Not able to flash a new modem - Captivate Q&A, Help & Troubleshooting

I'm trying to flash the proper modem for my dad's captivate. I currently have him running Helly Bean v10 which is a CM10 based ROM. I'm at wits end here I have downloaded the proper modem i897-kh3_cwm3.zip but whenever I flash it through a CWM based recovery it says
Installing Update...
E: Error in /sdcard/download/i897-kh3_cwm3.zip)
(Status 0)
Instillation Aborted.
Any help is appreciated.

r_dub said:
I'm trying to flash the proper modem for my dad's captivate. I currently have him running Helly Bean v10 which is a CM10 based ROM. I'm at wits end here I have downloaded the proper modem i897-kh3_cwm3.zip but whenever I flash it through a CWM based recovery it says
Installing Update...
E: Error in /sdcard/download/i897-kh3_cwm3.zip)
(Status 0)
Instillation Aborted.
Any help is appreciated.
Click to expand...
Click to collapse
Status Error 0 means wrong update-binary, so try using a different modem

I've tried 8 different ones
Sent from my Galaxy Nexus using xda premium

r_dub said:
I'm trying to flash the proper modem for my dad's captivate. I currently have him running Helly Bean v10 which is a CM10 based ROM. I'm at wits end here I have downloaded the proper modem i897-kh3_cwm3.zip but whenever I flash it through a CWM based recovery it says
Installing Update...
E: Error in /sdcard/download/i897-kh3_cwm3.zip)
(Status 0)
Instillation Aborted.
Any help is appreciated.
Click to expand...
Click to collapse
Are you sure you are using CyanogenMod modem zip? Also using a i897 módem on AOSP will probably cause noise in the line. Might want to take a look at I9000 modems.
Sent from my Slim Bean Powered Captivate using Tapatalk 2

Related

[Q] error ROM Manager

Hello,
just bought ROM Manager, because I want to flash CyanogenMod 7.1 to my Galaxy S i9000
Got 2 problems:
1. Trying to Backup Current Rom, I get the following error:
Verifying update package
Failed to verify whole-file signature
Signature verification failed
Installation package aborted.
2. It's unclear to me which device I must choose when flashing the Recovery Image: Galaxy i9000 (no CyanogenRom listed) or i9000 MTD (one stable and 1 nightly CyanogenRom in the list of ROM's)
MTD? What is MTD? Both options seem to flash CWM Recovery.
I must be doing something stupid, and Koushik Dutta doesn't respond to my messages I'd appreciate your help, thanks!
Kaie Klaassen
GT-i9000 Firmware 2.3.3
kernel 2.6.35.7-i9000XWJVH-CL184813
[email protected]#2
Build Gingerbread.XWJVH
I'm asking for help as well, so this may not be much use, but I read a few threads back that if you have a stock recovery, the CWM or backup won't pass signature verification. It said that you needed to flash a modded 3E recovery image to your phone before proceeding. Like I said, it may not be much use, but it's worth looking into
Edit: Saw the date on this, realized you've probably already been helped >.<

installing rom Helly Bean...

http://forum.xda-developers.com/showthread.php?t=1783064
I follow the instructions but when I tried to install the rom was rebooting and now I can not install any other rom with the error:
"E: failed to verify whole-file signature"
"E: signature verification failed"
What happened?
My system now
Firmware version
2.3.3
Baseband version
I897UCKF1
Kernel version
2.6.35.7-I897UCKF1-CL273832
Build number
GINGERBREAD.UCKF1
U need a kernel with CWM Recovery to flash from...not Stock kernel.
See TRusselo's Flashing Guide that is a stickied thread in the Q & A Forum.
Sent from my SAMSUNG-SGH-I897 using xda premium
I had almost same issue when I was trying to revert back from slimbeans as the JB installation changed the partitions on my phone memory. I had to restore stock via odin using a PIT file for repartitioning the memory to its original.
I think the same should help you.
desiwizard said:
I had almost same issue when I was trying to revert back from slimbeans as the JB installation changed the partitions on my phone memory. I had to restore stock via odin using a PIT file for repartitioning the memory to its original.
I think the same should help you.
Click to expand...
Click to collapse
where you see or get file PIT?
tks
4-2ndtwin said:
U need a kernel with CWM Recovery to flash from...not Stock kernel.
See TRusselo's Flashing Guide that is a stickied thread in the Q & A Forum.
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
I tried, but not flash kernel and rom, freeze in home screen load samsung...

[Q] Upgrading from Froyo on GT P1000

I have tried several times (on different PCs and versions) to upgrade from stock Froyo on my P1000 using Kies but it always throws up the same error: "Failed to run firmware upgrade. Unknown error occurred."
So I started reading through this forum and several other guides to find a work-around.
First thing I had to do was root it which worked using SuperOneClick.
Then I found out that I needed ClockWorkRecovery Mod and this is where things started to fall apart. Most guides are for Gingerbread, I'm still on Froyo - I've tried the following:
Using Heimdall Suite in 'Download Mode' to flash the kernel with cwn-5-p1.tar - throws up this: "ERROR: "kernel" is not a vaild argument"
Using Odin to do the same - doesn't see the device when in download mode (but does in normal mode).
So now I'm stuck as I cant get CWR on the device so can't move to the next stage. Any advice appreciated, I'm pretty new to this so please go easy on the terminology!
I don't think you have missed my many posts?
I always recommend Overcome method. But you will need to wipe everything.
The link is in my signature.
Download the guide, download GB-stock-safe-v5 package,
download overcome kernel.
Jump to page 7 of the PDF and flash GB-stock-safe-v5, using Odin that is in that package.
Flash Overcome kernel using Odin again,
and you have your CWM.
Thanks for the reply I will give it a try and post progress.
Excellent, that guide worked a treat, I now have the Overcome ROM 4.1.0 installed.
Looking at the settings tells me I have firmware 2.3.6.
Is there a way to upgrade this even further to Ice Cream Sandwich? Or would it be advisable to stick with this OS?
Isn't that why you look to install cwm in the first place?
You can use cwm to flash any custom ROM.
There are aosp based ROMs around, like cm9, cm10, aokp, etc.
Usually you must flash the ROM, maybe a few times if from GB,
Then flash gapps (the correct one for the ROM version), then reboot.
Sent from my GT-P1000 using xda app-developers app

Can't load any ROM in my SGH-I897

hi
I'm writing for the first time although I've been visiting the forum for couple of weeks as I'm facing a problem with my samsung SGH-I897.
PROBLEM HISTORY
it was a present to me which was already rooted and loaded with ICS rom (I can't remember the version, kernel, baseband or build no). 2 weeks back, I tried to upgrade the phone with JB Slim custom rom (www.android.gs/update-galaxy-captivate-i897-jelly-bean-slim/) but stuck with AT&T bootlogo. I tried to go back to ICS again but accidentally did something wrong in CWM recovery (don't know the version) for which CWM went back to original 3e version.
Since then I couldn't load any rom (by CWM or Odin) bcos there was error in CWM saying failed to mount /dbdata... etc. 2 days ago I found a fix for that in blog.kalpetros.com/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
Then I loaded GB rom 2.3.5 , baseband I897UCKJ1 , kernel 2.6.35.7-I897UCKJ1-CL614489 . But my CWM is still 3e.
THE PROBLEM NOW
1) I am trying to update the captivate but every time I try to update I get this:
-- Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted.
I've tried Lanight, Slim Rom (again) but no use. what should I do?
2) Maybe there is a kernel issue (it says here forum.xda-developers.com/showthread.php?t=1874327 ). So to flash new kernel I followed the instruction from androidprof.blogspot.com/2013/02/upgrading-rooting-and-then-installing.html?goback=%2Egde_86481_member_213543419 and forum.xda-developers.com/showthread.php?t=1350266 but Odin hangs at midpoint and the captivate becomes softbricked. Then again I have to load the GB. is the odin defective? (I used odin 1.85 & odin3)
3) I tried to load GB I897UCKK4 by one click odin installer but it hanged everytime. why?
thanx in advance
Sent from my GT-I9070 using xda app-developers app
shiploo35 said:
hi
I'm writing for the first time although I've been visiting the forum for couple of weeks as I'm facing a problem with my samsung SGH-I897.
PROBLEM HISTORY
it was a present to me which was already rooted and loaded with ICS rom (I can't remember the version, kernel, baseband or build no). 2 weeks back, I tried to upgrade the phone with JB Slim custom rom (www.android.gs/update-galaxy-captivate-i897-jelly-bean-slim/) but stuck with AT&T bootlogo. I tried to go back to ICS again but accidentally did something wrong in CWM recovery (don't know the version) for which CWM went back to original 3e version.
Since then I couldn't load any rom (by CWM or Odin) bcos there was error in CWM saying failed to mount /dbdata... etc. 2 days ago I found a fix for that in blog.kalpetros.com/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
Then I loaded GB rom 2.3.5 , baseband I897UCKJ1 , kernel 2.6.35.7-I897UCKJ1-CL614489 . But my CWM is still 3e.
THE PROBLEM NOW
1) I am trying to update the captivate but every time I try to update I get this:
-- Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted.
I've tried Lanight, Slim Rom (again) but no use. what should I do?
2) Maybe there is a kernel issue (it says here forum.xda-developers.com/showthread.php?t=1874327 ). So to flash new kernel I followed the instruction from androidprof.blogspot.com/2013/02/upgrading-rooting-and-then-installing.html?goback=%2Egde_86481_member_213543419 and forum.xda-developers.com/showthread.php?t=1350266 but Odin hangs at midpoint and the captivate becomes softbricked. Then again I have to load the GB. is the odin defective? (I used odin 1.85 & odin3)
3) I tried to load GB I897UCKK4 by one click odin installer but it hanged everytime. why?
thanx in advance
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
From your signature, you have a GT-I9070, which is a different device. This section is for the Captivate.
Perhaps this link can help you: http://forum.xda-developers.com/showthread.php?t=1985398
NO, it's Captivate
BWolf56 said:
From your signature, you have a GT-I9070, which is a different device. This section is for the Captivate.
Perhaps this link can help you: http://forum.xda-developers.com/showthread.php?t=1985398
Click to expand...
Click to collapse
I used my wife's cell to post. So it is Captivate SGH-I897 that is giving me problem.
See TRusselo's Guide here ---> http://forum.xda-developers.com/showthread.php?p=19425513
Sent from my SAMSUNG-SGH-I747 using xda premium
tried and didn't work
4-2ndtwin said:
See TRusselo's Guide here ---> http://forum.xda-developers.com/showthread.php?p=19425513
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Yes I've tried but odin hangs during flashing of speedmod kernel (everytime).
THANX anyway.
Did ya take a look at this Captivate - PC Connection Issues thread ?? ...http://forum.xda-developers.com/showthread.php?p=33227541
And u could flash the .tar file of KK4 Corn Kernel instead of the Speedmod kernel...http://forum.xda-developers.com/showthread.php?p=18233847
Sent from my SAMSUNG-SGH-I747 using xda premium
odin hangs
4-2ndtwin said:
Did ya take a look at this Captivate - PC Connection Issues thread ?? ...http://forum.xda-developers.com/showthread.php?p=33227541
And u could flash the .tar file of KK4 Corn Kernel instead of the Speedmod kernel...http://forum.xda-developers.com/showthread.php?p=18233847
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
thank you 4-2ndtwin,
I think the pc connection is ok bcos I can flash the GB 2.3.5 I897UCKJ1 ROM by odin 3. (infact it's the only ROM I can flash)
And Odin cannot flash the kk4 kernel, it hangs at midpoint.
SO FAR HERE GOES THE SUMMERY
I can only flash the above mentioned ROM. No other ROM, kernel, CWM recovery can't be loaded by Odin 1.85 or 3.
Same goes for flashing through recovery mode. there's always signature verification failure error (see 1st post)
bad usb driver, connector or cable can cause intermittent fail like that, mid flash, even though it looks okay when you start. also, have you tried redownloading your sources? signature verification can mean failed md5 checksum= corrupt source file.
Out of curiosity, did you accidentally enable the signature verification in speedmod? I did that yesterday while installing Captivating and it'll throw the signature verification error lol. Just click it again in CWM and you should be able to get passed the signature verification.
laughingT said:
bad usb driver, connector or cable can cause intermittent fail like that, mid flash, even though it looks okay when you start. also, have you tried redownloading your sources? signature verification can mean failed md5 checksum= corrupt source file.
Click to expand...
Click to collapse
I don't know, if it's bad usb driver, connector or cable how come they always give trouble during flashing everything except I897uckj1 rom?
and, I'll try redownloading the sources (have to browse the history)
nope
x0ne215 said:
Out of curiosity, did you accidentally enable the signature verification in speedmod? I did that yesterday while installing Captivating and it'll throw the signature verification error lol. Just click it again in CWM and you should be able to get passed the signature verification.
Click to expand...
Click to collapse
there's no such option in my cwm. the cwm is 3e and very limited. it has only 4 option... reboot, update from zip, wipe factory data, wipe cache.
CWM and 3e recovery are 2 different things. CWM is a CUSTOM recovery, 3e is the stock recovery. It sounds like you're still on stock recovery.
Have you tried using ADB to push a CWM recovery.img to the device? There should be some tutorials or posts on other threads here about doing it. I had to do that for my Pantech Crossover.
Once you do that, you can flash a ROM no problem.
x0ne215 said:
... It sounds like you're still on stock recovery
Have you tried using ADB to push a CWM recovery.img to the device?....
Once you do that, you can flash a ROM no problem.
Click to expand...
Click to collapse
ok thanx, this ADB thing is sounds complicated to me. but I'll learn it.
bad news
ok... bad news.. phone is hard bricked... no download mode, no charging battery display when plugged to wall... this is going near to the end.
Time to build a jig. See the how to if you want to diy. There are a few you can buy online if you're lazy
Sent from my SGH-I897 using xda app-developers app
It's quicker and easier to just do it yourself, there's a no solder method on the forums here.
I'm trying
yes.. I'm following this 2 solderless threads jig without cutting usb cord and jig with cutting usb cord
but no luck yet, have to identify the problem. is there any suggestions about these methods or any other?
What problem? Only follow 1 of the guides, they're different, hence why there's 2.

Unable to flash modem

Need help
I am using Supernexus 2.0 Build 4
While trying to flash XXJVT Modem I am getting this error-
assert failed: run_program( /tmp/updater.sh ) cm10
Can anyone please confirm why this is happening. Googled about it and all I was able to find that it was due to change in partition layout but I believe this ROM is based on the new partition layout only, isnt it?
If Not can anyone guide me to flashable zip of Jvt Modem for this Rom
Thanks

Categories

Resources