Hi,
I changed the font on my phone but then all of a sudden it wouldn't load as it would just get stuck at the galaxy s splash screen.
I am now re flashing it in odin to the n00b friendly stock jvt firmware although it's stuck at setting pit file for the past 4 hours.
If anyone can help please do as I promised my Dad I'd upgrade his phone to ICS but I haven't so I'm felling pretty down now. :crying:
This is the message;
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9000XXJVT_CL617736_REV03_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVT_REV_00_CL1064602.tar.md5 is valid.
<OSM> GT-I9000-CSC-HOME-MULTI-OXAJVT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
Regards,
i having that problem also... solved after i try to tilt the USB cable.
Just remove the phone from usb and re try, when i used the odin i almost tried for 20times to successfully flash it.
Ahh, had your problem to, try leaving re-partition off, maybe that works
Sent from my GT-I9000 using xda premium
Hi,
I can't turn of re-partition aas I'm flashing this Rom
forum.xda-developers.com/showthread.php?t=1583026
And it say's not to uncheck re-partition
Odin sometimes act like that, remove the usb cable then try again, it should work.
remove ur phone... And then remove the battery.. and then go in download mode and plug it again... Don't check the repartition..
Sent from my SGS-GTI9000 using Tapatalk 2
try to use another USB cable or change the USB port..
I have the same problem
I have the same problem
What I already tried
I have it on another usb port (nothing):crying:
And other PC :crying:
And others type ODIN :crying:
And 5 other pit files :crying:
And other firmware Roms from XDA And Sammobile :crying:
It remains no pit file partitioning or no re-partitioning :crying:
Related
I succesfully flashed Fusion V2 in my GNote. I've being trying to flash thru Odin a Stock Rom since I just prefer Stock. I flashed a GB Kernel, I think its called Abyss (sorry If I Mispell). And then try to flash the Stock ICS Rom. The process stops at:
FactoryFS.img
Nand write Start.
It stops right there.
What should I do????
Sorry for my english.
kindly post your full error log here, whether it was stopped with msg successfull0/failed 1 Or it was stuck?
dr.ketan said:
kindly post your full error log here, whether it was stopped with msg successfull0/failed 1 Or it was stuck?
Click to expand...
Click to collapse
The thing is that Odin doesnt show any error, it just stops. I waited 30mins and nothing so I unplugged the phone. The phone didnt show a download bar. The phone was in download mode.
That is really bad sign
Any way download any Stock GB ROM
and flash again with pit file
If your device is 16GB model (not 32GB) then use this pit with re partition option enable on PC Odin
http://d-h.st/FVh
dr.ketan said:
That is really bad sign
Any way download any Stock GB ROM
and flash again with pit file
If your device is 16GB model (not 32GB) then use this pit with re partition option enable on PC Odin
http://d-h.st/FVh
Click to expand...
Click to collapse
Yes is a 16gb model. Where can I get the Pit file?
I have pasted link in my previous post, And you have quoted too.
darielsantana said:
Yes is a 16gb model. Where can I get the Pit file?
Click to expand...
Click to collapse
Perfect just saw the download link.
Ill try that once I get home.
Btw your posts are great. Thanks for them.
dr.ketan said:
I have pasted link in my previous post, And you have quoted too.
Click to expand...
Click to collapse
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
Im trying to flash the GB Rom with the Pit file you gave me and thats the msg I get. Is this process really slow or am I having trouble?
I have around 10mins waiting and nothing else is happening
darielsantana said:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
Im trying to flash the GB Rom with the Pit file you gave me and thats the msg I get. Is this process really slow or am I having trouble?
I have around 10mins waiting and nothing else is happening
Click to expand...
Click to collapse
Got this error!!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
It appears ODIN is struggling to find your device, Do you have the correct drivers installed ? Have you exited kies (including system tray?) Have you tried alternative USB ports ? Preferably direct into the MoBo (back of tower?) What shows up in ODIN when you connect your phone in download mode ?
azzledazzle said:
It appears ODIN is struggling to find your device, Do you have the correct drivers installed ? Have you exited kies (including system tray?) Have you tried alternative USB ports ? Preferably direct into the MoBo (back of tower?) What shows up in ODIN when you connect your phone in download mode ?
Click to expand...
Click to collapse
Now it connected but when trying to Flash Stock GB it shows this:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000OXXKK6_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> factoryfs.img
whats happening? why cant i flash the rom??
How log has it been stuck like that for ??
Usually sticking at factoryfs.img is not a good sign, You can use the unbrick method to repartition the phone and get you up and running again, However you will lose some space (2-3gb)
Here's the link http://forum.xda-developers.com/showthread.php?t=1667886
I would wait for some confirmation from someone else firstly, Someone like the god himself - Dr.Ketan
Ive never bricked my note so luckily ive never had to try that method ^^
azzledazzle said:
How log has it been stuck like that for ??
Usually sticking at factoryfs.img is not a good sign, You can use the unbrick method to repartition the phone and get you up and running again, However you will lose some space (2-3gb)
Here's the link http://forum.xda-developers.com/showthread.php?t=1667886
I would wait for some confirmation from someone else firstly, Someone like the god himself - Dr.Ketan
Ive never bricked my note so luckily ive never had to try that method ^^
Click to expand...
Click to collapse
Yeah I followed that method but only can flash Custom Roms after the repartition. I dont know what to do :S. I've being waiting his reply.
Why can you only flash custom ROMs ? Cant you flash a stock one via ODIN but include the patched .pit file ?
Sorry im of no use
azzledazzle said:
Why can you only flash custom ROMs ? Cant you flash a stock one via ODIN but include the patched .pit file ?
Sorry im of no use
Click to expand...
Click to collapse
I cant flash stock rom with pit file given :s
Its ok at least someone is trying to help
Do you have warranty ?? You could flash a stock ROM without pit, which will put your phone back into the bricked state, Then send it off for warranty ?
azzledazzle said:
Do you have warranty ?? You could flash a stock ROM without pit, which will put your phone back into the bricked state, Then send it off for warranty ?
Click to expand...
Click to collapse
no warranty
Why dont you have warranty ? All Samsungs come with at least 12-24 months manufacturer warranty.
azzledazzle said:
Why dont you have warranty ? All Samsungs come with at least 12-24 months manufacturer warranty.
Click to expand...
Click to collapse
well i might have but I bought in Ebay. And live at Dominican Republic. There is no Samsung representative over here. And I dont have a Bill.
Well hold on for some other opinions, But if you dont get a solution then consider sending it to samsung, They should repair it, However you might have to pay postage charges, Give them a call first and blame it on a OTA / Kies update
Hello,
I bought s5830i and i did'n know about this 'i' so I try to install CMW5 for S5830 without 'i' and now when i'm trying turn on phone hanging on boot screen. Before I installed cmw5 i don't turn on "debbuging usb" option. And now when I want install branding soft via Odin it don't see my phone. I of course tunr on "download mode" using 'volume down'+'volume up'+'power' combination. What can i do whit this problem? I tried changing ports and computers. I think that problems is not chacked "debugging usb" but I dont know how i can check it now?
tamburyniarz said:
Hello,
I bought s5830i and i did'n know about this 'i' so I try to install CMW5 for S5830 without 'i' and now when i'm trying turn on phone hanging on boot screen. Before I installed cmw5 i don't turn on "debbuging usb" option. And now when I want install branding soft via Odin it don't see my phone. I of course tunr on "download mode" using 'volume down'+'volume up'+'power' combination. What can i do whit this problem? I tried changing ports and computers. I think that problems is not chacked "debugging usb" but I dont know how i can check it now?
Click to expand...
Click to collapse
Hello. Sorry for my english. You can try this guide http://forum.xda-developers.com/showthread.php?t=1551156
Sure you need Samsung Usb Driver or install Kies in your pc (kies installs drivers too).
good luck.
Now, odin see my device. I unistalled all drivers and whole Kies, and installed agan. But now I've another problem. When I trying flash Oden failed:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm using "Odin3_v1.84", PIT file : "cooperve_0623.pit" and ROM: "S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar.md5" from samfirmware.com
I don't know what i'm doing wrong. I wanted add picture but i can't - I don't have 10 posts...
I used this ODIN 1.87 is preconfigured for 5830i you dont have to configure, only select files. The .pit file i used is include. http://forum.xda-developers.com/attachment.php?attachmentid=1058320&d=1336911330
1st. Turn on phone in download mode.
2nd. Press volumen up in phone to continue.
3rd. Plug usb in pc
4rd Open Odin.
Sorry for my english, good luck
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now it's this. Maybe other soft,but I dont know which one?
@edit
One more question: If i have one-file om i put it in PDA box?
To FirmWare Work in ODIN, is needed split file in parts, The ODIN only flashes BOOT PHONE PDA and CSC parts!
Docky73 builded one utility for CygWin and linux split the file in parts.http://forum.xda-developers.com/showthread.php?t=1611225
I'm do it! It's weird, but I only used other usb cable. When I do it all was fin. Thankfor helping. It was very helpfull.
Still not working
I have try the above method and i m still unable to flash this galaxy ace s5830i.
find attached the screenshoot that i took.
really need help to update this phone
thank in advance
Have you closed kies. . If kies running background your flashing will never get success. .May be silly but check once
Sent from galaxy ace running S3 beta 3.1 evolution
Kies is not installed I have remove it to prevent this issue
Sent from my GT-N7000 using xda app-developers app
Hi everyone, sorry if this is the wrong place for this post, mods pls move it to the right forum.
I have a non-rooted, non-operator free Samsung Galaxy Note with Gingerbread and I want to root it, set it operator free and flash ICS.
I tried to flash a ROM via Odin (N7000XXLPY_N7000OXALPY_DBT), followed the steps (open Odin, select the md5 file @ PDA, startup the phone on download mode, connect the phone to pc, now Odin recognizes it and shows the yellow case, then I press start) but at a certain point it just stops working and I dunno what to do, its frustrating...
Here's the Odin's Console log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
It just stops at this point and don't do nothing... What can I do?
kelomancer said:
Hi everyone, sorry if this is the wrong place for this post, mods pls move it to the right forum.
I have a non-rooted, non-operator free Samsung Galaxy Note with Gingerbread and I want to root it, set it operator free and flash ICS.
I tried to flash a ROM via Odin (N7000XXLPY_N7000OXALPY_DBT), followed the steps (open Odin, select the md5 file @ PDA, startup the phone on download mode, connect the phone to pc, now Odin recognizes it and shows the yellow case, then I press start) but at a certain point it just stops working and I dunno what to do, its frustrating...
Here's the Odin's Console log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
It just stops at this point and don't do nothing... What can I do?
Click to expand...
Click to collapse
Usually ODIN takes a lil long to flash a rom.So give it a good 10mins time and see it comoletes the installation....
Or you may use the new ODIN by grgsiocl.It shows the remaining time left to finish flashing.Its there in themes and apps section.
Sent from my GT-N7000 using xda app-developers app
sometimes 30 or more minutes.
Usually it stops there either thought corrupt download of rom, redownload it try again.
Or because you have bricked it "op op" emmc "style" way.
If you did not root phone, or put different kernels on, then dont do anything and contact entropy, he is looking for a case where without this the phone was superbricked.
Sent from my GT-N7000 using Tapatalk 2
You may not have all the drivers from Samsung? Download Kies, run it. Then turn off Kies, antivirus and firewall. Commissioning Odin as administrator.
Wait for atleast 20 mins approx to get the stage completed or throw out to samsung service center to get it done.
Swyped From My Juicy Flavoured AOKP JB.
Hello,
I have I rare problem. I tried to flash a new ROM and it failed, so now the phone is stuck on the boot image. Ok, usualy I would have solved this with CMW 3 button recovery combination, but my phones Home button is broken so I cannot acces it, but I made the USB Jig and can acces download mode.
My question is how do I unbrick my phone?
What I tried: Using SDK tools to reboot the phone in recovery with ADB, no succes. Sdk doesnt see my device.
Something called Fastboot, but from what I read Samsung doesn't have such a feature for the phone to enable.
Thank you.
I had the same problem a couple of time ago, but all 3 buttons were defect (see my signature ).
What I always did:
when you can get in download mode then restock via odin and phone will boot again.
Here is slappys rescue kit what i always use when i have to restock.
Unzip it and flash the Rom via Odin. There is also a txt file with a guide included.
http://forum.xda-developers.com/showpost.php?p=29114573&postcount=2
With this flashed rom you will have in the power down menue the funktion: back to recovery or back to download. So first time go back to download mode or use usb jig again and then flash the included root kernel.
Then flash the rom of your choice.
If you would go to jelly bean i would recommend to use Mackays 1.3.0. first. Because you have to flash JB twice or even 3 times and after the first flash of this Mackay it goes automatically back in recovery mode.
Link to older Mackay Roms:
http://www.xdafileserver.nl/index.php?dir=Samsung/Galaxy+S/MackayROM/JB41/old
After flashing this you could go to google play and download an app for softkeys for example softkeys for root users.
After that and if you want or like you could flash also a JB rom with included virtual softkeys, like for example SLIM. You have to enable the navigation bar in settings but after that you can use your phone quite normal.
Hope this helps and wish you a good success!
How long should it last to restock with odin?I'm waiting for about 30m and nothing. Still says Do not turn of target! No Loading bar n phone or Odin showing any progress. What is wrong?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> EZbase-PHONE-XXJVO.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
Solved it. I was using the USB port in front of the Desktop unit and i guess it doesn't have enough voltage. Worked when i switched to the back USB port. Thanks a lot man!! You saved my phone !
rahbert said:
How long should it last to restock with odin?I'm waiting for about 30m and nothing. Still says Do not turn of target! No Loading bar n phone or Odin showing any progress. What is wrong?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> EZbase-PHONE-XXJVO.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
Click to expand...
Click to collapse
rahbert said:
Solved it. I was using the USB port in front of the Desktop unit and i guess it doesn't have enough voltage. Worked when i switched to the back USB port. Thanks a lot man!! You saved my phone !
Click to expand...
Click to collapse
Great and Strike . Glad i could help and you can use your phone again!
Have fun with it and enjoy...perhaps JB?!
hi i think my phone was bricked
the phone can not started anymore logo samsung then logo orange (france) again and again
i have no access to the recovery only the download mode the phone is recognized by the pc
i try to flash a stock rom via odin but it stuck at the step initialization
i try two different cable different odin different stock rom
i try t flash a recovery
but always them result can you help me please
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G800FXXU1ANL1_G800FFTM1ANL2_G800FXXU1AOC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
I have the same issue with my wife's phone. Yesterday all of a sudden the phone rebooted and now we can't pass the Samsung logo.
I can't boot into recovery, but i can boot into Download mode. The problem is I can't use ODIN to re flash the phone or do something since it gets stuck in "Initialzation".
Hi iam still at the same issue
I have test many solution but nothing work for my phone
Maybe you will have more chance
Same to problem G800H dualism. How to fix it . when I cunnect my pc with USB then show zelus driver.