im using owains kang ics cm9 based but when i start my phone it says system ui stopped but i didnt change anything how can i fixe that
also i cant find my notifcations bar how can i get i back
i would like all help
Well first boot into recovery and wipe data and cache. Also wipe dalvik cache. Reboot and see if it's ok. Then report here for further help if needed.
heavencanwait said:
Well first boot into recovery and wipe data and cache. Also wipe dalvik cache. Reboot and see if it's ok. Then report here for further help if needed.
Click to expand...
Click to collapse
thanks im gonna try that
i report later
heavencanwait said:
Well first boot into recovery and wipe data and cache. Also wipe dalvik cache. Reboot and see if it's ok. Then report here for further help if needed.
Click to expand...
Click to collapse
I wiped cache , data and also dalvic cache but it still gives system ui has stopped
What to do
Re download the rom u may have a bad download .. then wipe and install from scratch .. also be wary of titanium back up.. if u xo use it only restore is user apps no system apps or data
Sent from my Optimus 2X using xda app-developers app
Thanks im gonnna try it where can i find it again that its good
Sent from my Optimus 2X using xda app-developers app
Related
I'm on 0.6 with bricked kernel. How do I upgrade? Full wipe or just cache and dalvik cache? Assuming bricked kernel will still work...can't see why not
Sent from my R800i using XDA App
Nhialor said:
I'm on 0.6 with bricked kernel. How do I upgrade? Full wipe or just cache and dalvik cache? Assuming bricked kernel will still work...can't see why not
Sent from my R800i using XDA App
Click to expand...
Click to collapse
I wipe/delete factory reset and wipe dalvik cache. Flash the zip, then restore data using cwm. It works for me.
I just did wipe cache & dalvik cache, installed the zip and it went OK.
I took a nandroid backup first, just in case, but it seems to be fine.
chicle_11 said:
I wipe/delete factory reset and wipe dalvik cache. Flash the zip, then restore data using cwm. It works for me.
Click to expand...
Click to collapse
hwo do u restore data using CWM?
viny2cool said:
hwo do u restore data using CWM?
Click to expand...
Click to collapse
In cwm, choose advanced restore (in restore and backup), then choose restore data.
Since I can't post in dev forum:
So far I've seen Cyanogenmod9 screenshots on Touchpad only in landscape. Is it possible to use ICS on touchpad in portrait mode? Could somebody with alpha1/2 post a screenshot?
sombrerro said:
Since I can't post in dev forum:
So far I've seen Cyanogenmod9 screenshots on Touchpad only in landscape. Is it possible to use ICS on touchpad in portrait mode? Could somebody with alpha1/2 post a screenshot?
Click to expand...
Click to collapse
no screenshot, but i can confirm its works perfectly fine
Using the rom for quite some time and the only problem I'm facing is with market fc. A lot of my apps are having problems due to this eg. Temple run starts and then market force close pop-up keeps on coming .......please tell me a solution to this ......really like the Rom. ....great work flatzki
Sent from my LG-P970 using Tapatalk
Sent from my LG-P970 using Tapatalk
I have tried out this rom myself on OB. It all worked perfectly for me so I just need to ask a few questions. What version? V6 or...?
Quick solutions:
1) Boot into CWM and wipe/restore to factory settings (all your apps and user data will be deleted (its a pain but it usually irons out all the kinks), then wipe cache, then clear dalvik cache.
2) In Rom Manager, click "fix permissions".
YoursTrulySarcastic said:
I have tried out this rom myself on OB. It all worked perfectly for me so I just need to ask a few questions. What version? V6 or...?
Quick solutions:
1) Boot into CWM and wipe/restore to factory settings (all your apps and user data will be deleted (its a pain but it usually irons out all the kinks), then wipe cache, then clear dalvik cache.
2) In Rom Manager, click "fix permissions".
Click to expand...
Click to collapse
Clear market data from settings, wipe dalvik cache from cwm, Fix permissions. Don't wipe data ...
Sent from my LG-P970 using XDA
YoursTrulySarcastic said:
I have tried out this rom myself on OB. It all worked perfectly for me so I just need to ask a few questions. What version? V6 or...?
Quick solutions:
1) Boot into CWM and wipe/restore to factory settings (all your apps and user data will be deleted (its a pain but it usually irons out all the kinks), then wipe cache, then clear dalvik cache.
2) In Rom Manager, click "fix permissions".
Click to expand...
Click to collapse
Thanks man.....rom manager tip worked like a charm....
Sent from my LG-P970 using Tapatalk
No problem broseph! Hit thanks and stuff, and keep tweaking!
Sent from my LG-P970 using XDA
YoursTrulySarcastic said:
I have tried out this rom myself on OB. It all worked perfectly for me so I just need to ask a few questions. What version? V6 or...?
Quick solutions:
1) Boot into CWM and wipe/restore to factory settings (all your apps and user data will be deleted (its a pain but it usually irons out all the kinks), then wipe cache, then clear dalvik cache.
2) In Rom Manager, click "fix permissions".
Click to expand...
Click to collapse
Thanks from me, as well! I kept encountering the same problem. This did the trick.
Hey xda......
i have a prob with the jb rom "jro03l 4.1.1. Rc10 beta"
The Yaos updater crashs every time i start it.
can someone help.....please?
"sry 4 bad english"
Sent from my GT-I9000 using xda app-developers app
have you tried to reflash and do all 3 wipes?
Try to wipe befor and after the flash.
Richy1989 said:
have you tried to reflash and do all 3 wipes?
Try to wipe befor and after the flash.
Click to expand...
Click to collapse
Thx for your answer.
I try it now.Do you mean cache and dalvik wipe after flashing?
djceet said:
Thx for your answer.
I try it now.Do you mean cache and dalvik wipe after flashing?
Click to expand...
Click to collapse
Yes.
This is my typical flash procedure and i never had any problems (so far )
1) wipe data/Factory reset
2) cache and dalvik wipe
3) Fix Permissions
4) flash new rom
5) step 1 - 3 again
Richy1989 said:
Yes.
This is my typical flash procedure and i never had any problems (so far )
1) wipe data/Factory reset
2) cache and dalvik wipe
3) Fix Permissions
4) flash new rom
5) step 1 - 3 again
Click to expand...
Click to collapse
Doesn`t work.....
Now my SGS1 will get the full JVU-Punch.
Found this in an other topic:
Originally Posted by beint
I installed from the Extras app(CVM, wipe cache, wipe Dalvik, flash). Then when trying to open, the app closes. Just saying it stopped. Even tried clearing data and retry, still same. Anyone else?
Sent from my GT-I9000
read carefully the known bugs plz..
put the Language to Spanish to make it work...
(also devs are tryin to fix it)
Ok...it works!!!!
To use the new EXTRA APP you have to change the language to spain :silly:
I downloaded the GAPPS RC10 and the WEATHER APP RC10.
Now i wait for a fix
I have LG optimus Black.
I face this problem a few times and i cannot find a way to solve this problem.
Can someone please HELP me out and advice me.
Whenever i use SMART FLASH, after i install superuser in my phone then Re-booth my phone.
whenever i try to update anything or install anything MY phone will AUTO RE-BOOTH.
can someone please advice?
panda_linger said:
I have LG optimus Black.
I face this problem a few times and i cannot find a way to solve this problem.
Can someone please HELP me out and advice me.
Whenever i use SMART FLASH, after i install superuser in my phone then Re-booth my phone.
whenever i try to update anything or install anything MY phone will AUTO RE-BOOTH.
can someone please advice?
Click to expand...
Click to collapse
Your in the wrong thread.
Use SFT,Clear Data and Cache then goto advanced and clear dalvik. Flash Super User.zip then reboot. If it doesn't work it's time to send it in to the repair shop (after flashing stock ROM ofcourse).
(You have a bit of a lisp there )
Mod can you please move this to the right thread.
I need some more advice.
Is there any other way i can solve this problem?
panda_linger said:
Mod can you please move this to the right thread.
I need some more advice.
Is there any other way i can solve this problem?
Click to expand...
Click to collapse
Theres no other solutiom
Sent from MercurySandwich
SoulExertz said:
Theres no other solutiom
Sent from MercurySandwich
Click to expand...
Click to collapse
what is the parts that need to be replace or repair?
can you please advice?
My phone already run out of warranty.
My place has got no techs that are good in ANDROID phones repair...
so please advice thanks
SoulExertz said:
Theres no other solutiom
Sent from MercurySandwich
Click to expand...
Click to collapse
could it be something to do with my play store?
as after i flash it the version of my play store is version 3.4.
I ever face this problem before.
I remember that time i manage to get it updated to version 3.8 EVERY Thing went fine after that.
But i forgot HOW to get it UPDATE to VERSION 3.8 from version 3.4 (which ALWAYS AUTO-RESTART, whenever i try install anything)
Go to recovery and make a full wipe.
It should be enoguh.
Cheers
SoulExertz said:
Theres no other solutiom
Sent from MercurySandwich
Click to expand...
Click to collapse
RD Test tool...
Zecanilis said:
Go to recovery and make a full wipe.
It should be enoguh.
Cheers
Click to expand...
Click to collapse
thanks i will try and RE-post on the outcome.
panda_linger said:
thanks i will try and RE-post on the outcome.
Anyway your FULL wipe meaning is?
Can you please define thanks?
Click to expand...
Click to collapse
Wipe data, cache, go to advanced, wipe dalwik, done
Recovery -> Wipe Data/factory reset
Has said, factory reset.
Zecanilis said:
Recovery -> Wipe Data/factory reset
Has said, factory reset.
Click to expand...
Click to collapse
You forgot dalvik wipe...
Zecanilis said:
Go to recovery and make a full wipe.
It should be enoguh.
Cheers
Click to expand...
Click to collapse
Steps i did.
1. flash V20s using smart flash
2.i wipe data/factory reset
3. wipe cache
4. wipe dalvik cache
5. wip batt stats
6. install superuser
REBOOTH
i went into play store.
Its still at version 3.4.7
when i only updating Gmail after 100% download
PHONE will AUTO RESTART
and AFTER rebooth GMAIL is still not updated!
Im really PUZZLE?????
Please dont give up on my problem
Hope more advice from all kind GUYS out here keeps pouring in
THANKS
1. flash V20s using smart flash
1.1 install superuser
2.i wipe data/factory reset
3. wipe cache
4. wipe dalvik cache
5. wip batt stats
REBOOT
If doesn't work TRY:
1. flash V20s using smart flash
1.1 install superuser
REBOOT
After booting...
REBOOT RECOVERY
2.i wipe data/factory reset
3. wipe cache
4. wipe dalvik cache
5. wip batt stats
REBOOT
Zecanilis said:
1. flash V20s using smart flash
1.1 install superuser
2.i wipe data/factory reset
3. wipe cache
4. wipe dalvik cache
5. wip batt stats
REBOOT
If doesn't work TRY:
1. flash V20s using smart flash
1.1 install superuser
REBOOT
After booting...
REBOOT RECOVERY
2.i wipe data/factory reset
3. wipe cache
4. wipe dalvik cache
5. wip batt stats
REBOOT
Click to expand...
Click to collapse
Thaks i will re-post the outcome in 10 mins
Zecanilis said:
1. flash V20s using smart flash
1.1 install superuser
2.i wipe data/factory reset
3. wipe cache
4. wipe dalvik cache
5. wip batt stats
REBOOT
THE METHOD ABOVE WORKS!!!!!!
You are WONDER...
Thanks for not giving up on my problem so fast...
I really appreciate....
THANKS alot
Click to expand...
Click to collapse
Because I am a Chinese boy, so my English is not very good. I hope you can forgive
My device is Google NEXUS6 ,can use the CM12, mokee, chroma，but use Blisspop，My device Infinite loop or crash in the second screen.
Tried many times to recover the official ROM,but still the same.
Very, very fond of blisspop ROM,I hope you can help me，Thank you !
Which gapps are you using? Have you tried flashing just bliss pop, boot into ROM, then go back into recovery and flash gapps?
bigstunta101 said:
Which gapps are you using? Have you tried flashing just bliss pop, boot into ROM, then go back into recovery and flash gapps?
Click to expand...
Click to collapse
Thank you for your reply
As mainland China can not use Google, so I did not flash gapps.
My steps are:
1. Restore official factory firmware (5.0 or 5.1)
2. NRT 2.4 Get ROOT
3. Obtain REC
4.flash Blisspop Rom
5.wipe data / factory reset, wipe cache partition
why continue using blisspop ?? just use a different rom.. a lot of roms is out there
Your bootloader is unlocked right?
bigstunta101 said:
Your bootloader is unlocked right?
Click to expand...
Click to collapse
Thank you for your reply
YES
I see a lock device is turned on in the following {Google} LOGO
reyscott1968 said:
why continue using blisspop ?? just use a different rom.. a lot of roms is out there
Click to expand...
Click to collapse
Thank you for your reply
Currently only see Blisspop Rom has Floating window function
I'm too used to this feature.
Deeply fascinated by it
Next time you flash the ROM, wipe dalvik, and cache before you reboot the device into the system and see if that helps
jfa2008 said:
Thank you for your reply
As mainland China can not use Google, so I did not flash gapps.
My steps are:
1. Restore official factory firmware (5.0 or 5.1)
2. NRT 2.4 Get ROOT
3. Obtain REC
4.flash Blisspop Rom
5.wipe data / factory reset, wipe cache partition
Click to expand...
Click to collapse
U can't wipe data, system AFTER u flash, u need to wipe the device, then flash the rom, then boot the rom, don't wipe after flashing
Sent from my Nexus 6 using Tapatalk
soupysoup said:
U can't wipe data, system AFTER u flash, u need to wipe the device, then flash the rom, then boot the rom, don't wipe after flashing
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Thank you for your reply
I have tried not wipe system, but the situation is still unchanged
bigstunta101 said:
Next time you flash the ROM, wipe dalvik, and cache before you reboot the device into the system and see if that helps
Click to expand...
Click to collapse
Thank you for your reply
I have tried not wipe system, but the situation is still unchanged
jfa2008 said:
Thank you for your reply
I have tried not wipe system, but the situation is still unchanged
Click to expand...
Click to collapse
Yes but if u wipe AFTER flashing, this will always happen, what u need to do is this,
Download rom
Boot to recovery,
Wipe system, data, cache, dalvik cache
Flash rom
Boot
That's it, don't wipe after flashing
Sent from my Nexus 6 using Tapatalk
soupysoup said:
Yes but if u wipe AFTER flashing, this will always happen, what u need to do is this,
Download rom
Boot to recovery,
Wipe system, data, cache, dalvik cache
Flash rom
Boot
That's it, don't wipe after flashing
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Thank you for your reply
Please forgive my English is not very good, so you may not be able to fully understand your meaning.
I tried Wipe system, data, cache, dalvik cache
And then Flash rom
But it is still a problem.
But you say——“don't wipe after flashing”？
jfa2008 said:
Thank you for your reply
Please forgive my English is not very good, so you may not be able to fully understand your meaning.
I tried Wipe system, data, cache, dalvik cache
And then Flash rom
But it is still a problem.
But you say——“don't wipe after flashing”？
Click to expand...
Click to collapse
No dont wipe after flashing.
Also grab a logcat as that will help find the issue.
zelendel said:
No dont wipe after flashing.
Also grab a logcat as that will help find the issue.
Click to expand...
Click to collapse
Please forgive me for a long time to reply to you
Because China is not allowed to visit a lot of websites
I re testing, and then tell you the result. Thank you