Related
New member and somewhat stupid for trying to do this:
Long story short I attempted to throw gingerbread 2.3.X on the phone and now its stuck in either download mode, recovery mode, or if i just turn it on it comes up and says "GALAXY S GT-I9000 Samsung" The last thing that was successful was putting the SpeedMod Kernel on it.
In recovery mode it says "ClockworkMod Recovery v2.5.1.0 SpeedMod ULFK" on top and bottom.
The phone started out with factory settings.
When i try and use the ODIN 3 and try to do the Mast Clear it says :
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> Master Clear Started.....
and then stays like that indefinately...
Same thing with hitting "start"
Please let me know how to fix this, I know there are some really brilliant individuals on this forum and it would be greatly appreciated.
search for odin, download it, follow the steps and flash back to stock. you'll be fine especially since you can get into download mode.
edit: gah you already have odin. do you have one click or the one where u have to put the pit and tar files?
the same advice applies though, find the stock files, and go into download mode, then plug it in and flash back to stock.
i think master clear only works when the phone is on and you have usb debugging enabled.
Ive got ODIN 1.7 and ODIN3. I can get them to both recognize the phone but when I try and hit "start" with v1.7 it ust sits there forever. and Im not able to get ODIN3 to do anything either.
Any way you could provide a more step by step solution?
If you're having problems with ODIN, something that seemed to work for me was to remove my SIM card.
Try removing it and see if you have any luck.
I dont have anything in the phone, no sim and no external.
Just left it alone for a bit and came back and turned the comp back on and everything worked for ODIN. Thanks for the help fellas
Hi I just decided to change my custom firmware to darkynote from rocketrom. It worked perfectly but I wanted to update my kernal also so afterwards i rebooted into recovery and installed version 2.6 of Abyss Note. Now My phone boots to the "Samsung Galaxy Note N7000" Screen and stays there unless i plug it in, then when i start it it goes to a frozen battery screen. I cant boot into recovery but i can boot into download mode. Can someone help me get my phone back to stock? I can't seem to find a tutorial anywhere that will work for me.
please help
edit: extra details, the Odin3 v1.85 process gets stopped at NAND Write Start!!
Here is the message feed:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKL7_N7000OXAKL7_N7000XXKL7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> factoryfs.img
<ID:0/006> NAND Write Start!!
Also tried using CF-Root kernal. no luck there. The Bar in Odin says KERNEL and the green bar is full, also stuck at NAND Write Start!!.
Someone respond, im gonna cry.
First Relax man, dont be in hurry, read this guide twice/thrice n calmly proceed...
It is nice still you can entre to download mode.
First get Stock firmware from here Type N700 in search field, it will show all available firmware, select you wish to flash n download
Note : If you select latest ROM KL7, you won't get Root + CWM, for that you have to Flash another ROM first, then You have to Root + CWM,then Install Mobile odin pro, now flash KL7 with Mobile Odin pro with 'ever root' option enable. If you selecting another ROM, ignore this note
Get odin n extract
Install:
Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly.
Extract tar file from the ROM you have download(password available at site from you have download). Put the phone into download mode (vol. down+home+power buttons),
Comlete close kies, if open. start odin, connect the phone via USB. Choose continue on the phone,
make sure that only two boxes are checked in odin - Auto Reboot and F.Reset Time.
Choose PDA button in Odin and select tar file you extracted before.
Choose START button.
The phone will reboot after the flash. Done.
Alright sounds good but i left it at the NAND write start thing overnight and when i came back it said this:
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Now I have a black screen and its flashing on and off with the frozen battery symbol. I think the battery is drained or something.
Also my download of the rom finished, there isnt any tar files its just a zip with an MD5 file and a Dll. Should i just but the MD5 file in the PDA section?
Edit: now my phone wont do anything when i try to put it in download mode.
Anyway if you are still able to entre Download mode, then try to flash stock kernel as i said above.
But thats what I mean, is it possible for the phone to not boot into download because the battery is dead or is my phone just bricked forever $850 dollars out the window.
tangelos said:
I cant boot into recovery but i can boot into download mode.
Click to expand...
Click to collapse
Actually i dont understand properly, your first post said U R getting into DW mode, if you can entre into boot mode, i guide you earlier, i cant say it bricked.
many time this happen after some error in procedure.
If you even not able to entre into Download mode, you need to entre it with JIG.
dr.ketan said:
Actually i dont understand properly, your first post said U R getting into DW mode, if you can entre into boot mode, i guide you earlier, i cant say it bricked.
many time this happen after some error in procedure.
If you even not able to entre into Download mode, you need to entre it with JIG.
Click to expand...
Click to collapse
Actually I was just updating you. At first it was working, then i tried a tutorial simmilar then the one you just gave me and it caused the phone to not turn on whatsoever. Can you link me to one of these "jigs". Thanks
You can get it readymade from market e.g. ebay or you can make it own home made
see here http://forum.xda-developers.com/showthread.php?t=819551
better first try with other battery once, if you cud manage
I was able to get a hold of one locally. When I plug it in, nothing happens. Any advice? Its for a GSII. Is that why? Or is it the battery thing. Before it stopped working completely, when i booted into download it would say low battery. Looks like its game over for my new phone .
I tried this with an old usb cable http://forum.xda-developers.com/showthread.php?p=20914895#post20914895.
Inserted the USB Jig afterwards. No luck
I suppose i have to take it to be J-tagged: http://toronto.kijiji.ca/c-buy-and-...-JTag-Service-Phone-Unlock-W0QQAdIdZ341742939
I'm sorry if this is not helping, or being so late, but I wanted to share my experience.
So, now can you enter the recovery menu by pressing the 3 buttons?
if you can then do a factory reset/wipe from the recovery and then flash an entire flashable ROM, maybe a stockROM or ROCKETROM.
you can upload ROCKETrom from the ordinary windows explorer , just copy and paste to the ex.SD.
the looping android animation actually happened to mine, and that's how I fixed it.
BTW: I didn't use Odin at all, or any other program.
Thanks for trying to help but this is completely irellavent. My phony CAN'T get into recovery and it NO LONGER CAN even get into Odin (download mode). I guess I wasn't clear when posting. Is anyone aware of a hardbrick fix or if sammy will repair ,my phone for a price.
Hi buddy. The EXACT same happened to be when trying to flash RocketV16. Frozen charge screen and everything.
To sort it I first let the phone start and hang on the black/white writing splash screen, removed the battery while it was on, held down the power button without the battery in for 3-5 seconds, put the battery back in. I then held Vol Down, the Home button and then the power down button (hold down power last) for some seconds until the Odin-Mode downloader came up.
After that I just followed a guide on flashing with Odin.
No more £9999999999 brick
unfortunatly i cant try that stratagy because i cant even get to the splash screen anymore. + i gave it to a local guy who claims to be able to jtag it. If it doesnt work ill send it to samsung and of course pay because i voided my warrenty. oh well. better then my old i9000m.
Galaxy Note N7000 Screen
I hate to hijack your thread but what I have to ask directly relates to your issue.
I have been searching for any file that contains this actual GALAXY Note Boot Screen - I am looking for this image file with the hope of making this my sole wallpaper/background. If there is anyway you or those who are reading this can PLEASE attach the file or at the very least provide a link so I 'd be able to download it for myself. I'd sincerely appreciate any help I can get.
I'm willing to pay ANY PERSON WHO PROVIDES A HIGH QUALITY IMAGE HOPEFULLY ALREADY SIZED FOR IMMEDIATE USE.
I'm sorry - please don't take this message as that of "shouting", My hope was to capture readers attention. Again, I apologize in advance for anyone having taken this message as shouting. That was not my intent.
Jim
connection
hey,i don't get how u manage to transfer stock firmware into the phone when pc cannot detect any file from the note???is it using odin??if yes,may someone share how to connect the phone to the pc via odin??
---------- Post added at 07:37 PM ---------- Previous post was at 07:27 PM ----------
hey how you manage to upload rocket rom,my pc cannot detect any file from my phone..even simple window explorer does not turn up..i hope u may help me...
me too Stuck at Galaxy Note Boot Logo
dr.ketan said:
First Relax man, dont be in hurry, read this guide twice/thrice n calmly proceed...
It is nice still you can entre to download mode.
First get Stock firmware from here Type N700 in search field, it will show all available firmware, select you wish to flash n download
Note : If you select latest ROM KL7, you won't get Root + CWM, for that you have to Flash another ROM first, then You have to Root + CWM,then Install Mobile odin pro, now flash KL7 with Mobile Odin pro with 'ever root' option enable. If you selecting another ROM, ignore this note
Get odin n extract
Install:
Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly.
Extract tar file from the ROM you have download(password available at site from you have download). Put the phone into download mode (vol. down+home+power buttons),
Comlete close kies, if open. start odin, connect the phone via USB. Choose continue on the phone,
make sure that only two boxes are checked in odin - Auto Reboot and F.Reset Time.
Choose PDA button in Odin and select tar file you extracted before.
Choose START button.
The phone will reboot after the flash. Done.
Click to expand...
Click to collapse
Dr Ketan,I have mentioned the same in your other thread about stucking at Galaxy Note Boot Logo forver.
I was on CheckRom v6 and then i went to flash a kernel and then got stuck at Galaxy Note Boot Logo.
I am not able to got to recovery mode by pressing power+home and vol+,but I can go to Download mode by pressing power+home and vol-.so i went to desktop Odin and tried flashing one of the rom(Dr Ketan Guide to Rooting).Seems like Odin was succesful but still stuck at Galaxy Note Boot Logo.
please need help here,I hope my Galaxy Note is not Bricked!
Try flashing a cf root kernel back
Sent from my GT-N7000 using XDA
Remkve battery for few min, thn put it back n try to enter recovery
If you able to enter recovery wipe cache n wipe data, thn reflash rom with pc odin.
Sent from my GT-N7000 using xda premium
Hello, guys.
I was trying to install a new rom to my Galaxy Note. and when wiping out the user data (to get the phone ready to install the new rom) he phone reboot and got stuck on the start up logo. Waited for a long time but it didn't do any thing. So a remove the baterry and turned it back on. But but it did the same.
I then decided to flash it using Odin but it got stuck almost at the end of the proccess. Now my battery is almost dead and the only thing on the screen is a flashing message. Firmware upgrade encounter an issue.
HELP!!! THIS IS MY NEW PHONE!!!!
estebandilone said:
Hello, guys.
I was trying to install a new rom to my Galaxy Note. and when wiping out the user data (to get the phone ready to install the new rom) he phone reboot and got stuck on the start up logo. Waited for a long time but it didn't do any thing. So a remove the baterry and turned it back on. But but it did the same.
I then decided to flash it using Odin but it got stuck almost at the end of the proccess. Now my battery is almost dead and the only thing on the screen is a flashing message. Firmware upgrade encounter an issue.
HELP!!! THIS IS MY NEW PHONE!!!!
Click to expand...
Click to collapse
Which rom you were on before trying to flash? And what did you try to install?
Sent from my GT-N7000 using xda premium
I was on Android 4.0.3 the German realesed.
N7000XXLPY---------4.0.3---------2012 May
I downloaded it from the forum and it was working nicely. I just wanted to try a different rom. But I didn't get to do nothing just to clear the data which never ended and crash my phone..
Stuck after wiping user data, Odin hanging at the end..where exactly did it stop working?
I'd say that it's definitely superbricked.
you can do that:
- go on recovery (Try vol up + home + power)
- mount usb storage and put abyss kernel in a directory
- flash abysskernell4.00
- reboot recovery
- wipe data cache and dalvik
- power off
- power on
if it's stay on boot logo :
- power off
- vol down + home + power (download mode)
- flash your note with odin pc with this method
- dl mobil odin and flash ics open germany with this method
Noizy.
I will try that, but now i have to charged my battery to be able to do it.
When trying to flash the green bar on Odin gets almost to the end ot the proccess but then it just sits there and doesn't do anything...
estebandilone said:
I will try that, but now i have to charged my battery to be able to do it.
When trying to flash the green bar on Odin gets almost to the end ot the proccess but then it just sits there and doesn't do anything...
Click to expand...
Click to collapse
Could you paste the Odin log perhaps? That would help the people around here give you a solution, if any.
Right now I am downloading the files from the commment above... I will try that and post whatever it happened!!! My internet conection is just a Mega so it takes me a while to download all the files to try it... But I am almost done!!
This is what I have on Odin. It almost get to the end of the green bar.
<ID:0/012> Added!!
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> factoryfs.img
<ID:0/012> NAND Write Start!!
This is the message Showing..
Is your LPY Rom rooted? If yes, then how?
Did you flash CF-Root LPY kernel, or did you root it using Dr.Ketan's method?
This is a screen shot of the screen.
Yes it's rooted and I used Dr.Ketan's method..
I'm afraid you have a brick on your hands, mate. Take your Note to the
nearest service centre for MoBo replacement.
That I can't do. I bought from a third person... So I don't have any warranty... Let me ask you a question. The fact that I can get into recovery mode doesn't make a difference?
estebandilone said:
This is a screen shot of the screen.
Click to expand...
Click to collapse
Duno if this method will work for u but it works for me n my friend...
1stly i pressume u are able to boot into download mode...
2ndly, d/l a rooted GB Rom...
3rdly, restart pc/lappy
4thly, change another USB port (changed port works for me n my friend)
5thly, fire up PC Odin... put Note into download mode n connect...
Lastly select the rooted GB rom under "PDA"..
keep finger cross
Noted From My G.NOTE Using XDA Premium
I am trying again.
Not working... Don't know what to do
It's superbricked, for sure. All you can do is send it for repairs - motherboard replacement.
[Solve on [email protected]] Similar Case for reference
estebandilone said:
Not working... Don't know what to do
Click to expand...
Click to collapse
Hey dude, I had a similar case when I was upgrading my S2 officially because my USB was loose, I got the update 60% and came to a halt, my phone wasn't even rooted by then.
Here's what I did and here's what you can try:
1. root my phone (for your case, re-root your phone or even unroot then re-root it again, there may be some files damaged when your phone lost power).
2. install original kernel and Stock ROM (there might be original files which are needed from the original to make things work when you switch ROMs)
3. reboot and see if things are fine.
If you get back to running normal, then you can install whatever Custom ROMs you like.
Hope this help! Get back to me with the latest situation.
I dont have CWM installed. I can join only in Download Mode,
I am trying to install via PDA file with ODIN 1.85 it said:
ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013>
<ID:0/013> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-------------------------------------
When I try with Odin 4.43 it stocked at
<1> setup connection...
I have changed USB port on PC, nothing yet.
Did You installed Kies?
On what system are You trying to flash the phone?
On XP ODIN is not working, I flashed my i9001 with CWM on Windows 7 with ODIN and installed Kies without any problems.
aXiDroid said:
Did You installed Kies?
On what system are You trying to flash the phone?
On XP ODIN is not working, I flashed my i9001 with CWM on Windows 7 with ODIN and installed Kies without any problems.
Click to expand...
Click to collapse
Hello,
- I think thats my problem. I will try via Windows7 when I am ready too. I will reply.
Thank you.
No problem, just don't rush.
Flashing CWM takes a minute, after that the phone will reboot.
To enter to Recovery mode press Volume Up + Power and keep it pressed for 2 seconds after Samsung logo will appear.
BTW: If you encounter boot loop don't panic, just clear cache, data and dalvik and everything will be ok. I fixed boot loop on my phone by doing so.
edit: could you please press the THANKS button if I helped?
Are you using a pit file if so one correct for your device
Sent via that ninja standing right behind you
sider pyrgeds
Latrop said:
Are you using a pit file if so one correct for your device
Sent via that ninja standing right behind you
Click to expand...
Click to collapse
Hi,
- Yes I am using PIT file also but it stock at 'setup connection' with odin 4.43
- With odin 1.85 it said fail by this logs as below:
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013>
<ID:0/013> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed
Make sure you run Odin as admin and also try uninstalling device through device manager whilst its connected don't click delete driver software then unplug and replug also make sure you have full firmware to install should be a few files not just PDA in my experience
Sent via that ninja standing right behind you
aXiDroid said:
No problem, just don't rush.
Flashing CWM takes a minute, after that the phone will reboot.
To enter to Recovery mode press Volume Up + Power and keep it pressed for 2 seconds after Samsung logo will appear.
BTW: If you encounter boot loop don't panic, just clear cache, data and dalvik and everything will be ok. I fixed boot loop on my phone by doing so.
edit: could you please press the THANKS button if I helped?
Click to expand...
Click to collapse
Hi,
I cant run right now into CWM there is no CWM installed. Also I dont have SD Card on phone, is this problem?
Pretty sure cwm is either part of kernel or in some devices installed to system
Sent via that ninja standing right behind you
Latrop said:
Make sure you run Odin as admin and also try uninstalling device through device manager whilst its connected don't click delete driver software then unplug and replug also make sure you have full firmware to install should be a few files not just PDA in my experience
Sent via that ninja standing right behind you
Click to expand...
Click to collapse
You are right but it wont.
I am tryin to install this package: I9001XXKP4
PDA(PDA FILE), PHONE(Modem file), CSC (CSC FILE), PIT(PIT FILE) and Boot_loader
but its the same it stock.
Don't do bootloader I'm pretty sure and how long did you leave it cause once it took 15mins setup connection for me if you still don't prevail only option is try another computer
Sent via that ninja standing right behind you
You are talking about ClockworkMod, yes?
It replace Samsung's Recovery, if You flash it with ODIN there is no way it wouldn't run. Just turn the phone as I wrote before: Vol UP + POWER, and keep them pressed for 2, 3 seconds after Samsung logo appears. This will take you to recovery mode, and by so to CWM.
I'm using "recovery-clockwork-5.5.0.4-ariesve.tar", but the latest one is: "CWM6012-TOUCH-CM9-recovery". As far as I know for this moment.
There is the same also with Windows7 it won't flash.
noc1 said:
There is the same also with Windows7 it won't flash.
Click to expand...
Click to collapse
Have You installed Kies?
Download the newest, with is 2.3.3. Install it, reboot, put the phone in to download mode, turn the ODIN, select the files, connect the phone and hit the START button.
No way this wont work! I did so many times.
aXiDroid said:
Have You installed Kies?
Download the newest, with is 2.3.3. Install it, reboot, put the phone in to download mode, turn the ODIN, select the files, connect the phone and hit the START button.
No way this wont work! I did so many times.
Click to expand...
Click to collapse
I have installed Kies from official Web download samsung.
I am going to reboot now. And I will run again.
Thank you.
Latrop said:
Don't do bootloader I'm pretty sure and how long did you leave it cause once it took 15mins setup connection for me if you still don't prevail only option is try another computer
Sent via that ninja standing right behind you
Click to expand...
Click to collapse
I have wait about 18mins it stockat Setup connection..
Have you try to flash simple rom file onto the phone? Or Are you flashing the PDA file?
With "One Package" there shouldn't be any issues.
aXiDroid said:
Have you try to flash simple rom file onto the phone? Or Are you flashing the PDA file?
With "One Package" there shouldn't be any issues.
Click to expand...
Click to collapse
it doesn't work
can you please find me someone some pda or One package files for flash
noc1 said:
it doesn't work
can you please find me someone some pda or One package files for flash
Click to expand...
Click to collapse
You can download original newest Samsung's package from www.samfirmware.com - just create an account.
Download depends on Your country.
Download the file, use ODIN and select "One Package". Aries file will be needed to.
noc1 said:
I dont have CWM installed. I can join only in Download Mode,
I am trying to install via PDA file with ODIN 1.85 it said:
ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013>
<ID:0/013> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-------------------------------------
When I try with Odin 4.43 it stocked at
<1> setup connection...
I have changed USB port on PC, nothing yet.
Click to expand...
Click to collapse
For i9001 please refer to your WIKI http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001
you cannot use Odin 1.85, only Odin 4.43 with ariesVe.ops
IF "setup failed" in Odin its because KIES is running in system tray, you must shut it down for Odin to function
Open task manager and close:
Kies.exe
KiesTrayAgent.exe
KiesPDLR.exe
further reference refer to My Android Solutions link below
Hi there!
I got this samsung galaxy s i9000 and i was using miui rom. there were a few things i didn't like so i wanted to switch to some other but when i turned of my mobile and used 3 buttons combo it only loaded to a downloading mod with this big yellow sign and was stucked there. so i wanted to turn it on normally but it only shows the galaxy s logo and afterwards screen with "powered by mackay kernel" and that cycles.
Is there a chance that me removing clockwork mod could cause that?
Need to fix that as soon as possible. Any advices?
AW: [Q] Cannot run my S I9000
The yellow triangle is the download mode and it's like fast boot mode on other device. It's a default feature.
If you are stucked a reboot you could try to pull the battery out for example 5min and wait, normally it fixes itself.
Sent from my Nexus 7
yes i read that a lot but it didn't work... even after half an hour i tried to turn it back on and it cannot load itself... and i have no internet connection either by t-mobile
also when i was inastaling miuis rom i used the 3B combo and it opened some sort of text mod where i chose to install it now it don't happen
Odp: [Q] Cannot run my S I9000
joasisk said:
yes i read that a lot but it didn't work... even after half an hour i tried to turn it back on and it cannot load itself... and i have no internet connection either by t-mobile
also when i was inastaling miuis rom i used the 3B combo and it opened some sort of text mod where i chose to install it now it don't happen
Click to expand...
Click to collapse
That text mod is called recovery mod. Press VolUp + Home + Power buttons. Then you may try to install rom again and reboot, after that phone should run.
AndroidCi said:
That text mod is called recovery mod. Press VolUp + Home + Power buttons. Then you may try to install rom again and reboot, after that phone should run.
Click to expand...
Click to collapse
problem is that i cannot get there it does the same thing as if i try to turn it on normally - cycling between samsung logo screen and mackay kernel screen
joasisk said:
problem is that i cannot get there it does the same thing as if i try to turn it on normally - cycling between samsung logo screen and mackay kernel screen
Click to expand...
Click to collapse
If you can reach the download mode, you should try to change your kernel via Odin. I don't know what kind of kernel you can use with your ROM but I'm pretty sure you can change it.
If it doesn't work with changing the kernel, try to change your ROM via Odin with download mode.
You need to have safe base.
If you have a problem with getting to cwm through 3-button combo try this:
pull out your battery, press vol up + home + power and insert battery, when your screen get on instantly release buttons.
From some time that's the only way to get into CWM on my SGS.
ok so i tried to flash odinrecovery but odin got stucked at nand write start...
joasisk said:
ok so i tried to flash odinrecovery but odin got stucked at nand write start...
Click to expand...
Click to collapse
What about flashing a new kernel? Not a recovery.
And did you try kronos111's method?
kronos111 said:
If you have a problem with getting to cwm through 3-button combo try this:
pull out your battery, press vol up + home + power and insert battery, when your screen get on instantly release buttons.
From some time that's the only way to get into CWM on my SGS.
Click to expand...
Click to collapse
didn't work now it don't even get to that loop it is stucked on black screen only able to get to download mode
Tell me more about your ROM.
What is your Android version? Your kernel? And what's the name of your ROM?
Cassis1978 said:
Tell me more about your ROM.
What is your Android version? Your kernel? And what's the name of your ROM?
Click to expand...
Click to collapse
I had MIUIs rom it was flashed in december but i don't remember the version and i had mackay kernel
Go into download mode and flash your miui kernel once again as PDA - odin or haimdall. If your phone still doesn't boot than you'll have to flash 3-file GB with pit and re-partition. I use JW1 for this kind of reseting system
kronos111 said:
Go into download mode and flash your miui kernel once again as PDA - odin or haimdall. If your phone still doesn't boot than you'll have to flash 3-file GB with pit and re-partition. I use JW1 for this kind of reseting system
Click to expand...
Click to collapse
actually i cannot find any kernel in .tar or any manual which files from zip should i put in tar file
i suppose you had JB MIUI so you can use semaphore kernel if it was 4.1 use 2.6.5 if 4.2. latest version
kronos111 said:
i suppose you had JB MIUI so you can use semaphore kernel if it was 4.1 use 2.6.5 if 4.2. latest version
Click to expand...
Click to collapse
got this with booth of them
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
than nothing
change USB port, connect cable directly to motherboard (no USB hub)
kronos111 said:
change USB port, connect cable directly to motherboard (no USB hub)
Click to expand...
Click to collapse
using laptop no hub after about half an hour i got
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
failed also on other port
heimidal don't even recognize the phone when i connect it...
phone only turns into downloading mod now anithing else... :crying:
joasisk said:
heimidal don't even recognize the phone when i connect it...
phone only turns into downloading mod now anithing else... :crying:
Click to expand...
Click to collapse
It seems that Odin recognizes your phone.
Do you have Kies on your computer?