first, dont forget to give a thanks to nims11, because of him, i can publish this kernel
this kernel MAYBE only work for [ROM]Gingercruzt V2(sonygen)[Update8/11/2011]
------------------------------ Smart boot 17 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop --------------------
Download Link for OverClock kernel (883Mhz ) smart boot 17 feature Governors
"> www.mediafire.com/?05d2zri7b8a7pye <"
use CWM, and before flashing , dont forget to mount /system first and then flash this zip file
use no-Frills for OC and I/O setting
if get unstable , please set max 806 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
Download for app ( No-frills, antutu power saver, MIUIcamera, WiredTether )
">>>> www.mediafire.com/?3ne3v721u0d08wi <<<<<"
install Manually
Feature added into kernel :
1. ext4 filesystem as default ( support ext2 and ext3 too )
2. SIO, VR, NOOP, BFQ, CFQ, DEADLINE scheduler, SIO as default ( choose with no-Frillis )
3. 17 Governors ( see POLL ABOVE ) ( choose with no-Frillis )
4. Overclock upto 883Mhz
for reference about Governor and I/O scheduler
thanks to knzo
this kernel base on cm-kernel
CyanogenMod
for Overclock reference
burstlam
If you try on other rom, just please report if work
i will update feature if i can
FOR GALAXY ACE GT-S5830B ( Brazillian User ) Thanks to traduz
go to this post
OC kernel for GT-S5830B ( Brazillian User )
It will work with all cm7 roms for ace
nims11 said:
It will work with all cm7 roms for ace
Click to expand...
Click to collapse
Thanks buddy,
works for me using grif's cm, thanks people
Forget it . You made it yourself .
Sent from my GT-S5830 using XDA App
hmm i said it works for me and it does...well most of it. The phone boots and works normally but 883 is not stable for me, i get reboots after a few seconds
^Deadly_Sin^ said:
hmm i said it works for me and it does...well most of it. The phone boots and works normally but 883 is not stable for me, i get reboots after a few seconds
Click to expand...
Click to collapse
if get unstable , please set max 806 Mhz again, enjoy
Click to expand...
Click to collapse
...................................
EmoBoiix3 said:
Forget it . You made it yourself .
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
I dont understand what are you talking about ??
sorry for my english
denzel09 said:
...................................
Click to expand...
Click to collapse
Yeah i know, i just posted my personal experience. works ok for me at 844 without any problems. thanks anyway for taking time to reply
Too cool for school!
Sent from my GT-S5830 using XDA App
Using gingercruzt v2 without latest update @883 stable for now viewing youtube videos, angry birds, camera working... dont ask about governors, they are to many now loool...
Good work
Edit: First reboot 30 min after flashing kernel
ti is a stable version???
---------- Post added at 08:53 PM ---------- Previous post was at 08:49 PM ----------
<witch is the best governor for powersave and for performence
Is there an explanation to all these governors? I know theres one for some of the more commen ones like conservative, ondemand and so an, but i knever heard about:
LiLgV2
InteractiveX
SavagedZen
Scary
Lagfree
Brazilianwax
Minmax
OndemandX
Superbad
GreaseLightning.
Does anyone have some information about them and how they work?
downloadonlyaccount said:
Is there an explanation to all these governors? I know theres one for some of the more commen ones like conservative, ondemand and so an, but i knever heard about:
LiLgV2
InteractiveX
SavagedZen
Scary
Lagfree
Brazilianwax
Minmax
OndemandX
Superbad
GreaseLightning.
Does anyone have some information about them and how they work?
Click to expand...
Click to collapse
please read link on the page one, from knzo
there is a bug when i go to cm settings the performence the maw and miw frequency it dosn't show but on setcpu it works
slaid480 said:
there is a bug when i go to cm settings the performence the maw and miw frequency it dosn't show but on setcpu it works
Click to expand...
Click to collapse
No, thats bug came from cm7 rom, not the kernel
Too bad...OC at 821mhz....not what I thought at all.Not to be rude or to flame but you said about 883 mhz in the forum thread.Maybe you should just change and say that it's just another OC kernel just like ketut's.Don't lie about the frequencies they are not yet too good controlled.
If you put in a under/overvolt it may just do the good to make our Ace reach 1ghz.
slaid480 said:
there is a bug when i go to cm settings the performence the maw and miw frequency it dosn't show but on setcpu it works
Click to expand...
Click to collapse
Good choice not implement this, for all that use oc kernel.
In this way to boot phone should use always basic default frequencies, so avoiding fake boot ;-)
---------- Post added at 08:53 PM ---------- Previous post was at 08:43 PM ----------
Dekkerlion said:
Too bad...OC at 821mhz....not what I thought at all.Not to be rude or to flame but you said about 883 mhz in the forum thread.Maybe you should just change and say that it's just another OC kernel just like ketut's.Don't lie about the frequencies they are not yet too good controlled.
If you put in a under/overvolt it may just do the good to make our Ace reach 1ghz.
Click to expand...
Click to collapse
I dont think that overVolt is possible..
squadzone said:
No, thats bug came from cm7 rom, not the kernel
Click to expand...
Click to collapse
the problem is from the kernel dude,I'm running gingercruzt V2 on ketut's kernel everyting is fine on yours dosn't show min/max frequency in performence settings
Dekkerlion said:
Too bad...OC at 821mhz....not what I thought at all.Not to be rude or to flame but you said about 883 mhz in the forum thread.Maybe you should just change and say that it's just another OC kernel just like ketut's.Don't lie about the frequencies they are not yet too good controlled.
If you put in a under/overvolt it may just do the good to make our Ace reach 1ghz.
Click to expand...
Click to collapse
Can you build the kernel??
i read many reference what the best max freq for kernel, and the 883Mhz, is enough for hardware,
so this kernel not just compile, but i read every log when build this kernel and try to fix, to minimize error mod post
if you dont like, dont use it, i just want to share, what i'm doing, and if you like, just give a thanks
maybe i can give a clue, just read below
see this code
Code:
/* MSM7201A Levels 3-6 all correspond to 1.2V, level 7 corresponds to 1.325V. */
enum {
VDD_0 = 0,
VDD_1 = 1,
VDD_2 = 2,
VDD_3 = 3,
VDD_4 = 3,
VDD_5 = 3,
VDD_6 = 3,
VDD_7 = 7,
VDD_END
};
max freq use code 7, its mean corresponds to 1.325V ( max volt )
go, and build your self,
if you know the bug,
please report, not complain
every device with same type is not same on hardware, some people can boot at 883Mhz, but some people cant, and my kernel freq 883Mhz, but not default, all people will know, if freq is bigger than default its mean OC kernel
all feature is not just add but with some modification that need by device for get best result
sorry for my english
So .. I saw this thread: http://forum.xda-developers.com/showthread.php?t=1301328 ... and I wanted to test my phone ... so I downloaded app and these are the results ...
ROM: GingerDX | v019 - stock kernel
Score: 971
Something is just reallly wrong ... WUZ GOIN ON ?!
I am currently using SMARTASS Governer (it was already installed on my GDX)
How can I have better score ... I really don't like this ...
Click to expand...
Click to collapse
EDIT:
The problem was in SMARTASS governer ... now I changed my Governer to Ondemand ... my score is now 1621 ... so pretty ok ...
eventhough your problem is solved....try froyopro... and if you have unlocked bootloader then try it with alfs 09a GDX with the fixes overclock it and set IO scheduler to noop
:angel:
CnC-ROCK said:
eventhough your problem is solved....try froyopro... and if you have unlocked bootloader then try it with alfs 09a GDX with the fixes overclock it and set IO scheduler to noop
:angel:
Click to expand...
Click to collapse
how to fail?
CnC-ROCK said:
eventhough your problem is solved....try froyopro... and if you have unlocked bootloader then try it with alfs 09a GDX with the fixes overclock it and set IO scheduler to noop
:angel:
Click to expand...
Click to collapse
even tho my x8 is "11w22" ... I don't want to unlock bootloader ... there is still chance of hard brick, so not trying that ...
I like GDX .... it's pretty cool ...
Anyways, thank you for answering
@ AriaClalluCendili idiot that was a suggestion..if you dont appreciate it then shove it up your @ss
I flashed the http://forum.xda-developers.com/showthread.php?t=2159519 SuperNexus kernel which is on version 4.2.2 Jellybean, and I'm liking it ^.^
Now, I was on ICS for quite a long time (too many unstable JB roms) and of course, the kernel I should use and the i/o scheduler and cpu governor changed, as I'm on jellybean now. I was using Devil with Smartassv2 and noop on ICS and it seemed to be working great. What kernel shall i flash for the supernexus? It comes with a cyanogen mod one which i don't like, and which i/o scheduler and cpu governor shall I use? Write below, with a reason.
Thanks!
No one, seriously?
You can try this. I'm using it and it's amazing:
http://forum.xda-developers.com/showthread.php?p=34895124
Sent from my GT-I9000
GrippingSphere said:
You can try this. I'm using it and it's amazing:
http://forum.xda-developers.com/showthread.php?p=34895124
Sent from my GT-I9000
Click to expand...
Click to collapse
I'll give it a shot! Oh, by the way, what I/O scheduler are you using and what CPU governor?
Hi everyone
I was wondering what is the best cpu and i/o combo
I am currently on Cyanogenmod 10.1 RC4 by bieltv.3
Max Cpu - 902 Mhz
Min Cpu - 245 Mhz
Governor - Smartass V2
I/O - Deadline
Any opinion guys???
Cyber_Dragon001 said:
Hi everyone
I was wondering what is the best cpu and i/o combo
I am currently on Cyanogenmod 10.1 RC4 by bieltv.3
Max Cpu - 902 Mhz
Min Cpu - 245 Mhz
Governor - Smartass V2
I/O - Deadline
Any opinion guys???
Click to expand...
Click to collapse
Overclocking can fry your cpu. My governor is smartassH3, frequency 245-800 MHz and I/O is sio. for SmartassH3, flash MA6 kernel by @Mardon. Btw just curious, why are you using an old version of cm10.1? there is a final version for cm10.1. here- http://jenkins.androidarmv6.org/job/android/602/
-BRK- said:
Overclocking can fry your cpu. My governor is smartassH3, frequency 245-800 MHz and I/O is sio. for SmartassH3, flash MA6 kernel by @Mardon. Btw just curious, why are you using an old version of cm10.1? there is a final version for cm10.1. here- http://jenkins.androidarmv6.org/job/android/602/
Click to expand...
Click to collapse
Thanks for your reply -BRK-, but im comfortable with 902mhz
I'm also confused whether i'll use sio or deadline I/O
Cyber_Dragon001 said:
Thanks for your reply -BRK-, but im comfortable with 902mhz
I'm also confused whether i'll use sio or deadline I/O
Click to expand...
Click to collapse
understanding them might help you decide. have a look-
http://forum.xda-developers.com/showthread.php?t=1558153
http://forum.xda-developers.com/showpost.php?p=15735266&postcount=2
-BRK- said:
understanding them might help you decide. have a look-
http://forum.xda-developers.com/showthread.php?t=1558153
http://forum.xda-developers.com/showpost.php?p=15735266&postcount=2
Click to expand...
Click to collapse
Ohhh... srry for being noob and all. It kept on rebooting after i set the clock to 902mhz
so i stick to your advice
Max-800mhz
Min-245mhz
Gov.-SmartassV2
I/O-sio