[Q] HAving Issues Installing RSPL/HSPL - HD7 Q&A, Help & Troubleshooting

I just recently Flashed a stock rom Onto my HD7 which took my SPL down to 2.20.2250.0.
im currently trying to install RSPL onto my device but im running into this error:
[Error Description]:
Invalid ModelID. This means that your phone not supported.
This installer supports only limited number of the phones.
SPARK, MOZART, MONDRIAN, GOLD, SCHUBERT.
If you have phone from this list, but still have this error, please contact with DFT team.
[Info]: USBWorkRSPL.cpp (235)
[Error Description]:
ModelID is 'PD291200'. Please report this info to DFT.
[Info]: USBWorkRSPL.cpp (234)
if that MID isnt supported is there another specific Rom i could flash onto my device to make this work?
Thanks muchly for all your help in advance

bump

Dousa said:
bump
Click to expand...
Click to collapse
hi
Dousa
you must be doing something wrong....
ur phone is supported and u should be able to flash/install HSPL/RSPL by Cotulla
looks like ur not using cotulla #3 HSPL...?
you need cotulla hspl in order to flash custom rom
let me know how you go
cheers
thanks button is next to qoute button !!!!!!!!!!!!!!!!!!!!!

Related

i have Problem in my htc touch

When i press the Power Phone Opens boot loader ?
Can anyone help me
ipl 2.11.1002
spl 2.26.0000
i want original room
but i cant knwo cid id ?
When i use any room A message appears ( error 270 update error )
the image file is corrupted .
i need help
In order to flash a new ROM, or even the original ROM you need to have the SPL version 2.00. Follow the guide in the ROM section of this forum for more information.
After installing the custom H-SPL, you can try installing any ROM that you like, or you could install the original one from HTC's website.
Hope you solve your problem.
i try to install the original one from HTC's website but when i give site serial number he Rejection my serial !!!!!!!!
Original ROM for your Viva...
mohamed adel said:
i try to install the original one from HTC's website but when i give site serial number he Rejection my serial !!!!!!!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=732802
thats the original ROM you need.
thanks for your help
but still not work
( error 270 update error )
the image file is corrupted .
Flash the ROM in the following order:
1- Install HSPL from here: http://forum.xda-developers.com/showthread.php?t=446446
2- Install ANY ROM as usual. It should work.
If that didn't help you then please include some more details about your problem, so we can assist you some more..
Good luck.
thanks for your help
but it dont work in my phone
The same error message
i need any Program or way to Know divce id & cid id
my phone still Power on boot loader
mohamed adel said:
thanks for your help
but it dont work in my phone
The same error message
i need any Program or way to Know divce id & cid id
my phone still Power on boot loader
Click to expand...
Click to collapse
reset device when in bootloader and try again.
shreyas18 said:
reset device when in bootloader and try again.
Click to expand...
Click to collapse
The same case
mohamed adel said:
The same case
Click to expand...
Click to collapse
Guide us through the steps you followed while installing HardSPL
any hard spl i install give me the same error
i need any way to knew my Device ID & CID ID to Download the Right room
I have tried to find out through the Mitty
my log in Manage Attachments But it does not appear
Is there any other ways
mohamed adel said:
any hard spl i install give me the same error
i need any way to knew my Device ID & CID ID to Download the Right room
I have tried to find out through the Mitty
my log in Manage Attachments But it does not appear
Is there any other ways
Click to expand...
Click to collapse
Okay, I am officially completely lost.
my phone is locked in vodafone network
if you have original room plz uplod it​
any Ideas
mohamed adel said:
any Ideas
Click to expand...
Click to collapse
Find a suitable way to unlock the device and then go for the hspl and stock rom flashing proedure...otherwise,contact the service center..thats the last hope..

[Q] Flashing CUSTOM ROM Newbie Help

Hi xda-developers community,
sr if this question is anoying but i tried to find a answer for it but the only things i was able to find out that some errors occured. But not if Succes or Failed.
I want to developer unlock my HD7 via custom rom.
Here are my System Infos:
OS Version: 7.10.8107.79
Firmware: 2250.21.51101.401
Hardware: 0002
Bootloader: 5.11.2250.0(134578)
Chip-SOC: 2.2.5.0
I have noticed that the bootloader is my main problem. I first need to downgrade. Problem no Synco Save via Zune (damaged HardDisk).
So is there any actual way to successfully downgrade my HD7 to a version to be able to install a Custom Rom?
And another question is, when really accomplished to flash a custom rom, is it possible to update via Zune or does this recover to normal rom?
Thx for ur advices to a noob with WP7.
nice regards Synergi
Damn sr pls if a moderator could be so friendly to add a Title to my Thread i forgot to add this.
thx
is the first link in my signature. wrote a tutorial.
press edit button to edit a post and it's title.
that tutorial helped me out too....just follow it and u have a unlocked phone!!!
welcome to customization
Thx for Link, but before i proceed i need a little bit more information pls.
1) For what i need to download task 00 & task 29? In ur tut they are never used again? Or did i missed anything?
2) Next is in ansar.ath.gr's tut he tells not to install after downgrade a custom rom with 5.10 Bootloader. Is this ment to if i install a stock ROM with this version that downgrage would loose because i install this bootloader again? (sr for bad english)
3) difference between RSPL & HSPL. as i read the RSPL is only active until restart and the HSPL is fixed. So with the RSPL i can try if everything works correct and the Cook it with the HSPL is this correct?
4) What kind of customs roms can i use for a HTC HD7 Europe/Austria A1???
Thx for ur advice.
sincerly Synergi
SynergiAios said:
1) For what i need to download task 00 & task 29? In ur tut they are never used again? Or did i missed anything?
Click to expand...
Click to collapse
when it comes to it... the step instructs which to use.
SynergiAios said:
2) Next is in ansar.ath.gr's tut he tells not to install after downgrade a custom rom with 5.10 Bootloader. Is this ment to if i install a stock ROM with this version that downgrage would loose because i install this bootloader again? (sr for bad english)
Click to expand...
Click to collapse
he says to not install a 5.xx ROM so you avoid putting yourself in the same position you were in before.
SynergiAios said:
3) difference between RSPL & HSPL. as i read the RSPL is only active until restart and the HSPL is fixed. So with the RSPL i can try if everything works correct and the Cook it with the HSPL is this correct?
Click to expand...
Click to collapse
answered in one of the first posts in that thread.
RSPL is temporary.
HSPL is permanent.
SynergiAios said:
4) What kind of customs roms can i use for a HTC HD7 Europe/Austria A1???
Click to expand...
Click to collapse
any Schubert Custom ROM once you are XSPL'd.
naving 4
Really Thx for ur advice i will now continue and try it out. Hopefully i will return with jailbroken Phone x)
SynergiAios said:
Really Thx for ur advice i will now continue and try it out. Hopefully i will return with jailbroken Phone x)
Click to expand...
Click to collapse
welcome, glad i could help. happy flashing.
Hello XDA Community,
i need a little bit ur help x) As usual.
I followed ansars Guide to downgrade my spl. This worked successfully. Tricolor screen says:
PD29100 MFG SS_BC (4K)
SPL-1.57.2250.0(113571)
MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)
When RomUpdateUtility finished an error occured which said that a file is curroped. But Phone rebooted successfully.
First Question was this just a tiny bug or went sth wrong?
Secound Question is: I wanted then to continue installing custom ROM. I used DFT_RSPL to get rspl to flash unsigned custom rom. DFT successfully run trough but phone didn't reboot and no RSPL still SPL. And HSPL cant continue. So my problem is i cant get RSPL to work. What am i doing wrong?
nice regards
Synergi
i hadn't ever used ansar's SLSPL before...
i suggest flashing Shipped pre-NoDo or NoDo ROM for your device.
maybe will 'fix' whatever went wrong with SLSPL.
ok thx. actually im downloading pre-nodo 1.54 Europe SPL. Sadly Rapidshare free is actually really slow 30Kb/s
When finished downloading i will try to flash this Version over Ansars and then RSPL -> to flash custom ROM.
Thx for ur advice.
SynergiAios said:
ok thx. actually im downloading pre-nodo 1.54 Europe SPL. Sadly Rapidshare free is actually really slow 30Kb/s
When finished downloading i will try to flash this Version over Ansars and then RSPL -> to flash custom ROM.
Thx for ur advice.
Click to expand...
Click to collapse
welcome, hope it solves the issue.
Success !!!
After ansars SPL i just had to flash a stock ROM. I choosed PRE-NODO 1.54 Europe and then i was able to RSPL and finally flash a Custom ROM.
Really thx for all ur help.
What im now interested in is, which is the best Custom ROM? Or better asked which is not the best, but which should I prefer?
I want as many possibilities as possible.
Actually im having DeepShine Custom ROM active but i want to look trough of the top to make a decision which i will take for further use.
Can someone maybe tell me which is his favourite and why?
And another question is -> whith the custom rom installed am i able to update via zune or shouldn't i do that? (If not how can i sync with zune and prevent zune to update my phone)
nice regards Synergi
As i now read through a little bit of the custom roms available, i think i will go with Nextgen+ It sounds like a good work for me x) If u have any other suggestions pls let me know thx
SynergiAios said:
What im now interested in is, which is the best Custom ROM? Or better asked which is not the best, but which should I prefer?
Click to expand...
Click to collapse
Custom ROM choice is all about personal preference.
the top Custom ROMs seem to be:
in alphabetic order: Deepshining, Dynamic7, intrinsic, NextGen+
As i have now the Custom ROM NexrGen+ active i have a problem again x) As usual sr XDA Community.
I cant cumunicate with my pc.
Windows 7 x64
Installed: WMDC, CoreCon2, Zune
The System recognizes that a Windows Phone 7 is plugged in but can install the drivers for it.
Any solution for this?
Nice regards
SynergiAios said:
The System recognizes that a Windows Phone 7 is plugged in but can install the drivers for it.
Any solution for this?
Click to expand...
Click to collapse
what drivers are you referring to?
Sr for my bad english. It's not actually the drivers. In German its called "Gerätesoftware" i think its device software. Windows tells me that he wasn't able to install the device windows phone 7.

[Q] HAving Issues Installing RSPL/HSPL

I just recently Flashed a stock rom Onto my HD7 which took my SPL down to 2.20.2250.0.
im currently trying to install RSPL onto my device but im running into this error:
[Error Description]:
Invalid ModelID. This means that your phone not supported.
This installer supports only limited number of the phones.
SPARK, MOZART, MONDRIAN, GOLD, SCHUBERT.
If you have phone from this list, but still have this error, please contact with DFT team.
[Info]: USBWorkRSPL.cpp (235)
[Error Description]:
ModelID is 'PD291200'. Please report this info to DFT.
[Info]: USBWorkRSPL.cpp (234)
if that MID isnt supported is there another specific Rom i could flash onto my device to make this work?
Thanks muchly for all your help in advance
The PD291200 should be a supported MID. Are you using the XSPL WF7FG1.rar file? That would be the correct file for the HD7. If so, maybe try an re download the file again, for what ever reason it may have been corrupted when you first downloaded it!
If you found this helpful please click the thank you button!
xdrc45 said:
The PD291200 should be a supported MID. Are you using the XSPL WF7FG1.rar file? That would be the correct file for the HD7. If so, maybe try an re download the file again, for what ever reason it may have been corrupted when you first downloaded it!
If you found this helpful please click the thank you button!
Click to expand...
Click to collapse
I am using the DFT_XSPL_WP7FG1.rar i cant find anything on the rar that you mentioned i gather you made a typo you wouldnt happen to have any more information on this would you. i understand that this MID should be supported by im getting this error consistently with every attempt if necessary i can post a screen shot
And if its any help as well iv listed all my phone details
PD29120 SS-BC (4k)
SPL- 2.20.2250.0(118798)
MicroP(LED) 0x07
Touch S1(v1.8,#1624)
Partition info- v211v413
OS Version 7.0.7389.0
Firmware: 2250.10.22002.841
Chip SOC Version 2.2.2.5.0
if you need any more information please dont hesitate to ask
Your device is supported in revision #3, download that file and use it. Its further up on the DFT page than rev #1 and #2 here I'll just post the link
http://htcfanboys.com/download/cotulla/?action=view&file=2942
If you found this helpful Please click the thank you button!

[Q] HTC HD7 Problem ...

I have big problem... i dont know what to do with my HD7 is stuck i guess.. i dont know. i tried to load custom rom in it and it stuck on 99% i waited for it maybe 3-4 hrs and it didnt comlete. so i unplugged it and wanted to try again. but i cant. now i cant RSPL it... this message keeps poping up when i try.
[Error Description]:
Invalid ModelID. This means that your phone not supported.
This installer supports only limited number of the phones.
SPARK, MOZART, MONDRIAN, GOLD, SCHUBERT.
If you have phone from this list, but still have this error, please contact with DFT team.
[Info]: USBWorkRSPL.cpp (235)
[Error Description]:
ModelID is 'SCHU1000'. Please report this info to DFT.
[Info]: USBWorkRSPL.cpp (234)
does anyone know how can i fix it ?
Can you give more details... What step or process you were on when it got stuck, did you downgrade spl first, flash rspl or hspl before trying to flash the rom??
The SCHU1000 is a supported MID so you shouldn't of had any problems as long as you did the steps correctly
If you found this helpful please click the thank you button!
xdrc45 said:
Can you give more details... What step or process you were on when it got stuck, did you downgrade spl first, flash rspl or hspl before trying to flash the rom??
The SCHU1000 is a supported MID so you shouldn't of had any problems as long as you did the steps correctly
If you found this helpful please click the thank you button!
Click to expand...
Click to collapse
i just used DFT RSPL program and put it in rspl,then i used custom ror,tried to upload it to phone and at 99% it got stucked. i didnt downgrade anything. can you help me ?
You have to downgrade your spl first. Can you get your device into bootloader mode, phone off, hold down the volume button, power device back on while continuing to hold down the volume down button, this will bring you into bootloader mode a tri colored screen. If you can post back the information from that screen!
If you found this helpful please click the thank you button!
xdrc45 said:
You have to downgrade your spl first. Can you get your device into bootloader mode, phone off, hold down the volume button, power device back on while continuing to hold down the volume down button, this will bring you into bootloader mode a tri colored screen. If you can post back the information from that screen!
If you found this helpful please click the thank you button!
Click to expand...
Click to collapse
ALL worked gr8!
BIG Thx to: xdrc45
Kenannp said:
ALL worked gr8!
BIG Thx to: xdrc45
Click to expand...
Click to collapse
Hey thanks man... Glad I could help you out!!!
For those wih a MID of SCHU100, your device is supported by DFT when trying to install rspl/hspl, but you have to use revision #3 here's the link. (make sure you have downgraded you spl to 3.xxx or lower before trying to install rspl/hspl or you will damage your bootloader and brick your phone)
http://htcfanboys.com/download/cotulla/?action=view&file=2942

[Q] Canada Bell HD7 flash asian rom help

Hi Folks. I will be getting a HD7 tomorrow. The HD7 is from Bell network (Canada). I would like to change the display to Chinese. I am completely new at flashing rom stuff. What file do I need and what steps should I take? Also the phone is locked to Bell, how do I get it unlocked? if I flash a Asia rom, is it unlocked automatcially. Thank you!
quekou said:
Hi Folks. I will be getting a HD7 tomorrow. The HD7 is from Bell network (Canada). I would like to change the display to Chinese. I am completely new at flashing rom stuff. What file do I need and what steps should I take? Also the phone is locked to Bell, how do I get it unlocked? if I flash a Asia rom, is it unlocked automatcially. Thank you!
Click to expand...
Click to collapse
You'll have to SIM unlock the device to get it to work on your network carrier. There are online sites that charge a small fee and will have your device SIM unlocked in a couple hours to a day. Unfortunately flashing a rom won't SIM unlock the device.
When you get the device go to - Setting - About - More - this will give you the devices Bootloader version, Firmware Revision Number, Radio version and other information such as OS version but those are the important ones you'll need.
The last 3 digits of the Firmware Revision # will give you the network carrier that it's locked to for sure. Bell Mobility = .666
Since its Bell carrier you'll need to download a Bell Mobility Pre-NoDo or NoDo rom to downgrade the SPL and use it with the goldcard method to downgrade the SPL.
To flash a rom you'll have to follow these steps -
1. Downgrade the devices SPL to at or below 3.xxx (which is required to install RSPL/HSPL)
2. Install RSPL and HSPL = Flashing XSPL
3. Flash a custom rom of your choice.
Just follow Shadow's tutorial on downgrading SPL, flashing XSPL and installing a custom rom -
http://forum.xda-developers.com/showthread.php?t=1295068
thank you very much much for the info. igo the phone today.
i managed to enter the tri color screeen and saw following info.
pd29130
spl-2.16.2250.0 (117476)
......
does it mean that my phone's spl is 2.16 and downgrade is not necessary?
thanks again .
quekou said:
thank you very much much for the info. igo the phone today.
i managed to enter the tri color screeen and saw following info.
pd29130
spl-2.16.2250.0 (117476)
......
does it mean that my phone's spl is 2.16 and downgrade is not necessary?
thanks again .
Click to expand...
Click to collapse
Luckily yes!
You just have to download and install RSPL/HSPL while the device is in bootloader mode.
Read through the DFT XSPL post carefully to avoid damage to the device.
Then download and flash the custom rom of your choice while the device is in bootloader mode
---------- Post added at 08:12 PM ---------- Previous post was at 07:43 PM ----------
quekou said:
thank you very much much for the info. igo the phone today.
i managed to enter the tri color screeen and saw following info.
pd29130
spl-2.16.2250.0 (117476)
......
does it mean that my phone's spl is 2.16 and downgrade is not necessary?
thanks again .
Click to expand...
Click to collapse
Before you start trying to flash the device... Make sure you have ActiveSync install for windows XP or windows mobile device center for Vista/7 on your PC, this allows for the proper drivers to be installed. Then you'll want to plug the device into your PC into and let the drivers install. Once that's done put the device into bootloader mode and connect it to the PC again and it will install the Qualcomm drivers. This will change the white section in bootloader mode from "Serial" to "USB" and now your ready to start flashing!
i downloaded tried to run xspl following the link but the it says my hd7 model ID is not supported. Mine is a bell hd7 ( just unlocked using codes order online) with information as
PD29130
SPL-2.16.2250.0
......
error msg when running xspl:
[Error Description]:
Invalid ModelID. This means that your phone not supported.
This installer supports only limited number of the phones.
SPARK, MOZART, MONDRIAN, GOLD, SCHUBERT.
If you have phone from this list, but still have this error, please contact with DFT team.
[Info]: USBWorkRSPL.cpp (235)
[Error Description]:
ModelID is 'PD291300'. Please report this info to DFT.
[Info]: USBWorkRSPL.cpp (234)
would you be able to shed some lights on what i should do?
well, another problem emerged. my newly bought htc hd7 keeps rebooting itself . i haven't installed anything or changed anything other than entered the unlock code. why, tks
quekou said:
well, another problem emerged. my newly bought htc hd7 keeps rebooting itself . i haven't installed anything or changed anything other than entered the unlock code. why, tks
Click to expand...
Click to collapse
Your device is supported use the Newest version Revision #3 here -
http://htcfanboys.com/download/cotulla/?action=view&file=2942
As far as the rebooting I'm not sure....that can be caused from multiple things. Hopefully after flashing the device it will take care of it.
When in bootloader mode is there any other information displayed on the screen?
Other than
PD29130
SPL 2.16.2250.0
xdrc45 said:
Your device is supported use the Newest version Revision #3 here -
http://htcfanboys.com/download/cotulla/?action=view&file=2942
As far as the rebooting I'm not sure....that can be caused from multiple things. Hopefully after flashing the device it will take care of it.
When in bootloader mode is there any other information displayed on the screen?
Other than
PD29130
SPL 2.16.2250.0
Click to expand...
Click to collapse
thank you so much for the info. i will try it when i get home. the rebooting problem seems to have lessened after sleeping on it for a night. it's strange though. anyway, i will try to flash the rom to see if it elimates the problem.
yes, on the tri color screen, it shows other lines as well which i don't have a club what they are.
i will let you know what's going to happen .tks again.
it still didn't work. phone is recognized but there isn't 2.16 spl so i choose 2.10. it didn't work, then i tried 2.56 , it still didn't work. after the sussful msg, i took out the battery and then restart the phone going into tricolor state, its still spl, not rspl. any ideas, thanks ...
i just noticed that the tricolor screen has " MNG" in the spl version line. i remember the DFT software says to make sure no MNG is displayed in the message. i guess the DFT method does not work with my HTC HD7. now what i do? thank you,
quekou said:
i just noticed that the tricolor screen has " MNG" in the spl version line. i remember the DFT software says to make sure no MNG is displayed in the message. i guess the DFT method does not work with my HTC HD7. now what i do? thank you,
Click to expand...
Click to collapse
It should still work even with the MNG.
I would try and run RSPL/HSPL again. Sometimes it doesn't work the first time. Run the RSPL wizard and select the 2.10, The device should stay in bootloader mode and say RSPL, if it doesn't change run the wizard again and it should work. Then while it's still in bootloader mode run the HSPL wizard and select the closest version to your RSPL 2.1
Once you install RSPL don't pull the battery or it will reset and go back to OSPL.

Categories

Resources