hi i think my phone was bricked
the phone can not started anymore logo samsung then logo orange (france) again and again
i have no access to the recovery only the download mode the phone is recognized by the pc
i try to flash a stock rom via odin but it stuck at the step initialization
i try two different cable different odin different stock rom
i try t flash a recovery
but always them result can you help me please
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G800FXXU1ANL1_G800FFTM1ANL2_G800FXXU1AOC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
I have the same issue with my wife's phone. Yesterday all of a sudden the phone rebooted and now we can't pass the Samsung logo.
I can't boot into recovery, but i can boot into Download mode. The problem is I can't use ODIN to re flash the phone or do something since it gets stuck in "Initialzation".
Hi iam still at the same issue
I have test many solution but nothing work for my phone
Maybe you will have more chance
Same to problem G800H dualism. How to fix it . when I cunnect my pc with USB then show zelus driver.
Related
Hi so about a week ago I flashed the 2.3.3 gingerbread bootloaders and stock gingerbread rom using this method: http://forum.xda-developers.com/showthread.php?t=1045734
Then I flashed GR-11, then Continuum v5.3, and then Perception II Beta 3. Then I decided to flash back to stock 2.1 using Odin one click. But now I want to flash the 2.3.3 bootloaders and gingerbread stock rom again by using the same method (http://forum.xda-developers.com/showthread.php?t=1045734), but now everytime i try to reflash them, it fails.
this is what odin says specifically: <ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_XWJVB_Sbl.tar.md5 is valid.
<OSM> PHONE_XXJVK.tar.md5 is valid.
<OSM> CSC_NEE_JV3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone help? I tried searching for this but could not find it so sorry if there is another thread about this :\
make sure "repartition" is selected" ?
Yes I did that I followed the directions from the link exactly. Am i supposed to pull out the sim card or something?
Just wondering - did you have the phone in download mode?
When i had it plugged into odin, yeah. My phone doesnt have the 3 button fix so i had to use adb reboot download and then i disconnected it and opened odin and plugged it back in. Should i just use my jig to put it into download mode instead of using adb because that could interrupt it or something?
Switch usb ports on your pc, make sure it's on the back connected to the motherboard, not a front port our a hub.
I tried that too with no luck :'(
Hi,
I changed the font on my phone but then all of a sudden it wouldn't load as it would just get stuck at the galaxy s splash screen.
I am now re flashing it in odin to the n00b friendly stock jvt firmware although it's stuck at setting pit file for the past 4 hours.
If anyone can help please do as I promised my Dad I'd upgrade his phone to ICS but I haven't so I'm felling pretty down now. :crying:
This is the message;
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9000XXJVT_CL617736_REV03_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVT_REV_00_CL1064602.tar.md5 is valid.
<OSM> GT-I9000-CSC-HOME-MULTI-OXAJVT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
Regards,
i having that problem also... solved after i try to tilt the USB cable.
Just remove the phone from usb and re try, when i used the odin i almost tried for 20times to successfully flash it.
Ahh, had your problem to, try leaving re-partition off, maybe that works
Sent from my GT-I9000 using xda premium
Hi,
I can't turn of re-partition aas I'm flashing this Rom
forum.xda-developers.com/showthread.php?t=1583026
And it say's not to uncheck re-partition
Odin sometimes act like that, remove the usb cable then try again, it should work.
remove ur phone... And then remove the battery.. and then go in download mode and plug it again... Don't check the repartition..
Sent from my SGS-GTI9000 using Tapatalk 2
try to use another USB cable or change the USB port..
I have the same problem
I have the same problem
What I already tried
I have it on another usb port (nothing):crying:
And other PC :crying:
And others type ODIN :crying:
And 5 other pit files :crying:
And other firmware Roms from XDA And Sammobile :crying:
It remains no pit file partitioning or no re-partitioning :crying:
Hello,
I have I rare problem. I tried to flash a new ROM and it failed, so now the phone is stuck on the boot image. Ok, usualy I would have solved this with CMW 3 button recovery combination, but my phones Home button is broken so I cannot acces it, but I made the USB Jig and can acces download mode.
My question is how do I unbrick my phone?
What I tried: Using SDK tools to reboot the phone in recovery with ADB, no succes. Sdk doesnt see my device.
Something called Fastboot, but from what I read Samsung doesn't have such a feature for the phone to enable.
Thank you.
I had the same problem a couple of time ago, but all 3 buttons were defect (see my signature ).
What I always did:
when you can get in download mode then restock via odin and phone will boot again.
Here is slappys rescue kit what i always use when i have to restock.
Unzip it and flash the Rom via Odin. There is also a txt file with a guide included.
http://forum.xda-developers.com/showpost.php?p=29114573&postcount=2
With this flashed rom you will have in the power down menue the funktion: back to recovery or back to download. So first time go back to download mode or use usb jig again and then flash the included root kernel.
Then flash the rom of your choice.
If you would go to jelly bean i would recommend to use Mackays 1.3.0. first. Because you have to flash JB twice or even 3 times and after the first flash of this Mackay it goes automatically back in recovery mode.
Link to older Mackay Roms:
http://www.xdafileserver.nl/index.php?dir=Samsung/Galaxy+S/MackayROM/JB41/old
After flashing this you could go to google play and download an app for softkeys for example softkeys for root users.
After that and if you want or like you could flash also a JB rom with included virtual softkeys, like for example SLIM. You have to enable the navigation bar in settings but after that you can use your phone quite normal.
Hope this helps and wish you a good success!
How long should it last to restock with odin?I'm waiting for about 30m and nothing. Still says Do not turn of target! No Loading bar n phone or Odin showing any progress. What is wrong?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> EZbase-PHONE-XXJVO.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
Solved it. I was using the USB port in front of the Desktop unit and i guess it doesn't have enough voltage. Worked when i switched to the back USB port. Thanks a lot man!! You saved my phone !
rahbert said:
How long should it last to restock with odin?I'm waiting for about 30m and nothing. Still says Do not turn of target! No Loading bar n phone or Odin showing any progress. What is wrong?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> EZbase-PHONE-XXJVO.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
Click to expand...
Click to collapse
rahbert said:
Solved it. I was using the USB port in front of the Desktop unit and i guess it doesn't have enough voltage. Worked when i switched to the back USB port. Thanks a lot man!! You saved my phone !
Click to expand...
Click to collapse
Great and Strike . Glad i could help and you can use your phone again!
Have fun with it and enjoy...perhaps JB?!
Hello,
My friend gave me a phone to wipe.
The problem is:
The Pattern is locked due to many attempts. (To many attempts for pattern)
He did try to flash CWM to it but now recovery is not working at all.
At this point he gave the phone to me.
I flashed fresh XEN firmware to the I9001 and the stock recovery is showing up again. But it still isn't working. It says in the bottom of the screen >>> status = 0 <<<
I can scroll through the recovery but even the reboot phone option doesnt work.
How can I perform an full wipe so that the phone doesn't ask for email/password?
I tried SPH-D710.ODIN_WIPE_CACHE_DATA.exe but that does nothing.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
And then nothing, After 60 minutes it still hangs here.
Does anybody have some idead how i can wipe it via Odin or ADB?
Please, tell me what XEN firmware is, I've never read it somewhere (in connection to android)?!
Did you find out your I9001 is a special hardware release?
Did you try to flash a custom recovery like ClockWorkMode (CWM) Recovery or TWRP?
Do you want to keep this phone stock?
Greetings
Dear altruists,
My phone (Samsung GT-I9001) is virus affected. All apps on the phone doesn't run & force close pop-up appears. So I want to flash it to stock rom. I have downloaded the stock rom from samfirmware & now trying to flash it in downloading mode using odin. I am now stuck on the following step from last few hours-
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9001XXKPU_I9001XXKPH_I9001OXAKP1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
Next steps doesn't comes. What can I do?
Notes-
I have samsung drivers for mobile phones installed.
Trying using odin v3.07
@guljarsust if I remember well, you need Odin 4.43, the only version compatible with AriesVE
tetakpatalked from N7100