Hello everyone I have a problem I do not understand how to install the kernel on my x8 naa ics with stock rom and bootloader unlocked. I have to flash the kernel of the first stock rom and install minicm9, I fear to brick the phone.
sorry for my english
Flash kernel first and at boot enter recovery and flash the ROM.
Sent from my X8 to your screen
Flash kernel, enter recovery, then flash the ROM and GApps.
Then full wipe and wipe cache and dalvik cache. Then, reboot.
Sent from my E15i using Tapatalk 2
Thanks to both! I solved
theduke95 said:
Hello everyone I have a problem I do not understand how to install the kernel on my x8 naa ics with stock rom and bootloader unlocked. I have to flash the kernel of the first stock rom and install minicm9, I fear to brick the phone.
sorry for my english
Click to expand...
Click to collapse
just for sharing..if you bricked your phone, you can flash the X8 generic.ftf kernel
you can search on google or 4shared.. i.e : X8_Shakira_E15i_2.1.1.A.0.6_generic.ftf
hope it can help
Related
hello guys im new to the forum my problem is that i followed the method to flash a kernel(1st time) and i get the nAa's screen,i also have acess to cwm,then the logo dissapears and the phone stays blanc.(the only thing i can do is pull the battery)
Question: do i have to load the custom rom,then flash the kernel,then the loaded rom?
Install rom via cwm before you must flash kernel then you must wipe cache and enjoy
Press thanks button if i help!
Sent from my E15i using XDA App
flash kernel go to cwm do full wipe wipe dalwik cache wipe cache partition instal rom and reeboot
and what i say roflmao
Sent from my E15i using XDA App
the problem is that after i flash the kernel it doesnt boot to stock rom,the screen remains blank,what should i do??
gagagio said:
the problem is that after i flash the kernel it doesnt boot to stock rom,the screen remains blank,what should i do??
Click to expand...
Click to collapse
here's a few choices
1: Read the forums
2: Sell your phone and buy a 3310
3: actually only 2 choices
and before you ask USE THE SEARCH BUTTON
Lloir said:
here's a few choices
1: Read the forums
2: Sell your phone and buy a 3310
3: actually only 2 choices
and before you ask USE THE SEARCH BUTTON
Click to expand...
Click to collapse
well i read the forums but i didnt discover the same problem as me ...so again is the stock x8 rom not supposed to work after i flash the kenrel or am i doing something wrong?(ican get to cwm).MOreover,do i have to load the custom rom file first,then flash the kernel,then flash the loaded rom?
dude, flash nAa v10. after you flash it, the kernel logo will appear followed by the battery sign.
press power button, the phone will boot and the kernel logo will appear.
you will be sent do CWM Menu.
if you have a compatible ROM for nAa kernel, do a full wipe and reboot and see if the ROM boots successfully.
if you dont have a compatible ROM, do a full wipe, install CM 2.1.8 and then reboot.
U have to unlock bootloader first before flashing kernel,
this is the step (with stock kernel and rom installed and root) :
- unlock bootloader
- flash kernel
- enter cwm
- wipe data
- install custom rom
- wipe data again
- restart system
and ur good to go
gagagio said:
hello guys im new to the forum my problem is that i followed the method to flash a kernel(1st time) and i get the nAa's screen,i also have acess to cwm,then the logo dissapears and the phone stays blanc.(the only thing i can do is pull the battery)
Question: do i have to load the custom rom,then flash the kernel,then the loaded rom?
Click to expand...
Click to collapse
You cant load stock rom with a custom kernel. Just flash GingerDx Rom and you should be fine. Flash the kernel first using the flash tool, then flash the rom using CWM and then turn on the phone
ty very much guys( especially bahmonkeys)!I should have known that
gagagio said:
ty very much guys( especially bahmonkeys)!I should have known that
Click to expand...
Click to collapse
No problem im here to help!!!
Here is a newbie guide to unlock the bootloader
http://forum.xda-developers.com/showthread.php?t=1436924&page=2
After you unlocked BL you can flash the kernel with flashtool (with the latest one)
-Don't forget to copy you're rom to SDcard!
When the nAa logo appears hit the back button and you're in cmw menu.
full wipe->instal custom rom-> reboot your phone !
first flash your kernel and then install custom rom...
i have unlocked Bootloaderand i wanna flash nAa kernel while using custom rom.will that work? or flash back to stock kernel first?
need answer as fast as possible
sorry for my bad english
Yeah it will work if the rom supports that kernel.Just wipe the dalvik cache before flashing
Sent from my Worlds using xda premium
Just transfer the nAa ROM into your SD card, flash the nAa kernel and when your phone boots up, open CWM and install the ROM.
i see now... if stuck on SE logo then i'll have to rein stall the rom again?
If You flash nAa kernel there won't be SE logo. It will be nAa logo And don't worry about stuck - there's a built-in recovery in nAa kernel, so even if You forgot to copy compatible ROM to SD card there's always an option to enable USB storage via CWM recovery. But make sure You have backup Your contacts / apps / messages etc before do anything.
oh....i never flashed kernel before...
after i unlocked bootloader then my phone hard bricked and sent to repair for 1 month+
after i get it back i checked whether the bootloader unlocked or not it surprisingly unlocked @@ and i was like
So now go ahead and install kernel and then ROM following the instructions and good luck.
Sent From My W8 Using Tapatalk
just done flashed but still able to boot it fine on gdx rom...not for nAa kernel typed lol...uhhh is ginger xperia no more updates and closed?
anthonyng said:
just done flashed but still able to boot it fine on gdx rom...not for nAa kernel typed lol...uhhh is ginger xperia no more updates and closed?
Click to expand...
Click to collapse
Yes, no more updates.
Sent From My W8 Using Tapatalk
aw...ok...thx for the news
X8 ....After unlocking bootloader it went out of SIM signal....imanage to solve this problem.
But i have a mayor problem: I`ve tried to install GingerDx, PrimeHD, MiniCM9, on Sock and Custom Kernels and it always stuks at booting.
Before unlocking bootloader stock kernel ROMs were runnig all right, even PrimeHD 7.0 with nAa 11 worked but not anymore.
Anyone knows what is happening, should i relock and unlock it again?
did you fill wipe? you need to flash kernel, install rom and full wipe
fifo171 said:
did you fill wipe? you need to flash kernel, install rom and full wipe
Click to expand...
Click to collapse
Yes...full wipe= Done...but doesn`t work after full wipping.
well are you sure you have unlocked your bootloader?
re-check with s1tool...if it's unlocked then with flashtool go back to stock rom,kernel(android 2.1) and then root it again install recovery and then first try to install some other rom for stock kernel and then install custom kernel and then custom ROM
Pay attention on your ftf kernel files...i accidently downlaoded U20 nAa kernel instead of x8 nAa kernel...and guest what-->that kernel didn't work so whatch out for which phone is ftf kernel file
i hope i helped
8cpaiw said:
well are you sure you have unlocked your bootloader?
re-check with s1tool...if it's unlocked then with flashtool go back to stock rom,kernel(android 2.1) and then root it again install recovery and then first try to install some other rom for stock kernel and then install custom kernel and then custom ROM
Pay attention on your ftf kernel files...i accidently downlaoded U20 nAa kernel instead of x8 nAa kernel...and guest what-->that kernel didn't work so whatch out for which phone is ftf kernel file
i hope i helped
Click to expand...
Click to collapse
Yes, i`ve done this!!!....The same happens to me with U20 nAa kernel....
I`ve donde exactly what you describe above but i still couldn`t install custom Roms.....pretty weird
Flesh phone with seus and do same procedures again
Sent from my E15i using xda premium
yes that pretty weird but try with SEUS/PCC and then re-do the installation of kernel and rom
.....GOOD LUCK man
8cpaiw said:
yes that pretty weird but try with SEUS/PCC and then re-do the installation of kernel and rom
.....GOOD LUCK man
Click to expand...
Click to collapse
I`ve donde this.....i don`t know how.
I will try all again.
which combination of rom and kernel did you try? try nAa kernel (not the ics one) and MiniCM7 rom
can you make a video and show us your problem?
I finally solve it!!!
Idon`t know how but i repeat the same procedure time after time and i can finally instal GingerDx v025 in Stock kernel.
Thanks to everyone that helped me!!!
At first i was using GingerDX in stock kernal
after some days i have installed ALFS kernel and faced many problems
So i came back to
X8 Shakira E15i_2.1.1.A.0.6_generic.ftf - Firmware .
I got this file at this link - http://forum.xda-developers.com/showthread.php?t=1011071&highlight=stock+rom
After flashing this with flastool i have tried to install GingerDX again
but unable to boot
I have tried primehd. Again unable to boot
Then i have flashed alfs kernel then installed these both roms. I have got bootloop on the both roms
* I have flashed the ROM with CWM
* I haven't unlocked my boot-loader
what is the problem with my device pls HELP :'(
NOW I AM IN MY STOCK ROM AGAIN..........
THANKS IN ADVANCE
You must unlock bootloader for flashing costum kernels lol
=Prime HD=8=Alfs Kernel=
fotak-x said:
Do you want full tutorial?
=Prime HD=8=Alfs Kernel=
Click to expand...
Click to collapse
No friend i am the one who installed the GINGERDX ROM 1st time.
but i think i have made a mistake in installing now
pls give me your suggestion or a full tutorial
dineshlives said:
No friend i am the one who installed the GINGERDX ROM 1st time.
but i think i have made a mistake in installing now
pls give me your suggestion or a full tutorial
Click to expand...
Click to collapse
Download rom for stock kernel
not for alfs/nAa
Or unlock bootloader and flash some costum kernel
=Prime HD=8=Alfs Kernel=
fotak-x said:
Download rom for stock kernel
not for alfs/nAa
Or unlock bootloader and flash some costum kernel
=Prime HD=8=Alfs Kernel=
Click to expand...
Click to collapse
I have downloaded roms for stock kernel friend..............
but its not booting what to do
dineshlives said:
I have downloaded roms for stock kernel friend..............
but its not booting what to do
Click to expand...
Click to collapse
Clear cache,dalvik cache and full wipe
=Prime HD=8=Alfs Kernel=
fotak-x said:
Clear cache,dalvik cache and full wipe
=Prime HD=8=Alfs Kernel=
Click to expand...
Click to collapse
Already did everything you have mentioned .........
dineshlives said:
I have downloaded roms for stock kernel friend..............
but its not booting what to do
Click to expand...
Click to collapse
Use PCC/SEUS to get back to stock , then re-root.
Flash recovery and install a ROM for STOCK KERNEL if you aren't unlocking your bootloader.
dineshlives said:
Already did everything you have mentioned .........
Click to expand...
Click to collapse
Ok,will write you full tutorial
=Prime HD=8=Alfs Kernel=
Have you root?
Do you have latest baseband xxxx15?
Sent from my X8 using xda premium
Mayank77 said:
Use PCC/SEUS to get back to stock , then re-root.
Flash recovery and install a ROM for STOCK KERNEL if you aren't unlocking your bootloader.
Click to expand...
Click to collapse
Thats what i have done
i have flashed the stock kernel with Flashtool
then rooted the device
then installed xrecovery
then flashed cwm
then flashed rom
i got bootloop.......... ?????????????
fotak-x said:
You must unlock bootloader for flashing costum kernels lol
=Prime HD=8=Alfs Kernel=
Click to expand...
Click to collapse
At first i have installed a rom without unlocking.........
but now i cant
Download rom xxxxx.zip
Must be for stock kernel
Place rom on sd card
Reboot CWM recovery/x recovery
Install zip from sdcard->find rom on sdcard
Install it
Full wipe and dalvik wipe
Reboot
If this does not help you then i am stupid
=Prime HD=8=Alfs Kernel=
dineshlives said:
Thats what i have done
i have flashed the stock kernel with Flashtool
then rooted the device
then installed xrecovery
then flashed cwm
then flashed rom
i got bootloop.......... ?????????????
Click to expand...
Click to collapse
Strange...
Are you sure the ROM is stock kernel compatible.
And first you installed xrecovery , then flashed CWM ? Why so ?
Mayank77 said:
Strange...
Are you sure the ROM is stock kernel compatible.
And first you installed xrecovery , then flashed CWM ? Why so ?
Click to expand...
Click to collapse
i have flash-able zip of cwm and installable apk for xrecovery so did it
fotak-x said:
Download rom xxxxx.zip
Must be for stock kernel
Place rom on sd card
Reboot CWM recovery/x recovery
Install zip from sdcard->find rom on sdcard
Install it
Full wipe and dalvik wipe
Reboot
If this does not help you then i am stupid
=Prime HD=8=Alfs Kernel=
Click to expand...
Click to collapse
what do you mean FULL WIPE? reset to factory?
Try flashing the stock rom .Ftf file according to the tutorial below..
http://forum.xda-developers.com/showthread.php?t=1755215
Flash .ftf file of stock rom not stock ketnel then try rooting it installing x-recovery..
Sent by the walking walkman..
currently i am using JB 4.1.2 nAa..., but now i want to go back to gingerdx v029 for stock kernel.....
i think i should flash gingerdx first and then flash stock kernel.... is this ok ??? because if i flash stock kernel first, i will not enter in CWM and my x8 will stuck on sony erricsson screen.... pls suggest
I recommended to you use gingerdx with nAa-gb kernel it has simple procedure and quit good from stock.
Just flash nAa-gb kernal and flash gingerdx rom
Officially corp via W8 using ixperia
leecorp said:
I recommended to you use gingerdx with nAa-gb kernel it has simple procedure and quit good from stock.
Just flash nAa-gb kernal and flash gingerdx rom
Officially corp via W8 using ixperia
Click to expand...
Click to collapse
thanks, but i faced battery drain problem in nAa gb kernel as compared to stock kernel, so i changed to stock kernel....
rmgaikwad said:
currently i am using JB 4.1.2 nAa..., but now i want to go back to gingerdx v029 for stock kernel.....
i think i should flash gingerdx first and then flash stock kernel.... is this ok ??? because if i flash stock kernel first, i will not enter in CWM and my x8 will stuck on sony erricsson screen.... pls suggest
Click to expand...
Click to collapse
flash naa jb again.. then go in mount and storage. and mount system and data.. and format cache data and system..then flash stock again.. cwm will work..
I suggest you to reinstall stock firmware (Kernel+Stock 2.1) using SEUS and first get a running 2.1.
then install xRecovery or CWM and flash GingerDX,(using x8toolbox) as i know you can't flash a rom first and then kernel(correct me if i'm wrong)
goldbugbee said:
I suggest you to reinstall stock firmware (Kernel+Stock 2.1) using SEUS and first get a running 2.1.
then install xRecovery or CWM and flash GingerDX,(using x8toolbox) as i know you can't flash a rom first and then kernel(correct me if i'm wrong)
Click to expand...
Click to collapse
thanks for reply..... but first i flashed the rom and then kernel.... and its working :good: