Hi there!
I got this samsung galaxy s i9000 and i was using miui rom. there were a few things i didn't like so i wanted to switch to some other but when i turned of my mobile and used 3 buttons combo it only loaded to a downloading mod with this big yellow sign and was stucked there. so i wanted to turn it on normally but it only shows the galaxy s logo and afterwards screen with "powered by mackay kernel" and that cycles.
Is there a chance that me removing clockwork mod could cause that?
Need to fix that as soon as possible. Any advices?
AW: [Q] Cannot run my S I9000
The yellow triangle is the download mode and it's like fast boot mode on other device. It's a default feature.
If you are stucked a reboot you could try to pull the battery out for example 5min and wait, normally it fixes itself.
Sent from my Nexus 7
yes i read that a lot but it didn't work... even after half an hour i tried to turn it back on and it cannot load itself... and i have no internet connection either by t-mobile
also when i was inastaling miuis rom i used the 3B combo and it opened some sort of text mod where i chose to install it now it don't happen
Odp: [Q] Cannot run my S I9000
joasisk said:
yes i read that a lot but it didn't work... even after half an hour i tried to turn it back on and it cannot load itself... and i have no internet connection either by t-mobile
also when i was inastaling miuis rom i used the 3B combo and it opened some sort of text mod where i chose to install it now it don't happen
Click to expand...
Click to collapse
That text mod is called recovery mod. Press VolUp + Home + Power buttons. Then you may try to install rom again and reboot, after that phone should run.
AndroidCi said:
That text mod is called recovery mod. Press VolUp + Home + Power buttons. Then you may try to install rom again and reboot, after that phone should run.
Click to expand...
Click to collapse
problem is that i cannot get there it does the same thing as if i try to turn it on normally - cycling between samsung logo screen and mackay kernel screen
joasisk said:
problem is that i cannot get there it does the same thing as if i try to turn it on normally - cycling between samsung logo screen and mackay kernel screen
Click to expand...
Click to collapse
If you can reach the download mode, you should try to change your kernel via Odin. I don't know what kind of kernel you can use with your ROM but I'm pretty sure you can change it.
If it doesn't work with changing the kernel, try to change your ROM via Odin with download mode.
You need to have safe base.
If you have a problem with getting to cwm through 3-button combo try this:
pull out your battery, press vol up + home + power and insert battery, when your screen get on instantly release buttons.
From some time that's the only way to get into CWM on my SGS.
ok so i tried to flash odinrecovery but odin got stucked at nand write start...
joasisk said:
ok so i tried to flash odinrecovery but odin got stucked at nand write start...
Click to expand...
Click to collapse
What about flashing a new kernel? Not a recovery.
And did you try kronos111's method?
kronos111 said:
If you have a problem with getting to cwm through 3-button combo try this:
pull out your battery, press vol up + home + power and insert battery, when your screen get on instantly release buttons.
From some time that's the only way to get into CWM on my SGS.
Click to expand...
Click to collapse
didn't work now it don't even get to that loop it is stucked on black screen only able to get to download mode
Tell me more about your ROM.
What is your Android version? Your kernel? And what's the name of your ROM?
Cassis1978 said:
Tell me more about your ROM.
What is your Android version? Your kernel? And what's the name of your ROM?
Click to expand...
Click to collapse
I had MIUIs rom it was flashed in december but i don't remember the version and i had mackay kernel
Go into download mode and flash your miui kernel once again as PDA - odin or haimdall. If your phone still doesn't boot than you'll have to flash 3-file GB with pit and re-partition. I use JW1 for this kind of reseting system
kronos111 said:
Go into download mode and flash your miui kernel once again as PDA - odin or haimdall. If your phone still doesn't boot than you'll have to flash 3-file GB with pit and re-partition. I use JW1 for this kind of reseting system
Click to expand...
Click to collapse
actually i cannot find any kernel in .tar or any manual which files from zip should i put in tar file
i suppose you had JB MIUI so you can use semaphore kernel if it was 4.1 use 2.6.5 if 4.2. latest version
kronos111 said:
i suppose you had JB MIUI so you can use semaphore kernel if it was 4.1 use 2.6.5 if 4.2. latest version
Click to expand...
Click to collapse
got this with booth of them
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
than nothing
change USB port, connect cable directly to motherboard (no USB hub)
kronos111 said:
change USB port, connect cable directly to motherboard (no USB hub)
Click to expand...
Click to collapse
using laptop no hub after about half an hour i got
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
failed also on other port
heimidal don't even recognize the phone when i connect it...
phone only turns into downloading mod now anithing else... :crying:
joasisk said:
heimidal don't even recognize the phone when i connect it...
phone only turns into downloading mod now anithing else... :crying:
Click to expand...
Click to collapse
It seems that Odin recognizes your phone.
Do you have Kies on your computer?
Related
I woke up this morning and my phone won't turn on! I hold down power and see the Samsung splash screen... then the display goes off and nothing happens. I can't launch into recovery mode... I can launch into Download Mode, but can't do anything from there... (no response to any buttons)
I tried pulling out the battery and SIM - to no avail...
I am running a rooted Bell phone with the lag fix.
Please give me suggestions! What do I need to do to recover this using my PC and adb?
Time to recharge your SGS?
Before i give you the bad news
try Flashing the phone with Odin, see if you can complete a successful flash
However you'll most likely see an Odin error concerning mounting the drive, your Internal SD drive is most likely dead, and it'll need to be replaced by Samsung/Bell service center.
there are many known cases like this related to the lag fix
slaman said:
I woke up this morning and my phone won't turn on! I hold down power and see the Samsung splash screen... then the display goes off and nothing happens. I can't launch into recovery mode... I can launch into Download Mode, but can't do anything from there... (no response to any buttons)
I tried pulling out the battery and SIM - to no avail...
I am running a rooted Bell phone with the lag fix.
Please give me suggestions! What do I need to do to recover this using my PC and adb?
Click to expand...
Click to collapse
atan.ismail said:
Time to recharge your SGS?
Click to expand...
Click to collapse
It's fully charged... it was charging all night. What's weird is that I've plugged it in and it's flashing the battery symbol.... I can't turn off the screen - it keeps flashing this symbol
slaman said:
It's fully charged... it was charging all night. What's weird is that I've plugged it in and it's flashing the battery symbol.... I can't turn off the screen - it keeps flashing this symbol
Click to expand...
Click to collapse
if you hold the power button, does it turn on at all?
how far does it go into the boot process?
does it get stuck after the pretty Galaxy S swirling logo?
AllGamer said:
if you hold the power button, does it turn on at all?
how far does it go into the boot process?
does it get stuck after the pretty Galaxy S swirling logo?
Click to expand...
Click to collapse
I don't get the swirling logo... I just get the static splash page "Samsung Galaxy S" - it stays for about a second, then the screen goes black.
I'm trying to figure out what to do once I'm in download mode... I have Samsung Kies (which won't detect it...) and Odin (which won't detect it)
slaman said:
I don't get the swirling logo... I just get the static splash page "Samsung Galaxy S" - it stays for about a second, then the screen goes black.
I'm trying to figure out what to do once I'm in download mode... I have Samsung Kies (which won't detect it...) and Odin (which won't detect it)
Click to expand...
Click to collapse
that doesn't sounds right
try installing Odin on another machine
seems like the PC you are trying to use has the USB port locked up.
i've had that happen on mine before
if you turn off the PC, remove the power cord
power it on, then put the power cord
and power it on again
that should reset it
Ok, Odin seems to recognize the phone (it installed all the drivers when it was in Download Mode) - I clicked "start" and got the following:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> Removed!!
then the phone went back into the flashing battery symbol... I need to grab the official Bell Samsung Galaxy S .pit file I guess.
Samsung Kies just sat there trying to connect when the phone was in Download Mode...
Okay, so I've downloaded the 0803.pit file... I just need to know which firmware to flash it with under PHONE, PDA, CSC, and DUMP...
Would really appreciate the help!
JH2 firmware for all 3 and flash with correct pit file and click partition (but will wipe all data).
rmanaudio said:
JH2 firmware for all 3 and flash with correct pit file and click partition (but will wipe all data).
Click to expand...
Click to collapse
I found the thread for JH2, but none of the links in it work!
http://forum.xda-developers.com/showthread.php?t=755063
Got one that you can spare?
Also, 0803.pit works for JH2 right?
Really appreciate your help!
I'm just going to try to find JG9 and upgrade via Samsung Kies... that's if I can find JG9 - these are so hard to find!
Hi Mate,
I just had the same problem - could not reboot from normal recovery, could not reboot from clockworkmod recovery. I had to launch nandroid recovery.
On my unit, it seems that the problem was caused by a conflict between setcpu profiles and the alter minfree settings from ryanza's oclf.
If you have clockworkmod installed and have backed up your rom, you should be able to use nandroid recovery.
I have now changed setcpu not to run on boot, and have not used alter minfree - prob seems to be sorted.
Hope this helps (you or somebody else).
Regards, Paul.
Go here to download firmware: http://www.samfirmware.com/firmwares.htm
rmanaudio said:
Go here to download firmware: http://www.samfirmware.com/firmwares.htm
Click to expand...
Click to collapse
Saw that.. but there's no I-Series... I can't see any firmwares for Samsung Galaxy S there - am I blind?
EDIT: Found it - thanks.
This JH2 on his site is the "updated" version of JH2 that fixes the 3-button recovery as per the Facebook page right?
http://www.facebook.com/note.php?note_id=10150262535205538&id=260085296049
or is this the "earlier" version of JH2?
http://www.multiupload.com/ZNBT2RY5Y0
Use 512 pit file.
http://samfirmware.webs.com/samsungandroid.htm
Top left, just had to click on "android phones" to get here... good luck!
slaman said:
Saw that.. but there's no I-Series... I can't see any firmwares for Samsung Galaxy S there - am I blind?
Click to expand...
Click to collapse
It is there...dont look for I series...click on Android. Then grey area for america files.
Got the file... tried to update through Odin... and it's stuck on the following for 15 minutes...
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> zImage
The phone still shows Download mode.
Do I need Odin v1.3 or is Odin v1.0 sufficient? Using PIT0512
EDIT: Pulled out battery... tried again... now see blue status bar moving along the bottom... fingers crossed that this works!
It completed... and same thing is happening. Can't start it up...
I tried to install stock rom after CM9 was installed in my device.
odin got stuck in the middle and after that when I tried to open the device I was stuck in the "galaxy note N-7000" screen, and it wouldnt go into recovery, only to download mode.
when I tried to use odin again it got stuck in:
<ID:0/011> NAND Write Start!!
so I read this thread:
http://forum.xda-developers.com/showthread.php?t=1607011&highlight=nand+write+start
so I tried to flash the PIT file and odin got stuck again.
after that I pulled the battery out and now the power button wont do anything!
not even the smallest light on the screen.
I also tried to use combination with volume and home screen button. still nothing!
what do I do???
(I also tried to use another fully charged battery! still nothing!)
ykurtser said:
I tried to install stock rom after CM9 was installed in my device.
odin got stuck in the middle and after that when I tried to open the device I was stuck in the "galaxy note N-7000" screen, and it wouldnt go into recovery, only to download mode.
when I tried to use odin again it got stuck in:
<ID:0/011> NAND Write Start!!
so I read this thread:
http://forum.xda-developers.com/showthread.php?t=1607011&highlight=nand+write+start
so I tried to flash the PIT file and odin got stuck again.
after that I pulled the battery out and now the power button wont do anything!
not even the smallest light on the screen.
I also tried to use combination with volume and home screen button. still nothing!
what do I do???
(I also tried to use another fully charged battery! still nothing!)
Click to expand...
Click to collapse
I am afraid that nearest samsung service centre is the next step my friend.
so you're saying after you pulled the battery and got it back in it doesn't goto download mode ? if you have a JIG try using it to force DownloadMode in case it does work and the pit doesn't work try re partition option with odin the partition (hopefully) just got messed and not the MOBO....
abhisahara said:
I am afraid that nearest samsung service centre is the next step my friend.
Click to expand...
Click to collapse
Not just the next step, but the only step...I second what Abhi said.
Hello, guys.
I was trying to install a new rom to my Galaxy Note. and when wiping out the user data (to get the phone ready to install the new rom) he phone reboot and got stuck on the start up logo. Waited for a long time but it didn't do any thing. So a remove the baterry and turned it back on. But but it did the same.
I then decided to flash it using Odin but it got stuck almost at the end of the proccess. Now my battery is almost dead and the only thing on the screen is a flashing message. Firmware upgrade encounter an issue.
HELP!!! THIS IS MY NEW PHONE!!!!
estebandilone said:
Hello, guys.
I was trying to install a new rom to my Galaxy Note. and when wiping out the user data (to get the phone ready to install the new rom) he phone reboot and got stuck on the start up logo. Waited for a long time but it didn't do any thing. So a remove the baterry and turned it back on. But but it did the same.
I then decided to flash it using Odin but it got stuck almost at the end of the proccess. Now my battery is almost dead and the only thing on the screen is a flashing message. Firmware upgrade encounter an issue.
HELP!!! THIS IS MY NEW PHONE!!!!
Click to expand...
Click to collapse
Which rom you were on before trying to flash? And what did you try to install?
Sent from my GT-N7000 using xda premium
I was on Android 4.0.3 the German realesed.
N7000XXLPY---------4.0.3---------2012 May
I downloaded it from the forum and it was working nicely. I just wanted to try a different rom. But I didn't get to do nothing just to clear the data which never ended and crash my phone..
Stuck after wiping user data, Odin hanging at the end..where exactly did it stop working?
I'd say that it's definitely superbricked.
you can do that:
- go on recovery (Try vol up + home + power)
- mount usb storage and put abyss kernel in a directory
- flash abysskernell4.00
- reboot recovery
- wipe data cache and dalvik
- power off
- power on
if it's stay on boot logo :
- power off
- vol down + home + power (download mode)
- flash your note with odin pc with this method
- dl mobil odin and flash ics open germany with this method
Noizy.
I will try that, but now i have to charged my battery to be able to do it.
When trying to flash the green bar on Odin gets almost to the end ot the proccess but then it just sits there and doesn't do anything...
estebandilone said:
I will try that, but now i have to charged my battery to be able to do it.
When trying to flash the green bar on Odin gets almost to the end ot the proccess but then it just sits there and doesn't do anything...
Click to expand...
Click to collapse
Could you paste the Odin log perhaps? That would help the people around here give you a solution, if any.
Right now I am downloading the files from the commment above... I will try that and post whatever it happened!!! My internet conection is just a Mega so it takes me a while to download all the files to try it... But I am almost done!!
This is what I have on Odin. It almost get to the end of the green bar.
<ID:0/012> Added!!
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> factoryfs.img
<ID:0/012> NAND Write Start!!
This is the message Showing..
Is your LPY Rom rooted? If yes, then how?
Did you flash CF-Root LPY kernel, or did you root it using Dr.Ketan's method?
This is a screen shot of the screen.
Yes it's rooted and I used Dr.Ketan's method..
I'm afraid you have a brick on your hands, mate. Take your Note to the
nearest service centre for MoBo replacement.
That I can't do. I bought from a third person... So I don't have any warranty... Let me ask you a question. The fact that I can get into recovery mode doesn't make a difference?
estebandilone said:
This is a screen shot of the screen.
Click to expand...
Click to collapse
Duno if this method will work for u but it works for me n my friend...
1stly i pressume u are able to boot into download mode...
2ndly, d/l a rooted GB Rom...
3rdly, restart pc/lappy
4thly, change another USB port (changed port works for me n my friend)
5thly, fire up PC Odin... put Note into download mode n connect...
Lastly select the rooted GB rom under "PDA"..
keep finger cross
Noted From My G.NOTE Using XDA Premium
I am trying again.
Not working... Don't know what to do
It's superbricked, for sure. All you can do is send it for repairs - motherboard replacement.
[Solve on [email protected]] Similar Case for reference
estebandilone said:
Not working... Don't know what to do
Click to expand...
Click to collapse
Hey dude, I had a similar case when I was upgrading my S2 officially because my USB was loose, I got the update 60% and came to a halt, my phone wasn't even rooted by then.
Here's what I did and here's what you can try:
1. root my phone (for your case, re-root your phone or even unroot then re-root it again, there may be some files damaged when your phone lost power).
2. install original kernel and Stock ROM (there might be original files which are needed from the original to make things work when you switch ROMs)
3. reboot and see if things are fine.
If you get back to running normal, then you can install whatever Custom ROMs you like.
Hope this help! Get back to me with the latest situation.
I dont have CWM installed. I can join only in Download Mode,
I am trying to install via PDA file with ODIN 1.85 it said:
ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013>
<ID:0/013> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-------------------------------------
When I try with Odin 4.43 it stocked at
<1> setup connection...
I have changed USB port on PC, nothing yet.
Did You installed Kies?
On what system are You trying to flash the phone?
On XP ODIN is not working, I flashed my i9001 with CWM on Windows 7 with ODIN and installed Kies without any problems.
aXiDroid said:
Did You installed Kies?
On what system are You trying to flash the phone?
On XP ODIN is not working, I flashed my i9001 with CWM on Windows 7 with ODIN and installed Kies without any problems.
Click to expand...
Click to collapse
Hello,
- I think thats my problem. I will try via Windows7 when I am ready too. I will reply.
Thank you.
No problem, just don't rush.
Flashing CWM takes a minute, after that the phone will reboot.
To enter to Recovery mode press Volume Up + Power and keep it pressed for 2 seconds after Samsung logo will appear.
BTW: If you encounter boot loop don't panic, just clear cache, data and dalvik and everything will be ok. I fixed boot loop on my phone by doing so.
edit: could you please press the THANKS button if I helped?
Are you using a pit file if so one correct for your device
Sent via that ninja standing right behind you
sider pyrgeds
Latrop said:
Are you using a pit file if so one correct for your device
Sent via that ninja standing right behind you
Click to expand...
Click to collapse
Hi,
- Yes I am using PIT file also but it stock at 'setup connection' with odin 4.43
- With odin 1.85 it said fail by this logs as below:
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013>
<ID:0/013> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed
Make sure you run Odin as admin and also try uninstalling device through device manager whilst its connected don't click delete driver software then unplug and replug also make sure you have full firmware to install should be a few files not just PDA in my experience
Sent via that ninja standing right behind you
aXiDroid said:
No problem, just don't rush.
Flashing CWM takes a minute, after that the phone will reboot.
To enter to Recovery mode press Volume Up + Power and keep it pressed for 2 seconds after Samsung logo will appear.
BTW: If you encounter boot loop don't panic, just clear cache, data and dalvik and everything will be ok. I fixed boot loop on my phone by doing so.
edit: could you please press the THANKS button if I helped?
Click to expand...
Click to collapse
Hi,
I cant run right now into CWM there is no CWM installed. Also I dont have SD Card on phone, is this problem?
Pretty sure cwm is either part of kernel or in some devices installed to system
Sent via that ninja standing right behind you
Latrop said:
Make sure you run Odin as admin and also try uninstalling device through device manager whilst its connected don't click delete driver software then unplug and replug also make sure you have full firmware to install should be a few files not just PDA in my experience
Sent via that ninja standing right behind you
Click to expand...
Click to collapse
You are right but it wont.
I am tryin to install this package: I9001XXKP4
PDA(PDA FILE), PHONE(Modem file), CSC (CSC FILE), PIT(PIT FILE) and Boot_loader
but its the same it stock.
Don't do bootloader I'm pretty sure and how long did you leave it cause once it took 15mins setup connection for me if you still don't prevail only option is try another computer
Sent via that ninja standing right behind you
You are talking about ClockworkMod, yes?
It replace Samsung's Recovery, if You flash it with ODIN there is no way it wouldn't run. Just turn the phone as I wrote before: Vol UP + POWER, and keep them pressed for 2, 3 seconds after Samsung logo appears. This will take you to recovery mode, and by so to CWM.
I'm using "recovery-clockwork-5.5.0.4-ariesve.tar", but the latest one is: "CWM6012-TOUCH-CM9-recovery". As far as I know for this moment.
There is the same also with Windows7 it won't flash.
noc1 said:
There is the same also with Windows7 it won't flash.
Click to expand...
Click to collapse
Have You installed Kies?
Download the newest, with is 2.3.3. Install it, reboot, put the phone in to download mode, turn the ODIN, select the files, connect the phone and hit the START button.
No way this wont work! I did so many times.
aXiDroid said:
Have You installed Kies?
Download the newest, with is 2.3.3. Install it, reboot, put the phone in to download mode, turn the ODIN, select the files, connect the phone and hit the START button.
No way this wont work! I did so many times.
Click to expand...
Click to collapse
I have installed Kies from official Web download samsung.
I am going to reboot now. And I will run again.
Thank you.
Latrop said:
Don't do bootloader I'm pretty sure and how long did you leave it cause once it took 15mins setup connection for me if you still don't prevail only option is try another computer
Sent via that ninja standing right behind you
Click to expand...
Click to collapse
I have wait about 18mins it stockat Setup connection..
Have you try to flash simple rom file onto the phone? Or Are you flashing the PDA file?
With "One Package" there shouldn't be any issues.
aXiDroid said:
Have you try to flash simple rom file onto the phone? Or Are you flashing the PDA file?
With "One Package" there shouldn't be any issues.
Click to expand...
Click to collapse
it doesn't work
can you please find me someone some pda or One package files for flash
noc1 said:
it doesn't work
can you please find me someone some pda or One package files for flash
Click to expand...
Click to collapse
You can download original newest Samsung's package from www.samfirmware.com - just create an account.
Download depends on Your country.
Download the file, use ODIN and select "One Package". Aries file will be needed to.
noc1 said:
I dont have CWM installed. I can join only in Download Mode,
I am trying to install via PDA file with ODIN 1.85 it said:
ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013>
<ID:0/013> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-------------------------------------
When I try with Odin 4.43 it stocked at
<1> setup connection...
I have changed USB port on PC, nothing yet.
Click to expand...
Click to collapse
For i9001 please refer to your WIKI http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001
you cannot use Odin 1.85, only Odin 4.43 with ariesVe.ops
IF "setup failed" in Odin its because KIES is running in system tray, you must shut it down for Odin to function
Open task manager and close:
Kies.exe
KiesTrayAgent.exe
KiesPDLR.exe
further reference refer to My Android Solutions link below
Hello all,
I've got a bit of a problem with my Galaxy S Plus I9001, hoping you can help.
I tried flashing a new ROM on the phone, but for that I had to install a recovery first, so I tried installing Clockword Recovery. Somewhere in the process however, it went wrong, and now my phone won't boot anymore.
When I boot it up regularly it comes up with an icon of a phone and a computer with an orange triangle inbetween.
I can get into download mode by holding Volume up + power + home, but if I connect it to Odin (v.3.07), it's stuck on this:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
I've been over a hundred different topics, trying to switch USB-ports and computers, using original USB-cable, but nothing seems to work. Phone is just stuck in Downloading.... mode all the time.
Does anyone maybe have any suggestions as to what I can do? Thanks so much in advance!
> When I boot it up regularly it comes up with an icon of a phone and a computer with an orange triangle inbetween.
= soft-brick. you can solve it
so.
Odin recognizes your phone in download mode? (in Odin, yellow case with indicated a COM port, i.e. COM 2 )
in this case try to return stock, using a guide like this
http://forum.xda-developers.com/showthread.php?t=1922505
when done, first change recovery, by odin, using Feamod recovery
http://forum.xda-developers.com/showthread.php?t=1331164
then you can change recovery to CWM or TWRP, this time by flashing the zip file in recovery mode, not by Odin.
let us know if you solve!!
dari78 said:
> When I boot it up regularly it comes up with an icon of a phone and a computer with an orange triangle inbetween.
= soft-brick. you can solve it
so.
Odin recognizes your phone in download mode? (in Odin, yellow case with indicated a COM port, i.e. COM 2 )
in this case try to return stock, using a guide like this
http://forum.xda-developers.com/showthread.php?t=1922505
when done, first change recovery, by odin, using Feamod recovery
http://forum.xda-developers.com/showthread.php?t=1331164
then you can change recovery to CWM or TWRP, this time by flashing the zip file in recovery mode, not by Odin.
let us know if you solve!!
Click to expand...
Click to collapse
Wow that did it! You sir, are a god among men, and you have my eternal gratitude, thanks so much!
I get a 'Status 7' error when I try to flash a custom ROM now, but I'll figure that out later for myself. At least I can get to use the phone again for now, thanks again!
TijsHofmans said:
Wow that did it! You sir, are a god among men, and you have my eternal gratitude, thanks so much!
I get a 'Status 7' error when I try to flash a custom ROM now, but I'll figure that out later for myself. At least I can get to use the phone again for now, thanks again!
Click to expand...
Click to collapse
glad to be helpful!
press thanks button to thank!
for the 'status 7' error follow this guide
http://forum.xda-developers.com/showthread.php?t=2302599