Hi all,
I want to install V20S ROM with Smart Flash tool..
While the process if somehow the cable has losse connection and disconnects and reconnects, will my phone get bricked ?
If bricked, what is the process to unbrick?
Related
Hi.
I am pretty desperate and out of ideas with my X8 right now. I was just trying to flash in xRecovery this ROM: http://forum.xda-developers.com/showthread.php?t=1393520 , but my phone now is bricked. I know that its only for custom kernel, but I was just about to try it with the stock one. So when i have done flashing, I rebooted, and since then i was just stuck on boot logo "Sony Ericsson". PCC recognizes my phone but I cant access recovery menu. I was trying PCC and flash tool, and im stuck at step where its going to flash it. I hold back button as its written there, but my computer doesnt regognize anything (on the phone the green light shows on, does it mean that it is in flash mode? i really dont know, sorry). I have been searching around and i installed latest Gordons Gate (driver). I dont think so its hard bricked, because i´m having locked bootloader. Anyone can help me? I will REALLY appreciate it
ah..if it has SE then it still living ...use PCC
heres how i did it ..
1.enter PCC
2. click Support zone ( dont connect your phone )
3.wait for it to download (if i am right it will start a download? not sure)
4.at phone software update click start
5.it will say cant find phone then you click repair phone..
6.follow instructions =)
(DONT CONNECT YOUR PHONE YET )
at least you have a SE logo ...my phone got totally brick from unlock bootloader =(
next time try it with the kernel needed eh
use a flashtool to unbrick your device.
when you hold back button whilst plugging in and there is green light there still is some life in there. just do what has been said already.
thank you guys, i already repaired it with flash tool, my problem was that my computer doesnt recognized my X8 when it was in flash tool so i installed PC Companion, it automatically installed drivers and i could have done flashing
Helo
I was using smartflash to flash the v20l rom to my phone, but I got a timeout error at downliading the 4th partition table.
then now my phone not starts and its stucked in NVidia usb boot-recorvery mode so smartflash don't recognise my phone
What should I do now?
Install V20L via KDZ instead?
i cant turn on my phone to do the kdz method its tucked in APX
In that case NVFlash this: http://forum.xda-developers.com/showthread.php?t=1007825 and start again.
dont works its always stop at flashing system.img
EDIT
I plugged my phone to a USB 3 port, now the nflash have succesfuly finished the process my phone got back from APX mode to normal
Thank you Rusty!
Hi guys, after a hard brick i restore my phone following the guide for hardbricked devices but now i can't install any kdz because my pc don't recognize my phone to install it. i try reinstalling drivers, reset the pc, other cables.
Other thing after this un-hardbrick my phone can't get rooted, what i mind, even after un-rooting the download mode show me "rooted" at the bottom.
i have installed stock kiktkat v10c.
And the last thing is i can't try to install a custom recovery, when i try my phone got hard bricked.
any suggestions? thx for read and srry for my poor english
Huawei P7-L01 Soft Bricked
i use Mtk_Droid_Tool to make scatter
and use that scatter to fash my phone with SP_Flash_Tool
when i click on download in sp flash tools
my phone shutdown
its not going to boot loop
its not charging
i cannot do any thing with it
when i connected to computer huawei hisuit application recognize it but it can do nothing
please help what can i do???
Hello all! i have problem with my xperia. i did not used it for loon time and after i tried to tur it on it suck on boot loop. after that i tryed to repair it with companion but it did not work becouse it sas that phone is locked and i nead to turn it on to begin repairs. So i try next best thing try to flash it and install flash tool and try to flash it and it has begin to flash after a minut it stoped and did not continued, i tried to begin new instalation and it cant cant conect properly cant boot in fast boot mode, i tryed to unlock bootloader i do not know is it unlocked or not but i cant do that becouse i cant start phone and start in fast boot nead help please also i have isues with conection becouse i use windows 10 cant install drivers have problem with them :crying::crying:
dedmen said:
Hello all! i have problem with my xperia. i did not used it for loon time and after i tried to tur it on it suck on boot loop. after that i tryed to repair it with companion but it did not work becouse it sas that phone is locked and i nead to turn it on to begin repairs. So i try next best thing try to flash it and install flash tool and try to flash it and it has begin to flash after a minut it stoped and did not continued, i tried to begin new instalation and it cant cant conect properly cant boot in fast boot mode, i tryed to unlock bootloader i do not know is it unlocked or not but i cant do that becouse i cant start phone and start in fast boot nead help please also i have isues with conection becouse i use windows 10 cant install drivers have problem with them :crying::crying:
Click to expand...
Click to collapse
0) Charge your phone to 100%
1) Use Flashtool instead of Sony Companion.
2) Find and flash any Android 4.3 official firmware (for locked bootloader) eg. from here? Check your device model!
3) If you want to go any further (to AdrianDC Lineage OS 15.1 Oreo or AOSP Oreo or other custom ROM) follow Bootloader Unlocking Procedure by Sony.
Good luck! PS: Read what you write before posting. Clean your post, give appropriate title. This forum is to help, but you need to read on your own.