[Q] HTC HD7 Problem ... - HD7 Q&A, Help & Troubleshooting

I have big problem... i dont know what to do with my HD7 is stuck i guess.. i dont know. i tried to load custom rom in it and it stuck on 99% i waited for it maybe 3-4 hrs and it didnt comlete. so i unplugged it and wanted to try again. but i cant. now i cant RSPL it... this message keeps poping up when i try.
[Error Description]:
Invalid ModelID. This means that your phone not supported.
This installer supports only limited number of the phones.
SPARK, MOZART, MONDRIAN, GOLD, SCHUBERT.
If you have phone from this list, but still have this error, please contact with DFT team.
[Info]: USBWorkRSPL.cpp (235)
[Error Description]:
ModelID is 'SCHU1000'. Please report this info to DFT.
[Info]: USBWorkRSPL.cpp (234)
does anyone know how can i fix it ?

Can you give more details... What step or process you were on when it got stuck, did you downgrade spl first, flash rspl or hspl before trying to flash the rom??
The SCHU1000 is a supported MID so you shouldn't of had any problems as long as you did the steps correctly
If you found this helpful please click the thank you button!

xdrc45 said:
Can you give more details... What step or process you were on when it got stuck, did you downgrade spl first, flash rspl or hspl before trying to flash the rom??
The SCHU1000 is a supported MID so you shouldn't of had any problems as long as you did the steps correctly
If you found this helpful please click the thank you button!
Click to expand...
Click to collapse
i just used DFT RSPL program and put it in rspl,then i used custom ror,tried to upload it to phone and at 99% it got stucked. i didnt downgrade anything. can you help me ?

You have to downgrade your spl first. Can you get your device into bootloader mode, phone off, hold down the volume button, power device back on while continuing to hold down the volume down button, this will bring you into bootloader mode a tri colored screen. If you can post back the information from that screen!
If you found this helpful please click the thank you button!

xdrc45 said:
You have to downgrade your spl first. Can you get your device into bootloader mode, phone off, hold down the volume button, power device back on while continuing to hold down the volume down button, this will bring you into bootloader mode a tri colored screen. If you can post back the information from that screen!
If you found this helpful please click the thank you button!
Click to expand...
Click to collapse
ALL worked gr8!
BIG Thx to: xdrc45

Kenannp said:
ALL worked gr8!
BIG Thx to: xdrc45
Click to expand...
Click to collapse
Hey thanks man... Glad I could help you out!!!
For those wih a MID of SCHU100, your device is supported by DFT when trying to install rspl/hspl, but you have to use revision #3 here's the link. (make sure you have downgraded you spl to 3.xxx or lower before trying to install rspl/hspl or you will damage your bootloader and brick your phone)
http://htcfanboys.com/download/cotulla/?action=view&file=2942

Related

please help!!! my qtek 9100 stucked on bootloader screen!!

Hy guys...i have a problem, my device stucked in bootloader mode..can someone help me? please, IPL 2.18, SPL 2.18
soft reset
i tried to install another rom, but on 98% stucked...can i put wm6?
come on... help yourself, have you cid unlocked? what was the error message?...
so, i tried now to install a wm5 version, and on PC it's showing 99% and i'm still waiting about 1h, and on phone 98%
i repeat
bbobeckyj said:
have you cid unlocked? what was the error message?...
Click to expand...
Click to collapse
i read "how to cid unlock" but it is written there to copy a file on ppc memory, but i can't enter on it, only in bootloader mode
ok, you need to flash the rom that the device came with ( o2, cingular, vodaphone, tmo etc) then cid unlock
i understood that..but i don't know what rom do i need, because i have brought at second hand, from a guy, and it was in french, and i tried to install in english, but stucked on 98%
you'll have to try each french rom until one works
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
i can only see 2 french roms on the wiki, both are qtek, is that what your wizard is branded as?
also try the 'button rom' and then cid unlock
it's past my bedtime now, i'll check this in the morning. but short of holding your hand and giving a button by button tutorial, you know everything there is to know
yes it is qtek...thank you very much, i will see what i can do..i will let you know about the results
i can't download the files, because was deleted
it worked..thanks, without cid unlock, but thank you anyway for you time
now, you must cid unlock before flashing another rom
i tried to do that, and when i want to downgrade to button's 1.05 ROM it's getting stucked on 98%
now..i've made it again...i have wm5 on it..i made cid unlock, but my problem is that every time i try to install wm6 on it, it appears to me wm5...why? with each version
OK... two things - firstly, have you gone through ALL the steps in the stickied G3 unlocking thread? You mustn't miss any out, no matter how long it takes.
Secondly, what operating system is on the PC you're trying to unlock from?
One more thing - when your device starts from a soft reset, please write down and post the IPL and SPL numbers that appear on the first boot screen.
http://forum.xda-developers.com/showthread.php?t=306501
JoelC said:
OK... two things - firstly, have you gone through ALL the steps in the stickied G3 unlocking thread? You mustn't miss any out, no matter how long it takes.
Secondly, what operating system is on the PC you're trying to unlock from?
One more thing - when your device starts from a soft reset, please write down and post the IPL and SPL numbers that appear on the first boot screen.
Click to expand...
Click to collapse
which are the steps? please give it to me a link...i wrote in the first post the ipl and spl
you can type, so you must be able to read, yes?
we've both given you the link more than once AND it is in my signature in all of my posts. what more can you want?

Is This Permanently Bricked?

I just tried updating my 8125 with this update (http://forum.xda-developers.com/showthread.php?t=330080). I had my deviced unlocked by Cingular some time ago. Anyway, I get to the end, get the error message and go into the recovery tool. I have the red, green and blue screen. I run the recovery tool and the error is I need an updated RUU tool? Now my screen is stuck on the red, green and blue.
Now what?
try flashing to your latest provider rom. if you can get to that screen (bootloader) you're not bricked.
I ended up doing that and it did the trick. So I have started all over again. I can't however locate the RUU version 1.5? so that I can downgrade the rom, run CID and then flash. The link on that post does not work.
Navec245 said:
I ended up doing that and it did the trick. So I have started all over again. I can't however locate the RUU version 1.5? so that I can downgrade the rom, run CID and then flash. The link on that post does not work.
Click to expand...
Click to collapse
As long as your phone can get into bootloader mode (tricolor screen),it's not bricked.
What you mean by getting your phone unlocked by cingular,you must have gotten the SIM unlock code from the cingular,it'll only SIM unlock your phone,meaning you can use sim of any carrier with this code,but SIM unlock and CID unlock are two different things.If you want to upgrade to wm6,you are required to CID unlock your phone.
Read the unlocking guide here :-
http://forum.xda-developers.com/showthread.php?t=285435
download link for Button's Rom 1.05 :-
http://rapidshare.com/files/18066956/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Thanks. I did end up searching for that rom and found it. I followed the instructions and I now have that HTC Rom for WM5. Its really nice!
Thanks for the assist.
Navec245 said:
Thanks. I did end up searching for that rom and found it. I followed the instructions and I now have that HTC Rom for WM5. Its really nice!
Thanks for the assist.
Click to expand...
Click to collapse
Thanks !
glade you got it all worked up
Well,thats what this forum believes in "Help and Sharing"
good luck
zabardast_1 said:
Thanks !
glade you got it all worked up
Well,thats what this forum believes in "Help and Sharing"
good luck
Click to expand...
Click to collapse
True, but if you ever feel you want to show your love for our help and donate a case of beer...
Seriously though, this forum is a life-saver, so props to all who come here and do what they can to enrich the community!
akashastrega said:
True, but if you ever feel you want to show your love for our help and donate a case of beer...
Seriously though, this forum is a life-saver, so props to all who come here and do what they can to enrich the community!
Click to expand...
Click to collapse
Oh Yeeeeeeeeeeaaah !!!
You know ,you are a gem of a lady
Help!!
I know this question has come up a million times, but I have an 8125 IPL 2.25 SPL 2.25 thats stuck on the red green and blue screen tried to update to WM6 and screwed up, I know the answers are all here but if someone cold take the time to put them in a sequence for this stupid old man would be appreciated or if you want me to send you the phone and pay to have it done can do that as well.... Leave me a message
Would help if you let us know whether your wizard is G3 or G4...
I don't think I'm as lucky..
I was having issues iwth my G4 Wizard getting the TNT TouchFlo 19199 ROM to flash. It said it was OS only so I didn't do SoftSPL (possible mistake)
It locked at 99% with a communications error..
I then tried to flash with what I thought was the wizard Love rom but turned out (Definate mistake) to be the Wizard Button which it came up as successfully flashed but it froze at teh start up screen..
That is when I noticed that the IPL was 1.01 instead of 2.28.0001 like the SPL.. Now this thing won't even power on.. This device I believe then is truly bricked.
Any thoughts on what I should do other than pretend to talk to ppl on the phone?

i have Problem in my htc touch

When i press the Power Phone Opens boot loader ?
Can anyone help me
ipl 2.11.1002
spl 2.26.0000
i want original room
but i cant knwo cid id ?
When i use any room A message appears ( error 270 update error )
the image file is corrupted .
i need help
In order to flash a new ROM, or even the original ROM you need to have the SPL version 2.00. Follow the guide in the ROM section of this forum for more information.
After installing the custom H-SPL, you can try installing any ROM that you like, or you could install the original one from HTC's website.
Hope you solve your problem.
i try to install the original one from HTC's website but when i give site serial number he Rejection my serial !!!!!!!!
Original ROM for your Viva...
mohamed adel said:
i try to install the original one from HTC's website but when i give site serial number he Rejection my serial !!!!!!!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=732802
thats the original ROM you need.
thanks for your help
but still not work
( error 270 update error )
the image file is corrupted .
Flash the ROM in the following order:
1- Install HSPL from here: http://forum.xda-developers.com/showthread.php?t=446446
2- Install ANY ROM as usual. It should work.
If that didn't help you then please include some more details about your problem, so we can assist you some more..
Good luck.
thanks for your help
but it dont work in my phone
The same error message
i need any Program or way to Know divce id & cid id
my phone still Power on boot loader
mohamed adel said:
thanks for your help
but it dont work in my phone
The same error message
i need any Program or way to Know divce id & cid id
my phone still Power on boot loader
Click to expand...
Click to collapse
reset device when in bootloader and try again.
shreyas18 said:
reset device when in bootloader and try again.
Click to expand...
Click to collapse
The same case
mohamed adel said:
The same case
Click to expand...
Click to collapse
Guide us through the steps you followed while installing HardSPL
any hard spl i install give me the same error
i need any way to knew my Device ID & CID ID to Download the Right room
I have tried to find out through the Mitty
my log in Manage Attachments But it does not appear
Is there any other ways
mohamed adel said:
any hard spl i install give me the same error
i need any way to knew my Device ID & CID ID to Download the Right room
I have tried to find out through the Mitty
my log in Manage Attachments But it does not appear
Is there any other ways
Click to expand...
Click to collapse
Okay, I am officially completely lost.
my phone is locked in vodafone network
if you have original room plz uplod it​
any Ideas
mohamed adel said:
any Ideas
Click to expand...
Click to collapse
Find a suitable way to unlock the device and then go for the hspl and stock rom flashing proedure...otherwise,contact the service center..thats the last hope..

[Q] HAving Issues Installing RSPL/HSPL

I just recently Flashed a stock rom Onto my HD7 which took my SPL down to 2.20.2250.0.
im currently trying to install RSPL onto my device but im running into this error:
[Error Description]:
Invalid ModelID. This means that your phone not supported.
This installer supports only limited number of the phones.
SPARK, MOZART, MONDRIAN, GOLD, SCHUBERT.
If you have phone from this list, but still have this error, please contact with DFT team.
[Info]: USBWorkRSPL.cpp (235)
[Error Description]:
ModelID is 'PD291200'. Please report this info to DFT.
[Info]: USBWorkRSPL.cpp (234)
if that MID isnt supported is there another specific Rom i could flash onto my device to make this work?
Thanks muchly for all your help in advance
bump
Dousa said:
bump
Click to expand...
Click to collapse
hi
Dousa
you must be doing something wrong....
ur phone is supported and u should be able to flash/install HSPL/RSPL by Cotulla
looks like ur not using cotulla #3 HSPL...?
you need cotulla hspl in order to flash custom rom
let me know how you go
cheers
thanks button is next to qoute button !!!!!!!!!!!!!!!!!!!!!

[Q] Canada Bell HD7 flash asian rom help

Hi Folks. I will be getting a HD7 tomorrow. The HD7 is from Bell network (Canada). I would like to change the display to Chinese. I am completely new at flashing rom stuff. What file do I need and what steps should I take? Also the phone is locked to Bell, how do I get it unlocked? if I flash a Asia rom, is it unlocked automatcially. Thank you!
quekou said:
Hi Folks. I will be getting a HD7 tomorrow. The HD7 is from Bell network (Canada). I would like to change the display to Chinese. I am completely new at flashing rom stuff. What file do I need and what steps should I take? Also the phone is locked to Bell, how do I get it unlocked? if I flash a Asia rom, is it unlocked automatcially. Thank you!
Click to expand...
Click to collapse
You'll have to SIM unlock the device to get it to work on your network carrier. There are online sites that charge a small fee and will have your device SIM unlocked in a couple hours to a day. Unfortunately flashing a rom won't SIM unlock the device.
When you get the device go to - Setting - About - More - this will give you the devices Bootloader version, Firmware Revision Number, Radio version and other information such as OS version but those are the important ones you'll need.
The last 3 digits of the Firmware Revision # will give you the network carrier that it's locked to for sure. Bell Mobility = .666
Since its Bell carrier you'll need to download a Bell Mobility Pre-NoDo or NoDo rom to downgrade the SPL and use it with the goldcard method to downgrade the SPL.
To flash a rom you'll have to follow these steps -
1. Downgrade the devices SPL to at or below 3.xxx (which is required to install RSPL/HSPL)
2. Install RSPL and HSPL = Flashing XSPL
3. Flash a custom rom of your choice.
Just follow Shadow's tutorial on downgrading SPL, flashing XSPL and installing a custom rom -
http://forum.xda-developers.com/showthread.php?t=1295068
thank you very much much for the info. igo the phone today.
i managed to enter the tri color screeen and saw following info.
pd29130
spl-2.16.2250.0 (117476)
......
does it mean that my phone's spl is 2.16 and downgrade is not necessary?
thanks again .
quekou said:
thank you very much much for the info. igo the phone today.
i managed to enter the tri color screeen and saw following info.
pd29130
spl-2.16.2250.0 (117476)
......
does it mean that my phone's spl is 2.16 and downgrade is not necessary?
thanks again .
Click to expand...
Click to collapse
Luckily yes!
You just have to download and install RSPL/HSPL while the device is in bootloader mode.
Read through the DFT XSPL post carefully to avoid damage to the device.
Then download and flash the custom rom of your choice while the device is in bootloader mode
---------- Post added at 08:12 PM ---------- Previous post was at 07:43 PM ----------
quekou said:
thank you very much much for the info. igo the phone today.
i managed to enter the tri color screeen and saw following info.
pd29130
spl-2.16.2250.0 (117476)
......
does it mean that my phone's spl is 2.16 and downgrade is not necessary?
thanks again .
Click to expand...
Click to collapse
Before you start trying to flash the device... Make sure you have ActiveSync install for windows XP or windows mobile device center for Vista/7 on your PC, this allows for the proper drivers to be installed. Then you'll want to plug the device into your PC into and let the drivers install. Once that's done put the device into bootloader mode and connect it to the PC again and it will install the Qualcomm drivers. This will change the white section in bootloader mode from "Serial" to "USB" and now your ready to start flashing!
i downloaded tried to run xspl following the link but the it says my hd7 model ID is not supported. Mine is a bell hd7 ( just unlocked using codes order online) with information as
PD29130
SPL-2.16.2250.0
......
error msg when running xspl:
[Error Description]:
Invalid ModelID. This means that your phone not supported.
This installer supports only limited number of the phones.
SPARK, MOZART, MONDRIAN, GOLD, SCHUBERT.
If you have phone from this list, but still have this error, please contact with DFT team.
[Info]: USBWorkRSPL.cpp (235)
[Error Description]:
ModelID is 'PD291300'. Please report this info to DFT.
[Info]: USBWorkRSPL.cpp (234)
would you be able to shed some lights on what i should do?
well, another problem emerged. my newly bought htc hd7 keeps rebooting itself . i haven't installed anything or changed anything other than entered the unlock code. why, tks
quekou said:
well, another problem emerged. my newly bought htc hd7 keeps rebooting itself . i haven't installed anything or changed anything other than entered the unlock code. why, tks
Click to expand...
Click to collapse
Your device is supported use the Newest version Revision #3 here -
http://htcfanboys.com/download/cotulla/?action=view&file=2942
As far as the rebooting I'm not sure....that can be caused from multiple things. Hopefully after flashing the device it will take care of it.
When in bootloader mode is there any other information displayed on the screen?
Other than
PD29130
SPL 2.16.2250.0
xdrc45 said:
Your device is supported use the Newest version Revision #3 here -
http://htcfanboys.com/download/cotulla/?action=view&file=2942
As far as the rebooting I'm not sure....that can be caused from multiple things. Hopefully after flashing the device it will take care of it.
When in bootloader mode is there any other information displayed on the screen?
Other than
PD29130
SPL 2.16.2250.0
Click to expand...
Click to collapse
thank you so much for the info. i will try it when i get home. the rebooting problem seems to have lessened after sleeping on it for a night. it's strange though. anyway, i will try to flash the rom to see if it elimates the problem.
yes, on the tri color screen, it shows other lines as well which i don't have a club what they are.
i will let you know what's going to happen .tks again.
it still didn't work. phone is recognized but there isn't 2.16 spl so i choose 2.10. it didn't work, then i tried 2.56 , it still didn't work. after the sussful msg, i took out the battery and then restart the phone going into tricolor state, its still spl, not rspl. any ideas, thanks ...
i just noticed that the tricolor screen has " MNG" in the spl version line. i remember the DFT software says to make sure no MNG is displayed in the message. i guess the DFT method does not work with my HTC HD7. now what i do? thank you,
quekou said:
i just noticed that the tricolor screen has " MNG" in the spl version line. i remember the DFT software says to make sure no MNG is displayed in the message. i guess the DFT method does not work with my HTC HD7. now what i do? thank you,
Click to expand...
Click to collapse
It should still work even with the MNG.
I would try and run RSPL/HSPL again. Sometimes it doesn't work the first time. Run the RSPL wizard and select the 2.10, The device should stay in bootloader mode and say RSPL, if it doesn't change run the wizard again and it should work. Then while it's still in bootloader mode run the HSPL wizard and select the closest version to your RSPL 2.1
Once you install RSPL don't pull the battery or it will reset and go back to OSPL.

Categories

Resources