Related
Hey guys. I recently made a USB otg cable and I have TRR 1.5 ICS rom. when I plug it in Clock selection dialogs pops up. question is Which Rom and kernal paired... would run the USB otg host mode???
I'll appreciate for the help...
AFAIK many had tried to get it going on various ICS Roms, and no-one succeeded. Do let us know if you manage to connect it.
Sure dude... But its the ICS kernal which doesnt have OTG support right... ???
Galaxy note
Yeah, it seems so.
hey guys,
First I think I dont need to open a new thread for my question.So asking it here.Has anyone managed to connect another android phone as host to your note?I tried with my old nokia 2700 and it works and when I tried to connect my sgs it didnt but it charges in ac mode.So anyone tried to connect your android phone to your Gnote?
Hi, i have an half bricked HD7 and i'm trying to fix it with goldcard since i read this thread http://forum.xda-developers.com/showthread.php?t=1417761
I followed this guide http://forum.xda-developers.com/showthread.php?t=893152
I have the CID, i have the goldcard.img, i have a good rom and i copyed it to my 1GB SD card after i renamed it to SCHUIMG.nbh. Now i don't fully understand what i have to do.
At this point on the guide:
4-connect usb cable except the one for the wp7
boot your device into usb host mode(volume down + camera on Trophy)
and connect the last usb cable.
the screen of your wp7 look like this if all work.
This point is not clear to me, may someone explain better what i have to do and what should happen?
I have an Y-cable and a female-female adaptor. Please tell me what to do.
Thanks for your answers.
Google is your best friend.check this link out. http://forum.xda-developers.com/showpost.php?p=10187622&postcount=1
Oh, really? Thanks a lot.
Did you read my question? I already checked that guide, and I don't understand the 4th point.
manuel92 said:
Hi, i have an half bricked HD7 and i'm trying to fix it with goldcard since i read this thread http://forum.xda-developers.com/showthread.php?t=1417761
I followed this guide http://forum.xda-developers.com/showthread.php?t=893152
I have the CID, i have the goldcard.img, i have a good rom and i copyed it to my 1GB SD card after i renamed it to SCHUIMG.nbh. Now i don't fully understand what i have to do.
At this point on the guide:
4-connect usb cable except the one for the wp7
boot your device into usb host mode(volume down + camera on Trophy)
and connect the last usb cable.
the screen of your wp7 look like this if all work.
This point is not clear to me, may someone explain better what i have to do and what should happen?
I have an Y-cable and a female-female adaptor. Please tell me what to do.
Thanks for your answers.
Click to expand...
Click to collapse
connect all the cables, except the phone (micro USB on the bottom of the phone)
press and hold volume down button with the camera button, then press the power button, the phone should turn on with a grey screen and blue text in the middle that says "Enter USB Host Mode" or something like that..
connect your phone to usb
your screen should look like the photo attached in that thread
Ok, i did everything as you said, and my phone was in "Enter USB host mode". After i connect it to USB it changes to "Loading..." and remains stuck there forever. I also tried with different card readers and different micro SD (always 1 GB or lower), same results.
Notice that my card readers don't have a flashing light so i don't know wether they are working or not. I assume they are working because the screen changes in "Loading" but for some reason it gets stuck in there.
Maybe I should change rom? I'm using a NoDo rom i found on an italian blog since i can't download the ones the xda forum provides, i always get the error "server is busy" or something like that.
Do you have any suggestion? I'm using this rom anyway:
ht tp:// uplo aded .to/file /dud fva8j
(remove spaces)
Edit: the rom i'm using is not a custom rom of course, it's the original NoDo.
manuel92 said:
Ok, i did everything as you said, and my phone was in "Enter USB host mode". After i connect it to USB it changes to "Loading..." and remains stuck there forever. I also tried with different card readers and different micro SD (always 1 GB or lower), same results.
Notice that my card readers don't have a flashing light so i don't know wether they are working or not. I assume they are working because the screen changes in "Loading" but for some reason it gets stuck in there.
Maybe I should change rom? I'm using a NoDo rom i found on an italian blog since i can't download the ones the xda forum provides, i always get the error "server is busy" or something like that.
Do you have any suggestion? I'm using this rom anyway:
ht tp:// uplo aded .to/file /dud fva8j
(remove spaces)
Edit: the rom i'm using is not a custom rom of course, it's the original NoDo.
Click to expand...
Click to collapse
hmm, are you sure the ROM you're using is the one for your phone, you know, if your phone is T-Mobile, you have to download tmobile rom... etc
and maybe there isn't enough power for the phone and the reader, try using your wall charger not your computer/laptop
and try asking a friend to download you the roms from xda, especially if you know someone with different ISP
hope it works
hmm, are you sure the ROM you're using is the one for your phone, you know, if your phone is T-Mobile, you have to download tmobile rom... etc
and maybe there isn't enough power for the phone and the reader, try using your wall charger not your computer/laptop
and try asking a friend to download you the roms from xda, especially if you know someone with different ISP
hope it works
Click to expand...
Click to collapse
I'm absolutely sure the rom is exactly for my phone, and i'm using a wall charger (i also tried with computer though).
I'll try to download the roms from xda in some way, can someone give me a link to a working one? I tried from this list but some links say the file has been removed, others just don't work because the file sharing site is close and so on.
manuel92 said:
I'm absolutely sure the rom is exactly for my phone, and i'm using a wall charger (i also tried with computer though).
I'll try to download the roms from xda in some way, can someone give me a link to a working one? I tried from this list but some links say the file has been removed, others just don't work because the file sharing site is close and so on.
Click to expand...
Click to collapse
The ones in the link are your only hope, hmm, try pre-nodo if nodo didn't download, or ask someone to upload the one you want.
oh, if you have a flash memory less than 1gb, it could give you better results.. no harm in try.
idk, sorry, but I think that's all I got :/
hi friend pls u solve u problem i have exatly same problem stuck in loading.......... and nothing happem
---------- Post added at 08:15 PM ---------- Previous post was at 07:53 PM ----------
waltercell said:
hi friend pls u solve u problem i have exatly same problem stuck in loading.......... and nothing happem
Click to expand...
Click to collapse
problem solve card reader change and work
waltercell said:
hi friend pls u solve u problem i have exatly same problem stuck in loading.......... and nothing happem
---------- Post added at 08:15 PM ---------- Previous post was at 07:53 PM ----------
problem solve card reader change and work
Click to expand...
Click to collapse
good to hear
Hello..anyones can sharing how to make otg mode work on i9000??i don't know why my i9000 cant mount my pendrives..try with other pendrives still the same,then try to change my y cable also nothing happen.I think i will be nice if someone can sharing what rom and kernel that you use to make it work.at the same time,i think the most important part is how to setup your kernel setting...can someone help me??i'm sorry for my bad english..
CHEERS,
here is one
Mafi91 said:
Hello..anyones can sharing how to make otg mode work on i9000??i don't know why my i9000 cant mount my pendrives..try with other pendrives still the same,then try to change my y cable also nothing happen.I think i will be nice if someone can sharing what rom and kernel that you use to make it work.at the same time,i think the most important part is how to setup your kernel setting...can someone help me??i'm sorry for my bad english..
CHEERS,
Click to expand...
Click to collapse
Hi!
You can use your USB devices only with power supply.
Here http://forum.xda-developers.com/showthread.php?t=1450298 You can find tutorial.
Kernel is depended on which version of Android You are using.
iluha_ua said:
Hi!
You can use your USB devices only with power supply.
Here http://forum.xda-developers.com/showthread.php?t=1450298 You can find tutorial.
Kernel is depended on which version of Android You are using.
Click to expand...
Click to collapse
Thanks mate for you'r help..finally,i can use otg mode on my i9000..the reason why i can't mount anythings on otg mode is just because of my external power supply.and today i just bought new power bank and it finally working without any problem with app usb controller..
Cheers,
Hi everyone,
I would use my mouse/usb key on my HTC desire 510. If i understood after my researches,that's not possible on all smartphone...
So, is that possible on our HTC ?
Thanks for your future answers !
yes our stock kernel supports usb otg, as well as supplying power out. i use a 32gb sandisk usb flash drive with my 510.
Thanks for your answer.
So, i bought this the hama otg (i cannot send a link) but when i plug it in my phone, i get a message like "Phone in host mode, impossible to..."
I root it with your img.
alain21218 said:
Thanks for your answer.
So, i bought this the hama otg (i cannot send a link) but when i plug it in my phone, i get a message like "Phone in host mode, impossible to..."
I root it with your img.
Click to expand...
Click to collapse
It shouldn't be much of an issue. It does that for me too but still works, do any other errors present themselves?
Sent from my XT1028 using XDA Free mobile app
Well, i just plug the otg in my phone, without other usb. It show me "Phone in USB host". I tried with OTG checker, my kernel is ok but no signal detected by the application.
I tried to turn off the phone, & remove the battery, then put in again & turn on. When i plug in the OTG, nothing appened for a moment then the cursor of the mouse that i connected in the OTG appear for just 1 second, like a flash & the message back again.
No other problems
Today i tried to make my own OTG usb to see if the problem is the phone or the OTG hama.
When i plug my own OTG usb, nothing happen. When i plug the other OTG i just get the same message i said in my previous answers, nothing else happen.
Any idea ? I don't know but is anything i have to do like turn ON USB debug or anything else ?
Edit: I got a Xperia today to try my OTG, it seems that he works well so i just need to ask: Is the HTC desire 510 64bits EU is compatible OTG ? If it is, why my phone don't recognised my OTG ?
Still need some answers here
It just not support USB HID over USB (mouse and keyboard). Could've been disabled by HTC (reason for cursor disappearing after 1 sec of plugging in).
Sent from my XT1028 using XDA Free mobile app
Hi ! Sorry for insisting but i read on official htc web site that the htc desire 510 support usb storage. So, why nothing else that the previous message happen.
I bought another OTG today & it's forever the same...
I want to bump this topic, I have european 64-bit version and when I connect OTG cable there's info shown about phone being in usb host mode but nothing else is happening.
My thought is that tey give this option to 32-bit US version and then disable it (clumsy) in european version.
Sorry for grammar, english is not my native language.
I dont personally own a desire 510 but I know that 90% of otg issues are with the cable... Try another cable because all are not the same...
undeadking said:
I dont personally own a desire 510 but I know that 90% of otg issues are with the cable... Try another cable because all are not the same...
Click to expand...
Click to collapse
I have two cables, both work great wirh other devices .
Hi,Have u already fix ur desire 510 problems?
I already changed 3 different otg cables, seems like the same problem as u met....Any suggestions?
I had that issue when I flashed a moded kernel. Had to go back to a stock kernel and it fixed the usb issue
Sent from my 0PCV1 using XDA Free mobile app
USB OTG pops up a message in the notifications bar to let you know that you cannot simultaneously charge your device and utilise an USB device. The only reason that I can think of why the mouse cursor would disappear after a second is because you have your finger on the screen. I use my OTG with my digital camera (via Google Photos), USB Keyboard, USB Mouse, another Android device, and a 64GB flash drive almost daily, and I don't seem to have any problems.
Hello,can you please explain the details for that?
Crutchie46 said:
I had that issue when I flashed a moded kernel. Had to go back to a stock kernel and it fixed the usb issue
Sent from my 0PCV1 using XDA Free mobile app
Click to expand...
Click to collapse
I mean,,,I dont know how to go back to a stock kernel, should I root the phone?I really need this otg function for my desire 510 as I dont have enough money to buy another android phone. Appreciate for your help!
healthybanian said:
I mean,,,I dont know how to go back to a stock kernel, should I root the phone?I really need this otg function for my desire 510 as I dont have enough money to buy another android phone. Appreciate for your help!
Click to expand...
Click to collapse
If your phone is not rooted and doesn't have a custom recovery installed on it then there is no way possible that you're using a different kernel, that means that you already have the stock kernel! Is your phone 64 bit?
MrMike2182 said:
If your phone is not rooted and doesn't have a custom recovery installed on it then there is no way possible that you're using a different kernel, that means that you already have the stock kernel! Is your phone 64 bit?
Click to expand...
Click to collapse
I am not sure, the kernel version is 3.1028-g72f7e8d and @AbM103#1 SMP PREEMPT, the last two digits of serial number is 64 so does this mean it is 64bit? Thanks in advance
healthybanian said:
I am not sure, the kernel version is 3.1028-g72f7e8d and @AbM103#1 SMP PREEMPT, the last two digits of serial number is 64 so does this mean it is 64bit? Thanks in advance
Click to expand...
Click to collapse
Where are you from? If you're in the USA then it more than likely is 32 bit but if you're in another Country it's a really good chance that you're using a 64 bit and from what I've read about it the 64 bit for some reason or another doesn't work correctly with the usb otg and I can't exactly do anything to help with that since I don't have access to any 64 bit phones.
MrMike2182 said:
Where are you from? If you're in the USA then it more than likely is 32 bit but if you're in another Country it's a really good chance that you're using a 64 bit and from what I've read about it the 64 bit for some reason or another doesn't work correctly with the usb otg and I can't exactly do anything to help with that since I don't have access to any 64 bit phones.
Click to expand...
Click to collapse
Australia...probably it was ordered from USA , I will ask the one who ordered this phone,,,Thanks for your help
Hi, i have installed this rom http://forum.xda-developers.com/show....php?t=2761682 . It works but when i connect with USB cable to pc, it can't be open. Kies was working with the stock rom and now no..
Sorry for my bad english. Thank you
S voice in this rom doesn't work..
Spyro1997 said:
Hi, i have installed this rom http://forum.xda-developers.com/show....php?t=2761682 . It works but when i connect with USB cable to pc, it can't be open. Kies was working with the stock rom and now no..
Sorry for my bad english. Thank you
S voice in this rom doesn't work..
Click to expand...
Click to collapse
Does the computer recognize the phone at all when connected?
Is usb debugging enabled?
Did you try another cable to rule out a bad connection/or cable?
If possible try another computer too.
I am now having this problem. I tried to port a rom this morning and screwed up. Not sure what i done wrong but anyhow, I downgraded to NCE like i have many times, rooted and then used Muniz thread to get back to 5.0 rooted lollipop. Now my comp will not recognize my phone. I have tried 3 different comps and 4 different cables. I believe it has something to do with the phone. Is there anyway to downgrade back to NCE using stock recovery and flashing via the external sd card. or does anyone know how to fix this.
Edit: i tried a different port and it is working. Weird how it didn't work on 3 comps but it did on the original comp that i tried it on. Just a different port.