Hi,
I really need some help as I began to get crazy about this.
I also have to mention it's my first time into Root/Mod/Custom/etc...
I Have a GT-I9000M (BELL) with Android 2.2 (version FROYO.UGJK4) Kernel 2.6.32.9
I successfully Rooted the phone with Superoneclic (Have Super User app in menu)
I Installed Rom Manager 3.0.0.0 Then authorized sudo when prompted to do it.
After that in the recovery menu of Rom Manager i've downloaded the Clockworkmod thing. (2.5.1.2)
I've tried to boot into clockworkmod but I got the standard Recovery Boot from Samsung instead. (tried to re-install rom manager to see if work but no)
I also tried to install it by using the update.zip version got here http://www.multiupload.com/5CUIK88JM0 and put it at the root of the internal sd.
Booted into the Samsung Recovery Boot and press apply Update.zip then i got
the following error:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborded
(Tried Twice still nothing new)
The goal of all this is to install Darkys_v6.0_Gingerbread_Edition_Voodoo_signed seen here: http://forum.xda-developers.com/showthread.php?t=814091
What do I do wrong???? Help me please i'm tired of the Android Froyo version from Samsung+Bell
To get ClockWorkMod compatibility, you need to use ROM Manager to start them.
This way, Voodoo recognize it's CWM recovery, intercept the call to the update.zip and install Ext4 wrappers.
If the new version is not yet available in ROM, be patient
I found the recovery app doesn't work very well. I suggest installing a kernel with CWM , that's compatible with Bell hardware? via Odin and you're good to go. From recovery menu you can do anything, including a full backup.
Supercurio I Need Help
MOD EDIT: Teranox, our forum rules specifically state that non-engish posts are allowed only if an english translation is provided as well. Please add that here, or the post will be removed
supercurio this one is for you:
What is voodoo
i'm using Rom Manager but notjing seems to work. even OCLF
it's like even if i'm rooted i can't do anything....
can't use lagfix
can't use le clockworkmod
can't use le rom de darky....
you seem enough advance in android to answer me (I saw you post & video on the Nexus S ported to SGS)
Thank you to answer me
You must be in 2e recovery for CWM
Sent from my GT-I9000 using XDA App
jsen said:
You must be in 2e recovery for CWM
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
How to get from 3 to 2e? I'm on JPO 2.2. Thanks
It is not the first time i heard about 2e recovery and cwm
thing is: i'm new to all of this. Can someone explain me what those 2 things mean and do?
Do you mean that i have everything to do it right but there is something i do wrong or forgot?
mirzahodzic said:
How to get from 3 to 2e? I'm on JPO 2.2. Thanks
Click to expand...
Click to collapse
You can find the thread called 'CFroot' at the android development section.
Download the correct version based on your current firmware and follow the instructions there. When you are done, your recovery would be 2e.
Sent from my GT-I9000 using XDA App
My only concern after had read cf-root post is that none of the zip package offer somethong for ugjk4
Teranox said:
My only concern after had read cf-root post is that none of the zip package offer somethong for ugjk4
Click to expand...
Click to collapse
Sorry dude, the only solution would be to flash to an Eclair ROM (which by default has a 2e recovery) or flash Froyo which is supported by CFroot.
I have the same issue as well. Wanted to try Darky's v6.0 rom, however stucked in getting to CWM since I'm on 3e. I did look at CFRoot, but nothing stated for JK4.
Teranox said:
Hi,
I really need some help as I began to get crazy about this.
I also have to mention it's my first time into Root/Mod/Custom/etc...
I Have a GT-I9000M (BELL) with Android 2.2 (version FROYO.UGJK4) Kernel 2.6.32.9
I successfully Rooted the phone with Superoneclic (Have Super User app in menu)
I Installed Rom Manager 3.0.0.0 Then authorized sudo when prompted to do it.
After that in the recovery menu of Rom Manager i've downloaded the Clockworkmod thing. (2.5.1.2)
I've tried to boot into clockworkmod but I got the standard Recovery Boot from Samsung instead. (tried to re-install rom manager to see if work but no)
I also tried to install it by using the update.zip version got here http://www.multiupload.com/5CUIK88JM0 and put it at the root of the internal sd.
Booted into the Samsung Recovery Boot and press apply Update.zip then i got
the following error:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborded
(Tried Twice still nothing new)
The goal of all this is to install Darkys_v6.0_Gingerbread_Edition_Voodoo_signed seen here: http://forum.xda-developers.com/showthread.php?t=814091
What do I do wrong???? Help me please i'm tired of the Android Froyo version from Samsung+Bell
Click to expand...
Click to collapse
This Might Work.... Although I Have A Different Phone (Cdma Hero), But Had A Similar Issue....
The Way I Was Able To Correct My Problem Was To Re-Install A Older Version Of "Rom Manager" (Let Me Know If You Have or Need A Older Version, I Keep'em All Now!! Lol!!
Also In "Rom Manager" I Would Try To Flash Alternate Recovery, And Then Clockwork Recovery Right After!! Make Sure It Says *Current Recovery* -And- *Latest Recovery* (Up At The Top) Then Try To Boot Into Recovery!!
PM Me If You Need More Help!!
Sent from my HERO200 using XDA App
Fresh Start
Ok well I got a good night of sleep so i'll resume where I am
I learned yesterday the following:
CMW: Clockworkmod
OCLF: One Clic Lag Fix
Now what I could try is to get back to Original Firmware of the GT-I9000M (Eclair) and from then what I've understood is that I don't need 2e recovery? Am I right?
From then I could install Darky without anything.
By going back this way will i'll stay root of will I have to root again?
If all this is right, how do i go back to eclair? can it be done via the 3e recovery menu or I have to flash? Is so I don't know anything about odin and the way it work so i'll need your help loll
rafi92 said:
Sorry dude, the only solution would be to flash to an Eclair ROM (which by default has a 2e recovery) or flash Froyo which is supported by CFroot.
Click to expand...
Click to collapse
here's what I did now:
Used Odin and Flashed my firmware to the previous one (2.1 Eclair.UGJH2)
Re-rooted
Re-installed Rom Manager
When in recovery mode i see 2e but it's the recovery from Samsung. Can't see the CWM......
Think i'm pretty close compared to yesterday from Darky 6.0 but STILL NEED CMW lolll
Fist timer Root and Flash never easy lolll
OK GUYS GOOD NEWS!!!!
Don't know what I did but CWM WORK NOW!!!!
What i've read somewhere is to never open the zip files (what i did). Got the idea of flushing them and download it again. This time it worked.
Gonna let you know when running Darky
----!!!!WORKING!!!!----
I Have Darky 6.0 Running on my Bell GT-I9000M!!!!!
First I want to thanx everyone of you who helped me out! You've been a great help.
Also I want to get the summary of my actions so Others could take advantage of this thread.
-Froyo version FROYO.UGJK4 (that is the official GT-I9000M update from BELL Mobility) was painfull to do anything so I downgraded to the eclair.UGJH2 (that is the Original Firmware from Bell)
First I've Rooted my phone using Superoneclic 1.5.5.0 that you can find here:
http://forum.xda-developers.com/showthread.php?t=803682 (enable debuging mode on the phone in Settings-applications-developpement-debuging) then plug the phone and on superoneclic press ROOT...wait and follow indications
Then went to ODIN 1.7 that you can find here
http://www.general-search.com/fileinfo/20192867
You can find the BELL 2.1 firmware
here http://www.multiupload.com/ZNBT2RY5Y0 Password is samsung-firmwares.com
In odin i've used the 512.pit file (place it in the Pit section)
Then placed the 2.1 Firmware in the PDA section.
Took care Repartition, auto-reboot, F.Reset Time check box was check.
Booted in download mode (to get it right with odin i've booted in recovery first: Vol Up+Home+Power when bootscreen appear released it. After Pressed on Reboot now and immediatly pressed Vol DOWN+HOME+Power) I GOT THE BIG YELLOW LOGO OF ANDROID and in ODIN i got the Yellow icon appeared.
At this moment I've pressed START in odin and waited. The phone was acting like when updating through Kies.
When finished I was on ECLAIR
After, I've Re-Rooted the phone with superoneclic again.
Installed Rom Manager
Downloaded the CMW (CLockworkmod) that you can find here:
http://www.multiupload.com/5CUIK88JM0 (DON'T OPEN THIS ZIP BECAUSE IT WILL BREAK THE SIGNATURE NEEDED TO VALIDATE THE FILE)
I've placed the update.zip file (CMW) at the root of the internal SD Card of the phone and rebooted into recovery mode. I went on the apply update.zip (first time it was not working, then second time it worked)
At this moment I was on Android 2.1, Rooted, and CWM Recovery was working.
To Install the Darky's v6.0 Gingerbread Edition, I've downloaded it here:
http://www.multiupload.com/YPQVS4WO9C (ONCE AGAIN DON'T OPEN THE ZIP)
I've placed it at the root of the phone (same place than update.zip)
Opened Rom Manager, and selected Install a Rom from SD Card.
I've selected the zip File and applied it.
Phone went into recovery mode by itself then started installing Darky. (took like 5 minutes but it is said to be between 5-10 minutes so...)
HURRAY I'M ON DARKY CUSTOM ROM!!!!
PS: (at boot screen GT-I9000M will change to GT-I9000), Boot Screen Animation will also change for the Nexus One Boot animation.
Took me a day and half from Noob to This but hope other Bell user (or SGS user) will find their solution here.
Now let me alone I have to play with my new toy lolll
Just got back home. I will follow your footsteps. Do you have 850 mhz band ?
You with Bell ? Any problem making and receiving calls using Darky's rom ?
Followed your steps. Now I'm running Darky's v6.0 rom.
Even if it's a Bell phone, i'm using it on rogers.
I don't have any band problems(yes i have the 850 band). In fact, since i'm on Darky it look like if the wifi and phone antenna is far better. I got reception in places i wasn't before...and can even say GPS lock my position accuratly in less than 10 sec
Everything is.better since darky run on my phone
Sent from my GT-I9000 using XDA App
Hey, can you please clarify the ODIN steps? I have the exact same problem seen here.
I've completed up until where you put the phone in download mode. I set up ODIN as described, then connected my phone via USB, then enetered Download mode - but I only get a yellow icon on the phone, not in ODIN. Have I gone wrong somewhere?
I am having an issue with Rom Manager Premium. It won't let me backup my current ROM. I select the option and it just asks me for a filename then reboots the phone into recovery mode. I check my SD card for a backup file and nothing gets created... What gives?
I've tried googling my problem, but people say to select the "Flash Alternate Recovery" option, but it's greyed out for me. And I have the latest version of Clockwork Mod 2.5.1.2
I am running an ATT Captivate SGH-I897 with the leaked 2.2 froyo rom on the Rogers network in Canada.
Dev will also not respond to my emails.
Suggestions?
I would suggest to go into recovery then advanced I believe then choose backup. Then if you go back into rom manager you will see a backup. Rom manager is just doing the same function. I usually just use the backup or restore from recovery menu anyways and I have rom manager premium also.
Sent from MY Perception 10.1 on XDA App
I think I have this same issue with my ROM Manager now backing up. I don't have the premium version. But my phone just reboots into Recovery whenever I select "Backup Current ROM" from the ROM Manager. Then when I go back to ROM Manager and select "Manage and Restore Backups", nothing happens.
So the workaround is confusing for me.
Select "Reboot into Recovery" using the ROM Manager to go into recovery mode? I have no idea where this advanced menu is either.
I'm just a newbie to ROM Manager and trying to figure out where to see my backups of my ROM....if they even exist.
did you guys follow the directions and FLASH CLOCKWORK RECOVERY from within ROM manager?
then when it boots to regular recovery did you try REINSTALL PACKAGES?
that will put you into clockwork recovery and you can do a backup from there
Pirateghost said:
did you guys follow the directions and FLASH CLOCKWORK RECOVERY from within ROM manager?
then when it boots to regular recovery did you try REINSTALL PACKAGES?
that will put you into clockwork recovery and you can do a backup from there
Click to expand...
Click to collapse
Yes I did that first step. There is a similar post with another fix and an update.zip file attached. I tried that but it froze up during the backup. I think I ran out of space on my internal SD card. I'm not sure how much space I need to do a backup but I only have about 1200MB left on my internal. I'm trying to clear things out. My external 4Gb card is nearly maxed as well. I really want to get a 32Gb external soon.
my clockwork backups are right around 750mb
Pirateghost said:
did you guys follow the directions and FLASH CLOCKWORK RECOVERY from within ROM manager?
then when it boots to regular recovery did you try REINSTALL PACKAGES?
that will put you into clockwork recovery and you can do a backup from there
Click to expand...
Click to collapse
I found out what the problem was... the leaked 2.2 froyo rom I'm running uses the <3e> recovery which I guess is not compatable with ClockworkMod. When I try to reinstall packages it gives me a verification failed message.
So I guess I need to flash a different kernel, or find another workaround. What was the update.zip workaround mentioned before? Could you please post a link?
richuwo11 said:
I found out what the problem was... the leaked 2.2 froyo rom I'm running uses the <3e> recovery which I guess is not compatable with ClockworkMod. When I try to reinstall packages it gives me a verification failed message.
So I guess I need to flash a different kernel, or find another workaround. What was the update.zip workaround mentioned before? Could you please post a link?
Click to expand...
Click to collapse
the update.zip will not work for you if you are on the leaked 2.2 with 3e recovery.
you will need to find a kernel that allows the unsigned zips or 2e recovery...they are in these forums, i will try to find a link
Hi
I rooted my Samsung Captivate by using SuperOneClick, I am I trying to install CM7.
From the Marked I installed the Rom Manager, but it fails to flash ClockworkMod Recovery Samsung Captivate (MTD). It says "Samsung Captivate (MTD) does not have an official supported ClockworkMod Recovery yet. Have you installed a ClockworkMod based Recovery manually? Yes/No"
If I choose 'Yes' and select ClockworkMod 2.x it says "Rom Manager has been set up to use your existing recovery installation."
If I choose 'No' then the message is "Sorry! Until ClockworkMod recovery is availble, ROM Manager will not work with Samsung Captivate (MTD).
I tried to install CM7 from SD Card, it just return the the Samsung reboot menu (3e). And it doesn't have an option to allow me to select "Install zip from sdcard"
HELP Please
Did you even try reading their wiki? Don't use ROM manager.... Ever.... Useless on our SGS devices.....
prbassplayer said:
Did you even try reading their wiki? Don't use ROM manager.... Ever.... Useless on our SGS devices.....
Click to expand...
Click to collapse
I follow this link to install CM7:
http://forum.xda-developers.com/showthread.php?t=978150
Can you show me the page said "Don't use ROM Manager"? so what software I should use to flash my phone?
I am new to this. Please help. Thanks
Ugh bad instruction from devs.... Just flash a kernel with CWM (Boog's, Corn or Samurai) jump on recovery and flash. Before you start make sure 1) your button combos work (if they don't or you want to get GB bootloaders) 2) have ALL the .zips that you will use in your phone before hand. If you flash one of the kernels I mentioned and you are on the wrong version of android it will NOT bootup, but will boot in Recovery (cwm). Once in CWM flash away as on instruction (if you wan't to Nandroid then you need to flash the correct rom/kernel before had)
So I'm new to all this. I already have my phone rooted, and I have CWM on my phone. I want to flash the CM 9 onto my phone. When I attempt to install from CWM, it goes to the debug screen and says "installing apk files...done." if I select reinstall packages, it aborts installation due to a signature check fail. My Captivate's system version is 2.2. Halp?
Sent from my SAMSUNG-SGH-I897 using XDA
It sounds like you don't have actual CWM, and you are trying to use stock recovery. Search the dev section for a froyo kernel that has CWM baked in. There's also one in my guide (found in my sig)
I decided to flash CM10 stable build on my AT&T captivate.....i am rooted and install rom manager and flashed CWM recovery thru ROM MANAGER and when i boot in recovery there is no option for installing zips from SD card....HELP ME PLEASE!!
PLEASE GIVE ME ANOTHER RECOVERY....:crying:
LaKsHaY1997 said:
I decided to flash CM10 stable build on my AT&T captivate.....i am rooted and install rom manager and flashed CWM recovery thru ROM MANAGER and when i boot in recovery there is no option for installing zips from SD card....HELP ME PLEASE!!
PLEASE GIVE ME ANOTHER RECOVERY....:crying:
Click to expand...
Click to collapse
you are still running stock recovery.
ROM Manager doesn't work on Captivate phone at all. You need to read stickies in the captivate forums, then use Odin or Helmdall app on your pc to flash via usb.
your first step should be to uninstall rom manager.
then read about rooting and flashing roms in the stickies in the Captivate fotums. I recommend you do this instead of someone giving you a link to single thread.
if you will flash a stock Gingerbread kk4 rom after rooting your phone, then flash the Corn 7.06 kernel, you will have the recovery menu that allows you to flash Jelly Bean roms.
reading the stickies will help you understand what you are doing, reduce the chance that you have any problems, and help you understand how to recover if you do have any problems.
my first ever flash failed and because I had read the threads, it only took a couple of minutes to recover. reading the threads before is good.
Sent from my SGH-I897 running JB CM10.1 Nightly April 8, 2013.