i have a milestone with the left part of screen not working, so also the back button doesnt work, someone has a solution?
pochopsp said:
i have a milestone with the left part of screen not working, so also the back button doesnt work, someone has a solution?
Click to expand...
Click to collapse
Ok my milestone have same problem
i think touch screen fail and replace new touch screen is the solution.
this morning it works again, let's hope that it will not break again.
Related
i can't recal my screen after a hard reset!
my touch screen was broken and i replaced it, flashing is a problem
because i've windows 7 and it gives an usb error any ideas??
normally the recalibrate screen turns up afther a hard reset, why not now??
dynamike19 said:
i can't recal my screen after a hard reset!
my touch screen was broken and i replaced it, flashing is a problem
because i've windows 7 and it gives an usb error any ideas??
normally the recalibrate screen turns up afther a hard reset, why not now??
Click to expand...
Click to collapse
Umm I've never had the calibrate screen come up on the Topaz since the day I bought it. Well accept for NRGZ28s ROMs. It should be pre-calibrated. Especially if your on the stock rom.
As far as windows 7 there were problems with earlier RC. What versions is yours? You should be able to flash once the Official Win7 is out.
settings > screen?
i've flashed it on a other pc,,but still no succes!
the calibratation screen doesn't come up!
even tried a different hardspl,,still no succes!
somebody know a rom whif screen calibration at the start up??
ArtieQ said:
settings > screen?
Click to expand...
Click to collapse
The stock Rome doesn't have that If I remember right. Only a few coocked ROMS do.
dynamike19 said:
i've flashed it on a other pc,,but still no succes!
the calibratation screen doesn't come up!
even tried a different hardspl,,still no succes!
somebody know a rom whif screen calibration at the start up??
Click to expand...
Click to collapse
Mebe your digitizer isn't right. Does it work? It just registers wrong? I'm really not clear on any of those.
NRGZ28s ROMs used to have the calibration. Mebe UDKs also. I know for a fact that Shadowlines has the calibrotor after start up. Go to Settings(in Manila)>All Settings>System>Screen It should be there. Or somewhere, I don't have my phone on me.
You've not been too clear on why it's so important to calibrate on the install process. Is your screen so mis-aligned that you can't use it? If you are able to use it then you can get to the screen calibration from settings - all settings - system - screen - alignment
Hope this helps
Marc
Make sure you've downloaded the latest Windows Mobile Device Centre for Windows 7. It fixes connectivity issues with the Topaz.
I'm also having the problem of not being able to calibrate the screen.
My digitizer broke and I have replaced it. Now it works, but it's so misaligned that I can't use the touchscreen to navigate. Therefore I need to flash a ROM that has the screen calibration to run upon boot, but I can't find a such ROM. Have tried the latest Shadowline, Energy, Nataly, official etc.
Does anyone know of a ROM with screen calibration upon boot? New or old doesn't matter, just need to calibrate the screen...
You put flex in not proper way in the socket, try flip flex upside down
losdrivare said:
I'm also having the problem of not being able to calibrate the screen.
My digitizer broke and I have replaced it. Now it works, but it's so misaligned that I can't use the touchscreen to navigate. Therefore I need to flash a ROM that has the screen calibration to run upon boot, but I can't find a such ROM. Have tried the latest Shadowline, Energy, Nataly, official etc.
Does anyone know of a ROM with screen calibration upon boot? New or old doesn't matter, just need to calibrate the screen...
Click to expand...
Click to collapse
Press VolUp+VolDown together and then tap on the screen.
Now you can calibrate your Screen.
I also had this problem after replacing the screen on my Trophy, but then I thought of cleaning the connector.
My new screen now looks great, and works perfectly.
thanks hansdampft, Vol up + vol down works perfectly, i can use my phone again!
Hi hope someone can help. Over the weekend my TD2 started playing up. All of the hardware buttons apart from the on/off button have stopped working. I also notice that if I turn the screen off with a short tap of the on/off button, after a few seconds it comes back on again. All touch screen functions are ok. It also appears to be draining the battery very quickly, to the extent that fully charged at bedtime (no bluetooth or wifi on and a stable 3-4 bar signal) it will be comppletely drained by morning. As far as I am aware the phone has not gotten wet at all.
I have also re-installed the office HTC rom, which made no difference
Any ideas??
So you reinstalled the stock rom and did a hard reset?
You can try Tarkim's Keyboard controller and see if your hardware keys can be mapped to a different function.
That would help eliminate hardware vs software issues.
I have the same problem. Also my backlight keeps working and won't go off. Can't perform a hard reset because my volume buttons(and all other hardbuttons accept the on/off) aren't working.
Searched for the solution but can't find it anywhere. Who can help me?
daanbrok said:
I have the same problem. Also my backlight keeps working and won't go off. Can't perform a hard reset because my volume buttons(and all other hardbuttons accept the on/off) aren't working.
Searched for the solution but can't find it anywhere. Who can help me?
Click to expand...
Click to collapse
Try clear storage app to HR.
Thanks for your reaction.
Yesterday I managed to put an official ROM on my phone.(latest from HTC site).
Problem only got worser. Phone gets complety stuck(directly after boot) in the volume screen. Sometimes its flashes back to the normal screen but only for 1 second. Buttons still aren't working so can't do anything with my phone right now( not even the hard reset methode you told me).
Started to think that this is really some hardware issue. Can't remember that water got in my phone or the phone felt really hard. Any solutions maybe?
Otherwise I think I just go to the store.
daanbrok said:
Thanks for your reaction.
Yesterday I managed to put an official ROM on my phone.(latest from HTC site).
Problem only got worser. Phone gets complety stuck(directly after boot) in the volume screen. Sometimes its flashes back to the normal screen but only for 1 second. Buttons still aren't working so can't do anything with my phone right now( not even the hard reset methode you told me).
Started to think that this is really some hardware issue. Can't remember that water got in my phone or the phone felt really hard. Any solutions maybe?
Otherwise I think I just go to the store.
Click to expand...
Click to collapse
One last thing you can try is a Task29 explained here.
Use your official rom (right click on .exe and extract the RUU_Signed.nbh and place in task29 folder, then connect device in Bootloader mode and run the Task29.exe. Follow the instructions in the link.
The device powers on. The buttons on the side and button work fine. The animations of the OS are working. I have tried a hard reset, soft reset, and standard power on/off. Does this mean I should try replacing the digitizer? Any ideas that I can get done by the end of the week before I go on vacation.
ddelella said:
The device powers on. The buttons on the side and button work fine. The animations of the OS are working. I have tried a hard reset, soft reset, and standard power on/off. Does this mean I should try replacing the digitizer? Any ideas that I can get done by the end of the week before I go on vacation.
Click to expand...
Click to collapse
I think, You need screen calibration
One easy thing to try: Place the palm of your hand on the screen. Hold it there for 10 seconds. See if it works now. Helps if your hands are warm.
I've had the same problem with screen. It helps if you put your palm over the screen but it's only temporary solution. Does anybody know what is the reason for this and what needs to be done/replaced.
Would appreciate any help.
Hi all!
First of all, I'm not sure if I'm doing everything right here, so excuse me if I'm doing something wrong
I'm new.
I've had my HTC One M7 from aliexpress.com for 2 weeks and 2 days now.
Have had great fun of it, nothing seemed wrong, was working perfectly. There were some rumours about an unofficial android-version that was put on this phone, which might be the problem..
Everytime I turn the phone screen on it thinks I hold/doubletap/tap/repeatedly tap the home button, and sometimes when I power it off it thinks I hold the volume down-button and takes a screenshot.. When I finally get to type my 4-digit pin code, it unlocks, goes to home screen, does the same again. Seems like my phone thinks I'm using the buttons..
I've changed settings (in a legit official way via Settings) of my home button to Hold for menu, Hold and swipe up for Google Search, and double-tap for recent apps..
Have tried factory reset twice, have tried rebooting it over and over, have tried almost anything.. I'm at the point of buying a new phone now, because I fear that HTC will not help me because it's an unofficial version of Android.. Any suggestions?
Everytime I open an app it just closes it and goes to home, sometimes before it does that it opens recent apps.. After that it just freezes and I can't touch it. Sometimes after waiting a couple of seconds, I can tap the screen and maybe it's fast enough to open for example WhatsApp, and then it just shuts off and does what I just stated.
Really weird!
I'm quite desperate. Could a custom ROM (Cyanogen or Android lollipop) fix this perhaps?
Please, help
Gr Patrick
ExcesusNL said:
Hi all!
First of all, I'm not sure if I'm doing everything right here, so excuse me if I'm doing something wrong
I'm new.
I've had my HTC One M7 from aliexpress.com for 2 weeks and 2 days now.
Have had great fun of it, nothing seemed wrong, was working perfectly. There were some rumours about an unofficial android-version that was put on this phone, which might be the problem..
Everytime I turn the phone screen on it thinks I hold/doubletap/tap/repeatedly tap the home button, and sometimes when I power it off it thinks I hold the volume down-button and takes a screenshot.. When I finally get to type my 4-digit pin code, it unlocks, goes to home screen, does the same again. Seems like my phone thinks I'm using the buttons..
I've changed settings (in a legit official way via Settings) of my home button to Hold for menu, Hold and swipe up for Google Search, and double-tap for recent apps..
Have tried factory reset twice, have tried rebooting it over and over, have tried almost anything.. I'm at the point of buying a new phone now, because I fear that HTC will not help me because it's an unofficial version of Android.. Any suggestions?
Everytime I open an app it just closes it and goes to home, sometimes before it does that it opens recent apps.. After that it just freezes and I can't touch it. Sometimes after waiting a couple of seconds, I can tap the screen and maybe it's fast enough to open for example WhatsApp, and then it just shuts off and does what I just stated.
Really weird!
I'm quite desperate. Could a custom ROM (Cyanogen or Android lollipop) fix this perhaps?
Please, help
Gr Patrick
Click to expand...
Click to collapse
This is purely a hardware issue. Your home button is somehow always in "on" position. Given it's a capacitive button, it could be the digitizer or a scratch on the home button area
donkeykong1 said:
This is purely a hardware issue. Your home button is somehow always in "on" position. Given it's a capacitive button, it could be the digitizer or a scratch on the home button area
Click to expand...
Click to collapse
Any idea on how to fix this?
This is somewhere about what I mean, read my reply also.
This might even be closer to what I mean.
Should I just send it back to HTC or can I fix this myself, with your heroic help?
ExcesusNL said:
Any idea on how to fix this?
This is somewhere about what I mean, read my reply also.
This might even be closer to what I mean.
Should I just send it back to HTC or can I fix this myself, with your heroic help?
Click to expand...
Click to collapse
Seems like just the thing I wrote. Considering it's a hardware issue you could replace the screen-digitizer assembly by yourself if you are familiar with that kind of work. I tried once on my old Desire and fried the motherboard, so I don't have cojones to do it [emoji6]
donkeykong1 said:
Seems like just the thing I wrote. Considering it's a hardware issue you could replace the screen-digitizer assembly by yourself if you are familiar with that kind of work. I tried once on my old Desire and fried the motherboard, so I don't have cojones to do it [emoji6]
Click to expand...
Click to collapse
Thanks for assisting me. I will bring it to a Chinese or turkish guy around here who will do it for cheap
Has anyone encountered a frozen screen?
Use the touch screen to malfunction. You can only press the power button again to lock the screen and unlock it:crying:.
hackjackyer said:
Has anyone encountered a frozen screen?
Use the touch screen to malfunction. You can only press the power button again to lock the screen and unlock it:crying:.
Click to expand...
Click to collapse
None as I'm concerned. You should get it replaced. Although it maybe something cause by static. Turn it off for 3o minutes or so and only use the provided cable. Give it a try.
hackjackyer said:
Has anyone encountered a frozen screen?
Use the touch screen to malfunction. You can only press the power button again to lock the screen and unlock it:crying:.
Click to expand...
Click to collapse
I have the same issue, I think is not a frozen screen, its the touch, try pressing volume keys and you will see that works. It happens several times at day, curiously that started after a Factory Reset, before never happened
Zisco0011 said:
I have the same issue, I think is not a frozen screen, its the touch, try pressing volume keys and you will see that works. It happens several times at day, curiously that started after a Factory Reset, before never happened
Click to expand...
Click to collapse
I went to Nokia after-sales service and they replaced the screen for free. Tell me the screen problem.
hackjackyer said:
I went to Nokia after-sales service and they replaced the screen for free. Tell me the screen problem.
Click to expand...
Click to collapse
Nice to hear it, please comment if the issue occur again. Regards.