SGS plus i9001 - bricked? - Galaxy S I9000 Q&A, Help & Troubleshooting

I dont have CWM installed. I can join only in Download Mode,
I am trying to install via PDA file with ODIN 1.85 it said:
ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013>
<ID:0/013> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-------------------------------------
When I try with Odin 4.43 it stocked at
<1> setup connection...
I have changed USB port on PC, nothing yet.

Did You installed Kies?
On what system are You trying to flash the phone?
On XP ODIN is not working, I flashed my i9001 with CWM on Windows 7 with ODIN and installed Kies without any problems.

aXiDroid said:
Did You installed Kies?
On what system are You trying to flash the phone?
On XP ODIN is not working, I flashed my i9001 with CWM on Windows 7 with ODIN and installed Kies without any problems.
Click to expand...
Click to collapse
Hello,
- I think thats my problem. I will try via Windows7 when I am ready too. I will reply.
Thank you.

No problem, just don't rush.
Flashing CWM takes a minute, after that the phone will reboot.
To enter to Recovery mode press Volume Up + Power and keep it pressed for 2 seconds after Samsung logo will appear.
BTW: If you encounter boot loop don't panic, just clear cache, data and dalvik and everything will be ok. I fixed boot loop on my phone by doing so.
edit: could you please press the THANKS button if I helped?

Are you using a pit file if so one correct for your device
Sent via that ninja standing right behind you

sider pyrgeds
Latrop said:
Are you using a pit file if so one correct for your device
Sent via that ninja standing right behind you
Click to expand...
Click to collapse
Hi,
- Yes I am using PIT file also but it stock at 'setup connection' with odin 4.43
- With odin 1.85 it said fail by this logs as below:
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013>
<ID:0/013> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed

Make sure you run Odin as admin and also try uninstalling device through device manager whilst its connected don't click delete driver software then unplug and replug also make sure you have full firmware to install should be a few files not just PDA in my experience
Sent via that ninja standing right behind you

aXiDroid said:
No problem, just don't rush.
Flashing CWM takes a minute, after that the phone will reboot.
To enter to Recovery mode press Volume Up + Power and keep it pressed for 2 seconds after Samsung logo will appear.
BTW: If you encounter boot loop don't panic, just clear cache, data and dalvik and everything will be ok. I fixed boot loop on my phone by doing so.
edit: could you please press the THANKS button if I helped?
Click to expand...
Click to collapse
Hi,
I cant run right now into CWM there is no CWM installed. Also I dont have SD Card on phone, is this problem?

Pretty sure cwm is either part of kernel or in some devices installed to system
Sent via that ninja standing right behind you

Latrop said:
Make sure you run Odin as admin and also try uninstalling device through device manager whilst its connected don't click delete driver software then unplug and replug also make sure you have full firmware to install should be a few files not just PDA in my experience
Sent via that ninja standing right behind you
Click to expand...
Click to collapse
You are right but it wont.
I am tryin to install this package: I9001XXKP4
PDA(PDA FILE), PHONE(Modem file), CSC (CSC FILE), PIT(PIT FILE) and Boot_loader
but its the same it stock.

Don't do bootloader I'm pretty sure and how long did you leave it cause once it took 15mins setup connection for me if you still don't prevail only option is try another computer
Sent via that ninja standing right behind you

You are talking about ClockworkMod, yes?
It replace Samsung's Recovery, if You flash it with ODIN there is no way it wouldn't run. Just turn the phone as I wrote before: Vol UP + POWER, and keep them pressed for 2, 3 seconds after Samsung logo appears. This will take you to recovery mode, and by so to CWM.
I'm using "recovery-clockwork-5.5.0.4-ariesve.tar", but the latest one is: "CWM6012-TOUCH-CM9-recovery". As far as I know for this moment.

There is the same also with Windows7 it won't flash.

noc1 said:
There is the same also with Windows7 it won't flash.
Click to expand...
Click to collapse
Have You installed Kies?
Download the newest, with is 2.3.3. Install it, reboot, put the phone in to download mode, turn the ODIN, select the files, connect the phone and hit the START button.
No way this wont work! I did so many times.

aXiDroid said:
Have You installed Kies?
Download the newest, with is 2.3.3. Install it, reboot, put the phone in to download mode, turn the ODIN, select the files, connect the phone and hit the START button.
No way this wont work! I did so many times.
Click to expand...
Click to collapse
I have installed Kies from official Web download samsung.
I am going to reboot now. And I will run again.
Thank you.

Latrop said:
Don't do bootloader I'm pretty sure and how long did you leave it cause once it took 15mins setup connection for me if you still don't prevail only option is try another computer
Sent via that ninja standing right behind you
Click to expand...
Click to collapse
I have wait about 18mins it stockat Setup connection..

Have you try to flash simple rom file onto the phone? Or Are you flashing the PDA file?
With "One Package" there shouldn't be any issues.

aXiDroid said:
Have you try to flash simple rom file onto the phone? Or Are you flashing the PDA file?
With "One Package" there shouldn't be any issues.
Click to expand...
Click to collapse
it doesn't work
can you please find me someone some pda or One package files for flash

noc1 said:
it doesn't work
can you please find me someone some pda or One package files for flash
Click to expand...
Click to collapse
You can download original newest Samsung's package from www.samfirmware.com - just create an account.
Download depends on Your country.
Download the file, use ODIN and select "One Package". Aries file will be needed to.

noc1 said:
I dont have CWM installed. I can join only in Download Mode,
I am trying to install via PDA file with ODIN 1.85 it said:
ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013>
<ID:0/013> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-------------------------------------
When I try with Odin 4.43 it stocked at
<1> setup connection...
I have changed USB port on PC, nothing yet.
Click to expand...
Click to collapse
For i9001 please refer to your WIKI http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001
you cannot use Odin 1.85, only Odin 4.43 with ariesVe.ops
IF "setup failed" in Odin its because KIES is running in system tray, you must shut it down for Odin to function
Open task manager and close:
Kies.exe
KiesTrayAgent.exe
KiesPDLR.exe
further reference refer to My Android Solutions link below

Related

Odin flash not proceeding, Android not booting

Well, I guess I messed my SGS up.
A short overview of what happened:
I tried to replace framework-res.apk on the official Froyo (rooted using OneClickRoot method) with one I modified. After deleting the original file I was unable to move the new one into its place as, despite me deleting a few ringtones, it kept stating that not enough space was available. So I decided to go into recovery mode, hoping I'd be able to fix this (I had a backup of the file on /sdcard/) I wanted via adb's shell from there. Well, su doesn't work in recovery mode ("Permission denied") and neither does adb remount ("remount failed: No such file or directory").
This is where the real trouble starts:
When I launch Odin3 (1.30), the phone seems to be recognised - if a yellow field with a COM port listed and "<ID:0/009> Added!!" in the message area is any indication. After selecting my PIT and PDA file and clicking Start, this is what Odin tells me:
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
Aaaand that's it. I have tried both with the 512 and 803 PIT and even tried flashing JPK onto it to no avail, it just stays stuck at SetupConnection.
I also wiped everything on the phone as well just to make sure nothing is interfering. Thanks to me messing with the framework-res.apk, adb can't be used while the phone is "running" Android (with a black screen and I suppose constant FC everywhere because of the vibrations).
I'm pretty much out of ideas right now after having tried for hours to revive my baby, but maybe one of you magicians out there can help me find something I haven't thought of yet?
Remove the battery and put i back.
Go to download mode.
Try again.
Sometimes you need to reinstall the drivers.
If you have more usb stuff locked up. Remove them. Odin is a little baby
Sent from my GT-I9000 using XDA App
DamianGto said:
Remove the battery and put i back.
Go to download mode.
Try again.
Sometimes you need to reinstall the drivers.
If you have more usb stuff locked up. Remove them. Odin is a little baby
Click to expand...
Click to collapse
Oh dear, thank you so much for having me read this again. Download mode != recovery mode, and volume up != volume down.
Flashing now, I'll update this if it turns out to be fixed. Derp.
/edit: Well, fixed it now. Thanks again
Liquidator said:
Oh dear, thank you so much for having me read this again. Download mode != recovery mode, and volume up != volume down.
Flashing now, I'll update this if it turns out to be fixed. Derp.
Click to expand...
Click to collapse
Hope it worked for you this time.
Sent from my GT-I9000 using XDA App

[Q] First time flasher here - Odin is not working

I am following these instructions as best as I can. When I load up the .tar file in the PDA section of Odin, all other boxes are left blank, repartition has no check mark, but when I hit start, nothing happens... it just sits there
<OSM> All threads completed. (succeed 0 / failed 0)
FIrst question, what do you want to flash ? from which version ?
EDIT: that post should be move to Q&A
Funkadelick said:
I am following these instructions as best as I can. When I load up the .tar file in the PDA section of Odin, all other boxes are left blank, repartition has no check mark, but when I hit start, nothing happens... it just sits there
<OSM> All threads completed. (succeed 0 / failed 0)
Click to expand...
Click to collapse
Seriously, far too many variables.
Have you a pit file?
Modem file?
CSC file?
Some you have to do repartition, others you dont?!?!
Have you kies installed & driver etc?
are you in download mode?
if you aint sure what your doin, seriously "READ UP"
http://forum.xda-developers.com/showthread.php?t=948232
have a lookie here for starters
stor3x said:
FIrst question, what do you want to flash ? from which version ?
EDIT: that post should be move to Q&A
Click to expand...
Click to collapse
No one is there to answer all the smart guys are here.
I'm on stock/vanilla 2.2 Froyo JL2 build for the Bell SMS i9000m
I am trying to flash the 2.2 Bell seeARMS ROM
I am having some issues with Odin, never really done this before. I loaded up the .tar file into the PDA section.
I need to get into the 2e recovery mode so I am trying to initially flash the Super Optimized kernal to get tbere.
I load the file into PDA make sure everything else is unchecked, including the repartition, hit start, nothing happens.
need advice - would the Kernal Flasher app work in this case ?
you need to get into download mode. 3e recovery. not 2e. Once you get into download mode then Odin will recognize SGS. Then you can do whatever you need to
you need download mode, so hold volume down, home and power together until download mode appears. after connect to the phone, odin should then recognise you have connected, showing a port number and a green (i think) bar
edit.
you add your pda file and make sure you have repartition unchecked. then flash away!
bristolian said:
you need download mode, so hold volume down, home and power together until download mode appears. after connect to the phone, odin should then recognise you have connected, showing a port number and a green (i think) bar
edit.
you add your pda file and make sure you have repartition unchecked. then flash away!
Click to expand...
Click to collapse
I'm already in download mode
is it kies? I remove/uninstalled KIES before doing this
should I have to install it again ?
Ok so I got odin to recognize it - it was a matter of rebooting - and now I see the first 2 boxes in oden as yellow - and 2 added
0:[COM9] 1:[COM3]
<ID:0/009> Added!!
<ID:1/003> Added!!
why is there 2 added ? In videos i usually only saw one .. please explain
I've just recently got my girlfriend a galaxy s and gone thru the process of sim unlocking, rooting and flashing a new ROM. I have to say that although the actual process isn't that bad when you know what you're doing, the organisation of the galaxy forum seems all over the place. I found myself jumping back and forward and reading all sorts of different methods before figuring it out. Much harder to find all the info than any of the other phones I've had.
Sent from my Desire HD using XDA Premium App

Phone stuck in download mode and PC won't recognize device..PLEASE HELP!!!

I've flashed my phone plenty of times, but this time I accidentally installed something that screwed it up bad. My phone at first was either stuck on the at&t logo, or if plugged in would be frozen on the battery pre-loader. I needed to get it in download mode to try to re-flash it, but I couldn't even do that. After a million trys I finally bought a usb jig which helped me get into download mode, but now my computer does not recognize my phone as a device when I run ADB DEVICES under the android sdk.
I'm assuing since adb devices comes up with nothing under list of devices attached is why odin3 isn't working. When I try to run it all I get is various messages such as the following and my phone either gets stuck on the downloading screen, or I get a blue screen.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
Any help would be appreciated!
^
Did u read this thread ?? ---- Captivate Connection Issues and Download Mode Help
---- See this section when u get to that thread...UNIVERSAL FIRST STEPS FOR CONNECTION ISSUES -- Hopefully that will help ya.
.
Thanks. Yes I did read that thread and that's what helped me get ODIN to see my phone, but where I'm confused is ODIN is showing 0:[COM4], but when I run ADB DEVICES in CMD PROMPT it doesn't list my IMEI number for a device being shown. Also, ODIN constantly gets stuck on different steps and either my screen will turn either all green, blue, purple, etc, or my screen just turns black. I'm closer than I was the other day since I bought the USB jig, but I am stuck at a point now where I can't tell if there is hope or not!
4-2ndtwin said:
^
Did u read this thread ?? ---- Captivate Connection Issues and Download Mode Help
---- See this section when u get to that thread...UNIVERSAL FIRST STEPS FOR CONNECTION ISSUES -- Hopefully that will help ya.
.
Click to expand...
Click to collapse
The "adb devices" command won't show ur device if u r in Download Mode. And if Odin is seeing ur phone (com port lit up), then it still sounds like u need to reboot ur computer, right click and run Odin as administrator, connect the usb end or ur cable to the a usb port on the back of the desktop computer or 1st usb port on laptop, then connect micro usb end to ur phone. If that doesn't work try a differnent port. If that doesn't work try a different cable (sometimes the one u think is good because u just used it the other day...will be bad). And in ur situation right now, I would not be flashing something with Bootloaders in it.
Thanks. Didn't know that about adb devices. I've tried various ports and installing and uninstalling drivers, but anytime Odin starts to work it freezes. I had just went from serpendity to cm7 and then I accidentally loaded an old flash from February so I don't know what was on the phone when it bricked. What tools exactly should I be using and get it from there?
4-2ndtwin said:
The "adb devices" command won't show ur device if u r in Download Mode. And if Odin is seeing ur phone (com port lit up), then it still sounds like u need to reboot ur computer, right click and run Odin as administrator, connect the usb end or ur cable to the a usb port on the back of the desktop computer or 1st usb port on laptop, then connect micro usb end to ur phone. If that doesn't work try a differnent port. If that doesn't work try a different cable (sometimes the one u think is good because u just used it the other day...will be bad). And in ur situation right now, I would not be flashing something with Bootloaders in it.
Click to expand...
Click to collapse
Which Odin and Firmware are u trying to use. And do you have the .pit file, because since u went to CM7, u will need to include the .pit file and Repartition.
Here is the .pit file below. Take it out of the .zip and select PIT in Odin and navigate to where u put it on ur PC and select it. Then the repartition box should be automatically checked. Include this .pit file with ur other Stock firmware u r trying to flash (gingerbread i presume. This is a .pit that came with the kf1 i897 gb firmware).
Which Serendipity were u running. That will let u know what Bootloaders u have, either Gingerbread or not.
View attachment Kepler_odin_new_part_JE3_S1JE4.zip
I was literally in the same boat the past few days. The only thing that saw and properly flashed was this. (search it)
"SGH-i897-UCKH3-One-Click"
I had serpendity 6.4 on it and the android version was 2.2 and the cm7 was 2.3.7. I think I'm using odin 1.81 I believe; I honestly don't know which one I should be using and thanks for the .pit file! But as far as stock rom or whatever it may be where do I get that? I just don't know what the correct files I need with which Odin so it works right!
Since u were on froyo, check out the link in my sig to the i897uckb1.
I am out away from my laptop right now, but in that thread should be everything u need, but u need a froyo .pit file not the one i had attached. There may be one attached in that kb1 thread. U definately need to repartition when u flash though. And that should get u straightened out.
Sent by XDA Premium App
I've had a similar problem, though never needed a jig. For me, it was definitely the USB port I was using. I was able to get it on maybe the fourth attempt on the bad port.
Try using the drivers and one click from this thread to take you back to stock http://forum.xda-developers.com/showthread.php?t=731989
I'd also suggest using a different machine. The rear Ports on a desktop are best. I read why one time but don't ask me to remember it right now.
Ok it now was successful with using ODIN, but after the restart it goes to the Android system recovery screen and says:
update media, please wait
E: Can't mount /dev/block/stl10
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI menu for format and reboot actions.
copy default media content failed.
What firmware did u flash and did u repartition ??
Well I got past that, but there appears to be no rom or anything installed because there is nothing on my SD card and I'm stuck on the clockworkMod Recovery screen. Anyway to get my update.zip file to the sdcard somehow?
Now it's on the CWM-based Recovery screen (cyanogenmod) and I don't know what to do now to actually get to the phone. I don't know what I am missing or where to get it.
Answer my previous post and maybe I can help. And in what direction are u wanting to go as far as flashing firmware is concerned ?
Used I897UCKB1-homeBinary.tar and yes I repartitioned.
I wanted to try to use what I started using before I bricked my phone. I wanted to use cyanogenmod 7.1 that had gingerbread 2.3.7 on it. Right now it boots up showing the cyanogenmod logo but never goes past the cwm-based recovery v5.0.2.6 screen.
Just select to install the CM7 again through the CWM Recovery. You may have to format system, wipe data/factory reset in cwm first. Then after it installs and goes back into cwm recovery, just select reboot.
You mean just run the update.zip file again? If that's what you meant I did that and wiped/formatted like you said, but it still just boots back into cwm. Obviously I am doing something wrong.
Reinstall cyanogenmod 7.1 and after it installs it may boot back into recovery. If it does just select the reboot system now.

[Q] Galaxy Note Stuck at Boot Screen

Hi I just decided to change my custom firmware to darkynote from rocketrom. It worked perfectly but I wanted to update my kernal also so afterwards i rebooted into recovery and installed version 2.6 of Abyss Note. Now My phone boots to the "Samsung Galaxy Note N7000" Screen and stays there unless i plug it in, then when i start it it goes to a frozen battery screen. I cant boot into recovery but i can boot into download mode. Can someone help me get my phone back to stock? I can't seem to find a tutorial anywhere that will work for me.
please help
edit: extra details, the Odin3 v1.85 process gets stopped at NAND Write Start!!
Here is the message feed:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKL7_N7000OXAKL7_N7000XXKL7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> factoryfs.img
<ID:0/006> NAND Write Start!!
Also tried using CF-Root kernal. no luck there. The Bar in Odin says KERNEL and the green bar is full, also stuck at NAND Write Start!!.
Someone respond, im gonna cry.
First Relax man, dont be in hurry, read this guide twice/thrice n calmly proceed...
It is nice still you can entre to download mode.
First get Stock firmware from here Type N700 in search field, it will show all available firmware, select you wish to flash n download
Note : If you select latest ROM KL7, you won't get Root + CWM, for that you have to Flash another ROM first, then You have to Root + CWM,then Install Mobile odin pro, now flash KL7 with Mobile Odin pro with 'ever root' option enable. If you selecting another ROM, ignore this note
Get odin n extract
Install:
Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly.
Extract tar file from the ROM you have download(password available at site from you have download). Put the phone into download mode (vol. down+home+power buttons),
Comlete close kies, if open. start odin, connect the phone via USB. Choose continue on the phone,
make sure that only two boxes are checked in odin - Auto Reboot and F.Reset Time.
Choose PDA button in Odin and select tar file you extracted before.
Choose START button.
The phone will reboot after the flash. Done.
Alright sounds good but i left it at the NAND write start thing overnight and when i came back it said this:
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Now I have a black screen and its flashing on and off with the frozen battery symbol. I think the battery is drained or something.
Also my download of the rom finished, there isnt any tar files its just a zip with an MD5 file and a Dll. Should i just but the MD5 file in the PDA section?
Edit: now my phone wont do anything when i try to put it in download mode.
Anyway if you are still able to entre Download mode, then try to flash stock kernel as i said above.
But thats what I mean, is it possible for the phone to not boot into download because the battery is dead or is my phone just bricked forever $850 dollars out the window.
tangelos said:
I cant boot into recovery but i can boot into download mode.
Click to expand...
Click to collapse
Actually i dont understand properly, your first post said U R getting into DW mode, if you can entre into boot mode, i guide you earlier, i cant say it bricked.
many time this happen after some error in procedure.
If you even not able to entre into Download mode, you need to entre it with JIG.
dr.ketan said:
Actually i dont understand properly, your first post said U R getting into DW mode, if you can entre into boot mode, i guide you earlier, i cant say it bricked.
many time this happen after some error in procedure.
If you even not able to entre into Download mode, you need to entre it with JIG.
Click to expand...
Click to collapse
Actually I was just updating you. At first it was working, then i tried a tutorial simmilar then the one you just gave me and it caused the phone to not turn on whatsoever. Can you link me to one of these "jigs". Thanks
You can get it readymade from market e.g. ebay or you can make it own home made
see here http://forum.xda-developers.com/showthread.php?t=819551
better first try with other battery once, if you cud manage
I was able to get a hold of one locally. When I plug it in, nothing happens. Any advice? Its for a GSII. Is that why? Or is it the battery thing. Before it stopped working completely, when i booted into download it would say low battery. Looks like its game over for my new phone .
I tried this with an old usb cable http://forum.xda-developers.com/showthread.php?p=20914895#post20914895.
Inserted the USB Jig afterwards. No luck
I suppose i have to take it to be J-tagged: http://toronto.kijiji.ca/c-buy-and-...-JTag-Service-Phone-Unlock-W0QQAdIdZ341742939
I'm sorry if this is not helping, or being so late, but I wanted to share my experience.
So, now can you enter the recovery menu by pressing the 3 buttons?
if you can then do a factory reset/wipe from the recovery and then flash an entire flashable ROM, maybe a stockROM or ROCKETROM.
you can upload ROCKETrom from the ordinary windows explorer , just copy and paste to the ex.SD.
the looping android animation actually happened to mine, and that's how I fixed it.
BTW: I didn't use Odin at all, or any other program.
Thanks for trying to help but this is completely irellavent. My phony CAN'T get into recovery and it NO LONGER CAN even get into Odin (download mode). I guess I wasn't clear when posting. Is anyone aware of a hardbrick fix or if sammy will repair ,my phone for a price.
Hi buddy. The EXACT same happened to be when trying to flash RocketV16. Frozen charge screen and everything.
To sort it I first let the phone start and hang on the black/white writing splash screen, removed the battery while it was on, held down the power button without the battery in for 3-5 seconds, put the battery back in. I then held Vol Down, the Home button and then the power down button (hold down power last) for some seconds until the Odin-Mode downloader came up.
After that I just followed a guide on flashing with Odin.
No more £9999999999 brick
unfortunatly i cant try that stratagy because i cant even get to the splash screen anymore. + i gave it to a local guy who claims to be able to jtag it. If it doesnt work ill send it to samsung and of course pay because i voided my warrenty. oh well. better then my old i9000m.
Galaxy Note N7000 Screen
I hate to hijack your thread but what I have to ask directly relates to your issue.
I have been searching for any file that contains this actual GALAXY Note Boot Screen - I am looking for this image file with the hope of making this my sole wallpaper/background. If there is anyway you or those who are reading this can PLEASE attach the file or at the very least provide a link so I 'd be able to download it for myself. I'd sincerely appreciate any help I can get.
I'm willing to pay ANY PERSON WHO PROVIDES A HIGH QUALITY IMAGE HOPEFULLY ALREADY SIZED FOR IMMEDIATE USE.
I'm sorry - please don't take this message as that of "shouting", My hope was to capture readers attention. Again, I apologize in advance for anyone having taken this message as shouting. That was not my intent.
Jim
connection
hey,i don't get how u manage to transfer stock firmware into the phone when pc cannot detect any file from the note???is it using odin??if yes,may someone share how to connect the phone to the pc via odin??
---------- Post added at 07:37 PM ---------- Previous post was at 07:27 PM ----------
hey how you manage to upload rocket rom,my pc cannot detect any file from my phone..even simple window explorer does not turn up..i hope u may help me...
me too Stuck at Galaxy Note Boot Logo
dr.ketan said:
First Relax man, dont be in hurry, read this guide twice/thrice n calmly proceed...
It is nice still you can entre to download mode.
First get Stock firmware from here Type N700 in search field, it will show all available firmware, select you wish to flash n download
Note : If you select latest ROM KL7, you won't get Root + CWM, for that you have to Flash another ROM first, then You have to Root + CWM,then Install Mobile odin pro, now flash KL7 with Mobile Odin pro with 'ever root' option enable. If you selecting another ROM, ignore this note
Get odin n extract
Install:
Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly.
Extract tar file from the ROM you have download(password available at site from you have download). Put the phone into download mode (vol. down+home+power buttons),
Comlete close kies, if open. start odin, connect the phone via USB. Choose continue on the phone,
make sure that only two boxes are checked in odin - Auto Reboot and F.Reset Time.
Choose PDA button in Odin and select tar file you extracted before.
Choose START button.
The phone will reboot after the flash. Done.
Click to expand...
Click to collapse
Dr Ketan,I have mentioned the same in your other thread about stucking at Galaxy Note Boot Logo forver.
I was on CheckRom v6 and then i went to flash a kernel and then got stuck at Galaxy Note Boot Logo.
I am not able to got to recovery mode by pressing power+home and vol+,but I can go to Download mode by pressing power+home and vol-.so i went to desktop Odin and tried flashing one of the rom(Dr Ketan Guide to Rooting).Seems like Odin was succesful but still stuck at Galaxy Note Boot Logo.
please need help here,I hope my Galaxy Note is not Bricked!
Try flashing a cf root kernel back
Sent from my GT-N7000 using XDA
Remkve battery for few min, thn put it back n try to enter recovery
If you able to enter recovery wipe cache n wipe data, thn reflash rom with pc odin.
Sent from my GT-N7000 using xda premium

[Q] Cannot run my S I9000

Hi there!
I got this samsung galaxy s i9000 and i was using miui rom. there were a few things i didn't like so i wanted to switch to some other but when i turned of my mobile and used 3 buttons combo it only loaded to a downloading mod with this big yellow sign and was stucked there. so i wanted to turn it on normally but it only shows the galaxy s logo and afterwards screen with "powered by mackay kernel" and that cycles.
Is there a chance that me removing clockwork mod could cause that?
Need to fix that as soon as possible. Any advices?
AW: [Q] Cannot run my S I9000
The yellow triangle is the download mode and it's like fast boot mode on other device. It's a default feature.
If you are stucked a reboot you could try to pull the battery out for example 5min and wait, normally it fixes itself.
Sent from my Nexus 7
yes i read that a lot but it didn't work... even after half an hour i tried to turn it back on and it cannot load itself... and i have no internet connection either by t-mobile
also when i was inastaling miuis rom i used the 3B combo and it opened some sort of text mod where i chose to install it now it don't happen
Odp: [Q] Cannot run my S I9000
joasisk said:
yes i read that a lot but it didn't work... even after half an hour i tried to turn it back on and it cannot load itself... and i have no internet connection either by t-mobile
also when i was inastaling miuis rom i used the 3B combo and it opened some sort of text mod where i chose to install it now it don't happen
Click to expand...
Click to collapse
That text mod is called recovery mod. Press VolUp + Home + Power buttons. Then you may try to install rom again and reboot, after that phone should run.
AndroidCi said:
That text mod is called recovery mod. Press VolUp + Home + Power buttons. Then you may try to install rom again and reboot, after that phone should run.
Click to expand...
Click to collapse
problem is that i cannot get there it does the same thing as if i try to turn it on normally - cycling between samsung logo screen and mackay kernel screen
joasisk said:
problem is that i cannot get there it does the same thing as if i try to turn it on normally - cycling between samsung logo screen and mackay kernel screen
Click to expand...
Click to collapse
If you can reach the download mode, you should try to change your kernel via Odin. I don't know what kind of kernel you can use with your ROM but I'm pretty sure you can change it.
If it doesn't work with changing the kernel, try to change your ROM via Odin with download mode.
You need to have safe base.
If you have a problem with getting to cwm through 3-button combo try this:
pull out your battery, press vol up + home + power and insert battery, when your screen get on instantly release buttons.
From some time that's the only way to get into CWM on my SGS.
ok so i tried to flash odinrecovery but odin got stucked at nand write start...
joasisk said:
ok so i tried to flash odinrecovery but odin got stucked at nand write start...
Click to expand...
Click to collapse
What about flashing a new kernel? Not a recovery.
And did you try kronos111's method?
kronos111 said:
If you have a problem with getting to cwm through 3-button combo try this:
pull out your battery, press vol up + home + power and insert battery, when your screen get on instantly release buttons.
From some time that's the only way to get into CWM on my SGS.
Click to expand...
Click to collapse
didn't work now it don't even get to that loop it is stucked on black screen only able to get to download mode
Tell me more about your ROM.
What is your Android version? Your kernel? And what's the name of your ROM?
Cassis1978 said:
Tell me more about your ROM.
What is your Android version? Your kernel? And what's the name of your ROM?
Click to expand...
Click to collapse
I had MIUIs rom it was flashed in december but i don't remember the version and i had mackay kernel
Go into download mode and flash your miui kernel once again as PDA - odin or haimdall. If your phone still doesn't boot than you'll have to flash 3-file GB with pit and re-partition. I use JW1 for this kind of reseting system
kronos111 said:
Go into download mode and flash your miui kernel once again as PDA - odin or haimdall. If your phone still doesn't boot than you'll have to flash 3-file GB with pit and re-partition. I use JW1 for this kind of reseting system
Click to expand...
Click to collapse
actually i cannot find any kernel in .tar or any manual which files from zip should i put in tar file
i suppose you had JB MIUI so you can use semaphore kernel if it was 4.1 use 2.6.5 if 4.2. latest version
kronos111 said:
i suppose you had JB MIUI so you can use semaphore kernel if it was 4.1 use 2.6.5 if 4.2. latest version
Click to expand...
Click to collapse
got this with booth of them
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
than nothing
change USB port, connect cable directly to motherboard (no USB hub)
kronos111 said:
change USB port, connect cable directly to motherboard (no USB hub)
Click to expand...
Click to collapse
using laptop no hub after about half an hour i got
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
failed also on other port
heimidal don't even recognize the phone when i connect it...
phone only turns into downloading mod now anithing else... :crying:
joasisk said:
heimidal don't even recognize the phone when i connect it...
phone only turns into downloading mod now anithing else... :crying:
Click to expand...
Click to collapse
It seems that Odin recognizes your phone.
Do you have Kies on your computer?

Categories

Resources