Database Develop

stuck at samsung galaxy note n-7000

after i wrongly flshed criskelo rom(isntantly flashed rom in cmw whit out anything i forgoted ) my phone can't boot!
stuck at samsung galaxy notetryed every rom and...
after wrongly..! i followed root galaxy note .com steps exactly
event can't boot whit parandroid rom that i did tryed befor that!
trying too unroot to STOCK GB whit ODIN http://rootgalaxynote.com/galaxy-note-unroot/how-to-unroot-galaxy-note-gt-n7000/

kamranhaghighi said:
after i wrongly flshed criskelo rom(isntantly flashed rom in cmw whit out anything i forgoted ) my phone can't boot!
stuck at samsung galaxy notetryed every rom and...
after wrongly..! i followed root galaxy note .com steps exactly
event can't boot whit parandroid rom that i did tryed befor that!
trying too unroot to STOCK GB whit ODIN http://rootgalaxynote.com/galaxy-note-unroot/how-to-unroot-galaxy-note-gt-n7000/
Click to expand...
Click to collapse
Flash gb rom by using PC ODIN. After flashing gb rom go to recovery and wipe data and cache. Try this method.

ty but can u give me a link? i jsut founded this http://forum.xda-developers.com/showthread.php?t=1424997
i can't download but i did 1 time and can't pause and download speed is 2kb/s:| its 3:50 am and i jsut waiting for linK plz somone give me one tomarow i most go for my wimax because it had delay for 8 days and still waiting

any GB/\ ROM? i tryed a rocket rom GB from CWM but still stuck anyway im download ODIN version and waiting to download!
or stock?

kamranhaghighi said:
any GB/\ ROM? i tryed a rocket rom GB from CWM but still stuck anyway im download ODIN version and waiting to download!
or stock?
Click to expand...
Click to collapse
You must flash stock GB rom only, using odin.

jeetu1981 said:
You must flash stock GB rom only, using odin.
Click to expand...
Click to collapse
+1, yes PC ODIN only
Dont flash ics rom and do the wiping in data, it will hardbrick your phone. WARNING DONT WIPE IN ICS RECOVERY DATA OR FACTOCRY RESET OR DO NANDROID IT WILL SUPERBRICK YOUR PHONE.o

ok can u give me a link plz fast! and superbrick is unfixable?

kamranhaghighi said:
ok can u give me a link plz fast! and superbrick is unfixable?
Click to expand...
Click to collapse
This link might be helpful....its a pre rooted gb rom thread, can b used in pc odin....
All d best...!!!:good::good::good:
XDA Thread:
http://forum.xda-developers.com/showthread.php?t=1535025

thanks downloading no wipe

GOD WHY? all links are from hotfile ;( unluky badly unluky

this http://forum.xda-developers.com/showpost.php?p=25289773&postcount=207 saved me
i'm following this video now whit my 4-10kb/s net speed:| it takes 1h to load i can't wait for my wimax!
http://www.youtube.com/watch?v=ehXcnqntsro

afte that i see someting like isntalling updates than it stuck at galaxy note n7000 again
can i return my phone? some 1 help me plz

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Rooted_Stock_Odex_N7000XXLA6.tar.md5 is valid.
<OSM> MODEM.tar.md5 is valid.
<OSM> CSC_N7000XEULA1_XEU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> hidden.img
<ID:0/003> zImage
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response form LOKE
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
thats log but still stuck at samsung galaxy note n-700 logo
PLZ i wont lose my 1300$ expancive device

kamranhaghighi said:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Rooted_Stock_Odex_N7000XXLA6.tar.md5 is valid.
<OSM> MODEM.tar.md5 is valid.
<OSM> CSC_N7000XEULA1_XEU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> hidden.img
<ID:0/003> zImage
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response form LOKE
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
thats log but still stuck at samsung galaxy note n-700 logo
PLZ i wont lose my 1300$ expancive device
Click to expand...
Click to collapse
Stuck at Samsung logo is normal if you flash GB rom over ICS, just go to recovery (vol up+ home + power) and perform wipe and reboot.
As you are on Gingerbread now, it is safe to perform full wipe in stock recovery.

jeetu1981 said:
Stuck at Samsung logo is normal if you flash GB rom over ICS, just go to recovery (vol up+ home + power) and perform wipe and reboot.
Click to expand...
Click to collapse
This will solve your issue
Sent from my GT-N7000 using xda premium

THANKS REALLY but if not work can i pm u?^_^

did a wipedata/factory reset in stock recovery but still stuck at samsung galaxy note GT-N7000

kamranhaghighi said:
did a wipedata/factory reset in stock recovery but still stuck at samsung galaxy note GT-N7000
Click to expand...
Click to collapse
replied to your pm, please check it.

and one mroe thing
i did this! Nandroid Backup and Restore:
You are able to do Full Nandroid Backups on CF-Root Kernel. But you have to restore them using Abyss Kernel 4.2!!!
If you try to Restore with CF-Root, your Restore will hang up and you will at least lose Root
(befor lfashing GB whit odin!

waiting to recive ur repalay! it takes long time whit irans net:S

[Q] Problem with flashing anything on Gt9001

Hello everyone,
im having some issues with my GT 9001.
Im running a custim rom With 2.3.4
Kernel 2.6.35.7-perf [email protected] '1
Buildnumber Gingerbread.XXKP4
I want to go back to my stock Rom. I'Ve Downloaded the newest Firmware from Sammobile together With odin.
When i now Start to flash it always end up with
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9001BOKQ4_I9001BOKQ3_I9001DTMKQ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Complete(Write) operation failed.
<ID:0/010> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Removed!!
I've already tried that with different Cables and Computers always the same Message.
After this doesn'T worked i'Ve tried to install any custom Through CWM.
On this example i tried to Install the new Cyangemod via CWM.
Im getting the following Errors that way.
s1.directupload.net/images/130421/fzakpov4.jpg
I hope anyone can help me to install any other rom
Thx

Gh0stwind said:
Hello everyone,
im having some issues with my GT 9001.
Im running a custim rom With 2.3.4
Kernel 2.6.35.7-perf [email protected] '1
Buildnumber Gingerbread.XXKP4
I want to go back to my stock Rom. I'Ve Downloaded the newest Firmware from Sammobile together With odin.
When i now Start to flash it always end up with
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9001BOKQ4_I9001BOKQ3_I9001DTMKQ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Complete(Write) operation failed.
<ID:0/010> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Removed!!
I've already tried that with different Cables and Computers always the same Message.
After this doesn'T worked i'Ve tried to install any custom Through CWM.
On this example i tried to Install the new Cyangemod via CWM.
Im getting the following Errors that way.
s1.directupload.net/images/130421/fzakpov4.jpg
I hope anyone can help me to install any other rom
Thx
Click to expand...
Click to collapse
First of all, it is I9001. Second, you need a custom recovery, check out the one in my signature (yes it is a link, you can click on it). You definitely didn't install it from CWM!!!
I don't know much about Odin.... Try the one's on our wiki (the phone name in my sig -- ALso a link.)
ps. Please be a bit more specific next time you post, like what custom rom you installed and what version of CWM, etc. It makes it that much easier to help:silly:

Thank you for the Help.
I've installed the New Arisve and it seems to work.
The update CyangenMod seem to work now. Its starting with the CyangenMod right now. Hope everything will work now.
Edit: The Cyangenmod is now stucked at the loadingscreen from cyangenmod. I already flashed it again Via CWM and still the same stuck on loading screen.
I tried to flash the Rom from the Signatur of stepie22.
Flashing a Stock rom via Odin still doesn't work. Got the Same error mentioned in the starting post.

@Gh0stwind There is a bit of a language gap here, so correct me if I'm wrong here. What you're saying is:
I've installed the New Arisve and it seems to work.
Click to expand...
Click to collapse
Flashing a Stock rom via Odin still doesn't work. Got the Same error mentioned in the starting post.
Click to expand...
Click to collapse
You've tried to flash stock rom via ODIN, but you got the same error
The update CyangenMod seem to work now. Its starting with the CyangenMod right now. Hope everything will work now.
Edit: The Cyangenmod is now stucked at the loadingscreen from cyangenmod. I already flashed it again Via CWM and still the same stuck on loading screen.
I tried to flash the Rom from the Signatur of stepie22.
Click to expand...
Click to collapse
You've got it working somehow, not it hangs at the boot animation.
------------------------------------------------------------------------------------------------------
Could you try to take some pictures of your phone??? Like in recovery, where you said it's stuck, etc., just sothat I can see what's going on, that I don't have to guess. Doesn't have to be great resolution, just more or less see what's going on.
EDIT: Try the odin and stuffs from the wiki page (also in my sig)

[Q] [Help] Installing a recovery to flash ROMs

Hello, I've installed the newest XXLTD Firmware and I cannot seem to make a recovery install properly on it, what should I do? which recovery should I flash?
Thanks

louayd said:
Hello, I've installed the newest XXLTD Firmware and I cannot seem to make a recovery install properly on it, what should I do? which recovery should I flash?
Thanks
Click to expand...
Click to collapse
The recovery comes with the kernel for the Note. If you want a custom recovery, flash Philz kernel. If you want KitKat then flash philz kernel and then flash the latest version of Raw Kernel.

XxPixX said:
The recovery comes with the kernel for the Note. If you want a custom recovery, flash Philz kernel. If you want KitKat then flash philz kernel and then flash the latest version of Raw Kernel.
Click to expand...
Click to collapse
Could u please link me a custom that would work with my firmware? I tries the latest philz and did not work. Thnx!

XxPixX said:
The recovery comes with the kernel for the Note. If you want a custom recovery, flash Philz kernel. If you want KitKat then flash philz kernel and then flash the latest version of Raw Kernel.
Click to expand...
Click to collapse
How shoud i install omni rom on my galaxy note gtn7000 im on Android 2.3.6 and i rooted my phone?

dmo.jr said:
How shoud i install omni rom on my galaxy note gtn7000 im on Android 2.3.6 and i rooted my phone?
Click to expand...
Click to collapse
You need to get yourself on a JB Rom first
this might help

Please can anyone help solve this? Thanks

louayd said:
Please can anyone help solve this? Thanks
Click to expand...
Click to collapse
Go SEARCH AND READ in Philz thread. Direct link to his download page is PROHIBITED. One Answer though, Find XXLTC version.

commencing atskine
Jackwu696 said:
Go SEARCH AND READ in Philz thread. Direct link to his download page is PROHIBITED. One Answer though, Find XXLTC version.
Click to expand...
Click to collapse
I did already! I couldn't find recovery matching XXLTC/LTD/LT3.. any ideas? Thanks

louayd said:
I did already! I couldn't find recovery matching XXLTC/LTD/LT3.. any ideas? Thanks
Click to expand...
Click to collapse
Use the latest XXLTA. it should work. Go to philz thread, post #3 click the link with "tw only" written beside it

Jackwu696 said:
Use the latest XXLTA. it should work. Go to philz thread, post #3 click the link with "tw only" written beside it
Click to expand...
Click to collapse
Thanks but it did not work for the new firmware should I downgrade my firmware? I wanna install slimkat

louayd said:
Thanks but it did not work for the new firmware should I downgrade my firmware? I wanna install slimkat
Click to expand...
Click to collapse
Wow? Didn't work? Oh well find philz_touch_6.19.3-n7000, flash it, reboot to recovery (press vol +, home + power button). Do all wipes n formats, flash the rom
Sent from my GT-N7000 using XDA Free mobile app

Jackwu696 said:
Wow? Didn't work? Oh well find philz_touch_6.19.3-n7000, flash it, reboot to recovery (press vol +, home + power button). Do all wipes n formats, flash the rom
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.19.3-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> recovery.img
<ID:0/009> NAND Write Start!!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
:S

louayd said:
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
philz_touch_6.19.3-n7000.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:9)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
recovery.img
NAND Write Start!!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
:S
Click to expand...
Click to collapse
Did you tick re-partition?? I was telling you to flash it through stock recovery, then reboot to recovery Not by odin. Try the XXLTA vers. In stock recovery, too. If all fails, downgrade your rom to XXLTA
Sent from my GT-N7000 using XDA Free mobile app

louayd said:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.19.3-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> recovery.img
<ID:0/009> NAND Write Start!!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
:S
Click to expand...
Click to collapse
The file you trying to flash using Odin will no be successful. Use a TW based Philz kernel.

[Q] Hard Bricked my s3 mini gti8190

Well i hard bricked my phone I think? I tryed to use the s5 styled rom stock Virginty V14 and I updated to the latest version of the baseband anr6 or something because that was in the rom setup while in twrp 2.7.1.0, I was on a pacman 4.4.4 custom rom before that, and I think it changed my normal bootlogo screen to i890t? instead of i890. I cannot boot into recovery anymore, ive tryed flashing over cyanogenmod 11 from novafusion, but nothing, ive tryed to flash recoverys, and nothing just a bootloop, this is the first time i've ever had this problem and I was just wondering how I fix it and if it can be fixed, I can still get into odin mode if theres a file or anything for download to fix this? I'm not sure why it did this, just need my phone back asap, any help would be appreciated

As you can get Odin to work, install original firmware from sammobile
http://www.sammobile.com/firmwares/
Sent from my GT-I8190N running SlimKat

Already tryed that, no luck, tryed to change the param folder too idk what to do

look here.
Put battery out and in.
Download laFleur ROM, boot into download-mode and flash it.
After that, flash custom recovery like TWRP from Android-Andi.
After that flash any custom ROM you like.
HTH

tryed it man, no luck again, like after i flashed that param.sfl file, it started to like show like a kind of broken screen kinda thing everytime i try to boot my phone up or boot into recovery, obviously the buttons still work, I really need to have a talk to the dev but since i cant post on the thread I was hoping someone could ask for me? edit: I think my download mode isnt working either because it says all this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I8190XXAMA2_809600_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_QXE_I8190QXEAMA1_20130109.163004_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> STE_boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> STE_boot1.img
<ID:0/003> STE_boot2.img
<ID:0/003> ipl.bin
<ID:0/003> modem.bin
<ID:0/003> ssgtest.img
<ID:0/003> normal.bin
<ID:0/003> normal2.bin
<ID:0/003> param.lfs
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
-------------------<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)--------------------- <-- this line shows up after the phone reboots, and it just keeps in a bootloop after its all flashed and then like a minute or two later these lines show up, but my phones not even connected, just a constant ugly screen bootloop... help.

So it seems I was flashing the wrong region country firmware its working again thanks was hard to find the new Zealand firmware haha, now my first splash boot is still like a TV do I flash the param.LFS file for gt-i8190t model and will I have to fresh install the stock firmware again?

imvyzel said:
So it seems I was flashing the wrong region country firmware its working again thanks was hard to find the new Zealand firmware haha, now my first splash boot is still like a TV do I flash the param.LFS file for gt-i8190t model and will I have to fresh install the stock firmware again?
Click to expand...
Click to collapse
So instead of getting the Gt-I8190 and samsung boot image and animation you have some buzz image like a tv, do this go to novafusion .pl I can't post links yet <.< s3 Mini--> Extras --> Original Boot logo download the correct one for your device, you have to install this via TWRP it should fix it

STRATOS99KINGZ said:
So instead of getting the Gt-I8190 and samsung boot image and animation you have some buzz image like a tv, do this go to novafusion .pl I can't post links yet <.< s3 Mini--> Extras --> Original Boot logo download the correct one for your device, you have to install this via TWRP it should fix it
Click to expand...
Click to collapse
You may have to flash it a couple of times if it doesn't work the first time
Sent from my GT-I8190N running SlimKat

Install the original firmware. If that doesn't work, using Odin install clockworkmod recovery and then install cm11.... Once you install cwm recovery remember to format the media and data!!
Sent from my GT-I8190 using XDA Free mobile app

[SM-T715Y] Downgrade from Android 6.0.1 to 5.0.2

Hey guys , wanted to know if it's possible to downgrade my Galaxy Tab S2 8' (SM-T715Y)
i have GPU issue in my device and i tried a few 6.x.x roms and nothing solved it.
i wanted to try 5.x.x roms.
for instance i want to flash that rom : http://forum.xda-developers.com/tab-s2/development/rom-v1-0-byjafangie-odin-flashable-t3286293
what should i do ?
----
im using Official 6.0.1 ROM on this moment.
thanks alot for those who can enlighten me a little bit.
best regards.

naty106135 said:
Hey guys , wanted to know if it's possible to downgrade my Galaxy Tab S2 8' (SM-T715Y)
i have GPU issue in my device and i tried a few 6.x.x roms and nothing solved it.
i wanted to try 5.x.x roms.
for instance i want to flash that rom : http://forum.xda-developers.com/tab-s2/development/rom-v1-0-byjafangie-odin-flashable-t3286293
what should i do ?
----
im using Official 6.0.1 ROM on this moment.
thanks alot for those who can enlighten me a little bit.
best regards.
Click to expand...
Click to collapse
Before flashing a custom 5.x.x ROM on a tablet that is running MM, I'd advise that you first use ODIN to install the stock 5.x.x ROM, after doing a full wipe. There is a difference in the partition structure between 5 and 6 and flashing from recovery won't handle that.

I see , so downloading the stock 5.x.x i want and then using ODIN to flash it , root the device again and flash custom recovery to install the other roms.
am i right ?
and do you think that i might need specific version of Odin ?
- thanks for the quick answer ! .

naty106135 said:
I see , so downloading the stock 5.x.x i want and then using ODIN to flash it , root the device again and flash custom recovery to install the other roms.
am i right ?
and do you think that i might need specific version of Odin ?
- thanks for the quick answer ! .
Click to expand...
Click to collapse
Correct but you must also be sure to wipe prior to install from ODIN. And the same ODIN you used to get MM will work fine.

lewmur said:
Correct but you must also be sure to wipe prior to install from ODIN. And the same ODIN you used to get MM will work fine.
Click to expand...
Click to collapse
.. Downloaded the Stock ROM and tried to flash it -> SW REV CHECK FAIL
the file i tried : T715YDXU1AOI4_T715YOLB1AOI4_T715YDXU1AOI3_HOME.tar.md5 (STOCK 5.0.2 THL)
odin version : Odin3_v3.11.1.exe
Current version : STOCK 6.0.1 THL
Odin Log ::
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T715YDXU1AOI4_T715YOLB1AOI4_T715YDXU1AOI3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-----------------------------------------------------------------
* i did cleaned both cache and data prior to flash using the stock recovery .
* in odin i only checked Auto Reboot AND F.reset time and the tar.md5 into the AP section .
any advice? ( i think it's due to bootloader updated version which cannot be reveted ).