cannot boot into android (liquid 1.5) (did i brick it???) - Motorola Droid Bionic

So i flashed .232 over 905 everything worked perfectly, I rooted and then install Bootstrap-ICS and installed liquid 1.5, now i'm stuck at liquid bootscreen (been there for over 6hrs) i cannot get any output from adb logcat (shows waiting for device), so what i did was boot into the stock recovery and did a wipe, rebooted, same problem. So I was going to try to flash .232 backover Liquid 1.5 but putting the device in AP fastboot mode.
[email protected]:~$ moto-fastboot32 devices
no permissions fastboot
same with android-sdk fastboot command.
Is there anyway to boot into the bootstrap clockwork recovery? So I can try flashing liquid 1.5 again on CM9?? I have no idea how to access clockwork since I cannot boot into the os.
Please tell me my phone is not bricked!!!
I tried flashing the .232 thru the stock recovery but get a error about build.prop after verifying the file and it wont flash

RSD Lite is your friend. For sure need to FXZ man.
Sent from my XT875 using Tapatalk 2

lhkjohn said:
RSD Lite is your friend. For sure need to FXZ man.
Sent from my XT875 using Tapatalk 2
Click to expand...
Click to collapse
Ok so i FXZ;'ed 905 and now i get
Invalid Flash Mode (S) Boot Failure
Invalid CG OTV (CG: webtop): Invalid SP Data
Invalid CG HAB (CG: webtop, status: 0X0035)
Invalid CG OTV (CG: webtop)

xarejayx said:
Ok so i FXZ;'ed 905 and now i get
Invalid Flash Mode (S) Boot Failure
Invalid CG OTV (CG: webtop): Invalid SP Data
Invalid CG HAB (CG: webtop, status: 0X0035)
Invalid CG OTV (CG: webtop)
Click to expand...
Click to collapse
Try FXZ'ing 902, I've yet to have the 905 one to work for me.
Sent from my XT875 using Tapatalk 2

So why 2 threads for the same problem?

lhkjohn said:
Try FXZ'ing 902, I've yet to have the 905 one to work for me.
Sent from my XT875 using Tapatalk 2
Click to expand...
Click to collapse
902 same result

Edited..... Never mind
Sent from my ICS DROID BIONIC using my fingers

Just fxz to 905 yesterday. Did you download the Fxz file or the installation file?
Sent from my XT875 using xda app-developers app

I was in the exact same situation after trying Liquid out... I can't remember all the steps I took to get back to Eclipse 3.0 on 905 but one thing I know for sure... u r not bricked......
Sent from my DROID BIONIC using xda premium

xarejayx said:
902 same result
Click to expand...
Click to collapse
Did you ever get this fixed. If so, how? Thanks.
MARKREIF said:
I was in the exact same situation after trying Liquid out... I can't remember all the steps I took to get back to Eclipse 3.0 on 905 but one thing I know for sure... u r not bricked......
Sent from my DROID BIONIC using xda premium
Click to expand...
Click to collapse
Still can't remember?

Related

Help frozen bionic

I was using pathsaver to upgrade my phone to 902 from eclipse 2.0 but it finished it just stays at the Motorola boot up screen any ideas? I would appreciate any help.
Sent from my SGH-I777 using xda premium
lakid06 said:
I was using pathsaver to upgrade my phone to 902 from eclipse 2.0 but it finished it just stays at the Motorola boot up screen any ideas? I would appreciate any help.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
You're gonna have to find the .902 FXZ file and flash it with RSDlite with AP Fastboot mode.

[Q] My Bionic always boots to 'Bad Flash' screen

I flashed it back to stock 902 a few weeks ago. For some reason, it comes up to the "Bad Flash" screen every time I turn it on. I have to turn it of, hold down both volume buttons, turn it back on, and then choose "normal boot". It's fine after that. Is there an easy way to clear this? I'm currently running SafeStrap as my recovery.
flash failure?
I've been having this same issue. Flash failure is what mine says
Sent from my DROID BIONIC using XDA
Flashing any .img sucessfully should clear the error.
That's what I thought too
Yeah, for some reason, the area does not clear. I updated to Spearmint Gummy ICS thinking it would clear the error, but no such luck.
Did you have any errors when flashing to 902?
download the 902 FXZ file, adb Motorola drivers and rsd lite 5.6. Google for links.
flash the 902 free in rsd lite, will restore you back to stock 902
Sent from my Eclipsed Bionic
I has a space error, but I cleaned some stuff off and was able to flash no problem. I first ran into the issue when trying to go from Liberty Rom 2.0 back to stock 901
coldhardtruth said:
download the 902 FXZ file, adb Motorola drivers and rsd lite 5.6. Google for links.
flash the 902 free in rsd lite, will restore you back to stock 902
Sent from my Eclipsed Bionic
Click to expand...
Click to collapse
I did that originally which got me back to stock 902. This screen persists at boot.
Hey OP, Go into the factory recovery and wipe data.
You know how to get to stock recovery?
Sent from my Eclipsed Bionic
coldhardtruth said:
Hey OP, Go into the factory recovery and wipe data.
You know how to get to stock recovery?
Sent from my Eclipsed Bionic
Click to expand...
Click to collapse
Just did that, but it didn't work. I did a full data wipe/factory reset in stock recovery. I still get the "bad flash" screen on every boot up.
And you for sure Flashed with the most current 902 FXZ file right? Not with 901?
Sent from my Eclipsed Bionic
coldhardtruth said:
Hey OP, Go into the factory recovery and wipe data.
You know how to get to stock recovery?
Sent from my Eclipsed Bionic
Click to expand...
Click to collapse
I went into stock recovery and did a full data/factory wipe. The "bad flash" screen persists at each boot.
coldhardtruth said:
And you for sure Flashed with the most current 902 FXZ file right? Not with 901?
Sent from my Eclipsed Bionic
Click to expand...
Click to collapse
I did. At the time, my storage was pretty full. That's when I got the error to begin with. I cleaned some space up and then did it again and it succeeded. I still get the "bad flash" screen with each boot though.
I would try flashing again. Your using rsd lite 5.6 with it right?
Sent from my Eclipsed Bionic
The data wipe and factory reset is not going to change the flash failure error you are receiving. You need to successfully flash an image before it will go away. You can do this with RSDlite 5.6 or moto-fastboot the specific images.
I can help you in more detail, if needed.
Here is a good place to download the full 902 fxz...http://www.droidforums.net/forum/droid-bionic-hacks/202176-detailed-safestrap-instructions.html
Send me a PM if you need more help.
eye_dea is correct. Just flash any image with moto-fastboot will clear the flash failure and let you boot normally.
I had the same issue on my bionic. It said flash failure and nothing I could do would fix it. Finally I found a thread that said to try "FixCDT". I put the FixCDT file in my ADB folder and ran it. Instantly it rebooted my phone normal. I am not sure where the thread was, but just google FixCDT and I am sure you can find it. If that doesn't work sorry.

Problem 'System Update Failed'?

Can anyone help me, I've tried to update to JB but I keep getting this same error.. I have root and locked bootloader (i even tried factory resetting)
Sent from my XT890 using xda app-developers app
Anyone know what Im doing wrong?
Sent from my XT890 using xda app-developers app
Do you have CWM recovery installed?
I do not
Sent from my XT890 using xda app-developers app
What is your system version, how are you trying to update and what kind of error do you get? If you explain your problems someone might give you a solution.
free2live said:
What is your system version, how are you trying to update and what kind of error do you get? If you explain your problems someone might give you a solution.
Click to expand...
Click to collapse
The system version is in the attached image. i
i've been trying the OTA update, i got a popup a few hours ago.. the problem basically is this, the phone shuts down to install the update, a green android with a blue spherical spinning thing appears, then about quarter of the way (you can see the blue progress bar below the droid) it freezes for a little bit then a green droid with a red warning sign appears with a frozen blue bar at the quarter way point and the phone reboots and it then says 'System Update Failed' once booted into the homescreen
Sent from my Razr I XT890
That's odd. Try to re-download the update as it may be corrupted. I don't know of any reason why the update would not be installed even though you are rooted on a locked bootloader.
Manually install the update through Recovery. This will give us the full error.
Sent from my Galaxy Nexus using Tapatalk 2
Hi,
I get an error too when I try to install the new OTA update to JB.
I get this on CWM:
- "Install untrusted package ?" I enter "Yes - install untrusted zip"
With details:
"E: failed to verify whole-file signature
E: signature verification failed"
Next error:
"file_getprop: failed to stat "/system/build.prop": No such file or directory
E: Error in /cache/Blur_Version.81.5.40002.XT890.Retail.en.EU.zip (status 7)
Installation aborted"
So I try reboot system now, but the phone reboot and try ti update again.
What can I do please ? I tried a wipe date without success.
Thanks.
I'm trying to wipe cache and downloading the update again at this time.
GuiGuiGTT said:
Hi,
I get an error too when I try to install the new OTA update to JB.
I get this on CWM:
- "Install untrusted package ?" I enter "Yes - install untrusted zip"
With details:
"E: failed to verify whole-file signature
E: signature verification failed"
Next error:
"file_getprop: failed to stat "/system/build.prop": No such file or directory
E: Error in /cache/Blur_Version.81.5.40002.XT890.Retail.en.EU.zip (status 7)
Installation aborted"
So I try reboot system now, but the phone reboot and try ti update again.
What can I do please ? I tried a wipe date without success.
Thanks.
I'm trying to wipe cache and downloading the update again at this time.
Click to expand...
Click to collapse
You have to uninstall the CWM recovery to use OTA update
mattlgroff said:
Manually install the update through Recovery. This will give us the full error.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
How would I do this?
@free2live Ive tried it 2-3 times now with no luck
Sent from my Razr I XT890
Ok ! So simple... Thanks free2live !!
I will try this :victory:
AW: Problem 'System Update Failed'?
Manny- said:
How would I do this?
@free2live Ive tried it 2-3 times now with no luck
Sent from my Razr I XT890
Click to expand...
Click to collapse
Nevermind, it wasn't your Error
Damn i should read better.
Sent from my XT890
HSD-Pilot said:
Your Screenshot is Orange GB and your Error Message shows the Retail EU Update.zip.
Maybe you should try the orange GB JB with an Stock Recovery
Sent from my XT890
Click to expand...
Click to collapse
I think the error message was posted by someone else
AW: Problem 'System Update Failed'?
Lol...i figured it out
Sent from my XT890
Manny- said:
How would I do this?
@free2live Ive tried it 2-3 times now with no luck
Sent from my Razr I XT890
Click to expand...
Click to collapse
Boot to Motorola Recovery....install it...?
Not difficult.
Sent from my Galaxy Nexus using Tapatalk 2
How easy is it to do the whole motorola recovery process? Could I get a little help?
Please
Sent from my XT890 using xda premium
I removed CWM and I get exactly the same error as Manny-
I tried to boot to recovery but the screen stay black with the android doodle with the red warning... :crying:
After waiting several minutes, the phone reboots.
And now Superuser isn't working
Sent from my XT890 using xda premium
I had the same error while I had "[DeOdexed Rom] 81.5.31002 Retail Great Britain" from mattlgroff. Tried everything but ended up getting back to Stock ROM and was able to update normally.

[Q] Brick Help!

Had a brain fart earlier and started to install a backup over the stock rom. Pulled the battery as soon as I figured out what I did, and now it won't go past the red M. When I try to flash via RSD, it gets stuck on #5, and reads
"Failed Flashing Process. 5/24 oem fb_mode_set -> Phone returned FAIL."
Any ideas? I can't find the files for the one-click recovery, and trying the other threads' suggestions didn't work.
Factory reset and start over
Sent from my DROID BIONIC using Tapatalk 4
bonzai276 said:
Factory reset and start over
Sent from my DROID BIONIC using Tapatalk 4
Click to expand...
Click to collapse
The phone won't go into safestrap, so I'm not sure how to do that
Sent from my Nexus 7 using Tapatalk 4
http://forum.xda-developers.com/showthread.php?p=40489935
Sent from my DROID BIONIC using Tapatalk 4

[Q] Stuck after correct decrypt code entered. Razr i. Telcel

I HAVE AN XT890 and have been using it for about two weeks..
I rooted the phone and just installed rooted apps on top of stock firmware.
but then I tried installing a mod ROM and it goes trough, but when is at the "Type password to decrypt storage"
I enter my code and it goes fwd but then it just stops at the green android dude that has gears for top and bottom parts....
I thought it was a problem with my password, but I realized that it still recognizes it, since it does not go to the green android sceen if I enter the incorrect password..
I tried to just wait for it.. But no luck..
tried to flash a stock ROM using RSD lite
I get an error with a command Not recognized
In recovery, I try to wipe data, but it says:
wiping data
Formating /data...
Error mounting /data!
Skipping format...
Formatting /cache...
Formatting /sd-ext...
Formatting /sdcard/.android_secure...
Error mounting /sdcard/.android_secure!
Skipping format...
Data wipe complete.
Thanks in advance to all of you guys!!!
If i read it correctly, u are trying to wipe and then flash a custom ROM through stock recovery?
Sent from my XT890 using xda app-developers app
Hazou said:
If i read it correctly, u are trying to wipe and then flash a custom ROM through stock recovery?
Sent from my XT890 using xda app-developers app
Click to expand...
Click to collapse
Yes, but not stock recovery..
using the latest one i think its called clockwork mod.. Its an orange top hat and it is touch..
Were did u get it from? I assume u did unlock your boot loader.
Sent from my GT-P5110 using XDA Premium HD app
Hazou said:
Were did u get it from? I assume u did unlock your boot loader.
Sent from my GT-P5110 using XDA Premium HD app
Click to expand...
Click to collapse
I did..
I see the: "warning.. Bootloader unlocked" thing when the phone powers on..
And I am pretty sure I got it from this website.
sorry, this is the version of recovery I am using
Cwm-based Recovery v6.0.1.9
FIXED!!
Hazou said:
Were did u get it from? I assume u did unlock your boot loader.
Sent from my GT-P5110 using XDA Premium HD app
Click to expand...
Click to collapse
So.. I got it to work.. This is what I did
Flashed twrp and was able to wipe all data correctly.
Tried to flash ROM but Took too long
Flashed cmw and installed the ROM.. And voilĂ !!
All is good now!
Nice one. Installing the ROM can take some time. Even in twrp.
Sent from my GT-P5110 using XDA Premium HD app

Categories

Resources