your help
last thing
what do you think of this http://www.aliexpress.com/item/Blac...ame-Assembly-Replacement-Part/1449119790.html
This look a bit average looking at comments, most of problems are with dead pixels.
Weird that for XZ screens there are less offers that I would though :/
I found this one that look promising:
http://www.aliexpress.com/item/For-...6601-LCD-display-touch-screen/1902384532.html
and if you want whole front panel
http://www.aliexpress.com/item/For-...e-Assembly-Black-Replacement/32279043240.html
But as I said its hard to tell if you get screen without problems... I would say to check eBay or Amazon, but to be honest its all from the same place so what the difference?
Akinaro said:
This look a bit average looking at comments, most of problems are with dead pixels.
Weird that for XZ screens there are less offers that I would though :/
I found this one that look promising:
http://www.aliexpress.com/item/For-...6601-LCD-display-touch-screen/1902384532.html
and if you want whole front panel
http://www.aliexpress.com/item/For-...e-Assembly-Black-Replacement/32279043240.html
But as I said its hard to tell if you get screen without problems... I would say to check eBay or Amazon, but to be honest its all from the same place so what the difference?
Click to expand...
Click to collapse
Thanks man
hey guys
so last week something unbelievable happened to me and i say unbelievable because no one will believe what happened but thats it what can i do about it xD OK so last week my G Watch fell from my hand while wearing it and it fell off on my Xperia Z from about 20 centimeters and i didn't care that exact moment because i said like WTF it wont harm the device and after 2 minutes i opened my phone aaand its just not working the screen was broken from the area on the left of the microphone and the phone wont work but from a special small area anyways i went to my local Sony agent and he told me that the digitizer cant be replaced alone and that they will be replacing the whole LCD Display so i went to some other 3rd party repair-shops and they said the same thing and they will be replacing it with a non-original Display that cost 1/5 the price of the one that the Sony Agent offered me ( Sony Agent told me that it costs 170 Jordanian Dinars which equals 240 USD and the phone itself new unlocked costs pretty much less than that in my country ( Jordan ) )
Anyways i was wondering guys if i can replace the digitizer alone by myself (by ordering it from eBay or so and disassembling the phone and replacing it at home ) or should i replace the whole LCD Display ?
(Sorry if i had any English mistakes but i"m not a native English tongue )
Best Regards,,,
I had broken touch screen and i watched video on YouTube how to repair just touch screen, ordered just touch screen from Ali and I broke the digitalizer so i ordered whole screen with mask after. My point is, if you don't have tools and skills (or is you first time) buy whole (touch screen + digitalizer) and replace them.
Good Luck!
Sent from my XPERIA M2 using Tapatalk
Dzepar said:
I had broken touch screen and i watched video on YouTube how to repair just touch screen, ordered just touch screen from Ali and I broke the digitalizer so i ordered whole screen with mask after. My point is, if you don't have tools and skills (or is you first time) buy whole (touch screen + digitalizer) and replace them.
Good Luck!
Sent from my XPERIA M2 using Tapatalk
Click to expand...
Click to collapse
thanks bro :good:
Digitizer and touch screen are glued together making it impossible to remove the touch screen without breaking the digitizer that is made of thin glass.
I replaced the combo on my first Z after my car key fell off from above 15cm or so onto the screen, same story as yours! (X_X)
But:
1/ Besides the combo touch + digitizer piece you also have to buy the sticker as the actual glue around the frame will get destroyed while removing the screen.
2/ If your phone is old, you might want to buy an original battery to replace your existing battery.
3/ While reassembling the battery in the phone make sure it does not stick out from the plane surface otherwise it will push on the glue and reopen your phone. Mine had a piece of plastic on its side with harpoon like features; it looked like it had been forced into place with harpoons retaining it: crappy design, to my opinion.
Some 3M strong and thin double side tape might also be useful to keep the battery into place especially if you keep the original one which might unfortunately get a little bent while un-glueing it from the case...
In any case, you should consider its waterproof feature gone!
Good luck!
MRDK_XZ said:
hey guys
so last week something unbelievable happened to me and i say unbelievable because no one will believe what happened but thats it what can i do about it xD OK so last week my G Watch fell from my hand while wearing it and it fell off on my Xperia Z from about 20 centimeters and i didn't care that exact moment because i said like WTF it wont harm the device and after 2 minutes i opened my phone aaand its just not working the screen was broken from the area on the left of the microphone and the phone wont work but from a special small area anyways i went to my local Sony agent and he told me that the digitizer cant be replaced alone and that they will be replacing the whole LCD Display so i went to some other 3rd party repair-shops and they said the same thing and they will be replacing it with a non-original Display that cost 1/5 the price of the one that the Sony Agent offered me ( Sony Agent told me that it costs 170 Jordanian Dinars which equals 240 USD and the phone itself new unlocked costs pretty much less than that in my country ( Jordan ) )
Anyways i was wondering guys if i can replace the digitizer alone by myself (by ordering it from eBay or so and disassembling the phone and replacing it at home ) or should i replace the whole LCD Display ?
(Sorry if i had any English mistakes but i"m not a native English tongue )
Best Regards,,,
Click to expand...
Click to collapse
Just dont go for non orignal diplay you will regret it, most probably they will order a whole new CHEAP QUALITY front panel from ebay which will have poor quality of screen and all the ports. Also the power button will become a bit hard to press.
I did the same mistake and gave my phone to a local phone repair shop which was cheap but my phone went dead the very next day after it came back from repair. I agree Sony Service Centre will charge more but your phone will be in best possible condition.
My suggestion go to Sony people for repair.....
Hope it helps you
Thank you guys very much i really appreciate your help and i think i'm going to the Sony agent because i dont have that much of experience to disassemble the phone and i might get it even worst instead of fixing it :\
again thank you really much guys
Just pay attention to pay a fake screen no original one there's a few different things between the original one