Hi there,
I was wondering...I see that there is a possibility for the other Galaxy Tab's to connect an external storage via USB.
Is this also possible for the Tab 7" P1000? Perhaps via a custom ROM??
Greetings from the Netherlands!
Mike
Same question.
mww1977 said:
Hi there,
I was wondering...I see that there is a possibility for the other Galaxy Tab's to connect an external storage via USB.
Is this also possible for the Tab 7" P1000? Perhaps via a custom ROM??
Greetings from the Netherlands!
Mike
Click to expand...
Click to collapse
Even I have the same query.. I was hoping we could also use the feature of usb otg.. I guess it has to do something with the kernel.. I may be totally wrong as well..
Model: SGT P1000
Android: 2.3.3
Model: Sony Live With Walkman
Android: ICS 4.0
Model: SG Ace
Android: 2.3.3
In CyanogenMod 9 development thread cdesai explains USB host is possible in CM9, but only with a Y cable, not with official USB adapter from Samsung. The problem is I found in the shops the official Samsung adapter, while I believe Y cables aren't sold, so if you want to have one, you have to build one by yourselves.
You must install Samsung USB driver first.
Sent from my GT-P1000 using xda app-developers app
You are joking, right?
Sent from my GT-P1000 using xda app-developers app
IKalam82 said:
You must install Samsung USB driver first.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
You must be kidding.
Get a hold of the post first.
---------- Post added at 08:04 PM ---------- Previous post was at 07:59 PM ----------
Sir Otto said:
In CyanogenMod 9 development thread cdesai explains USB host is possible in CM9, but only with a Y cable, not with official USB adapter from Samsung. The problem is I found in the shops the official Samsung adapter, while I believe Y cables aren't sold, so if you want to have one, you have to build one by yourselves.
Click to expand...
Click to collapse
So, all we have to do is develop a Y-cable. Could you give the link of the thread you are referring to where cdesai explains usb host capabilities.
Also could you explain what are bootloader and kernel for ?
Thanks in advance.
Let me try.
Bootloader is like the boot manager in PC, like Grub or LILO in Linux.
it contains the codes that allow you to boot to recovery and download mode.
There us primary and secondary but I don't know which is which, and they are irrelevant to USB host mode.
Kernel is the actual OS.
It contains drivers as well. The USB port drivers included.
To have USB host mode, the driver has to support that mode.
(Nothing to do with SAMSUNG USB Driver, which is on PC side)
Sir Otto is referring to CM9 build
http://forum.xda-developers.com/showthread.php?t=1385153
Sent from my GT-P1000 using xda app-developers app
Hi,
Everyone here must be talking about this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I haven't used it yet but i think i read about it sometime back on one of the blogs
priyana said:
Let me try.
Bootloader is like the boot manager in PC, like Grub or LILO in Linux.
it contains the codes that allow you to boot to recovery and download mode.
There us primary and secondary but I don't know which is which, and they are irrelevant to USB host mode.
Kernel is the actual OS.
It contains drivers as well. The USB port drivers included.
To have USB host mode, the driver has to support that mode.
(Nothing to do with SAMSUNG USB Driver, which is on PC side)
Sir Otto is referring to CM9 build
http://forum.xda-developers.com/showthread.php?t=1385153
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
okay so i get it. for using usb otg we require :
1. usb host diagnostics (i guess)
2. 30 pin dock connector to female usb.
3. a y-cable
Process : connect usb otg cable to the tab, then connect y-cable to the otg cable, then connect the drive. if it requires power then connect the second end to external power supply.
Correct me if i am going wrong somewhere.
But my real question is that, do we really have a working galaxy tab 7 with usb host working and cm9 installed ? even if we have, could we have the info on that ?
---------- Post added at 11:58 AM ---------- Previous post was at 11:52 AM ----------
SGTABHI said:
Hi,
Everyone here must be talking about this
I haven't used it yet but i think i read about it sometime back on one of the blogs
Click to expand...
Click to collapse
Even i have seen this cable on ebay. But does it really work.
I guess they work on higher versions of galaxy tab because they have usb host capabilities as a built in feature. But since p1000 doesn't support, so i am not sure it works.
The problem is that the tab do not provide enough power, USB host voltage must be 5 volts which the tab do not provide.
But try this and it should work.
http://db.tt/tjw5Y39W
Sent from my GT-P1000
salahmed said:
The problem is that the tab do not provide enough power, USB host voltage must be 5 volts which the tab do not provide.
But try this and it should work.
Sent from my GT-P1000
Click to expand...
Click to collapse
i know that, thats why we need to connect a y-cable along with this and other end of the cable with power.
do you use usb host on your tab ?
Note: the link to your image is not working!!
Sorry I don't know why the image is not showing.
Try the link I added
Sent from my GT-P1000
salahmed said:
Sorry I don't know why the image is not showing.
Try the link I added
Sent from my GT-P1000
Click to expand...
Click to collapse
I saw the picture. But do you use usb otg on your tab ??
No I don't use it because I still need that extra power, so for me it is kind of useless procedure ''just my opinion'', and have to carry the y cable and the charger to get it work.
Sent from my GT-P1000
I made a Y cable with external power supply and downloaded the app USB Host Controller by SztupY. But when I run the app with either a jumpstick, an USB keyboard, or an USB mouse, the app couldn't recognize any of these devices was connected.
SGTABHI said:
Hi,
Everyone here must be talking about this
I haven't used it yet but i think i read about it sometime back on one of the blogs
Click to expand...
Click to collapse
I believe neither this isn't right: we need a Y cable, that should have a port to insert the mouse, joystick, keyboard or pendrive, a port to plug and charge the tab and a dock to connect the cable to the TAB.
I believe you'll need a Y cable and an OTG cable.
Mucchan said:
I believe you'll need a Y cable and an OTG cable.
Click to expand...
Click to collapse
a code model for the cable?
How to connect external hard drive to Galaxy Tab p1000 HD
How To connect your phone to the Galaxy Tab7 p1000
P1000 dock
Can i ask u. Have u dock for GT-P1000? I have OTG usb female and i dont have power but dock is supplied from tablet. Why... i think that there are some pins such they are supplying dock but something... or i read that tablet know what device is connect because of resistor such is on 13 and 15 pin conect... pls help me if u have dock, pls take a photo what is inside dock... thx :fingers-crossed:
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please do not post in this thread.
Official CyanogenMod 7.2-RC0 Nightly Support Thread <-- link to support thread
The latest CyanogenMod Nightly can be downloaded here or via ROMManager.
The new recovery in ROMManager (5.0.2.7) is not required, but is necessary to receive automatic updates.
ROM Customisers: The sources no longer refer to thunderg but to p500 so your
ROMs may need some work to be compatible.
Device Sources
Vendor Sources
Kernel Sources
Disclaimer: I am not responsible for anything that happens if you decide to use
this rom. It could change your life, you might win the lottery or find a
stunning new boyfriend / girlfriend because of this rom. It could also make
your phone explode and burn your house down or cause the apocalypse to come
early (it's not due till the end of the year!).
Flash responsibly.
OLD BASEBAND?
If your phone uses the old baseband, you can flash the following zip after flashing the nightly to get everything working again. NOTE: you will need to reflash this zip every time you upgrade to the latest nightly!!
Old Baseband Fix - Flashable ZIP
NO-APN PROBLEMS?
If you get GSM but no data, and you cannot save any APN settings, it means you have what I'm calling a 'funny SIM'. Certain mobile operators use SIMs which include an extra data storage area to be used for things like GSM Banking etc. CyanogenMod currently does not fully support these SIMs on the new baseband.
APN / FUNNY SIM FIX - Flashable ZIP (Includes the files above, you only need to flash this one)
Please thank werewolfo for generously donating an Italian funny SIM for me to test with!.
Shout outs go to:
andy572, _Arjen_, Bytecode, franciscofranco, fserve, lupohirp, mik_os,
and anyone else who may have left useful advice on these forums!
Disclaimer: I am not responsible for anything that happens if you decide to use
this rom. It could change your life, you might win the lottery or find a
stunning new boyfriend / girlfriend because of this rom. It could also make
your phone explode and burn your house down or cause the apocalypse to come
early (it's not due till the end of the year!).
Flash responsibly.
P.S. Special thanks to: everyone who donated to get this project going. Much appreciated!
Which ROM is the best?
You shouldn't be using these roms anymore. please see the CyanogenMod 7 Nightlies thread (link above)
as of today official support for these roms have ended.
as of today official support for these roms have ended.
as of today official support for these roms have ended.
Great work! Thanks!
Good, it's more organized now.
But could you link first post directly to download link instead of the post with it?
MaKTaiL said:
Good, it's more organized now.
But could you link first post directly to download link instead of the post with it?
Click to expand...
Click to collapse
perhaps later, I want everyone to read the posts
Great work. You say you use and recommend F series but before you said N series will officially be supported by cm7.2, is this still true??
Sent from my LG-P500 using XDA App
ScripterJR said:
Great work. You say you use and recommend F series but before you said N series will officially be supported by cm7.2, is this still true??
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
It's the other way around. He is using new baseband now and I'm not aware of official support for p500.
ScripterJR said:
Great work. You say you use and recommend F series but before you said N series will officially be supported by cm7.2, is this still true??
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
wow, that F key sure is close to that N key
can i update on top of N1 without wiping all the data?
Still no data and when I try to add an APN, after entering all the details and clicking 'save' there's nothing there. ffs
Also does anyone else get it where if their SIM card is PIN enabled and they enter Airplane Mode, after coming back out of Airplane there's no prompt for a PIN and therefore no mobile signal until you restart the phone?
Fantastic job Adam. I'm testing out the N1 now and it appears to be quite fast and extremely stable. I'm really impressed with the professionalism and class you've brought to this ROM over the past weeks.
Marcio_Bianco said:
can i update on top of N1 without wiping all the data?
Click to expand...
Click to collapse
Just wipe dalvik and cache.
You should have no problems.
digitalface said:
Still no data and when I try to add an APN, after entering all the details and clicking 'save' there's nothing there. ffs
Also does anyone else get it where if their SIM card is PIN enabled and they enter Airplane Mode, after coming back out of Airplane there's no prompt for a PIN and therefore no mobile signal until you restart the phone?
Click to expand...
Click to collapse
You need to state what ROM you are using, what kernel you are using, and what baseband you have flashed or you are wasting ours, and more importantly, the dev's time.
Is it possible to teather usb using any other kernel? A7 didnt have that problem. I want to use f8 but usb teather bug holds me to do this.
Sent from my LG-P500 using XDA App
hey! guys sorry for this OT..
in updating to new baseband do i have to disable LGE Android Platform USB Modem?
dnle71 said:
hey! guys sorry for this OT
do i have to disable LGE Android Platform USB Modem?
Click to expand...
Click to collapse
or else u may get error while changing baseband and brick ur phone
Sent from my LG-P500 using XDA App
dnle71 said:
hey! guys sorry for this OT..
in updating to new baseband do i have to disable LGE Android Platform USB Modem?
Click to expand...
Click to collapse
If you want to flash the new baseband, yes.
dnle71 said:
hey! guys sorry for this OT..
in updating to new baseband do i have to disable LGE Android Platform USB Modem?
Click to expand...
Click to collapse
No...... no disable LGE Android Platform USB Modem
Only disable LGE Virtual Modem
---------- Post added at 09:17 AM ---------- Previous post was at 09:11 AM ----------
Tested A8 no Offline charging ???
zeu55 said:
Is it possible to teather usb using any other kernel? A7 didnt have that problem. I want to use f8 but usb teather bug holds me to do this.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Don't bother about native USB tethering! Get pdanet from market!works like a charm for me!
Sent from my LG-P500 using Tapatalk
problem solved thanks!
you need to have the drivers installed. Your system will not recognize the vibrant i
you need to have the drivers installed. Your system will not recognize the vibrant if you dont have the drivers installed. //This also does not belong in the development section either. Best of luck
Use the "search" button in the Q&A forum,you posted in a wrong place
Sent from my SGH-T959 using XDA
serendipityguy said:
you need to have the drivers installed. Your system will not recognize the vibrant if you dont have the drivers installed. //This also does not belong in the development section either. Best of luck
Click to expand...
Click to collapse
I have them installed.
.
94SupraTT said:
I have them installed.
Click to expand...
Click to collapse
Reinstall usb driver, check your usb cable, try to use another cable
Did u had debugging checked?
manu_ha2001 said:
Did u had debugging checked?
Click to expand...
Click to collapse
Having Debugging checked is not needed to get into Download mode or for using Odin.
94SupraTT said:
I have them installed.
Click to expand...
Click to collapse
Are you sure you have the ICS USB drivers installed? These are different than the old Froyo/GB drivers.
Shrivel said:
Are you sure you have the ICS USB drivers installed? These are different than the old Froyo/GB drivers.
Click to expand...
Click to collapse
ICS drivers... Lol... There's some funny stuff right there.
Samsung Windows drivers haven't changed in awhile for the Vibrant. Drivers are drivers for Odin
Sent from my GT-I9000 using XDA
It happen to me not long ago, and I tough my usb port was busted, and I fixed with a sharp and fine needle scraping the little usb pads very gently, my theory its that sometime got caught inside the usb port and somehow the cable wasn't making the right contacts.
fishman0919 said:
ICS drivers... Lol... There's some funny stuff right there.
Samsung Windows drivers haven't changed in awhile for the Vibrant. Drivers are drivers for Odin
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
He must be confusing boot loaders with drivers......I guess
What are you looking at shortbus......
I ended up just using a different version of Odin. 1.83 didn't want to see the phone. 1.3 did. I have no idea why but it worked. I flashed back to stock and then used AIO toolbox to flash root, cwm, and the ICS Gummy.
try to use other usb port if phone not detected again
I recently had to painstakingly cycle through 5-6 different Odin versions, 512 .pit files, and jfd .tar combinations before Odin passed. Had the same previously working odin 1.7, 512pit and jfd in a folder marked "WORKING ODIN", so I was a bit slow to accept that possibility haha.
//edit
most of the time i don't *****, but imagine how annoying 3 button combo resetting(including taking battery out) is when you have no hands
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
fishman0919 said:
ICS drivers... Lol... There's some funny stuff right there.
Samsung Windows drivers haven't changed in awhile for the Vibrant.
Click to expand...
Click to collapse
Which is why I had to use the drivers for the Nexus from the ICS SDK. When I upgraded to newer bootloaders, the old drivers from the Froyo SDK stopped working. I couldn't Odin/ADB/download mode. When I used the USB drivers from the ICS SDK, all was well again.
I've been using the same drivers for almost two years,Odining from Froyo to Eclair to ICS, back to Eclair,.........with no problem.
That includes flashing bootloaders back and forth, even though GB loaders are backwards compatible.
Sent from my SGH-T959 using Tapatalk 2
Keep trying different combos. My computer does that often. If phone goes into download mode it can't be the plug because bumbumbum.... the phone will not go into download if it doesn't get power from the USB.
Sent from my SGH-T959 using XDA
Hi fellows ,
Is there any further news about supporting OTG for galaxy s advance after installing the latest firmware ( jellybean) pz ??
Or , is there any idea for enabling such feature
thanks in advance
elemary said:
Hi fellows ,
Is there any further news about supporting OTG for galaxy s advance after installing the latest firmware ( jellybean) pz ??
Or , is there any idea for enabling such feature
thanks in advance
Click to expand...
Click to collapse
Really it ( USB OTG ) looks like a mystery for this Intelligent Mobile. If somebody Can add this, it will be great.
Still waiting for any further info about OTG
Quote : somebody told me that its supported after jb (the latest 4.1.2 RU ) but i'm not sure yet
Q: is there any special kernel for such feature ??
Hey Shut , waiting for ur best answers ... sorry man i just trust your reviews ^_*
thanks in advance
elemary said:
Still waiting for any further info about OTG
Quote : somebody told me that its supported after jb (the latest 4.1.2 RU ) but i'm not sure yet
Q: is there any special kernel for such feature ??
Hey Shut , waiting for ur best answers ... sorry man i just trust your reviews ^_*
thanks in advance
Click to expand...
Click to collapse
Shaaan told that someone need to modify kernel to have that support.
shut_down
Click to expand...
Click to collapse
is that modified kernel ready yet or no ?
Одг: [Q] Is there any further news about supporting OTG
O
elemary said:
is that modified kernel ready yet or no ?
Click to expand...
Click to collapse
What do you think, is it?
Sent from Galaxy S Advance
What do you think, is it?
Click to expand...
Click to collapse
i smell sarcasm here ^_*
a friend of me keep bugging about this feature
elemary said:
i smell sarcasm here ^_*
a friend of me keep bugging about this feature
Click to expand...
Click to collapse
Me too, smelling that.
Hmmm:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now ontopic. What do you think? Lot of people asking for OTG support, and no devs will post new thread with "Here I did it!!!" ?
And you probably think that is like geting in the car and starting it...
As i already said, vbus values need to be edited. The board needs to be configured to supply power to the usb socket AS WELL AS use the usb socket as a host.
It isn't that easy playing with voltage changes. One might fry teh chip.!
Sent from my GT-I9070 using xda premium
shut_down said:
Me too, smelling that.
Hmmm:
Now ontopic. What do you think? Lot of people asking for OTG support, and no devs will post new thread with "Here I did it!!!" ?
And you probably think that is like geting in the car and starting it...
Click to expand...
Click to collapse
Hehehe , Funny
Here I did it :silly:
Thanks man , i know you developers suffer lot
Thanks Again for Shaaan :good:
Shaaan said:
As i already said, vbus values need to be edited. The board needs to be configured to supply power to the usb socket AS WELL AS use the usb socket as a host.
It isn't that easy playing with voltage changes. One might fry teh chip.!
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Dear Shaaan, Does Galaxy S Advance hardware supports for USB OTG? If yes, then how could it be confirmed?
Is this post forgotten ?
Sent from my GT-I9070 using Tapatalk 2
The ux500 SoC supports OTG.
I do not respond to tech support via PM
On the site of ST Ericsson says it has the suport OTG U8500 BLOCK DIAGRAM: Confuso:
As far as I know, OTG requires kernel support. Cocafe mentioned something about trying to add it in future cocore versions.
My Device : Rooted GT-I9070
ROM - 4.1.2 Stock I9070DDULP8
Kernel - CoCore-E-6.2
Recovery - TWRP 2.5
I believe that is supported because the Xperia U has the same chipset NovaThor U8500 and already has support for OTG.
HeltonMax said:
I believe that is supported because the Xperia U has the same chipset NovaThor U8500 and already has support for OTG.
Click to expand...
Click to collapse
If you know how, provide our DEVs modifications that needed to be done for makeing it work.
harith.unnikrishnan said:
As far as I know, OTG requires kernel support. Cocafe mentioned something about trying to add it in future cocore versions.
Click to expand...
Click to collapse
In CoCore-E-6.8b usb has finally voltage output power, or at least so told Cocafe. I haven't tried yet. Sorry for my bad english...
Did you know that xperia t with stock ics support usb mass storage function with nokia ca 157 otg cable?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My 64Gb usb flash drive works perfectly via file explorer!!!!
Xperia T supports otg flash drives natively. So not only that otg cable works, but all otg cables work.
Sent from my LT30p (Xperia T) using XDA Premium.
Did I help? please press thanks button
Shouldn't this post be under accessories?
Sent from your backyard...
Slender watches what you do...
Just a quick FYI:
Works well with Xperia V with official JB... Tried quickly with 8gb usb stick.
And now for the clever people who use the search: Xperia V OTG cable works.
Sent from GTab LTE
_kankea said:
Just a quick FYI:And now for the clever people who use the search: Xperia V OTG cable works.
Click to expand...
Click to collapse
I know this post was from a long time ago, so I'm sorry to revive this one. But I do not have this model yet and I have the intention to buy it.
So my questions are:
1. For Xperia V, should be used the CA-157 cable or another one with an external power source to use an USB memory stick (I'm not referring to an HDD, which I'm sure is necessary an external source due to 1A current)?
2. Should be root-ed to be mounted an external memory (USB storage)?
ciubexx said:
I know this post was from a long time ago, so I'm sorry to revive this one. But I do not have this model yet and I have the intention to buy it.
So my questions are:
1. For Xperia V, should be used the CA-157 cable or another one with an external power source to use an USB memory stick (I'm not referring to an HDD, which I'm sure is necessary an external source due to 1A current)?
2. Should be root-ed to be mounted an external memory (USB storage)?
Click to expand...
Click to collapse
as long as you have a OTG cable everything should theoretically work OTB
oddeceed said:
as long as you have a OTG cable everything should theoretically work OTB
Click to expand...
Click to collapse
I asked above that because I tried to connect an USB memory stick to an Xperia Neo (MT15i) phone and without an external power, only mouses are working, was necessary to use an USB cable or micro USB hub with an external power to be recognized an USB memory stick.
ciubexx said:
I asked above that because I tried to connect an USB memory stick to an Xperia Neo (MT15i) phone and without an external power, only mouses are working, was necessary to use an USB cable or micro USB hub with an external power to be recognized an USB memory stick.
Click to expand...
Click to collapse
im not too sure to be honest as it is a feature i do not use or am required to use .... if you have the stuff there give it a test and let us know how you get on ?
I just bought one Xperia V and I tested with a simple OTG cable and it's working without any external power source.
I tested with an USB memory stick and with an USB SD card reader with an SD card inserted.
The external USB device is reported on the Settings -> Storage as: "USB storage".
The USB partition is mounted at: /usbdisk.
Is your Lenovo S2110 / Vodafone Smart Tab II 10 stuck at bootloop ? It's not bricked !!!
I found a way to unbrick the Lenovo 2110 / Vodafone smart tab II 10 !!! And it's incredibly EASY.
Warning! In case you have a 3g model you may lose 3g!
But it's a small price to pay for having your tablet back from brick , plus I'll be fixing this issue asap (read below)
You'll need:
A. a working rom image (https://yadi.sk/d/aE73bwtgesga2)
B. a Micro USB B Male to USB 2.0 A Female OTG Data Host Cable like this...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
C. an Usb memory stick
Procedure:
1. Copy the rom image (A) on an external Usb memory stick (C).
2. Connect the Usb external memory (C) to the tablet using the Usb cable adapter (B)
3. Boot the tablet in Recovery (hold Power btn + Vol down btn until the vibration)
4. The External Usb memory will be loaded OTG !
5. In the Recovery menu select ->Flash update from external card
6. Browse and select your rom image (A)
Confirm and after it flashes....reboot and enjoy your tablet reborn
A big thank you to steaven @ http://lenovo-forums.ru for providing the latest Lenovo rom!
:good:
PS.Coming from a Vodafone model, after this operation you may have "SIM card not found" error.
I'm looking for a modem.bin extracted from the original Vodafone Smart Tab II 10 rom to fix this!!!
Please contact me if you own one and want to help...the extraction is easily done via terminal
lenovo smartTab II 10
dev>null said:
Is your Lenovo S2110 / Vodafone Smart Tab II 10 stuck at bootloop ? It's not bricked !!!
I found a way to unbrick the Lenovo 2110 / Vodafone smart tab II 10 !!! And it's incredibly EASY.
Warning! In case you have a 3g model you may lose 3g!
But it's a small price to pay for having your tablet back from brick , plus I'll be fixing this issue asap (read below)
You'll need:
A. a working rom image (http://lenovo-forums.ru/Files/OS/Tablets/S2110/S2110_A403_045_F52_120716_ROW.zip)
B. a Micro USB B Male to USB 2.0 A Female OTG Data Host Cable like this...
C. an Usb memory stick
Procedure:
1. Copy the rom image (A) on an external Usb memory stick (C).
2. Connect the Usb external memory (C) to the tablet using the Usb cable adapter (B)
3. Boot the tablet in Recovery (hold Power btn + Vol down btn until the vibration)
4. The External Usb memory will be loaded OTG !
5. In the Recovery menu select ->Flash update from external card
6. Browse and select your rom image (A)
Confirm and after it flashes....reboot and enjoy your tablet reborn
A big thank you to steaven @ http://lenovo-forums.ru for providing the latest Lenovo rom!
:good:
PS.Coming from a Vodafone model, after this operation you may have "SIM card not found" error.
I'm looking for a modem.bin extracted from the original Vodafone Smart Tab II 10 rom to fix this!!!
Please contact me if you own one and want to help...the extraction is easily done via terminal
Click to expand...
Click to collapse
Hello sir,
I want to help but i dont know how to extract it,I have a lenovo smatTab II 10 and its vodafone,never been updated it to a newer firmware.
yoshiro3 said:
Hello sir,
I want to help but i dont know how to extract it,I have a lenovo smatTab II 10 and its vodafone,never been updated it to a newer firmware.
Click to expand...
Click to collapse
Thank you for your kind support yoshiro .
I already have received a couple of extractions...but can't get it to work as easily as I expected!
So we're stuck at the moment as I don't have too much time to dedicate to fix this
Do you have another link for this Firmware?
Tim35p07 said:
Do you have another link for this Firmware?
Click to expand...
Click to collapse
I also need the firmware. Any help would be greatly appreciated.
foornath said:
I also need the firmware. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Sure ! Firmware link in first post is updated, so you won't need to register in the russian forum :good:
Hi, how can i do it by fastboot mode? when i did flash alone system with boot i have "encryption unsuccesfull"?
PS Solved
I have the same problems. Mone is just displaying the weird Linux bird. Any help please guys.
RAW image link in OP is updated!